How can I Install DLink wireless driver on Ubuntu ?
I had downloaded the driver . The file contains some files like MakeFile and ifcfg-wlan0 ,etc
+ a tar.gz file . which contains c or c++ source codes.
There are 4 folders also .
I downloaded the Dlink wireless G dwa-110 usb driver but I'm getting "rt73.ko failed to build. make[module]error 1" when compiling it.
I have installed the kernel-source and kernel-syms but I still get the same error. What am I doing wrong?
I'm running openSuSE 11.2 64 bit.
I have a problem installing mi dlink dlw-g122 wireless usb adapter.I installed the drivers, in fact when executing
ndiswrapper -l
the output is
dr71wu driver present, hardware present
but when I try to execute
modprobe ndiswrapper
I have this error:
FATAL : Error inserting ndiswrapper (/lib/modules/2.6.12.9-386/kernel/drivers/net/ndiswrapper/ndiswrapper.ko): Operation not permetted
I am new to Fedora have not used it in many years. I have zero networking knowledge. I read several threads on getting the RT 2870 USB connection working. But had no joy after install the three rt2870 kmod items from RPMFusion and rebooting. get this first step in networking done right?
View 5 Replies View Related10.10) now, and only use windows as my DVR (what im currently trying to change). To that end, i have a Hauppauge 2250 video capture card, and Steven at KernalLabs has an alpha release that has been said to work very well with mythTV.
Anyways, i followed one of the posts and successfully compiled the driver using "sudo make menuconfig." I attempted to install with the "make install" command, and the first half of the driver seemed to install and the second half (firmware related) received errors.
make -C firmware install
make[2]: Entering directory `/home/mlavigne/saa7164-v4l/v4l/firmware
Installing firmwares at /lib/firmware: vicam/firmware.fw cp: cannot stat `vicam/firmware.fw: No such file or directory
dabusb/firmware.fw cp: cannot stat `dabusb/firmware.fw: No such file or directory
dabusb/bitstream.bin cp: cannot stat `dabusb/bitstream.bin: No such file or directory
ttusb-budget/dspbootcode.bin cp: cannot stat `ttusb-budget/dspbootcode.bin: No such file or directory
[Code]..
I've just installed CentOS in my PC - removed win 7. and i have a problem in driver installing these are the commands :
make
make install
i have windows vista with a broadcom 802.11g network adapter.I dont know much about computers but i would like to know how to install it on the ubunto OS so i can use internet ?
View 2 Replies View RelatedI am using an HP dv6 series laptop. The wireless works fine in Ubuntu 9.10 (must install the Broadcom STA wireless driver). When I try to use Kubuntu 9.10 my computer crashes when I try to install the driver. Is there any particular reason why it works in one and not the other?
View 6 Replies View RelatedI have Dell Wireless N-card 1520 on my Dell Studio 15 laptop. I have installed Ubuntu10.04 in it. My network card was not able to detect wireless connections. I have even installed 'Windows Wireless Driver' using ndiswrapper. I have latest driver for card. But when i click install .inf file , nothing happens or gets installed.
View 5 Replies View RelatedI have a desktop and I just installed ubuntu 10.04 as a dual boot with windows 7. My desktop has a wireless ZEW1642S card. I don't have access to a wired internet connection, but I can use the wireless on my windows 7 fine. It seems like there is no driver for it to work on ubuntu, and since I don't have an internet connection while in ubuntu, it seems I can't update it of course because I need internet to update. My wireless network does NOT have a password if that even means anything for this. I have the exe installer for the driver for it but I don't know how I'm supposed to get the INF file or whatever.
View 9 Replies View RelatedI just installed Ubuntu 11.04 on my Dell Mini 10v and for some reason I just realized that my wired network connection is not working for some reason. And not in windows either. But my wireless works in windows. So I have downloaded the latest Broadcom STA wireless drivers for linux and have tried to follow this tutorial to install it. But when I get to:
make -C /lib/modules/<2.6.xx.xx>/build M=`pwd` clean I can't get it to work. It says:
make: Entering directory '/usr/src/linux-header-2.6.38-8-generic'
scripts/Makefile.build:44: /usr/src/linux-header-2.6.38-8-generic/pwd/Makefile: No such file or directory
make[1]: *** No rule to make target '/usr/src/linux-header-2.6.38-8-generic
[Code]....
I have a Dell Inspiron E1505, which has the Dell Wireless 1505 (Broadcom) card. To run the card, I installed the Broadcom STA wireless driver, which seems to activate the wireless card OK. The problem is that once I installed that driver my onboard Ethernet card was deactivated (and yes, it is enabled in BIOS). I had to remove the wireless driver to get the Ethernet back. Does anyone have ideas? I haven't found this problem listed elsewhere. I am running Ubuntu 9.04 with no other problems.
View 5 Replies View RelatedI am not really that good with linux, yet, I have a smc 2602W v3 wireless pci card, and I want to install it on linux, so I could access the internet, but I haven't found any solutions yet. Btw latest ubuntu desktop version. Info about the card: [URL]
View 3 Replies View RelatedI have a Wireless PCI-Express Adapter which I wish to install the drivers, though am having difficulty. The chipset on my card is a Ralink. I have visited the Ralink Website Ralink corp. and downloaded the RT2860 Wireless Lan Linux Driver version 2.3.0.0. I have extracted the files within my home directory. I have read the readme file, and from what I understand I have needed to do... I have typed in the Make command as a "super user". Unfortunately I have had no success and it states the following output.
[Code]...
I'm new to openSUSE, and Linux in general. I have downloaded the following file from the D-Link site:
dwa140_BETAdriver_1201.zip
I've copied it to a dvd, and have placed the dvd in my openSUSE machine. I've made several attempts at installing this myself, but Linux has me a bit stumped.
I recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies View RelatedI'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:
[Code]...
i was given a new DLink DWA-130 REV E draft N usb wireless adapter and was wondering if there are linux drivers for it?
View 2 Replies View RelatedI'm having trouble installing a usb wireless adapter.
Code: # lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c526 Logitech, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 0bda:8171 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(It came with a linux driver but not sure how to install it)
Code: /2009_1106_RT3070_Linux_STA_V2.1.1.0 (2) # ls
chips
iwpriv_usage.txt
README_STA_usb
sta
common
Makefile
RT2870STACard.dat
sta_ate_iwpriv_usage.txt
include
os
RT2870STA.dat
tools the readme just has a change log, no instructions.
I am on a desktop that depends on a USB wireless adapter for it's internet, and I need to install the driver for it. I have downloaded the driver via another computer and isolated the .inf, .sys, and .bin files for the driver, and am trying to install ndiswrapper in order install the driver. the problem is I cannot get ndiswrapper to install, the 'make' command pulls in a laundry list of errors along with the 'make install' command. Is there something I'm missing? I have managed to update the kernel via another computer running the latest kernel, but still receive errors.
View 8 Replies View RelatedIt has been haunting me for weeks and I haven't been able to fix it so far: When I installed the wireless driver 43XX series on my laptop using a wired internet, I saw the wireless network for a while and after I rebooted my system, My kernel(31) got corrupted and I got error "kernel Panic (and some sync error)",Thus I started using an older kernel(14),Now When I install wireless driver or mobile broadband driver(wvdial), they get vanished after the reboot and my mobile device modem isn't detected.But they are installed in my system(as shown by synaptic package manager but doesn't seemt to work) I desperately want to use mobile broadband.
View 1 Replies View RelatedHow To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
I am very new to Linux and need to install a driver for my wireless card. I am trying to install the RT3070 v2.0.1.0 driver from Ralink. I am running Fedora 2.6.29.4-167.fc11.i686.PAE. I have read the thread in the Solutions section about this driver, but unfortunately this is somewhat above my levels of comprehension, and I don't really know where to start.
Here is the output.
[chips@fedora wireless_utility]$ tar xvf RT3070_Linux_STA_v2.0.1.0.tar.bz2
tar: Record size = 8 blocks
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/2870_rtmp_init.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/action.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/ba_action.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_data.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_data_2870.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_info.c .....
cp: cannot stat `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v2.0.1.0/RT3070STA.dat': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v2.0.1.0/os/linux'
make: *** [install] Error 2
[root@fedora 2008_1225_RT3070_Linux_STA_v2.0.1.0]#
Installed 11.04 after a Series of Harddrive Problems. HD was Cleared so No XP installed, running ubuntu Only. Compaq Presario C500 - Broadcom 4312 Wireless.
View 12 Replies View RelatedThe relevant details of my setup are:
Samsung R522 laptop
Realtek RTL8192E wireless network controller (PCI)
Fedora 12, kernel 2.6.32.9-70.fc12.i686 (automatically updated using software update)
My problem is that my wireless card has never worked - basically there aren't any widely available linux drivers, and there are many threads on getting the RTL8192E to work on many different forums, e.g. here, but none specifically for Fedora, so I think that this thread could potentially guide many more users. FYI, my hardwired network connection works perfectly.
Fantastically however, by emailing Realtek support, they'll send you their Linux driver, which most people have claimed works perfectly (although why they haven't just put it on their website is beyond me). SO, I've got a Linux driver for my wireless card. When Realtek emailed me to send me the driver, they said to just 'cd' into the driver directory, then do
su
make clean
make
make install
reboot
./wlan0up or ./wlan1up
OK, so I tried to do this and get the following error:
make: *** /lib/modules/2.6.32.9-70.fc12.i686/build: No such file or directory. Stop.
make: *** [all] Error 2
I don't know enough about linux to understand this error. I really don't want to have to recompile my kernel, and I hope there is some way to install this driver with not too much hassle. How to overcome this error, and install my wireless driver so I can get wireless network access on my Fedora 12 operating system. I've found Fedora 12 really easy to use so far, but this is proving quite hard!
This is the output of 'ls -lh' in the folder which seems to be causing the error, namely /lib/modules/2.6.32.9-70.fc12.i686/
total 3.1M
lrwxrwxrwx 1 root root 46 2010-03-16 22:53 build -> ../../../usr/src/kernels/2.6.32.9-70.fc12.i686
drwxr-xr-x 2 root root 4.0K 2010-03-03 05:28 extra
drwxr-xr-x 11 root root 4.0K 2010-03-16 22:53 kernel
-rw-r--r-- 1 root root 498K 2010-03-16 22:53 modules.alias .....
currently running karmic on an old gateway laptop with kernel 2.6.31-22-generic and, as is par for how I handle challenges, I've jumped in with both feet - which is to say this is not a dual-boot situation. I've spent some time reading the forums (and other sources of information) and am grateful for all the knowledgeable people who are willing to share what they know.
My operating system seems to be functioning properly.I can get online via ethernet, but not via wireless. I have a lucent orinoco gold PC24E-H-FC (PCMCIA) card, which the computer isn't seeing. I am trying to follow the instructions here: [URL] to install the driver. Everything is going well until I get to the sudo make line. At that point I get the following display:
make -C /usr/src/linux-headers-2.6.31-22-generic M=/usr/src/orinoco-0.15rc4 KERNELRELEASE= modules
make[1]: Entering directory `/usr/src/linux-headers-2.6.31-22-generic'
/usr/src/orinoco-0.15rc4/Kbuild:8: *** Wireless extensions are not enabled. Stop.
[code]....
how I can fix it so I can continue on with the instructions. (For the record - if I just continue on, I can change directory in the next line, but I cannot remove either hermes or orinoco as "no such file or directory" seems to exist.)
I have recently installed Ubuntu 10.04 beside my Windows XP on my laptop:
Dell XPS 1330
I`m now facing some problems with my new OS :
1. The driver for my wireless network card isn't recognized although I have installed the recommended driver which was in Ubuntu Hardware Driver section.
2. When I connect my laptop to my TV using HDMI port, the screen is OK but there is no sound!
3. When by any reason my network cable is unplugged, the whole network service goes down and I have to restart the system.
lspci results:
I have had to install the B43 diver before to get wireless to work.
View 5 Replies View RelatedI'm very new to Debian (and Linux in general), and am currently taking a Linux course at college... I'm trying to get Debian running on my MacBook Pro (late 2009 model) and it's been complicated but I've got the operating system installed on it... I'm just having a few problems, the biggest right now of which is my wireless card, which doesn't work. So, I found instructions on the Debian Wiki for getting the driver for it, but it's not compiled already and I have little knowledge of manually installing stuff through Linux...
View 2 Replies View Related