General :: Ping From Guest Os To Host Os?
May 12, 2010
i have installed virtualbox on centos , and installed xp as a guest os. my LAN is on 10.200.2.x/24 network inorder to avoid conflict i have given centos ip as 10.200.2.191/24 and a virtual ip 192.168.56.4/24 my gateway is 10.200.2.1 i am able to ping from my guest os to host os the ip address but not the gateway inorder for internet connectivity
some of the configuration of virtual box
Display
Video Memory:
16 MB
3D Acceleration:
[Code]....
View 5 Replies
ADVERTISEMENT
Dec 9, 2009
I have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.
Quote:
Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:
Quote:
Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]
[code]....
dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.
View 8 Replies
View Related
Apr 25, 2010
Not sure if this post belongs here, but here it is.
Host: Win server 2003
Guest: Ubuntu server
Host: IS able to ping guest. Firewall is OFF. NOT able to access guest (which is a web-server) at browser.
Guest: NOT able to ping host. Running a web server, you can check the website: (pegajosa.com) is running under that virtual Linux server.
Problem: guest needs to access host's sql database and/or any resources.
Network: is bridged.
At the Linux box ifconfig -a code...
View 7 Replies
View Related
May 13, 2011
Even ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
View 10 Replies
View Related
Jan 19, 2010
Host - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
View 2 Replies
View Related
Jul 9, 2010
Ive got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
View 1 Replies
View Related
Jul 5, 2011
I have Linux installed on my harddrive, sometimes I run it as the host operating system and sometimes run it as a guest in Windows using VirtualBox. It's a nice ability, I think.
I don't think it's possible with Windows though. Is it because your average distribution includes drivers for everything known to man? Are devices/drivers configured statically in Windows so when somethings changed it breaks?
View 2 Replies
View Related
Apr 14, 2010
i just want to run linux(guest) on winxp(Host)on vmware. where i download linux guest. and how i installed the same in vmware runing on winxp.
View 3 Replies
View Related
Jun 5, 2010
With VirtualBox you can share a directory on the host machine with the guest machine. Can you share a directory on the guest machine with the host machine? In my setup the host is Windows 7 and the guest is Ubuntu. Can I have a directory on the Ubuntu file system accesible from Windows?
View 1 Replies
View Related
Nov 4, 2010
I have a Ubuntu hosting a Windows XP box (using VirtualBox). The Windows XP box is connected to work using Check Point VPN-1. Essentially this enables me to go to my Windows box and do something like ping comp-at-work and it just works.
I would like to access the VPN resources from the Linux host though. The Windows guest is only there because the VPN client isn't working in Linux. If I could somehow ssh from the Linux host right into my computer at work (using remote desktop would also be great), that would save me a lot of round trips between my Linux host and the Windows guest.
View 2 Replies
View Related
Nov 11, 2010
I have RHEL running in Virtual Box and my native OS is Win 7. From a purely educational standpoint, I want to be able to access RHEL from Win 7 over SSH. I download putty but don;t know how to make it do what I want. Ideally, I would like to use the linux command prompt at a minimum and preferably access the GUI apps also. IS this possible? I am just trying to explore and expand my linux knowledge.
View 7 Replies
View Related
Jul 28, 2010
My RHEL version is Red Hat Enterprise Linux AS release 4(Nanhant update 6) I installed Linux on vmware.My host is win xp.Am able to ping guest as well host.How i can copy the files from host to guest.
View 2 Replies
View Related
Dec 29, 2009
I am new to linux, it was nice to work with linux on virtual machine, but suddenly yesterday when I try to connect using putty from my windowsxp machine its showing network connection error. I dont know what happened. In linux machine ifconfig shows only 127.0.0.1, could not trace problem, guide me to trace the problem.
Previously it used to give 192.168.1.2/192.168.1.3 it used to vary every boot. FTP also stopped working. I am clueless. My system setup:
Del inspiron 1525:
RAM 3G
HDD 160G
Linux RHEL3 on VMWare
View 5 Replies
View Related
Feb 6, 2010
How can I connect to Linux (which is in a VM) from the host PC using putty? I can ping the 192.168.1.108 from my host PC. And there is sshd process running on Linux. I choose the SSH to connect, but gives error.
View 5 Replies
View Related
Apr 28, 2011
Could you provide me steps on how to connect the guest OS (RHEL 4) using Vmware thru host OS( Win 7)
I am using Bridged connection. How to choose the static IP to be added in the Host OS.
View 1 Replies
View Related
Sep 18, 2009
Centos 5 was set up for me on my server with VMware and XP SP3 as a guest. I have little to no knowledge of centos (or anything Linux) so i tend to leave well alone but i am trying to get a USB printer to work from my networked pcs through XP - Through VMware - Through Centos5 to the USB port on the back of my server. I am reasonably OK with XP but am not a techie so will probably need to be walked through this.
I can see the printer appearing on Centos' equivalent to device manager and when i print everything seems ok with the XP print queue clearing after a few seconds but nothing prints. At a guess i need some sort of software bridge- (is this SAMBA?).
View 5 Replies
View Related
Oct 4, 2010
I'm looking for virtual machine software that supports dual monitors on a Linux guest with a Windows 7 host.VirtualBox supports dual monitors only for Windows guests. VMware Player was extremely slow, so I gave up. I'm not sure it supports dual monitors, anyway. Can anyone recommend a product for what I want to do?
View 1 Replies
View Related
Mar 15, 2011
I would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
View 1 Replies
View Related
Apr 12, 2010
I have RHEL 5 installed on VMware 6.0 and the host OS is Windows 7. My Host is connected to internet using a wireless connection and works on shared IP. Earlier when I had Windows vista as host I have managed to get the internet connection on the RHEL but do not remember how I managed it. Now I need help in setting the internet connection on RHEL. I have set up a NAT connection. But of no use.
View 4 Replies
View Related
Feb 19, 2010
what is the best working software which could backup dual system.Host system is XP pro...and Backtrack on the second one.Is Acronis(xp based) will works?
View 4 Replies
View Related
Nov 27, 2010
I cannot access/ping my Debian server. I know the IP is right (ifconfig, route and ip addr) all gave me 10.0.2.25 (route gave me 10.0.2.0).I cannot ping it from any computer in my netwerk, even when I try to ping it from my Debian itself, it gives me Destination Host Unreachable !(Wierdly, I can ping 10.0.2.2 tho).I am using virtualbox when the netwerk options 'NAT' turned on. When I look at my /etc/network/interfaces/ the last line looks like:iface eth0 inet dhcpShouldn't their be some other stuff listed?
View 6 Replies
View Related
Feb 13, 2011
Q=What will this do?
A=This will read from /root/Desktop/iplist (or anywhere you want to put the list) after it reads the ip it will ping the ip two times. If the remote host is up then it will write the ip to a log. If the ping fails it will display it on the screen, write the ip to syslog so that you can do remote logging, and last it will send the ip by email to a user or a group of users.
Code:
#!/bin/bash
#wrote by Zach Underwood feb-12-2011
#test and wrote on centos 5.5 with sendmail
rm -f /root/Desktop/iplog #This will remove the good iplog
exec 9</root/Desktop/iplist #put full path the file where ip list is. Make sure that the ips are listed one per line.
while read -u9 ip
do
ping -c 2 $ip > /dev/null 2> /dev/null # ping and discard output
if [ $? -eq 0 ]; then # check the exit code
echo "$ip is up" >> /root/Desktop/iplog #write the ip of the hosts that are up
else
echo "$ip is down" # will show on the screen the ips that are not up
logger -p auth.notice "$ip is down" # will write the down host to syslog
echo "$ip is down" | mail -v -s alert user@anydomain.com > /dev/null 2> /dev/null #will send mail users about host down
fi
done
View 3 Replies
View Related
Jan 13, 2010
i know this is crazy, but im using a [URL] and have loaded a copy of "red hat linux 7" on the computer. i have no idea what kind of hardware config/spec stuff i should have in my immediate vision, and if i did i'm not sure how i would make sense of it all. linux loaded fine. didnt save drivers. eth0 not showing in ifconfig report, but lo is connecting to network, other host cannot ping linux and vice versus
can mount a cdrom, but not a usb flash dont quite understand how the load methods work involving /mnt/cdrom/"usbutils-0.86tar.gz" eth0 problems and gnome rpm stupidity keeps me from upgrading sys from old version to a newer version, cant even find the cmd to show me that info, sorry. have usb files i want to mount, dont know how to loAD THE CDROM FOLES, SO EVEN THAT ISNT WORKING OUT HAVE DISCS WITH howtos just need to stay focused on steps to get desired end result, while trying to learn too much info for what im currently doing between all the f!@#@ing windows i have open.
View 2 Replies
View Related
Mar 14, 2010
i am doing a project in which i have to use xen to create virtualised environment.I have already done this.
now i am using the following setup
host os :- opensuse 11.1with ip 192.168.9.19 and with aliasing ip 192.16.9.14
guest os1:- opensuse 11.1 with ip 192.168.9.107
guest os2:- opensuse 11.1 with ip 192.16.9.13
[code]....
View 2 Replies
View Related
Mar 15, 2010
Step 1 : In Hyper-v Machine i have created two Virtual Ports.
Step 2 : Now for these two diff ports two ip address with different subnet mask(e.g 192.168.9.19 and 192.16.9.20)have been assigned(and have checked using ifconfig).
Step 3 : In Host machine i have added one subnetmask for one machine next one for another machine,however i m not able to ping both the ports from either of the machines having static ip 192.168.9.13 or having ip 192.16.9.107.
Step 4 : If i add same subnet mask for both machine it is pinging properly between 2 machines.
View 4 Replies
View Related
Oct 3, 2010
I have been using VMware Player for some time to host Fedora VMware images on Windows XP. I have been using Fedora 11 and 12 (both 32 and 64 bit) and recently started to use Fedora 13.
I use as a base the images provided by thoughtpolice. http://www.thoughtpolice.co.uk/
I usually install VMware tools and also keep the images updated (yum update) which sometimes changes the kernel.
I have recently had problems with the snapshots not having a network when I restore them. So far I don't have the problem with Fedora 11 and do have it with Fedora 12 (but used not to). I do have it with Fedora 13.
In each case the problem goes away when I uninstall the VMware tools and comes back when I install them again.
One of the symptoms is that SElinux complains about not being able to do something with /var/run/vmware-active-nics.
It looks to me that something is incorrect in the actions being taken when the snapshot is being restored. It does not happen every time and sometimes the network restores itself.
The network can be restored by rebooting the image.
View 12 Replies
View Related
Oct 6, 2015
im new to virtualbox and i run linux arch as guest os. now my question is how it can be that the vm has the same ip as my host os.
this is suppose to be diffrent machine isnt it? and how to configure my guest vm to be completely unrelated to my host
View 1 Replies
View Related
Feb 2, 2009
My Windows guests see my VMware Host Only folders as \.hostShared Folders. But when I try to see them from a Linux guest, all I get is frustrated. No permutation of that seems to work. Because the Windows guests see the shared folders I know the host is doing its part in providing them. After two days of not finding an answer on the VMware Workstation forum I finally figured out that the problem really is how to look for them with Linux. With Linux I can turn off all NICs accept the Host Only NIC, put smb://172.16.138.1 into the address bar and see all the shares on the host, but not the folder designated as the host only folder. How to look for the shares with Linux?
View 3 Replies
View Related
Aug 28, 2010
I have installed Red Hat Eterprise Linux as a Guest OS using VirtualBox on the Host OS Windows XP SP 2 on my PC. I want to access my local / intranet web site from this Guest OS which is running on the top of on Windows XP, the Host OS. I am not sure as to what IP Settings I need to do. Though I am able to access Internet from both the OSes. The IP of this Guest OS is:
Code:
[root@localhost ~]# ifconfig eth0
eth0
Link encap:Ethernet HWaddr 08:00:27:30:E9:72
inet addr:10.0.2.15 Bcast:10.0.2.255 Mask:255.255.255.0
inet6 addr: fe80::a00:27ff:fe30:e972/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:1871 errors:0 dropped:0 overruns:0 frame:0
TX packets:1926 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:1427538 (1.3 MiB) TX bytes:415769 (406.0 KiB)
Interrupt:11 Base address:0xd020
[root@localhost ~]#
I have installed Microsoft Self Loop Adapter (Autoconfiguration IP Address: 169.254.25.129) on the Host OS Windows XP. There is another adapter: VirtualBox Host-Only Network whose IP Address is: 192.168.56.1. So, how can we access intranet web site from the Host OS to Guest OS and vice versa. I also want to access this virtual Red Hat machine /console from within windows XP using PUTTY application. From Windows XP the Red Hat machine is pinging. But when I use the IP to access the machine through PUTTY it doesn't work.
View 17 Replies
View Related
Dec 9, 2009
I don't want to use image file as disk, but would like to allocate a disk for guest os. say it's /sda6, then do I need install guest os on host os? or can I install while the system is booting and only import a guest os from that? Do I have to mount the disk?
View 2 Replies
View Related
