On the ROUTER I have set the ip_forward=1 and eth0.proxy_arp=1 and eth1.proxy_arp=1
then I run the following command :
route add -net 192.168.2.0/24 gw 192.168.2.1 dev eth0
route add -net 192.168.4.0/24 gw 192.168.4.1 dev eth1
On PC1 I executed the following :
route add -net 192.168.4.0/24 gw 192.168.2.1 dev eth0
and for PC2 I run the following
route add -net 192.168.2.0/24 gw 192.168.4.1 dev eth0
After doing those things, I can't ping between PC1 and PC2... but both can ping the router...
I have 2 windows PC and a linux as router in the linux there are 2 NIC eth0 and eth1. I created DHCP on eth0 and manually configured on eth1. My eth0 gateway was 192.168.26.253 and my eth1 was 192.168.22.253. I needed to ping the 192.168.26.x WinPC1 to WinPC2. What command I will use on linux so that the WinPC1 can ping to WinPC2.
All routing settings made with the ip tool (route command) are lost when the redhat server reboots.How to save routing information to a configuration file?
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
I am playing with openvpn, and I got stuck.I am using ubuntu server for openvpn server, which has 2 physical NICs, one is directly on internet and other is LAN, where few pcs are connected on.
I have a desktop computer (Ubuntu) connected to one of the LAN ports of the Cradlepoint MBR1000 router via an Ethernet cable. I also have a Verizon mobile broadband USB modem (USB760) plugged into the USB port of the Cradlepoint router.I also have a laptop (Ubuntu) with a wireless wi-fi adapter (802.11g). The laptop also has an Ethernet card but I'm not using it. The desktop computer does not have a wi-fi adapter, only the laptop does.
With the above setup, I have Internet access to both the desktop computer as well as the laptop computer, which I am well pleased with.Is there a way I can have file sharing between the desktop and the laptop, or at least ping between them, the way I have it set up? I can't use the ad-hoc method because for that to work each computer needs a wi-fi adapter. The router is using DHCP but can also be configured manually.
I have a debian server installed with a static ip. Now i am able to ping my ip, but when i try to configure a domain name with the nameserver as my ip, i am not able to ping the domain name
I have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I want to use tab networking in my kvm with routing.Can any one guide me how i can do it. i have been reading different guides over the net but not understand any one clearly.I have read this[URL].. One problem is this all my server are remote and no gui is running.I am able to install kvm with ssh console with -nographic and -x "console=ttyS0" option now i want to change from bridging to tap networking with routing.And i have live ip on kvm guest/Virtual machine.
IN LAN default GW box I have a routing rule of 172.17.1.0 192.168.180.100 255.255.255.0 UG 0 0 0 eth3 that sends packets matching 172.17.1.0/24 to eth3 etc. When I ping 172.17.1.50 - it goes correctly when ping is issued in the same box (LAN GW) - falls through to default rule when the ping is done in LAN's boxes i.e. it goes to the LAN GW box and then to Internet incorrectly instead of going to eth3 and 192.168.180.100.
Is there any way of seeing why the packet matches or not the routing rules?
I have a Pc that has 2 Ethernet and I have also 2 switch. I want the PC to become the router and be connected to 2 switch.How can I setup this one on FEDORA and I want to assigned for eth0 192.168.26.51 and eth1 192.168.22.51 for the IP.
I have just installed Fedora 10 on an old laptop and was quite impressed with how smoothly it all went ... until it came to setting up networking!
I have battled for three days now and I'm almost there; - installed updated firmware to the built in Broadcom 4306 wireless network adapter - got NetworkManager to work with a static ip address by manually editing the ifcfg-wlan0 file - managed to get the WPA security to work
The only problem I am left with is that there is no default route; if I set one up using: ip r a default via 10.1.1.1 dev wlan0
Then everything starts working.
If I try to add routes using the NetworkManager gui interface they dont get saved (no suprises there then! ).
I have tried creating a route-wlan0 file in /etc/sysconfig/network-scripts/ but this seems to be ignored by NetworkManager.
Since the NetworkManager GUI is almost useless, does anyone know if there are any other configuration files I can manually modify to get a default route set?
On a Fedora 11 machine, I configured ppp0 on eth0 and ppp1 on eth1, each one is connected to a modem, I also defined ppp0 as the default gateway.. Should I do anything else to load balance the 2 connections or will ppp1 take some of the load by default? Should I add any other routing rules? If yes then please tell me what should I add, keeping in mind that for each pppoe connection both the pppoe address and the remote address are not static so I actually needed some scripting to change the default gateway each time the remote pppoe address changes.
I'm currently reading through the Linux Advanced Routing and Traffic Control HOWTO from lartc.org, and I'm wondering whether anyone knows of a file where I could keep qos rules persistent across a reboot, similar to /etc/sysconfig/iptables for netfilter. Should I just write my own script, or does something already exist? By the way, iproute-2.6.29-4.fc12.i686.
I have a problem with the activation of routing under fedora. The problem lies exactly in the file ip_forward who I didn't not change the value to 1. When I use the command echo 1> / proc/sys/net/ipv4/ip_forward. They appears not granted permission. Knowing that I use the root account.
i have a Server, which has 2 nics installed. Each of those is connected to a router, which is connected to internet. On the server, i have apache, maillserver and im-server running. On the other hand, also squid, dansguardian and clam are running. so now: via eth0 i would like to have just the traffic, which is requested from outside (the big bad internet..) to my server (apache, mail, etc). via eth1 i would like to have all OUTGOING (also to the big bad internet) from the server, which is requested by a internal client. And of course all requests to my own server
both nics shall route their traffic to their own router. For better comprehension please consult the enclosed graph. Until now, i did not find a good solution, the default route is set to the traffic from eth0, if not, no external request will find back to a client do you have a idea how to handle this the easiest way?
I don't know what I'm trying to achieve falls into 'routing' or 'Bridging'???I have two network ports (with static IP ) and I would like to forward RX packets of one to the other.
I have done this in Windows by enabling a service called 'routing'.Is there something similar in Fedora 11? I am pretty sure there are a few thread explaining these but I am just not educated enough to find one that makes sense to me, so Please excuse me for starting a redundant thread and point me to it?
I am having trouble for routing port 80 from a Billion adsl modem to a guest server in VirtualBox. There are quite few different changes from my last setup so I kind of confuse which one is wrong.
I used to use have the setup belowusing modem Linksys WAG354G use static ip 192.168.1.100 for my machine use static ip 192.168.1.102 for my guest VirtualBox server guest OS is serving http listening on port 80 i use bridge from my host OS for VirtualBox set my modem to direct all traffic on port 80 to 192.168.1.102 host OS was Fedora 11
now I useusing modem Billion 7404VNPX use same static address and configuration host OS is Fedora 13
main issue is I cannot reach the guest OS if I navigate to my modem ip address. (e.g. http://192.168.1.1) if I change the modem to direct all traffic to my host OS ip address (192.168.1.100) it works nicely.
I have tried to disable and enable the firewall without any luck.
I'm having trouble to configure my debian (2.6.26-2-686) with some routing tuning. In fact, I have a VPN provider. I want my Squid Proxy use this VPN provider and I have to use policy routing because my ISP forbid IP spoofing.
I need to be able to do the following: Physical Router located at 192.168.40.1 On Ubuntu 10.04 Lucid machine:
eth0 with static ip 192.168.40.2 eth1 with static ip 192.168.40.3 eth2 with static ip 192.168.40.4
Associate a virtual address to eth1 with an entirely different network address such as 192.168.50.1 Do the same (virtual address) for eth2 -- e.g. 192.168.60.1 In the application:
register phone number A at 192.168.40.1 (The application will automatically use eth0 for this) register phone number B at 192.168.50.1 register phone number C at 192.168.60.1
Somehow forward all traffic (including the register request) sent to 192.168.50.1 to 192.168.40.1 as if the register had been made directly to 192.168.40.1. In other words, the app "sends" registration and traffic to 192.168.50.1 but then Ubuntu forwards it to 192.168.40.1 (but the app does not know that). Similarly, forward all traffic sent to 192.168.60.1 to the router at 192.168.40.1.
Do the same for the reverse, forward all traffic that the router sends back to 192.168.40.3 (eth1) to 192.168.50.1 (within the Ubuntu machine) so that the app knows it is for phone B. Similarly forward all traffic that the router sends back to 192.168.40.4 (eth2) to 192.168.60.1 so that the app knows it is for phone C. Thus, the application believes that it is registering at 3 completely separate routers on 3 completely separate networks via 3 separate network interfaces but in fact is really registering all three to the same router (but does not know that). Similarly, the router believes that it is receiving 3 separate registrations because it receives each registration request and traffic from 3 separate interfaces and thus 3 separate mac addresses (i.e., of eth0, eth1, and eth2). Traffic sent to and from the router for each of the 3 phone numbers (via eth0, eth1, and eth2) are not mixed because the translation happens in both directions.
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
I have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
For some reason some command line commands are unable to resolve urls, whereas other commands work as they should. I have checked most setting but am unable to find out what is wrong and am no closer to figuring out what and why.
[root@subzero ~]# yum update Loaded plugins: refresh-packagekit [URL]: [Errno 4] IOError: <urlopen error (-2, 'Name or service not known')> Trying other mirror. Error: Cannot retrieve repository metadata (repomd.xml) for repository: atrpms. Please verify its path and try again [root@subzero ~]# .....
My ISP (Insight if you know them) says I had open ports. OK I did! Shame on me! I'll blame my $15.00 router but I know it's my fault. OK took care of that.But when I run Shields Up from grc.com it keeps telling me it can ping (IMCP) me. I tried to get the firewall to stop, or drop the ping and it seems to on my local network, I can't ping my my boxes locally and I can't even ping my router. But Shields Up keeps telling me it can ping meAny one know how I can see what's sending the ping, or I guess they call it the pong, back to echo the ping?