Networking :: Host And Ping Command Not Working
Feb 28, 2010
I am working behind a http proxy (172.30.x.x:3128). I have configured it in my terminal. All the applications such as wget,lynx firefox etc. are working correctly.However all dns utilities like nslookup, host and even ping too are not working.Following is output of host command:
Code:
root@ding:~# host google.com
;; connection timed out; no servers could be reached
Output of host -T:
[Code]....
To connect to net I have to first run dhclient3(learnt from this forum!).It gives me my ip but where is dns address sent I don't have and idea.
View 14 Replies
ADVERTISEMENT
Jan 19, 2010
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
View 2 Replies
View Related
Jul 15, 2011
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
View 2 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Jan 19, 2010
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
$ ping -c3 192.168.0.55
fails
View 2 Replies
View Related
Sep 26, 2010
I made an ip packet using raw sockets and used icmp header of echo request inside that ip packet.I have a wifi lan with 2 host(laptops) connected to it. when I send the packets to any of these host the reply me with echo reply as i see in wireshark. but when i change the source ip and mac to that of another host there is no echo reply packet in the network but only echo request packet is there. Can anybody tell me why is this happening. and am also using Promiscuous mode so non of the packet is discarding.
View 3 Replies
View Related
May 9, 2011
I have a server that I can ping, and I can connect remotely with ssh to it. But when I try to connect to apache (port 80) I get "no route to host". But I can connect to localhost It's not just my client system that is having this problem but also systems that are on the same subnet There is no firewall running on the server route on the server
[Code]...
View 9 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
Apr 5, 2010
I am using ubuntu 9.10 and I still cannot figure out this thing. I work behind a proxy managed by my university. Now, I cannot ping the other users on my network although they can ping me. Not to mention, I also cannot ping [URL]... It says : ping: unknown host [URL]... But I can ping the proxy server.
View 4 Replies
View Related
Aug 11, 2010
I have a somewhat complicated network setup that I am testing on an internal network. I have the following route setup:
PC Client (192.168.2.100) --> Router (192.168.2.1) --> DSLAM (on our internal network) --> PPPOE Server (192.168.9.1) on Linux Ubuntu 8.04 on interface card eth2.
On the same Linux Ubuntu Machine on interface card eth1 (static IP 192.168.5.100), I have an Asterisk SIP server plugged into it. SIP Server = 192.168.5.101 (static) I need the PC client (192.168.2.100) to register via SIP soft phone to register on the SIP server (192.168.5.101). From the PC client I can ping as far as the eth1 interface (192.168.5.100)...but cannot ping the SIP Server (.101).
From the SIP server (192.156.5.101)...I can ping 192.168.5.100, I can ping 169.254.5.228 (Eth2:avahi), but not sure what that is. I cannot ping the pppoe default gateway (192.168.9.1), which I think you cannot anyway. No firewalls are running. My IPtables I cleaned out totally. I think it might be as simple as a route add, but I really have no clue. Tried building a virtual bridge using brctl LINUX betweeh eth1 and eth2, but that made things worse (could not ping anything after that)
Route table:
Destination Gateway Genmask Flags Metric Ref Use Iface
192.168.9.100 * 255.255.255.255 UH 0 0 0 ppp0
192.168.5.0 * 255.255.255.0 U 0 0 0 eth1
[code]...
View 1 Replies
View Related
Dec 28, 2010
If I try ping a host on my internal lan from my ubuntu notebook the host name never resolves, but if I ping www.domainname.xxx it will resolve because our dhcp server is setup as the dns server too. If I use the connect to server tool and select samba share and specify host by name, it can resolve that and the shares show up... same dns server, same machine, but different interface/program. My real reason behind this is because my synergy+ keeps falling over whenever the synergy servers dhcp lease expires and it gets a new I have to then specify the new address and change configs.
View 3 Replies
View Related
Jun 15, 2010
I had configured Squid in RHEL 5 and facing an issue with pinging. Not able to ping any website,hostname is resolving to ip address but not able to ping
[code]...
View 8 Replies
View Related
Aug 17, 2010
I can ping a host on my LAN successfully, but I cannot ping [URL]... for example. I have disabled the firewall and set http_proxy and can browse the internet with "Use system proxy settings" checked in Firefox. I am unable to update with yum either, but I am not sure if this is a side effect or not. I have run a trace on my ip address as I am browsing the internet and I can see the sites I am visiting on our web appliance. However, if I try to ping or update no requests are hitting the proxy so I don't think that is the issue.
View 6 Replies
View Related
Dec 4, 2010
I've encountered a problem after doing a fresh install with xubuntu 10.10 (2.6.35-23-generic).some sites are blocked like [url]....if I do dig [url]....- I receive the A, CNAME records and the IP address and everything.when ping[url].... - I receive 'unknown host'.when ping <theipaddress> - I receive responses
View 2 Replies
View Related
Jan 25, 2010
I have a machine running linux with 3 ethernet interfaces attached.
My Ifconfig:
My route output:
eth0 is attached to a laptop, eth1 is attached to a PC. eth2 is attached to a DSL modem, and the server is successfully acting as my internet gateway. The trouble is, my PC cannot see my laptop and vice versa. E.G. cannot ping, host seems down.
View 5 Replies
View Related
May 27, 2010
This is a RHEL 5.4 install. I did a fairly routine install setting up a static IP address of 10.5.96.10, a subnet mask of 255.255.254.0, and a gateway of 10.5.96.1 with the standard DNS setup for this network. These are all standard network setting for this network and otherwise work fine on other systems. The IP, gateway, and subnetmask all appear correctly on all relevant configuration files. This server can not ping any other system on the network and can not ping its default gateway. No other systems can ping this one either. Also this system can not ping "localhost" or its own hostname. The hosts file contains the line:
[code]...
I can ping 127.0.0.1 and 10.5.96.10 and it works fine. Also the firewall is disabled. I know I probably can't get a straight forward fix with the information I have on hand right now, I'm more of a Debian guy, so there might be some Red Hat intricacies I'm not familiar with. I think I had a CentOS install some months back that had this issue and I don't remember how I fixed it, or if I even did. I might have just replaced it with Debian. That's unfortunately not an option this time around since it's not my box.
View 4 Replies
View Related
Feb 16, 2010
I can't get exec ping to work on my system. wish is located in /usr/bin/wish8.4
Code:
#!/usr/bin/wish8.4
text .txt
set in [open "/root/hosts.txt" r]
while {[gets $in line] != -1} {
[Code]....
View 2 Replies
View Related
Mar 17, 2011
A brief description of my network:It is a small home network consisting of an Ubuntu 10.04LTS server edition, an Iomega ix2 NAS, a WinXP pro server and several family laptops.This is all routed through a Netgear WNDR3300 home router. All are assigned IP's via DHCP and all but the laptops are static (via DHCP though). The WAN address/DNS is assigned via DHCP from my ISP.The problem:When one of the machines is offline, Ubuntu does not resolve the netbios name correctly. No surprise here. But what is happening is that it is finding some arbitrary machine on another network. Below is what a ping to an offline host reveals:
Code:
ping -c3 hostname
PING hostname (204.232.162.92) 56(84) bytes of data.
[code]....
View 9 Replies
View Related
Mar 28, 2010
After I applied below iptables rule.. I am unable to ping the host in 172.16.1.0/24 from OpenVPN client
View 1 Replies
View Related
Jul 17, 2009
I have a strange problem for internet. My clients (winxp - S2) can't get internet.Let me explain my scenerios. Fedora 10 with lan (eth0) having direct internet from dsl model, client (XP service pack 2) can use samba shares using dhcp (wlan0) installed in Fedora 10 box. client can ping my linux box.Now problem is: client (dosbox) can ping the google ip address (i.e ping 74.125.39.106) but can't use 'ping www.google.com'. That means ping with ip works for internet from my client. My linux box can. I can use internet from FC10 but can't use iexplorer from my client to have internet. I have enable ipmasquarding in Firewall and dhcpd is running on wlan0 for dynamic ip address of my clients.Can someone suggest me what kind of problem having I? What should i do to success iexplorer for internet? what possibly am i missing?
View 3 Replies
View Related
Aug 20, 2010
I have the following command:ssh $USER@$HOST "ls /ops/pkg/ec/`grep "PKRTS" /ops/pkg/ec | awk '{print $1}'`* > /tmp/tmp_file"What the above SHOULD do..is, ssh to the host then execute the command.The command should first execute the grep and awk between the back ticks, and generate a file name, then ls using that filename* and write that data to a temp file.However, it executes the grep and awk before even SSH'ing and the command that goes to the server is simply an "ls /ops/pkg/ec/* > /tmp/tmp_file" since the grep and awk return nothing on the local machine.
View 1 Replies
View Related
Sep 21, 2010
What does these messages in PING mean?
Code:
PING 192.25.141.248 (192.25.141.248) 56(84) bytes of data.
From 192.25.141.229: icmp_seq=1 Redirect Host(New nexthop: 192.25.141.248)
[code]....
View 4 Replies
View Related
Nov 25, 2010
When I execute a command (ping or telnet or ssh) on ip 192.168.0.20 it is ok.
If I execute the same command on
ip 192.168.0.020, it looks for
ip 192.168.0.18 instead of
ip 192.168.0.20
And it's the same for others ip if I put a 0 ahead last byte.
View 6 Replies
View Related
Apr 8, 2010
If I type
Code:
$ ping [URL]
or even
Code:
$ ping google.com
should I receive a reply?
View 9 Replies
View Related
Jan 7, 2011
I have 2 windows PC and a linux as router in the linux there are 2 NIC eth0 and eth1. I created DHCP on eth0 and manually configured on eth1. My eth0 gateway was 192.168.26.253 and my eth1 was 192.168.22.253. I needed to ping the 192.168.26.x WinPC1 to WinPC2. What command I will use on linux so that the WinPC1 can ping to WinPC2.
View 6 Replies
View Related
Aug 26, 2009
I have 2 live IP based Linux systems .
[Code]...
Both systems connected in same LAN based network . Both WAN live ips are connected through different modems. Problem is that , no system is able to ping or connect with other system with Live ip , though they are able to connect through LAN ip and both systes are accessable and also able to browse internet (google etc..) Ping error :-- Destination Host Unreachable.
View 2 Replies
View Related
May 3, 2011
Let's say I am pinging a host, and want to output to a file each reply and its timestamp of when this started.
I know that it can be done with a loop and a shell script. Something like this
DO
echo "$(date)" >> results.txt ###includes the time and outputs results to txt###
ping -c 4 HOST >> results.txt ###a total of 4 pings at a rate of 1 per second###
REPEAT UNTIL USER PRESSES CTRL-C
Now, my first issue is that I need to be able to see results real-time as well.
Is there a way one can print to BOTH a screen and output? If one uses the ">>" command, it is essentially sending everything to the file. Running another ping command in parallel is not an option.
View 3 Replies
View Related
Jan 1, 2010
I can ping my router, i can ping google and i can ping the ip address you get in the ubuntu help.If i type 192.168.1.1 i can get my router control panel/i just cant connect to the web,
View 1 Replies
View Related
Mar 13, 2009
it was not working and ping is not reply me and I add ifconfig lo 127.0.0.1 it is working and getting ping but when reboot it is lost setting how can I set it for always ping working.
PING localhost (127.0.0.1) 56(84) bytes of data.
ping: sendmsg: Operation not permitted
ping: sendmsg: Operation not permitted
ifconfig lo 127.0.0.1 later
[Code]....
now working but IWant reboot later working about same. how can I setting it boot start this .
View 7 Replies
View Related
Sep 10, 2009
My server was working perfectly.
My other uses on on LAN can access Internet but Cant ping the server.
Though they were able to do that earlier.
No software installed. No change in any files.
View 1 Replies
View Related
