im new to virtualbox and i run linux arch as guest os. now my question is how it can be that the vm has the same ip as my host os.
this is suppose to be diffrent machine isnt it? and how to configure my guest vm to be completely unrelated to my host
Debian Testing host, Winduhs XP guest. Winduhs is not allowed to directly access The Internets, and I am not setting up bridging as that makes it possible for the guest to mount layer 2 attacks on the LAN. I need for the guest to tunnel through the host without being able to see anything on the host, so it can then get access to The Internets, while being protected by iptables (Shorewall).
Used to be with VMware I had host-only set and the guest in a different class c (192.168.2.1) from the host (192.168.1.1) I turned on ipforwarding, set Shorewall rules, and it all worked. Now I have everything set with VirtualBox, and it does not work. Guest can ping its interface but not host. Host can ping vboxnet0. Host is supposed to masquerade guest's 192.168.2.1 through to the default out at 192.168.1.1, but it's not. I think a clue is in routing, but I don't know what's wrong.
[code]....
I have VirtualBox v3.1.0 r55467 running on f12 2.6.31.6-162.fc12.i686. The guest is Windows XP SP3. I need to enable bridged mode for the virtual network interface on the guest. Everytime I enable bridge mode the following error occurs.
Quote:
Failed to start the virtual machine Windows XP. Failed to open/create the internal network 'HostInterfaceNetworking-wlan0' (VERR_SUPDRV_COMPONENT_NOT_FOUND). One of the kernel modules was not successfully loaded. Make sure that no kernel modules from an older version of VirtualBox exist. Then try to recompile and reload the kernel modules by executing '/etc/init.d/vboxdrv setup' as root (VERR_SUPDRV_COMPONENT_NOT_FOUND). When I run '/etc/init.d/vboxdrv setup' i get the following compilation error:
Quote:
Stopping VirtualBox kernel module [ OK ]
Removing old VirtualBox netadp kernel module [ OK ]
Removing old VirtualBox netflt kernel module [ OK ]
[code]....
dmesg gives me nothing. I have scoured the web .. and even asked on #vbox and #fedora cant get.
I have tried a few times already the following procedures: start a new installation (each time, I create a new VBox VM) with the Fedora 12 DVD iso attached to the DVD drive of the VM. I select the default setting, like US english, US keyboard, local time (GMT +8), standard installation ... etc). The installation process had been smooth to the screen the system asking for a reboot after installing something like 1100+ packages. Then I click the reboot button offered. The VM restarted but each and every time, it came up with the following error message:
Booting from local disk...
FATAL: INT18: BOOT FAILURE
There was no other error message durint the installation process. It would be very much appreciated if some one can tell me what went wrong and how to solve it. I believe even I try again the same way, it will end up with same result. Is it a software or hardware problem? In case software problem, is it Fedora or VirtualBox?
Quote:
I'm working in php / mssql project and I'm working on php side. I try VirtualBox to access to mssql from linux. I'm using VirtualBox 3.2.8(Downloaded from VirtualBox website) Hosted On Ubuntu 10.04, and my Guest OS is Windows 7. I followed some tutorials on how to connect from host to guest, but all failed... how to connect from ubuntu (host) to windows 7 (guest)
pretty comfortable at the command line and in kde. found 2 'supplementary kernel drivers' for virtualbox at slackbuild (thank you heinz!). followed the how-to at slackbuild and built and installed both packages, but additions weren't working. (i thought they were standalone) noticed the 'supplemental' in their description, and so installed the guest additions for linux from vbox site. additions still not working. at this point i start restarting my slackware vm, and redoing everything in various sequences. finally, additions work! but i'm not sure why! critical pieces and sequence for getting guest additions working once i have slackware installed?
View 1 Replies View RelatedI used to be able to access the web server I had running on my guest OS in Virtual Box from my host OS. I also had it set to the network settings of "Host Only Adapter". Then I needed to access the internet directly on the gues OS, so I changed my settings on the guest OS to "NAT" (in virtual box), and in /etc/network/interfaces, I removed the loopback stuff and the static IP I'd put in. Now no matter what I do, I cannot get it back to being accessible from the host os! I even did a completely NEW install of Ubuntu guest OS in Virtual box Guest OS: Ubuntu 10.04 Desktop Host OS: OpenSUSE 11.3 VirtualBox: 3.2.6
View 5 Replies View RelatedWith VirtualBox you can share a directory on the host machine with the guest machine. Can you share a directory on the guest machine with the host machine? In my setup the host is Windows 7 and the guest is Ubuntu. Can I have a directory on the Ubuntu file system accesible from Windows?
View 1 Replies View RelatedI have set up my guest OS in VirtualBox so that it has a static ip and is using a bridged adapter. As a result, I can see the webserver that's hosted in guest from my host OS's web browser. However, for some reason my current setup does not allow my guest to reach the internet. What settings do I need to enable both?
View 1 Replies View RelatedRecently I've been unable to load web pages, hosted on my Ubuntu Guest in Apache, from my OSX Host. In fact, I can no longer even ping the Guest OS from the Host. In the past, when I did ifconfig on the Guest, I got an IP of 10.0.1.n. Now I'm getting 10.0.2.15--the default NAT Address. The thing is, I didn't change any settings recently. What I did do is run software update for OSX, Ubuntu, and updated VirtBox.
Current Versions:
VirtBox 4.0.8 r71778
Host: OSX 10.6.7
Guest: Ubuntu 11.04
why I can no longer access my Guest OS from my Host? I spent hours on this last night, to no avail. What would cause the Guest IP to change from 10.0.1.n to 10.0.2.15? As I say, I manually made no config changes.
I have a Win7 laptop with the latest version of VirtualBox installed. It's a dual core proc with ram to spare. So, I installed Slack64-13.1 and it rocks! I'm really impressed that Slack is running at what appears to be native speed, but in virtual machine. Hardware response is normal, WIFI and LAN are both working great for my normal tasks.So, I downloaded a few much needed patches, and new ISO image for one of my old desktop PCs. Now, my problem is I can't connect my USB cdwriter to my virtual slackware or share folders in the Win7 install with the virtual slackware. I read a few of tutorials on the Oracle VBox website, and several of the ones here on LQ, and none of them seem to solve my problems.
View 3 Replies View RelatedI would like to share a folder from a Linux Guest with a Windows host (with read and write access if possible) in VirtualBox. I read in these two links: here and here that it's possible to do this using Samba, but I am a little bit lost and need more information on how to proceed.
So far, I managed to set up two network adapters (one NAT and one host-only) and to install Samba on the Linux guest, but I have the following questions now: What do I need to type in samba.conf to share a folder from the Linux guest? (the tutorial provided in one of the links above only explains how to share home directories) Are there any Samba commands that I need to run on the guest to enable sharing? How do I make sure that these folders are only available to the host OS and not on the Internet? Once the Linux guest is setup, how do I access each of the individual shared folders from the Windows host? I read that I need to mount a drive on Windows to do this, but do I use Samba logins, or Linux logins, also do I use localhost? or do I need to set up an IP for this?
Setup:
1. Microsoft Windows 7 64-bit Professional HOST Operating System
2. Oracle VirtualBox 4.0.6r71416 on top of Windows 7
3. Ubuntu 10.04 Lucid Lynx 32-bit GUEST Operating System in VirtualBox
I successfully installed the above configuration on May 15, 2011. I had some difficulty getting the Host-Only VirtualBox Adapter to work. I was forced to make a subtle change to the Windows Registry in order to get the Adapter to work correctly. I was successful. I used the Debian Update Manager to update my installation of Ubuntu. Nothing changed on the Windows 7 side. Now, Windows 7 says that the Host-only adapter is enabled, but I don't have a connection to the Ubuntu OS. I can't use PuTTY or WinSCP. When I invoke ipconfig on the Windows side, 192.168.56.101 is the IPv4 address. When I invoke ifconfig on the Ubuntu side, there isn't anything.
I've recently installed Ubuntu 10.10 64 bit (say host H). I also installed Ubuntu inside VirtualBox on H using the same image (say Guest G). I'm working on a fairly large java project. I've installed the same version of jdk (sun-java-6) on both H & G. To compile my project - it takes ~3 mins 10 secs (consistently) on H, whereas it only takes ~1 min 5 seconds on G . The full build (compile + tests) takes ~29 mins on H, whereas it takes only ~7 mins on G. Tests do a lot of writes to mongodb. This is very puzzling. I think it has something to do with fsync disk io etc. But I'm not proficient enough to dig further. Maybe it has something to do with partition sizes of H, G?
View 4 Replies View RelatedIs it at all possible to disable internet access for the Debian host while providing internet access to the VirtualBox guest(s)?
I plan to only hook up the host to the internet for updates, upgrades and installations, although if I can, then I will make a Debian guest to test everything out and download the files from there and install everything on the host without even a single host connection point.
Is this the indomitable approach to intercommunication security? If not, then what haven't I thought of yet?
I am a very beginner Debian user, Debian is installed in VirtualBox, which is hosted on Windows. I try to install VirtualBox Guest Additions without success.
First method: in VirtualBox menu, Devices->Install Guest Additions I receive a message: Cannot find the autorun program. Screenshot here: [url]
Second method: in shell I do su and then navigate to the cd rom and run the script /media/cdrom/VBoxLinuxAdditions.run by hand.
I get Permission Denied. Screenshot here: [url](I basically follow the tutorial [url]
How to install it?
OpenSUSE installed in a Virtualbox Virtual Machine and I want to set a shared folder.
1 - Set up a Virtual Machine and install OpenSUSE 11.2
2 - Create a shared folder on host (HostFolder)
3 - Setup the shared folder in Virtualbox Via the Virtual Machine details or via Devices > Shared Folders...
4 - Install dependencies for running the Virtualbox installer You need to install the right development kernelpackage for your machinetype (use 'zypper search -i kernel' to see what's installed) sudo zypper make gcc kernel-source kernel-hosttype/default-devel
5 - Run the Virtual Machine and go to Devices > Guest Additions This mounts an iso image in your OpenSUSE guest.
6 - Open a root terminal and run
cd /usr/src/linux
make oldconfig && make prepare && make scripts && make dep
cp ../linux-obj/$HOSTTYPE/default/Module.symvers .
make prepare
* A commenter on previously mentioned thread says this step is unnecessary but it doesn't work without on my system. I suggest trying step 7 first and returning to step 6 if that fails. *
7 - Run ./VirtualboxLinux yourhosttype .run from the mounted iso image.
8 - Create shared folder in OpenSUSE (GuestFolder)
9 - Test with sudo mount -t vboxsf HostFolder /home/user/GuestFolder It works? Great! Let's set up the system so it automounts for your regular useraccount instead of root-only access.
10 - Add this line to /etc/fstab HostFolder /home/user/GuestFolder vboxsf defaults,uid=1000,gid=1000 0 0
11 - It works for me but if it still doesn't automount after a reboot; sudo mount -a
I installed a Fedora 14 guest on a Fedora 14 host with Virtualbox, then i run these commands on the guest:yum install kernel-devel kernel-headersbut if i try to install the virtualbox-guest additions on the guest, is still complains about that it's unable to find the kernel source directory?Ha anyone succeded installing the guest additions on a guest Fedora 14?
View 2 Replies View RelatedI had a lot of trouble installing Guest Additions within the Fedora 13 Guest on a Linux host. I had to mount the vboxGuestadditions.iso from the Device --> CD/DVD Devices menu. Then I located the appropriate package for my system. In my case it was the AMD64 Linux version.I ran this as administrator in Terminal. I used the "bash" command followed by the package name. This was after CDing the the appropriate directory. The packaged installed, I then rebooted and it worked fine. (Something that would make this easier is to load a script into nautilus that would allow me to open a locatation as administartor at the open window. I'm sure there is something in Fedora to do this but I couldn't find it in a hurry so I used the command line way).
View 5 Replies View RelatedI am running Lenny and using VirtualBox OSE 1.6.6. In order to try squeeze I installed it in a VM. I tried to install Guest Additions also, but i get this error:
VirtualBox 1.6.6 Guest Additions installation
Building the VirtualBox Guest Additions kernel module...
Building the shared folder support kernel module...
Unable to build the kernel module.
I checked what /var/log/vboxadd-install.log had to say:
/usr/src/linux-headers-2.6.32-5-common/include/net/neighbour.h:115: error: variably modified a at file scope
/tmp/vbox.0/utils.c: In function 'sf_path_from_dentry:
[code].....
I tried with 3 versions of the kernel 2.6.32-5-686,2.6.32-5-484,2.6.32-3-686 but I cannot get it to work using any of them. Also I tried to install version 2.6.30-2-686 but I couldn't since synaptic said that it Depends: linux-kbuild-2.6.30 but it is not installable.
Tryin to update guest additions to match new host. Change fstab to allow exec. Still get permission denied.
debian:/home/bill# cd /cdrom
debian:/cdrom# ls -lh
total 30M
dr-xr-xr-x 3 root root 2.0K 2009-12-17 07:37 32Bit
dr-xr-xr-x 2 root root 2.0K 2009-12-17 07:37 64Bit
-r-xr-xr-x 1 root root 217 2009-12-04 04:06 AUTORUN.INF
[Code]...
I have VirtualBox 3.1.2r56127 running on WindowsXP host, and Debian Lenny as guest.Everything seemed to work before I finished the vboxadd setup adding VirtualBox client support. Now the mouse responds to right click opening a menu in right bottom
corner of the window, but nothing else works mouse wise.
I've installed fedora 15 on virtualbox as my guest OS.I've configured bridged networking and I've set my router to assign an IP to it.when it boots up,I have 2 devices shown via "ifconfig" which is "lo" and "p2p1" and none has the ip assigned to it.I'm unable to access the Internet. How can I configure it to do so?I've tried following this tutorial: [URL] but the file "ifcfg-ethX" doesn't exist...it only has ifcfg-lo..... I've installed fedora 15 spin edition which doesn't have a GUI for me to edit network settings...
View 13 Replies View RelatedI'm using the newest VB 3.18 Lucid AMD64 .deb downloaded from Sun. Previous versions have not had USB support in Lucid. Now, when I start the XP guest, all my USB devices seem to be detected. My USB phone is shown as 'busy' as is my mouse. However, both my printers remain greyed out and are shown as being 'unavailable'. I have tried manually adding the printer filters before starting the guest, but no dice. Is anyone else having this problem? Any ideas as to a possible cause?
View 7 Replies View Relatedin my opinion, it's wrong to turn off the operating system by pushing the power off button on the hardware directly but is it okay to do that in the Virtual Machine I am running Windows XP on VirtualBox sometimes I feels lazy to wait for windows to shut down so I just close the window that runs the guest OS will that do any harm to the host system? or the guest system itself? If I saved all the files that is important, I couldn't think of any side effect.
View 3 Replies View RelatedSince my upgrade to 13.37 + VirtualBox 4.0.4 (from SBo) I'm having trouble with one of my VMs containing a PostgreSQL installation (also from SBo) which has been running fine before on 13.1 + VBox 3.2.10.
This is what happens: I'm starting an I/O heavy job on the DB that should take about an hour but never finishes because the virtual disk stops working after 10 to 40 minutes.
Code:
ata1.00: exception Emask 0x0 SAct 0x7fffffff SErr 0x0 action 0x6 frozen
ata1.00: failed command: READ FPDMA QUEUED
ata1.00: cmd 60/00:00:e8:11:44/01:00:02:00:00/40 tag 0 ncq 131072 in
res 40/00:00:00:00:00/00:00:00:00:00/00 Emask 0x4 (timeout)
lots of these
[Code]...
I'm trying to install the Virtual Box Guest Addition for my openSUSE 11.3 VM, but I'm having some problems. The Virtual Box manual says I need to install the kernel-default-devel package, so I did that, but it also says :
Make sure that your running kernel (uname -a) and the kernel packages you have installed (rpm -qa kernel*) have the exact same version number. Proceed with the installation as described above.So I ran both commands and here is the output :
edgar@linux-t7uc:/> uname -a
Linux linux-t7uc 2.6.34-12-default #1 SMP 2010-06-29 02:39:08 +0200 i686 athlon i386 GNU/Linux
edgar@linux-t7uc:/> rpm -qa kernel*
[code]...
the devel packages are version 2.6.34.7-0.7.1 and the kernel is version 2.6.34-12. How do I install the correct version of the kernel-default-devel and kernel-devel package with zypper? I thought maybe the versions could be compatible somehow, so I tried to install the Guest Addition and here's the result :
edgar@linux-t7uc:/media/VBOXADDITIONS_4.0.4_70112> sudo sh ./VBoxLinuxAdditions.run
root's password:
Verifying archive integrity... All good.
Uncompressing VirtualBox 4.0.4 Guest Additions for Linux.........
[code]....
I have an Ubuntu guest installed on Virtualbox 4.0.4 running on Windows 7 Home Premium. I have two firewall rules for Vbox which allow any, any inbound for both TCP and UDP and those rules have edge traversal enabled. I have host ports 9080 and 9022 forwarded to 80 and 22 on the guest. The Win7 box is on an Ethernet connection
After some testing, I have a netbook with a Wifi connection and Ubuntu netbook remix which cannot make an ssh connection to the Ubuntu guest.
But, the same netbook can telnet to port 9080 on the Win7 machine's address and successfully connect to a web server running on port 80 of the Ubuntu guest.
In order to check this out, I ran initctl stop ssh on the Ubuntu guest, verified thagt port 22 had no listeners, and ran ssh with /usr/sbin/sshd -d -e. This shows various bits of debug info from the console. Then I ran Putty on the win7 machine to connect to port 9022 on it's own IP address (that it got from DHCP) and made a successful connection to the guest Ubuntu.
The variable that I don't know much about is the landlord's cable router setup, but I can't figure out why that would block packets to 9022 but not packets to 9080.
I'm using Virtualbox to test Meerkat. I have the same problem with Ubuntu & Xubuntu,
Here is the output from VBoxLinuxAdditions-x86.run..
Here's the last few lines from vboxadd-install.log..
I'm running Ubuntu 10.10 x64 as a guest in VirtualBox on top of Windows 7. I recently bought a second monitor, and I want to set up my Ubuntu guest to use both monitors. I configured VirtualBox to give two displays to the VM, and two windows are displayed when I run the VM, however, the Ubuntu guest only uses the primary screen and does nothing with the second--the second screen is just black.
When I go to the monitor settings, only the one monitor is detected (as an "unknown monitor") I have the latest guest additions installed and the driver under System-Administration->Additional Drivers is shown as installed and working correctly. I don't have any issues with the single display--it shows in the correct resolution, and works fine if I set it to fullscreen or seamless mode. Any thoughts on getting Ubuntu to detect the other screen?