I have Linux installed on my harddrive, sometimes I run it as the host operating system and sometimes run it as a guest in Windows using VirtualBox. It's a nice ability, I think.
I don't think it's possible with Windows though. Is it because your average distribution includes drivers for everything known to man? Are devices/drivers configured statically in Windows so when somethings changed it breaks?
I have a Ubuntu hosting a Windows XP box (using VirtualBox). The Windows XP box is connected to work using Check Point VPN-1. Essentially this enables me to go to my Windows box and do something like ping comp-at-work and it just works.
I would like to access the VPN resources from the Linux host though. The Windows guest is only there because the VPN client isn't working in Linux. If I could somehow ssh from the Linux host right into my computer at work (using remote desktop would also be great), that would save me a lot of round trips between my Linux host and the Windows guest.
I have RHEL running in Virtual Box and my native OS is Win 7. From a purely educational standpoint, I want to be able to access RHEL from Win 7 over SSH. I download putty but don;t know how to make it do what I want. Ideally, I would like to use the linux command prompt at a minimum and preferably access the GUI apps also. IS this possible? I am just trying to explore and expand my linux knowledge.
View 7 Replies View RelatedI am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.
Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup:
Del inspiron 1525:
RAM 3G
HDD 160G
Linux RHEL3 on VMWare
I'm looking for virtual machine software that supports dual monitors on a Linux guest with a Windows 7 host.VirtualBox supports dual monitors only for Windows guests. VMware Player was extremely slow, so I gave up. I'm not sure it supports dual monitors, anyway. Can anyone recommend a product for what I want to do?
View 1 Replies View RelatedI would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
I have RHEL 5 installed on VMware 6.0 and the host OS is Windows 7. My Host is connected to internet using a wireless connection and works on shared IP. Earlier when I had Windows vista as host I have managed to get the internet connection on the RHEL but do not remember how I managed it. Now I need help in setting the internet connection on RHEL. I have set up a NAT connection. But of no use.
View 4 Replies View RelatedI am using virtualbox 3.2.4 (virtualbox host only network (NAT)) on Windows XP Host and an ubuntu 10.04 guest. Recently installed vsFTPd on ubuntu guest and I am able to FTP from ubuntu to localhost. But when I try from the windows host I got an unknown connect error. I try with anonymous users enabled too.
View 2 Replies View RelatedI'm running Ubuntu 10.10 desktop in a VirtualBox VM on a Windows 2008 host machine. The end goal is join the the Ubuntu VM to a Windows 2008 domain. I've downloaded likewilikewise-open_5.4.0.42111-2ubuntu1.2_i386.deb se-open_5.4.0.42111-2ubuntu1.2_i386.deb to get the joining of the VM to the domain. But from this point forward, I'm completely lost.
1) How do I implement this likewise package?
2) How do I get files from my Windows 2008 host to the Ubuntu guest VM?
The likewise file is burned to a DVD. When I try to read the DVD, I get the "My Disk" icon but only one file gets displayed. In other words, the DVD the likewise file is burned to has a ton of files. Ubuntu doesn't see any of them expect one .exe file. The /etc/fstab had no entry for cdrom, so I put a line in that says
/dev/hdc /media/cdrom0 udf,iso9660 user,noauto 0 0 rebooted and that didn't do squat. There is no entry /etc/cdrom but there is directory /etc/My Disc. And I suppose that's what gets mounted because I can see one file on that disc. So then I thought, to hell with the DVD drive and I'll just get the Linux guest to see a "shared drive" on the host. I shared out a folder on the host via the Virtualbox "shared folders". But how I get the Ubuntu guest to see this shared folder is as big a mystery to me as is the creation of life.
I am trying to connect an ipad to a windows xp virtual machine running in a linux (opensuse) host machine. VMWare reports that usbmuxd running on the host machine (opensuse) must first release the usb port so that vmware can open it in the guest (XP) vm. VMWare knows that I have physically connected an ipad and when I click "Connect" reports the error and then displays the port as "Connected" although according to ITunes diagnostics there is no such connection. I have the same problem connecting a usb flash drive to the guest vm. Is there a way I can manually disconnect the port from the opensuse host?
View 2 Replies View RelatedI am using virtual box with Guest OS Linux Mint on Host OS Windows Vista.I want to log in as 'root'.I typed 'su' at the terminal, then it asked for a Password
View 3 Replies View Relatedhost is windows 2003 server 64-bit
guest is ubuntu 9.04 server 64bit
Qemu : 0.11.1
Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI
Vlan Number =0
VLAN Type: Tap Networking
Mac address: tap0's mac address from host
TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
I have tried a few times already the following procedures: start a new installation (each time, I create a new VBox VM) with the Fedora 12 DVD iso attached to the DVD drive of the VM. I select the default setting, like US english, US keyboard, local time (GMT +8), standard installation ... etc). The installation process had been smooth to the screen the system asking for a reboot after installing something like 1100+ packages. Then I click the reboot button offered. The VM restarted but each and every time, it came up with the following error message:
Booting from local disk...
FATAL: INT18: BOOT FAILURE
There was no other error message durint the installation process. It would be very much appreciated if some one can tell me what went wrong and how to solve it. I believe even I try again the same way, it will end up with same result. Is it a software or hardware problem? In case software problem, is it Fedora or VirtualBox?
i have installed virtualbox on centos , and installed xp as a guest os. my LAN is on 10.200.2.x/24 network inorder to avoid conflict i have given centos ip as 10.200.2.191/24 and a virtual ip 192.168.56.4/24 my gateway is 10.200.2.1 i am able to ping from my guest os to host os the ip address but not the gateway inorder for internet connectivity
some of the configuration of virtual box
Display
Video Memory:
16 MB
3D Acceleration:
[Code]....
i just want to run linux(guest) on winxp(Host)on vmware. where i download linux guest. and how i installed the same in vmware runing on winxp.
View 3 Replies View RelatedSetup:
1. Microsoft Windows 7 64-bit Professional HOST Operating System
2. Oracle VirtualBox 4.0.6r71416 on top of Windows 7
3. Ubuntu 10.04 Lucid Lynx 32-bit GUEST Operating System in VirtualBox
I successfully installed the above configuration on May 15, 2011. I had some difficulty getting the Host-Only VirtualBox Adapter to work. I was forced to make a subtle change to the Windows Registry in order to get the Adapter to work correctly. I was successful. I used the Debian Update Manager to update my installation of Ubuntu. Nothing changed on the Windows 7 side. Now, Windows 7 says that the Host-only adapter is enabled, but I don't have a connection to the Ubuntu OS. I can't use PuTTY or WinSCP. When I invoke ipconfig on the Windows side, 192.168.56.101 is the IPv4 address. When I invoke ifconfig on the Ubuntu side, there isn't anything.
I have windows vista 32bit oem that originally came with DELL system when I bought new. On the PC, MS$ sticker has the product key for windows vista.When I reformatted the disk and re-install windows vista natively on the machine for which it was licensed, it got automatically activated and passed MS$ genuine check. But I got into problems when using windows vista as guest os from fedora 13 host os using virtualbox on exactly same machine for which vista is licensed for. I go that MS$ : x -days to automatic activation, activate now link. Clicking on activate now it says invalid product key even I entered correct product key as it is on the PC.
I tried to create new windwos vista guest os 2 ways:
1) using existing native installation of windows vista by using vmware converter to create vmware disk image of the running windows vista and shutting down and log back into fedora 13 used this disk image as the storage in virtualbox and create windows vista guest. It starts up ok except for that activation issue.
2) using the windows vista dvd and using that as the source for new windows vista installation in virtualbox. All fine except got that activation issue.After killing my 2 days just for this I dont know whats next. Does that not make sense that I have a license for using windows vista on this specific pc, I am entitled to install it on that same pc as virtual or native or even both ways ?
This link: http://www.zdnet.com/blog/bott/vista-vi icture/360 says starting with service pack 1 MS$ now allows virtual installation of windows oem. My native installation was updated to service pack 2 and I also updated the fresh dvd install of windows vista in virtualbox to service pack 1 and then service pack 2 but still no effect in regard to license activation.Did any one solved the problem in some way regarding this issue for windows vista, I would like to know.
With VirtualBox you can share a directory on the host machine with the guest machine. Can you share a directory on the guest machine with the host machine? In my setup the host is Windows 7 and the guest is Ubuntu. Can I have a directory on the Ubuntu file system accesible from Windows?
View 1 Replies View RelatedMy RHEL version is Red Hat Enterprise Linux AS release 4(Nanhant update 6) I installed Linux on vmware.My host is win xp.Am able to ping guest as well host.How i can copy the files from host to guest.
View 2 Replies View RelatedHow can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies View RelatedCould you provide me steps on how to connect the guest OS (RHEL 4) using Vmware thru host OS( Win 7)
I am using Bridged connection. How to choose the static IP to be added in the Host OS.
Centos 5 was set up for me on my server with VMware and XP SP3 as a guest. I have little to no knowledge of centos (or anything Linux) so i tend to leave well alone but i am trying to get a USB printer to work from my networked pcs through XP - Through VMware - Through Centos5 to the USB port on the back of my server. I am reasonably OK with XP but am not a techie so will probably need to be walked through this.
I can see the printer appearing on Centos' equivalent to device manager and when i print everything seems ok with the XP print queue clearing after a few seconds but nothing prints. At a guess i need some sort of software bridge- (is this SAMBA?).
what is the best working software which could backup dual system.Host system is XP pro...and Backtrack on the second one.Is Acronis(xp based) will works?
View 4 Replies View RelatedI have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
im new to virtualbox and i run linux arch as guest os. now my question is how it can be that the vm has the same ip as my host os.
this is suppose to be diffrent machine isnt it? and how to configure my guest vm to be completely unrelated to my host
My Windows guests see my VMware Host Only folders as \.hostShared Folders. But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder. How to look for the shares with Linux?
View 3 Replies View RelatedI have installed Red Hat Eterprise Linux as a Guest OS using VirtualBox on the Host OS Windows XP SP 2 on my PC. I want to access my local / intranet web site from this Guest OS which is running on the top of on Windows XP, the Host OS. I am not sure as to what IP Settings I need to do. Though I am able to access Internet from both the OSes. The IP of this Guest OS is:
Code:
[root@localhost ~]# ifconfig eth0
eth0
Link encap:Ethernet HWaddr 08:00:27:30:E9:72
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe30:e972/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1871 errors:0 dropped:0 overruns:0 frame:0
TX packets:1926 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1427538 (1.3 MiB) TX bytes:415769 (406.0 KiB)
Interrupt:11 Base address:0xd020
[root@localhost ~]#
I have installed Microsoft Self Loop Adapter (Autoconfiguration IP Address: 169.254.25.129) on the Host OS Windows XP. There is another adapter: VirtualBox Host-Only Network whose IP Address is: 192.168.56.1. So, how can we access intranet web site from the Host OS to Guest OS and vice versa. I also want to access this virtual Red Hat machine /console from within windows XP using PUTTY application. From Windows XP the Red Hat machine is pinging. But when I use the IP to access the machine through PUTTY it doesn't work.
I don't want to use image file as disk, but would like to allocate a disk for guest os. say it's /sda6, then do I need install guest os on host os? or can I install while the system is booting and only import a guest os from that? Do I have to mount the disk?
View 2 Replies View RelatedMy Windows guests see my VMware Host Only folders as \.hostShared Folders But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder.
View 3 Replies View RelatedI have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.
Quote:
Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:
Quote:
Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]
[code]....
dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.
