Networking :: Interaction Between Host And Guest OS
Aug 28, 2010
I have installed Red Hat Eterprise Linux as a Guest OS using VirtualBox on the Host OS Windows XP SP 2 on my PC. I want to access my local / intranet web site from this Guest OS which is running on the top of on Windows XP, the Host OS. I am not sure as to what IP Settings I need to do. Though I am able to access Internet from both the OSes. The IP of this Guest OS is:
Code:
[root@localhost ~]# ifconfig eth0
eth0
Link encap:Ethernet HWaddr 08:00:27:30:E9:72
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe30:e972/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1871 errors:0 dropped:0 overruns:0 frame:0
TX packets:1926 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1427538 (1.3 MiB) TX bytes:415769 (406.0 KiB)
Interrupt:11 Base address:0xd020
[root@localhost ~]#
I have installed Microsoft Self Loop Adapter (Autoconfiguration IP Address: 169.254.25.129) on the Host OS Windows XP. There is another adapter: VirtualBox Host-Only Network whose IP Address is: 192.168.56.1. So, how can we access intranet web site from the Host OS to Guest OS and vice versa. I also want to access this virtual Red Hat machine /console from within windows XP using PUTTY application. From Windows XP the Red Hat machine is pinging. But when I use the IP to access the machine through PUTTY it doesn't work.
View 17 Replies
ADVERTISEMENT
Feb 2, 2009
My Windows guests see my VMware Host Only folders as \.hostShared Folders. But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder. How to look for the shares with Linux?
View 3 Replies
View Related
Feb 3, 2009
My Windows guests see my VMware Host Only folders as \.hostShared Folders But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder.
View 3 Replies
View Related
Sep 14, 2010
I have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?
View 1 Replies
View Related
Mar 5, 2009
I have rhel5 as host and guest is xp and rhel5, how will I make a network between them.
View 3 Replies
View Related
Jul 16, 2010
how to connect OS "ubuntu 9:10" as the host, with Qemu as a guest.?I can not connect from the host to geust, how to connect??I use Samba to connect the host to the guest.I was able to ping from guest to host, but from host to guest can not ping .. why?
View 1 Replies
View Related
Jul 28, 2009
I am running VMware workstation on a Linux host and WinXP guest using NAT. I have shared a folder on WinXP, and I am able to mount it on the linux host with:
mount -t smbfs -o username=Administrator,password=mypasswd //192.168.100.129/Shared /mnt/tmp
This works fine. However, I want to mount the same folder from a different linux machine (not the host).
I added port forwarding in /etc/vmware/vmnet8/nat/nat.conf:
[incomingtcp]
#445 = 192.168.100.129:445
If I run:
mount -t smbfs -o username=Administrator,password=mypasswd //external_ip_number/Shared /mnt/tmp
I am getting:
mount error 112 = Host is down
Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
It doesn't work even if I try the above command from the linux host itself. It only works if I use the internal IP number. I suspect vmware is not forwarding port 445 but I am not sure how to verify it. I am not running smbd on the linux host, in case that make any difference. I didn't think that was required because the server is really on the WinXP and the linux is just a client.
View 3 Replies
View Related
Jan 9, 2009
I'm looking for a SIMPLE solution for printer sharing. I have an HP printer attached to my Linux host (prints fine from there). I want my XP box to be able to use this printer as well. I can ping my XP box from my Linux box (and vice versa), and the XP box has the HP print driver installed.When I go into my XP box and try to add a printer, I click "A network printer or a printer attached to another computer", then "Connetc to a printer on the Internet or on a home office network" and enter my printer.I'm using the printer name as show in CUPS. I also tried it without port 631. Either way, I get an error message saying "Windows cannot connect to the printer. Either the printer name was typed incorrectly or the specified printer has lost its connection to the server.
View 5 Replies
View Related
Jan 28, 2010
I'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
[Code]....
View 7 Replies
View Related
Oct 13, 2010
I've set up ubuntu server 10.04 x64 with kvm and bridged networking and installed win server 2008 as a guest os. The guest os has full access to the network including lan/wan but the host os can only reach my lan and not the wan. This is true even when the guest machine is powered off?I have to admit that my knowledge of networking, particularly with respect to linux is very flakey but surely if the guest has internet access this should also apply to the host? My only suggestion is an issue with mac addresses but i don't know where to start. Has anybody ran into this problem before?
View 3 Replies
View Related
May 18, 2011
Recently I've been unable to load web pages, hosted on my Ubuntu Guest in Apache, from my OSX Host. In fact, I can no longer even ping the Guest OS from the Host. In the past, when I did ifconfig on the Guest, I got an IP of 10.0.1.n. Now I'm getting 10.0.2.15--the default NAT Address. The thing is, I didn't change any settings recently. What I did do is run software update for OSX, Ubuntu, and updated VirtBox.
Current Versions:
VirtBox 4.0.8 r71778
Host: OSX 10.6.7
Guest: Ubuntu 11.04
why I can no longer access my Guest OS from my Host? I spent hours on this last night, to no avail. What would cause the Guest IP to change from 10.0.1.n to 10.0.2.15? As I say, I manually made no config changes.
View 1 Replies
View Related
Jun 6, 2011
Debian Testing host, Winduhs XP guest. Winduhs is not allowed to directly access The Internets, and I am not setting up bridging as that makes it possible for the guest to mount layer 2 attacks on the LAN. I need for the guest to tunnel through the host without being able to see anything on the host, so it can then get access to The Internets, while being protected by iptables (Shorewall).
Used to be with VMware I had host-only set and the guest in a different class c (192.168.2.1) from the host (192.168.1.1) I turned on ipforwarding, set Shorewall rules, and it all worked. Now I have everything set with VirtualBox, and it does not work. Guest can ping its interface but not host. Host can ping vboxnet0. Host is supposed to masquerade guest's 192.168.2.1 through to the default out at 192.168.1.1, but it's not. I think a clue is in routing, but I don't know what's wrong.
[code]....
View 2 Replies
View Related
Oct 28, 2010
host is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
View 1 Replies
View Related
Oct 6, 2015
im new to virtualbox and i run linux arch as guest os. now my question is how it can be that the vm has the same ip as my host os.
this is suppose to be diffrent machine isnt it? and how to configure my guest vm to be completely unrelated to my host
View 1 Replies
View Related
May 12, 2010
i have installed virtualbox on centos , and installed xp as a guest os. my LAN is on 10.200.2.x/24 network inorder to avoid conflict i have given centos ip as 10.200.2.191/24 and a virtual ip 192.168.56.4/24 my gateway is 10.200.2.1 i am able to ping from my guest os to host os the ip address but not the gateway inorder for internet connectivity
some of the configuration of virtual box
Display
Video Memory:
16 MB
3D Acceleration:
[Code]....
View 5 Replies
View Related
Dec 9, 2009
I don't want to use image file as disk, but would like to allocate a disk for guest os. say it's /sda6, then do I need install guest os on host os? or can I install while the system is booting and only import a guest os from that? Do I have to mount the disk?
View 2 Replies
View Related
Nov 18, 2010
slow interaction between Ubuntu samba and xp.I have a and Ubuntu server with samba and many xp clients, they complain because the time to open a file is to long, even to open a directori to see wich files are on it
View 2 Replies
View Related
Dec 9, 2009
I have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.
Quote:
Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:
Quote:
Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]
[code]....
dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.
View 8 Replies
View Related
Jan 3, 2010
I have tried a few times already the following procedures: start a new installation (each time, I create a new VBox VM) with the Fedora 12 DVD iso attached to the DVD drive of the VM. I select the default setting, like US english, US keyboard, local time (GMT +8), standard installation ... etc). The installation process had been smooth to the screen the system asking for a reboot after installing something like 1100+ packages. Then I click the reboot button offered. The VM restarted but each and every time, it came up with the following error message:
Booting from local disk...
FATAL: INT18: BOOT FAILURE
There was no other error message durint the installation process. It would be very much appreciated if some one can tell me what went wrong and how to solve it. I believe even I try again the same way, it will end up with same result. Is it a software or hardware problem? In case software problem, is it Fedora or VirtualBox?
View 5 Replies
View Related
Jul 5, 2011
I have Linux installed on my harddrive, sometimes I run it as the host operating system and sometimes run it as a guest in Windows using VirtualBox. It's a nice ability, I think.
I don't think it's possible with Windows though. Is it because your average distribution includes drivers for everything known to man? Are devices/drivers configured statically in Windows so when somethings changed it breaks?
View 2 Replies
View Related
May 16, 2010
Is it possible to read the host cpu's temperature from a virtual guest?
(1) Where host = ubuntu desktop and guest = ubuntu server, and
(2) Where host = windows xp and guest = ubuntu server?
Typically I would read the contents of /proc/acpi/thermal_zone/THRM/temperature on host ubuntu desktop. I guess its more tricky when running ubuntu on windows host. What I am trying to do is shutdown guest if host cpu temperature is greater than certain value.
View 2 Replies
View Related
Jun 28, 2010
I am using virtualbox 3.2.4 (virtualbox host only network (NAT)) on Windows XP Host and an ubuntu 10.04 guest. Recently installed vsFTPd on ubuntu guest and I am able to FTP from ubuntu to localhost. But when I try from the windows host I got an unknown connect error. I try with anonymous users enabled too.
View 2 Replies
View Related
Sep 9, 2010
Quote:
I'm working in php / mssql project and I'm working on php side. I try VirtualBox to access to mssql from linux. I'm using VirtualBox 3.2.8(Downloaded from VirtualBox website) Hosted On Ubuntu 10.04, and my Guest OS is Windows 7. I followed some tutorials on how to connect from host to guest, but all failed... how to connect from ubuntu (host) to windows 7 (guest)
View 2 Replies
View Related
Sep 12, 2010
i am running Ubuntu on my VMWare Workstation. i cant get it work the built in file sharing that comes with VMWare Workstation(by instaling the VMWare tools). but i want to share files between my XP(host) and Ubuntu. i googled this but came up with no good results.
View 1 Replies
View Related
Dec 7, 2010
I'm running Ubuntu 10.10 desktop in a VirtualBox VM on a Windows 2008 host machine. The end goal is join the the Ubuntu VM to a Windows 2008 domain. I've downloaded likewilikewise-open_5.4.0.42111-2ubuntu1.2_i386.deb se-open_5.4.0.42111-2ubuntu1.2_i386.deb to get the joining of the VM to the domain. But from this point forward, I'm completely lost.
1) How do I implement this likewise package?
2) How do I get files from my Windows 2008 host to the Ubuntu guest VM?
The likewise file is burned to a DVD. When I try to read the DVD, I get the "My Disk" icon but only one file gets displayed. In other words, the DVD the likewise file is burned to has a ton of files. Ubuntu doesn't see any of them expect one .exe file. The /etc/fstab had no entry for cdrom, so I put a line in that says
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 rebooted and that didn't do squat. There is no entry /etc/cdrom but there is directory /etc/My Disc. And I suppose that's what gets mounted because I can see one file on that disc. So then I thought, to hell with the DVD drive and I'll just get the Linux guest to see a "shared drive" on the host. I shared out a folder on the host via the Virtualbox "shared folders". But how I get the Ubuntu guest to see this shared folder is as big a mystery to me as is the creation of life.
View 1 Replies
View Related
Apr 14, 2010
i just want to run linux(guest) on winxp(Host)on vmware. where i download linux guest. and how i installed the same in vmware runing on winxp.
View 3 Replies
View Related
Mar 22, 2011
I have a host with 4 VMs on it. How do I move them to another host? The first host is dying and I want to move the VMs to another host. I tried to copy the files under /vms from one host to another and then copy the files under /etc/libvirt/qemu to the other host. I then ran "virsh" and it does not see them.
View 1 Replies
View Related
Jan 26, 2010
pretty comfortable at the command line and in kde. found 2 'supplementary kernel drivers' for virtualbox at slackbuild (thank you heinz!). followed the how-to at slackbuild and built and installed both packages, but additions weren't working. (i thought they were standalone) noticed the 'supplemental' in their description, and so installed the guest additions for linux from vbox site. additions still not working. at this point i start restarting my slackware vm, and redoing everything in various sequences. finally, additions work! but i'm not sure why! critical pieces and sequence for getting guest additions working once i have slackware installed?
View 1 Replies
View Related
Mar 16, 2009
I have a local file server running Samba on Fedora 9. It's already configured and serves a few people without any problems. I am now trying to set up a new read-only share with the username 'guest' and the password 'guest'. However, with no success so far! If I log on as 'guest' with the password 'guest' like so:
Code:
su - guest
No problem. Once logged in, if I try:
Code:
smbclient //samba/share
I'm prompted for a password. If I enter 'guest' I get:
Code:
session setup failed: NT_STATUS_LOGON_FAILURE
If I enter nothing (null) I get:
Code:
Anonymous login successful
Domain=[RIVER] OS=[Unix] Server=[Samba 3.2.8-0.26.fc9]
tree connect failed: NT_STATUS_LOGON_FAILURE
View 8 Replies
View Related
Dec 27, 2010
I have several linux laptops and a desktop-server running Ubuntu Lucid. I also have Android(tm) and iPhone(tm) devices. All of these connect to my at-home LAN using wireless or wired ethernet through my home-LAN router+gateway and on through the cable modem. In addition, printers are network capable and deployed on the same at-home LAN. All of that works.
Now I want these various and several computers to share files and services (web, print, media) with each other and interact with each other on this same at-home LAN. Can someone point me to a HOWTO or similar application notes that discuss what I need to do? Since all of the at-home LAN devices use DHCP and get dynamic IP addresses, any /etc/hosts files that I create stop working when leases renew. I can configure "fixed IP address" settings, but then wifi roaming is a royal pain in the anatomy -- at least the ways I know how to do this.
I can use the router+gateway to give a specific IP address to each hardware (MAC) address, but then when folks visit it is irksome to setup so that we might give or get the odd file or they might print the odd document. I vaguely remember that there was a way to generate dynamic "local network" host names or similar attached to dynamic "local network" IP addresses all under the control of DHCP-server and supporting utilities. I'm dashed if I can find anything about that other than really antique details. Once folks stop laughing at what I'm certain is a totally noob question, I hope that there is a solid HOWTO that just works out there and that some kind soul will tell me where to find it. I apologize in advance if this question has been asked and answered in the past. One must know enough to know what to search for and get meaningful results. ~~~0;-/
View 6 Replies
View Related
