I have 2 windows PC and a linux as router in the linux there are 2 NIC eth0 and eth1. I created DHCP on eth0 and manually configured on eth1. My eth0 gateway was 192.168.26.253 and my eth1 was 192.168.22.253. I needed to ping the 192.168.26.x WinPC1 to WinPC2. What command I will use on linux so that the WinPC1 can ping to WinPC2.
View 6 Replies
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I want to implement routing using fedora 14. The following is how I arrange my computers -
[PC1]<=======>[ROUTER]<=======>[PC2]
And the following are the configuration -
PC1 : (Tiny Core Linux)
eth0 192.168.2.2/24 (netmask 255.255.255.0)
ROUTER (FC14)
eth0 192.168.2.1/24 (netmask 255.255.255.0)
eth1 192.168.4.1/24 (netmask 255.255.255.0)
PC2 (Tiny Core Linux)
eth0 192.168.4.2/24 (netmask 255.255.255.0)
On the ROUTER I have set the ip_forward=1 and eth0.proxy_arp=1 and eth1.proxy_arp=1
then I run the following command :
route add -net 192.168.2.0/24 gw 192.168.2.1 dev eth0
route add -net 192.168.4.0/24 gw 192.168.4.1 dev eth1
On PC1 I executed the following :
route add -net 192.168.4.0/24 gw 192.168.2.1 dev eth0
and for PC2 I run the following
route add -net 192.168.2.0/24 gw 192.168.4.1 dev eth0
After doing those things, I can't ping between PC1 and PC2... but both can ping the router...
I am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
View 5 Replies View RelatedI have a firewall, this consists of three NIC's:
Code: eth0[192.168.0.2] eth1[192.168.1.2] and eth2[10.10.165.2]
I am trying to ping eth0 from eth2, but I am not able to succesfully get a response from pinging the device, I am using:
Code: ping 192.168.0.2 -I eth2
I have tried to insert routing data into the routing table, but it still doesn't work
I am working behind a http proxy (172.30.x.x:3128). I have configured it in my terminal. All the applications such as wget,lynx firefox etc. are working correctly.However all dns utilities like nslookup, host and even ping too are not working.Following is output of host command:
Code:
root@ding:~# host google.com
;; connection timed out; no servers could be reached
Output of host -T:
[Code]....
To connect to net I have to first run dhclient3(learnt from this forum!).It gives me my ip but where is dns address sent I don't have and idea.
When I execute a command (ping or telnet or ssh) on ip 192.168.0.20 it is ok.
If I execute the same command on
ip 192.168.0.020, it looks for
ip 192.168.0.18 instead of
ip 192.168.0.20
And it's the same for others ip if I put a 0 ahead last byte.
If I type
Code:
$ ping [URL]
or even
Code:
$ ping google.com
should I receive a reply?
Let's say I am pinging a host, and want to output to a file each reply and its timestamp of when this started.
I know that it can be done with a loop and a shell script. Something like this
DO
echo "$(date)" >> results.txt ###includes the time and outputs results to txt###
ping -c 4 HOST >> results.txt ###a total of 4 pings at a rate of 1 per second###
REPEAT UNTIL USER PRESSES CTRL-C
Now, my first issue is that I need to be able to see results real-time as well.
Is there a way one can print to BOTH a screen and output? If one uses the ">>" command, it is essentially sending everything to the file. Running another ping command in parallel is not an option.
I try to use the "ping -a" command for getting an audible ping. But there is just silence The command "beep" works fine, so everything should be ok with the speaker (in the konsole).
View 3 Replies View RelatedIve got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedI have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I try to ping with php : exec("ping -n 1 $ip",$output[],$retval); it works fine in window. but in linux i got this error : ping: icmp open socket: Operation not permitted are there any ways to solve this ?
View 5 Replies View Relatedi know exactly what i need to do, im just not familiar enough with command line to do it properly.i have 7 computers.the first 4 are connected to a router via wireless at one end of the house. of the last 3 only 1 will be able to access the router via wireless, so it needs to share it's one wireless connection via ethernet. this computer i'm going to call 'server'server will have two IP'swlan0 192.168.1.6 this connects to the router that has internet access.eth0 i intend to have the following settingsip:192.168.0.1sub: 255.255.0eth0 will connect to a second router, where the cat5 cable goes from the server, into the internet port of the router where i will define the router's static IP:IP: 192.168.0.100sub: 255.255.255.0gateway 192.168.0.1i have then set the router IP for LAN handling as 192.168.27.1 and all ethernet connections will have a 192.168.27.x IP.
so i need to know how to, without a gui application, use the terminal to assign server eth0 a proper IP address, and tell the server to take the connection it has and share it through eth0 to supply internet for the last 2 computers via ethernet.i had it set up in this way with a windows machine being the one that had the wifi access, but i'd rather have it setup for the ubuntu server to do this task. security is imperative for these 3 remaining machines, so just getting 2 more wifi adapters for a connection to the initial router isn't an option.the 2 that connect to server do so through SSH and though server IS connected via wireless it only makes outward connections through
I can't get exec ping to work on my system. wish is located in /usr/bin/wish8.4
Code:
#!/usr/bin/wish8.4
text .txt
set in [open "/root/hosts.txt" r]
while {[gets $in line] != -1} {
[Code]....
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
I run the ping command using system() in C. It start pinging the desired destination but when I close my application it continues to ping. Is there any solution that as soon as I close my application it also stops pinging. Any change required in my C code?
View 2 Replies View RelatedMy setup is...I have a wireless access point using laptop as a gateway. The AP is also connected to a switch as is the laptop. So the laptop has two interfaces one wireless and one wired. A third device is using the AP to connect to a server on the internet. The AP sends the packets to my laptop where they are dropped. I've been looking for a solution to this problem without success. Basically is there a way for my laptop to forward all packets it sees from a certain IP address to whatever destination address they have?To clarify, my laptop is just the gateway of the AP and none of the packets are addressed to it at all, it just picks them up using a sniffer or similar tool.
View 1 Replies View RelatedI have a pc with debian 6 (without GUI) installed on it and want to use it as server at home. It has 2 ethernet nics. Now i want to configure the routing process. Searched internet for a long time found something but couldn't get it work.
View 8 Replies View RelatedWhen setting up an SSH proxy, I know you can configure Firefox to route DNS requests through the proxy. Is this possible from linux directly? I'm trying to use wget through the proxy, including DNS lookups.
View 3 Replies View RelatedI have two subnets which I am interested in connecting.
Some basic network details:
Subnet A:
Subnet B:
I am trying to think of any further relevant details, but that seems to be it to me. If I forgot anything, please tell me.
Ok the question. WHAT do I type? (Explicitly!) And WHERE do I type it? In order to reach ubuntu-01.tec.lan, or ubuntu-02.tec.lan from perpetrator.tec.lan or rapine.tec.lan?
I'm interested in using actuall ROUTES. I can already achieve results similair to this with either a NAT firewall, or with VPN.. but that's not what I am interested in.
From what I have found out so far, I should need something like the following:
On Gateway 1B:
Code:
And on Gateway 1A:
Code:
I'm newbie to Wireless. Currently I try to implement EAP-TLS but firstly I need to get the hardware work, allow Access Point to Route from Wireless to Wire (LAN DNS server).
View 4 Replies View RelatedI am having some trouble setting up routing on my Ubuntu 9.10 Server. I have the GUI installed with Webmin and OpenVPN Heres the setup :
1 NIC - WAN - eth0 - IP: 146.231.x.x SUBNET: 255.255.252.0
1 NIC - LAN - eth1 - IP: 192.168.1.1 SUBNET: 255.255.255.0
1 NIC - ADSL - eth2 - dynamic
What I need to do is the following.
All users are connected to the LAN.
All requests for IP range "146.231.x.x", and "domain.com" need to be routed from LAN (eth1) to WAN (eth0).
All other internet requests need to be routed to ADSL (eth2).
-> I have the masquerading in the linux firewall working for NAT, but all traffic goes to ADSL (eth2).
-> I am using OPEN-VPN over the ADSL also.
-> DHCP and DNS work fine.
I also need all ports opened with the route (from eth1 to eth0)
I am looking for a command line utility like ping that can use for checking appropriate services on a server . I do not want do any port scan . I just want to use it for checking apache , mail,ftp and other services on a server if they are running or down.
View 3 Replies View Relatedhow to write a command (for loop) that would ping a Class C subnet to make it so that it only replies once and does not show the statistics?
View 2 Replies View RelatedI want to use tab networking in my kvm with routing.Can any one guide me how i can do it. i have been reading different guides over the net but not understand any one clearly.I have read this[URL].. One problem is this all my server are remote and no gui is running.I am able to install kvm with ssh console with -nographic and -x "console=ttyS0" option now i want to change from bridging to tap networking with routing.And i have live ip on kvm guest/Virtual machine.
View 1 Replies View Related
