I have VMWare on a notebook, guest Windows running on Linux host. The network in that virtual machine is configured as NAT. I want to share/transfer files from Linux (host) to Windows (guest). So I leave sshd always running on the notebook, I go into Windows and run an SSH/SFTP program. My Wifi router has address 192.168.1.1, my desktop has address 192.168.1.2 and my notebook has address 192.168.1.3. On the notebook, that SSH/SFTP program connects to 192.168.1.3 (i.e. the notebook itself) and everything works fine. But it's a notebook, and when I leave home with it, 192.168.1.3 is no longer accessible. How can I let the guest OS connect to the host OS when I'm away from my Wifi network?
I am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.
Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup: Del inspiron 1525: RAM 3G HDD 160G Linux RHEL3 on VMWare
I am running VMware workstation on a Linux host and WinXP guest using NAT. I have shared a folder on WinXP, and I am able to mount it on the linux host with: mount -t smbfs -o username=Administrator,password=mypasswd //192.168.100.129/Shared /mnt/tmp This works fine. However, I want to mount the same folder from a different linux machine (not the host).
I added port forwarding in /etc/vmware/vmnet8/nat/nat.conf: [incomingtcp] #445 = 192.168.100.129:445
If I run: mount -t smbfs -o username=Administrator,password=mypasswd //external_ip_number/Shared /mnt/tmp
I am getting: mount error 112 = Host is down Refer to the mount.cifs(8) manual page (e.g.man mount.cifs)
It doesn't work even if I try the above command from the linux host itself. It only works if I use the internal IP number. I suspect vmware is not forwarding port 445 but I am not sure how to verify it. I am not running smbd on the linux host, in case that make any difference. I didn't think that was required because the server is really on the WinXP and the linux is just a client.
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
how to connect OS "ubuntu 9:10" as the host, with Qemu as a guest.?I can not connect from the host to geust, how to connect??I use Samba to connect the host to the guest.I was able to ping from guest to host, but from host to guest can not ping .. why?
My RHEL version is Red Hat Enterprise Linux AS release 4(Nanhant update 6) I installed Linux on vmware.My host is win xp.Am able to ping guest as well host.How i can copy the files from host to guest.
I can no longer drag files from my ubuntu host into my XP guest. I have vmware tools installed in XP and up until recently I could simply drag whatever I wanted back and forth between the systems. When I try to drag a file across into XP the cursor has the plus sign like it would normally to drop a file in, but now it also makes a selection box on the XP desktop. Same problem in Workstation and Player. I haven't posted on the vmware forums yet, I figured someone here probably has had the same problem. I don't think it was a kernel update. I restarted ubuntu with 2.6.31.18 which was fully functional before, still with the same problem.
Not sure if this post belongs here, but here it is.
Host: Win server 2003 Guest: Ubuntu server
Host: IS able to ping guest. Firewall is OFF. NOT able to access guest (which is a web-server) at browser. Guest: NOT able to ping host. Running a web server, you can check the website: (pegajosa.com) is running under that virtual Linux server.
Problem: guest needs to access host's sql database and/or any resources.
Centos 5 was set up for me on my server with VMware and XP SP3 as a guest. I have little to no knowledge of centos (or anything Linux) so i tend to leave well alone but i am trying to get a USB printer to work from my networked pcs through XP - Through VMware - Through Centos5 to the USB port on the back of my server. I am reasonably OK with XP but am not a techie so will probably need to be walked through this.
I can see the printer appearing on Centos' equivalent to device manager and when i print everything seems ok with the XP print queue clearing after a few seconds but nothing prints. At a guess i need some sort of software bridge- (is this SAMBA?).
I have RHEL 5 installed on VMware 6.0 and the host OS is Windows 7. My Host is connected to internet using a wireless connection and works on shared IP. Earlier when I had Windows vista as host I have managed to get the internet connection on the RHEL but do not remember how I managed it. Now I need help in setting the internet connection on RHEL. I have set up a NAT connection. But of no use.
How can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
I'm running Ubuntu 9.1 i386 in test with Vmware 2.0.2. I used Radu Cotescu's patch and instructions to get vmware installed. Everything seems to be running fine in the guest machine (CentOS 5), except I can't ssh from the Ubuntu host to the guest machine.
This guest is a clone of one that is running under on my Ubuntu 8.1 host and networking is fine there. I'm wondering if there were changes to routing or bridging in Ubuntu 9.1 to cause this. I've been digging through google for a while, but haven't seen others reporting any issues. This is definitely particular to Karmic Koala though.
The host's routing table is:
Code:
Destination Gateway Genmask Flags Metric Ref Use Iface 192.168.1.0 * 255.255.255.0 U 2 0 0 wlan0 192.168.0.0 * 255.255.255.0 U 0 0 0 vmnet3
[code]....
My routing table on the Ubuntu 8.1 host differs by the link-local line only, and the guests are exactly the same.I can ssh from the guest into the host, as 192.168.0.2 is the hosts ip on the vm network. The host should be able to ssh to the guest as it does in Ubuntu 8.1.
I am not able to connect to the internet via Ubuntu guest in Vmware Workstation. Here is the ipconfig:
Here is the ifconfig -a:
I have the vmware os settings to connect through a nat connection and I am able to ping domains however I am unable to open a page in either firefox or chrome.
My Windows guests see my VMware Host Only folders as \.hostShared Folders. But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder. How to look for the shares with Linux?
I have installed Red Hat Eterprise Linux as a Guest OS using VirtualBox on the Host OS Windows XP SP 2 on my PC. I want to access my local / intranet web site from this Guest OS which is running on the top of on Windows XP, the Host OS. I am not sure as to what IP Settings I need to do. Though I am able to access Internet from both the OSes. The IP of this Guest OS is:
I have installed Microsoft Self Loop Adapter (Autoconfiguration IP Address: 169.254.25.129) on the Host OS Windows XP. There is another adapter: VirtualBox Host-Only Network whose IP Address is: 192.168.56.1. So, how can we access intranet web site from the Host OS to Guest OS and vice versa. I also want to access this virtual Red Hat machine /console from within windows XP using PUTTY application. From Windows XP the Red Hat machine is pinging. But when I use the IP to access the machine through PUTTY it doesn't work.
My Windows guests see my VMware Host Only folders as \.hostShared Folders But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder.
finding / mapping network shares on Win 7 guest in vmware. I am running 10.10 64 bit ubuntu and installed vmware workstation 7 (64 bit version). I created and installed win 7 (ultimate) vm. everything is good so far. The issue is I have a second desktop with ubuntu and I have shared 4 drives on that desktop. I want those shared available to the win 7 guest. And even after enabling the shared folders I do not see them.
Note: I have a shared folder on the same machine where I have vmware installed and win7 has assess to that drive.. its just that the shares on network are not available. Note2: i had virtualbox installed and it worked fine.
I'm looking for a SIMPLE solution for printer sharing. I have an HP printer attached to my Linux host (prints fine from there). I want my XP box to be able to use this printer as well. I can ping my XP box from my Linux box (and vice versa), and the XP box has the HP print driver installed.When I go into my XP box and try to add a printer, I click "A network printer or a printer attached to another computer", then "Connetc to a printer on the Internet or on a home office network" and enter my printer.I'm using the printer name as show in CUPS. I also tried it without port 631. Either way, I get an error message saying "Windows cannot connect to the printer. Either the printer name was typed incorrectly or the specified printer has lost its connection to the server.
I'm trying to ssh into a virtual installation of ubuntu I have, named "ubuntu-x86" but I can't get it to work for some reason. I have two network cards, both assigned to NAT, on the virtual machine, but one has a static IP address, while the other uses DHCP. For some reason, the command:
I've set up ubuntu server 10.04 x64 with kvm and bridged networking and installed win server 2008 as a guest os. The guest os has full access to the network including lan/wan but the host os can only reach my lan and not the wan. This is true even when the guest machine is powered off?I have to admit that my knowledge of networking, particularly with respect to linux is very flakey but surely if the guest has internet access this should also apply to the host? My only suggestion is an issue with mac addresses but i don't know where to start. Has anybody ran into this problem before?
Recently I've been unable to load web pages, hosted on my Ubuntu Guest in Apache, from my OSX Host. In fact, I can no longer even ping the Guest OS from the Host. In the past, when I did ifconfig on the Guest, I got an IP of 10.0.1.n. Now I'm getting 10.0.2.15--the default NAT Address. The thing is, I didn't change any settings recently. What I did do is run software update for OSX, Ubuntu, and updated VirtBox.
why I can no longer access my Guest OS from my Host? I spent hours on this last night, to no avail. What would cause the Guest IP to change from 10.0.1.n to 10.0.2.15? As I say, I manually made no config changes.
Debian Testing host, Winduhs XP guest. Winduhs is not allowed to directly access The Internets, and I am not setting up bridging as that makes it possible for the guest to mount layer 2 attacks on the LAN. I need for the guest to tunnel through the host without being able to see anything on the host, so it can then get access to The Internets, while being protected by iptables (Shorewall).
Used to be with VMware I had host-only set and the guest in a different class c (192.168.2.1) from the host (192.168.1.1) I turned on ipforwarding, set Shorewall rules, and it all worked. Now I have everything set with VirtualBox, and it does not work. Guest can ping its interface but not host. Host can ping vboxnet0. Host is supposed to masquerade guest's 192.168.2.1 through to the default out at 192.168.1.1, but it's not. I think a clue is in routing, but I don't know what's wrong.
The case: I'm running two dedicated Linux servers (openSUSE). Both servers are connected through public IP addresses to the internet. Each server hosts a VMware with another Linux inside.
SRV1 and SRV2 are the entry points for OpenVPN from external clients. SRV1 and SRV2 are although connected through an OpenVPN connection for save data sharing.
My problems: SRV3 can't connect to SRV2 and SRV4. SRV4 can't connect to SRV1 and SRV3. External OpenVPN clients connected to SRV1 can't reach SRV2 and SRV4. External OpenVPN clients connected to SRV2 can't reach SRV1 and SRV3.
host is windows 2003 server 64-bit guest is ubuntu 9.04 server 64bit Qemu : 0.11.1 Qemu manager: 7.0
from Qemu manager, if network card is using User Networking, it's a NAT and I can see that Guest Ubuntu has an ip address 10.0.2.15 and is able to access the internet. However, as Guest ubuntu is running server so I want to do use Tap networking and I assue with Tap, the Guest ubuntu will get an ip address which is in the same subnet as host machine by dhcp. so from Qemu Manager 7.0, I changed Network card to be:
NE2000PCI Vlan Number =0 VLAN Type: Tap Networking Mac address: tap0's mac address from host TAP Network Adpator: Tap0
Note that tap0 was created by openvpn. and then fired Ubuntu guest, ifconfig shows no ip address on eth0 (which has the same mac address as Tap0) so the guest Ubuntu has no ip address and can't access public.
I had put my computer on standby and when i restarted it, it powered off within a few seconds. I turned it back on and after that i've lost connectivity to internet on Ubuntu 10.04.
However I have VMware (XP) installed and internet/network works on that. I'm a newbie with Linux.
Here are some outputs:
I have tried to edit the connection using System>Preferences>Network Connections. I entered manual settings for IPV4, but whatever i enter there, it doesnt get reflected when i type ifconfig in the terminal window. I tried setting it to Automatic DHCP as well. Doesnt work.
I have Fedora 12 (Fedora-12-i686-Live.iso) installed and booting in a VMWare workstation (version 6.5.3). I am able to login as the LiveUser.
I need information on how to access the drives on my host which is WindowsXP. My C: on the host is shared, and my network adapter for the VM is "NAT".
The only directory listed in my /mnt directory is "live".
My Fedora enviornment is "bare bones". There is nothing installed except for the original files from the "iso" loading procedure.
I also have been unable to get the VMWare tools installed, and I don't know if this is related. I don't mind bypassing this if this isn't required. My only desire right now is to access my C: