I run Ubuntu 10.04 on a PackardBell laptop, with an Orange Livebox 2 providing ADSL. I am connected to the Livebox via WiFi, but I can't connect using the ethernet cable. I think that in making changes to the system some time ago I must have ruined something, but I can't work out what.
View 8 RepliesJust installed Scientific Linux 6. Does anyone know how to get it to connect to wired ethernet network?
View 3 Replies View RelatedI have just installed ubuntu 10.04 using the wubi installer to dual-boot my machine. Under ubuntu, I am not able to connect to the internet or my router. Everything works fine under windows. I have tried to find relevant information in the forums, but nothing seems to work for me. I have tried disabling ipv6, setting a static ip, but no go. ifconfig shows no IP, dhclient results in no DHCP offers and pinging my router's IP results in Network is Unreachable.
View 9 Replies View RelatedI acquired an older hp compaq presario computer version 6310us, and initially installed mint, followed by Ubuntu 9.04. Neither one recognized the onboard ethernet port. I checked the bios, and LAN is enabled. It is also enabled in the drop down menu from the toolbar on the desktop. The cable works fine on other computers, and the light on the ethernet port flashes like it does when the cable is connected. I'm new to linux, so not sure what to do to get the connection working.
View 2 Replies View RelatedAfter upgrading from karmic to lucid yesterday made my RTL 8111 -network card die. It's integrated on Intel D510mo mini-itx board.
dmesg:
Code:
After some googling I found out a lot of forumposts about the same problem from year 2007, but the troubles seem to disappear on the newer versions and seem to be back now? With those posts I managed to get the link up by using ethtool by setting autoneg off and setting speed to be 10mbps and half duplex. Any other speed/duplex combination fails.
One suggestion I found was to install r8168-driver from Realtek instead of the r8169. It didn't help, result was very much the same.
I booted to 9.10 live-cd and there the network worked as intended (100Mbps, I dont have a gigabit switch)
I really wouldn't like to fall back to 9.10, but my file server is not very usable with 10mbps.
Just installed Fedora 14 from the Live CD i686 on my Dell Inspiron 1521. I can't connect to the SpeedTouch 585 on either wireless broadcom card or the wired Ethernet card.
I can connect to it from the same Laptop on the Vista which is on dual boot on the same laptop.
Further confusing is that I ran Fedora 14 and connected to another SpeedTouch today.
Already checked the Channel on the wireless nic and it's on the same one as the SpeedTouch.
laptop: averatec 6200 series
ethernet driver: SiS 900
wirless lan driver: rt2500
I got 10.04 installed and running pretty well.I cant get the wired ethernet to work but the wireless works. i did the the command line
[Code]...
also, dont know if i matters but ive got 8mbps/1.5mbps cable (motorala surfboard cable modem) and a linksys wrt54g wireless router.
I have a HP Mini running Ubuntu Desktop 10.04, and I cannot get a wired connection to work. My network card is "Broadcom Corporation BCM4312 802.11b/g (rev 01)", and I have the restricted drivers for the card installed. Wireless works fine, though.
My /etc/network/interfaces:
I've got Puppy Linux on a USB key, and yesterday, while I was on the internet with it, it hanged. I didn't know what to do, and I rebooted from the button (I now know what to do ). The problem is that, after rebooting, Puppy doesn't recognise the router. I've tried to apply the drivers that are on Puppy, but there aren't any compatible.
My router is a Xavi 7968 and my Network Card is:
NIC Fast Ethernet PCI Familia RTL 8139 from Realtek
(On Realtek's website, there isn't any driver linux-compatible)
Just noticed that auto connection to my wired ethernet is not being established after restarts I'm making. Never recall this in the past. I do get an auto connect when I shutdown and restart. I'm using 10.04 LTS Lucid Lynx.
Also have noticed that nearly every upgrade over the past week or so is calling for restart to complete the upgrade. Can there be any unwanted problems in doing several upgrades over a period of several days before doing the restart? I'd like to think not.
As you can imagine these two issues together are causing some lost time.
I have two laptops (Dell & Lenovo), both have wifi.
I am having one wired Ethernet connection.
I want to share this Internet connection among two system , to access Internet from both the system.
I had tried by creating a wireless network, but was not able to do so.
I have installed Ubuntu 11.04 using Wubi through Windows 7. It seems to be working but it will not connect to my wired internet connection. It tells me there is no wired connection, when there is. I used sysinfo and its not showing any network adapter or controller. I have a board with nvidia nforce go 430, could it be a driver issue. It works fine in windows though. Tried using a wireless adapter and all is working. But why doesn't the wired ethernet connection work.
View 9 Replies View RelatedI have a generic P4 desktop computer with Debian Squeeze. Since instalation my wired ethernet connection will slowely slow down and then quit when surfing the web. Sometimes it seems worse than othertimes. If it fails I usualy can get it to come back back up by going to Network Connections and clicking on "wired connection"and them just closing the window. It will work for a bit but the conection will inevitably quit in a short time again. Interstingly it seems mostly a problem with web browsers as doing upgrades, package instalations, using SMXI and things of this sort do not seem to be a problem. I have tried both Epiphany and the Squeeze default Iceweasel with identical results. Also when using Google Earth a similar situation occurs in about 2 minuits of use. The same computer running Debian Lenny with Epiphany and WXP with the dreaded IE do not have this problem.
View 5 Replies View RelatedI have a Zotac Ionitx A-U. I can't get it to establish an internet connection with the wired ethernet within Ubuntu. The chip is detected, but trying to bring up the connection stalls out at trying to obtain a DHCP lease, like this:
DHCP DISCOVER ...
DHCP DISCOVER ...
No DHCPOFFERS received
Specs:
Ionitx A-U
Ubuntu 10.04 x64 kernel 2.6.32-22 (also didn't work in 9.10)
[Code]...
I recently did some troubleshooting on a USB wireless dongle hooked up to my Mint distro. I need the USB wireless to access a home DSL wireless modem out to the Internet. The wireless DSL is on 192.168.0.1
I also have a 10/100 ethernet NIC in the computer, for non-wireless connections. The wired ethernet is all 192.168.1.1. I noticed in /var/log/syslog that there are numerous "DHCPDISCOVER on eth0 to 255.255.255.255 port 67" messages.
Since eth0 has a hard-coded IP, I dunno why DHCP is trying deal with it. Can I turn off DHCP activity against eth0? How to do that?
I'm running an up-to-date Fedora 12 machine with the Gnome desktop (meaning with Network Manager). My network connection is a wired ethernet to a switch which then connects to a Netgear router. For some reason, this machine can't renew its leases with DHCP, so NetworkManager deactivates eth0, taking my machine off the network. I have to click Network Manager and enable eth0, which seems to work every time.
How can I fix it? Here are the relevant bits from /var/log/messages showing a failed DHCP request and then the successful renewal.
Code:
Aug 1 04:00:08 ironton dhclient[12452]: DHCPREQUEST on eth0 to 192.168.1.1 port 67
Aug 1 04:00:08 ironton dhclient[12452]: DHCPNAK from 192.168.1.1
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): DHCPv4 state changed reboot -> expire
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> (eth0): device state change: 8 -> 9 (reason 6)
Aug 1 04:00:08 ironton NetworkManager[1261]: <info> Marking connection 'System eth0' invalid because IP configuration expired.
[Code]...
while my brother was browsing the web on my windows partition he had a blue screen pop up, one of the soft/hardware error ones, not a true BSOD, anyways, ever since my lan port on the computer seems to not be activiating as no wired connection is recognized. The lan port/card is directly attached to the Mother Board, it's a gigabyte motherboard in a self-build computer. I'm just wondering if there's anything I can do to troubleshoot this and see if it is truly a hardware problem or if its something else.
View 9 Replies View RelatedI am unable to connect to wireless network in ubuntu 10.10.i have noticed that the iwlagn driver isnt been used by anything.
View 9 Replies View Relatedin linux world and have recently downloaded and installed ubuntu desktop 10.10i cannot connect to both wired and wireless ethernet on my laptopit tries to connect but fails in 30 seconds , it says"disconnected" while i am able to connect to the same in windows i have broadcom 4315 and i have tried both fwcutter and ndiswrapper but the problem persiststhe device id is 14e4:4315
View 9 Replies View RelatedI have recently installed ubuntu 11.04 on my asus eeepc1005hab. And I've had problems with the wifi. I can connect via ethernet, but the wireless won't connect. I can see the connection, but my wifi never connects. I've tried many things but it still won't work.
View 9 Replies View RelatedI have been looking around the forums searching for similar problems, it seems not only me had this problem. About a month ago I did a regular update via Upd Manager. The next day - no wired connection.Still managable, since the local library has wireless. Now that won't work either.Just after I upgraded from Jaunty, I accidentally removed NetwMngr from the top right corner of the screen, but that should not have anything to do with how the program works, right? I now cannot reach NM, if I run it from the terminal, nothing happens visibly.
View 5 Replies View RelatedI can connect to the internet with wired connection. The switch for the device is on but this command "sudo lshw -C network" has the following results:
#
[sudo] password for nn:
*-network
description: Network controller
product: BCM4312 802.11a/b/g
[Code]....
I've been struggling with this a bit now, and I'm not sure what the problem is. I have a laptop with a BCM4401 Ethernet card as well as a BCM4311 Wireless card. The wireless card works great out of the box, I'm able to connect with it perfectly. The problem is the ethernet card. Here is the situation: The NetworkManager menu doesn't list "Wired Networks" at all (ie. it doesn't say "not managed", it just only lists Wireless networks) Going into Network Connections, there is an "Auto eth0" entry ifconfig shows eth0 (which I assume means NetworkManager isn't managing eth0) I have edited /etc/NetworkManager/nm-system-settings.conf to say managed=true I have edited /etc/network/interfaces to remove any mention of eth0 (all that's left is the "lo" lines) So I'm not sure why eth0 is still showing up when I run ifconfig, and why Network Manager is not managing it. Any ideas?
Edit: Not sure what I did but now ifconfig spits out this:
Code:
eth0 Link encap:Ethernet HWaddr 00:1c:26:2c:60:75
inet addr:10.0.1.12 Bcast:10.0.1.255 Mask:255.255.255.0
inet6 addr: fe80::21c:26ff:fe2c:6075/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[Code]...
The MAC address of the "Auto eth0" entry is 00:1C:23:8F:D4:39, the same as the eth1 entry that ifconfig spits out.
I just did a fresh install of ubuntu studio 10.04 and I can not connect to either a wired or wireless network. The In Network Tools the IPv4 IP address is 127.0.0.1. It is plugged into a network giving out DHCP IP's. Both wired and wireless were working on ubuntu 9. I have tried to bring eth0 up in the terminal but it did not give an error or anything. It it running on a Dell Latitude D820 laptop.
View 3 Replies View RelatedThe situation is I have one machine just installed 10.04yesterday, and I plan to take it as FTP server sharing filesvia LAN and WAN as wellBut after setting up all network withNetwork-Manager found that my dsl connection willdisconnect while my wired connection was connected.
my network-manager setting process is:
1.wired tab:
IPv4:192.168.1.x
[code]....
I wanted to try Ubuntu again but have gone wayback to an old 8.10 disk because I couldn't get 10.10 to work. The install with 8.10 went fine but the internet will not connect. The network manager shows eth0 grayed out and when going in to manage the connection it says 'never'. I'm using Vista with a broadband modem connected to a netgear router.
View 3 Replies View RelatedI am a Ubuntu novice who recently shifted completely to Ubuntu 10.04 from Windows 7 on my Dell Inspiron Mini.
1. I am able to connect to the internet ('Wired') at home but when i plug in the internet cable at work it is not connecting. It gives me the message 'Unplugged, you are now disconnected'.
2. I tried installing the Wicd network manager. Even though there are wireless networks in range it doesnt show me the wireless networks (like it used to show in wiindows).
I have read through a long list of commands in the forums of commands to be executed and executed them all but couldnt connect. Is there anything basic that I am overlooking?
I thought that wired network should work once I plug in a network cable irrespective of the place. How come I am unable to connect to the network at work? I used to have a windows 7 partition and the net connected plug and play when i was in the windows side. I dont want to install Windows just for the internet at work again.
i can't connect to the wired connection, but i can connect to the wireless... i'm using Ubuntus 10.04. when i run this codes into the terminal it shows:
root@valdivia-laptop:/home/valdivia# sudo lshw -C network
*-network
description: Wireless interface
product: AR9285 Wireless Network Adapter (PCI-Express)
vendor: Atheros Communications Inc.
physical id: 0
bus info: pci@0000:04:00.0
logical name: wlan0
[Code].....
I have recently developed a problem with my computer connecting to the internet which has totally stumped me and is currently forcing my to use windows much to my frustration. I am using ubuntu 10.04 on a Toshiba Satellite laptop. My wireless and wired network connections will not connect. They are all present in the menu and i can click on them but the connection tries to connect and then just times out and fails to connect. Everything still works fine in windows Vista. The more confusing thing is i tried some live disks to see if they would work but they all did exactly the same thing including a live disk of ubuntu 9.10 which used to work perfectly and live disks of openSUSE 11.4 and Mint 10. I struggling to tell if this could be a hardware problem or not. The fact that the live disks wouldn't work suggests a hardware problem but the fact that Vista still works totally throws that argument. I have looked all over these forums and elsewhere and have found some similar ish problems but non seem to have the severity of this one as all of those seem to be wireless only problems. The only thing that i was doing at the time this started was i had just set up a new secondary user account but i suspect that may be coincidental.
View 4 Replies View RelatedCan't connect to FIOS when wired
New to Linux/Ubuntu, I have searched and tried a number of suggested solutions posted here and on other Ubuntu forums. My son received a computer with Xubuntu 9.04 already installed. We first tried a wireless adapter for internet connection, but got no results so I have run a cable directly to the Verizon Router 9100EM, but it connected to [URL] and then disconnected. As I said, I tried a few things and now cannot get even an initial connection.
using ifconfig, this is the result:
eth0 Link encap:Ethernet HWaddr 00:50:ba:d7:6d:70
inet6 addr : fe80::250:baff:fed7:6d70/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
Rx packets:32 errors:71 dropped:0 overruns:0 frame:0
[Code]....