Ubuntu :: Compiling Driver For First Time Error Installing?
Nov 5, 2010
10.10) now, and only use windows as my DVR (what im currently trying to change). To that end, i have a Hauppauge 2250 video capture card, and Steven at KernalLabs has an alpha release that has been said to work very well with mythTV.
Anyways, i followed one of the posts and successfully compiled the driver using "sudo make menuconfig." I attempted to install with the "make install" command, and the first half of the driver seemed to install and the second half (firmware related) received errors.
make -C firmware install
make[2]: Entering directory `/home/mlavigne/saa7164-v4l/v4l/firmware
Installing firmwares at /lib/firmware: vicam/firmware.fw cp: cannot stat `vicam/firmware.fw: No such file or directory
dabusb/firmware.fw cp: cannot stat `dabusb/firmware.fw: No such file or directory
dabusb/bitstream.bin cp: cannot stat `dabusb/bitstream.bin: No such file or directory
ttusb-budget/dspbootcode.bin cp: cannot stat `ttusb-budget/dspbootcode.bin: No such file or directory
[Code]..
View 3 Replies
ADVERTISEMENT
May 24, 2011
How can I Install DLink wireless driver on Ubuntu ?
I had downloaded the driver . The file contains some files like MakeFile and ifcfg-wlan0 ,etc
+ a tar.gz file . which contains c or c++ source codes.
There are 4 folders also .
View 2 Replies
View Related
Jun 22, 2011
I've just installed CentOS in my PC - removed win 7. and i have a problem in driver installing these are the commands :
make
make install
View 11 Replies
View Related
Sep 11, 2010
I know Ive been a lil redundant, there are a lot that has been said about this cam, some made them work, others not. My point is, I haven't. Once it worked, about 2 years ago, but suddenly after the Jaunty updates it has stopped.
Here is my output from make:
Quote:
View 1 Replies
View Related
Nov 28, 2009
I downloaded the Dlink wireless G dwa-110 usb driver but I'm getting "rt73.ko failed to build. make[module]error 1" when compiling it.
I have installed the kernel-source and kernel-syms but I still get the same error. What am I doing wrong?
I'm running openSuSE 11.2 64 bit.
View 4 Replies
View Related
Apr 10, 2011
I am running Debian 6 & picked up a wireless nic for my desktop since I want to locate it in an area that would be a challenge to wire. I downloaded the driver and ran make and got the strange error below. I tried doing some web research but could not find anything. I also booted up the machine w/ a Ubuntu Live disk to ensure the card was good and found no issues ( I also have the same nic in my kids machine running Ubuntu 10.10. )
[code]...
View 10 Replies
View Related
Jun 25, 2010
I am trying to install a software but I get error as under -
[Code]...
View 9 Replies
View Related
Sep 22, 2010
I tried to compile Atheros AR8152 PCI-E Fast Ethernet Controller driver for fedora 13 64 bit kernel version is 2.6.34.7-56.fc13.x86_64. I have installed kernel source , kernel header and necessary all things to compile it. (linux-firmware-20100806-4.fc13.noarch also installed). I tried AR81Family-linux-v1.0.1.13 source from Atheros web site.
But when I try to make it it give following error.
Code: Makefile:173: *** *** Aborting the build. ***
This driver is not supported on kernel versions older than 2.4.0. Stop. It is not compiling issue because I compiled and installed broadcom wireless driver.
Makefile is attached here (renamed as Makefile.txt -> Makefile)
View 5 Replies
View Related
Aug 4, 2011
Is it possible to install a video driver at the time of the installation of the operating system? I have made multiple installation attempts using the various 11.4 x64 live & non-live versions. As soon as I get past the splash screen with the boot options, the display becomes corrupt & continuing is impossible. I have attempted using the various video options under the F6 menu (text mode, vesa, safe mode) without success.
I am reasonably certain it is a failure of the video driver. I have observed the identical behaviour while installing MS Windows with the incorrect video driver. The video chipset manufacturer does provide a linux driver on their website. It is a .run file. I have the .run file on a USB stick along with the OS files. This is a link to the hardware platform I am attempting to install to. Is it possible that my video chipset has insufficient video memory?
View 9 Replies
View Related
Sep 10, 2010
error: No output seen in over 300 sec... (Is the CD-ROM/DVD source repository enabled? It shouldn't be!) error: Package install command failed with error code 255 Would you like to retry installing the missing package(s) (y=yes*, n=no, q=quit) ?
I've tried this [URL] but it didn't work for me. My sources.list already had the #. By the way I'm a new user to ubuntu and I'm having a pretty good time. Almost starting to feel at home in this OS. edit: I'm sorry. I realized I posted in the wrong section.
View 2 Replies
View Related
Jan 20, 2010
I am new to Linux, but I can't produce any sound out of my speakers. So I downloaded the driver for my sound card from my motherboard manufacturer (it is an on board sound card). Now, if I am right I need to run ./configure . I did this and the following thing happend: Code: checking for gcc gcc
checking for C compiler default output... a.out
checking whether the C compiler works... yes
checking whether we are cross compiling... no
checking for executable suffix...
checking for object suffix... o
checking whether we are using the GNU C compiler... yes
checking whether gcc accepts -g... yes
[Code]...
View 7 Replies
View Related
Jun 16, 2011
I am porting a Python program to Linux (which I'm a first time user of). The program uses ADAM modules for which I need the driver installed. My problem is compiling a file "usbserial.c" into "usbserial.o" in order to do makefile install. I've replaced the config.h with autoconf.h. I entered "sudo apt-get upgrade", though I don't know why. Now my src folder looks like this:
[Code]....
View 2 Replies
View Related
Nov 28, 2008
I selected the zc0301 driver as module when i compile the kernel...and i copied the "zc0301.ko" file from default kernel...but when insert using "insmod" its not working..showing the error..
insmod: error inserting 'zc0301.ko': -1 Invalid module format
How to insert this driver?
View 9 Replies
View Related
Apr 6, 2011
I am trying to reinstall ATI propietary graphics driver fglrx on Xorg 1.10.0.901, but it always fails with (something similar to): Code: ./default_policy.sh does not support version default:v2:x86_64:lib32:none:[my kernel] make sure that version is correctly set by --iscurrentdistro
I am not sure what is it trying to tell me, neither I don't know why lib32 is in the list. (It's 64bit Gentoo system). It used to work in past, but now I can't start X at all. Using my already installed driver produces Segmentation fault, X without any configuration stops on no devices found.
EDIT: Alright, I just discovered that fglrx driver does not support higher versions of X.org than 7.6, and I have 1.10.0.901 version installed. EDIT2: Actually, later I found out that my Xorg is supported by that driver, so I think it was the mess in packages&Xorg configuration which caused it. Nevermind...
View 1 Replies
View Related
Sep 17, 2010
While i'm installing few rpm packages using yum i got missing dependency error. So how can i clear that error and how install successfullly.
View 3 Replies
View Related
Jun 5, 2010
I have acer laptop with ATI Mobility Radeon HD 5470 graphics card. I have downloaded ATI Radeon 5xxx driver from ati official site. When I ran it using the command below, it gives me the following error
command:
Error:
Removing temporary directory: fglrx-install.OiFpw4
View 14 Replies
View Related
Mar 22, 2011
I recently installed my redhat 6.0 and there was no internet connection so i read some threads that guided me to try and detect my network card which detected nothing. I then went ahead to download ethernet realtek ethernet gigabyte card driver for my version of linux. I untar the file and i got the directory r8168-x.x.xxx.xx, a README file so i read the README file and it asked me to run ./autorun.sh which i did but i got the following error:
View 14 Replies
View Related
Mar 17, 2010
The relevant details of my setup are:
Samsung R522 laptop
Realtek RTL8192E wireless network controller (PCI)
Fedora 12, kernel 2.6.32.9-70.fc12.i686 (automatically updated using software update)
My problem is that my wireless card has never worked - basically there aren't any widely available linux drivers, and there are many threads on getting the RTL8192E to work on many different forums, e.g. here, but none specifically for Fedora, so I think that this thread could potentially guide many more users. FYI, my hardwired network connection works perfectly.
Fantastically however, by emailing Realtek support, they'll send you their Linux driver, which most people have claimed works perfectly (although why they haven't just put it on their website is beyond me). SO, I've got a Linux driver for my wireless card. When Realtek emailed me to send me the driver, they said to just 'cd' into the driver directory, then do
su
make clean
make
make install
reboot
./wlan0up or ./wlan1up
OK, so I tried to do this and get the following error:
make: *** /lib/modules/2.6.32.9-70.fc12.i686/build: No such file or directory. Stop.
make: *** [all] Error 2
I don't know enough about linux to understand this error. I really don't want to have to recompile my kernel, and I hope there is some way to install this driver with not too much hassle. How to overcome this error, and install my wireless driver so I can get wireless network access on my Fedora 12 operating system. I've found Fedora 12 really easy to use so far, but this is proving quite hard!
This is the output of 'ls -lh' in the folder which seems to be causing the error, namely /lib/modules/2.6.32.9-70.fc12.i686/
total 3.1M
lrwxrwxrwx 1 root root 46 2010-03-16 22:53 build -> ../../../usr/src/kernels/2.6.32.9-70.fc12.i686
drwxr-xr-x 2 root root 4.0K 2010-03-03 05:28 extra
drwxr-xr-x 11 root root 4.0K 2010-03-16 22:53 kernel
-rw-r--r-- 1 root root 498K 2010-03-16 22:53 modules.alias .....
View 7 Replies
View Related
Apr 28, 2010
I revived my old desktop (failed psu), and installed debian squeeze using netinst. It has a nvidia geForce 7600GT card. The driver in squeeze does not work very well, so I downloaded nvidia driver-installer. When I run it, it comes back with an error saying the kernel (I assume the nvidia graphics kernel) is compiled with gcc4.3, but the system is using gcc4.4. Using synaptic manager, I installed gcc3.3, but same error.
Next I tried to uninstall gcc4.4 and it gave a warning the system might not be usable. I did not understand it, but I went ahead and uninstalled gcc4.4 and guess what, the system is not usable, and I have to re-install squeeze. Not a big loss, since I do not have much in it. How to install this nvidia driver, specifically, how do I get switch to gcc4.3 from gcc4.3? Also, the squeeze install gave me 2.6.33-trunk-amd64, and 2.6.33-3-amd64. How do I get rid of ...trunk-amd64? Do I just delete it from grub?
View 10 Replies
View Related
Jul 28, 2010
Each time I try to run my Windows virtual box, I got this error: Quote: Kernel driver not installed (rc=-190
The VirtualBox Linux kernel driver (vboxdrv) is either not loaded or there is a permission problem with /dev/vboxdrv. Please reinstall the kernel module by executing '/etc/init.d/vboxdrv setup'
as root. Users of Ubuntu, Fedora or Mandriva should install the DKMS package first. This package keeps track of Linux kernel changes and recompiles the vboxdrv kernel module if necessary. Which is fine, so I run sudo /etc/init.d/vboxdrv setup as requested and then it works. But I have to do this EVERY TIME I use Virtual box. This step takes a minute or two to do its thing, so it's quite time consuming.
View 3 Replies
View Related
Nov 6, 2010
I have completed building gazebo, and everything was done successfully according to the following link [URL]... bot_Simulation , but when I tried to invoke gazebo using the command "gazebo /usr/local/share/gazebo/worlds/pioneer2dx.world" it returns the following error
[code]...
View 1 Replies
View Related
Apr 13, 2011
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
View 9 Replies
View Related
Apr 19, 2011
I'm trying to install the rt2870 driver on my server running Ubuntu Server 8.04. I've installed build-essential, checkinstall, cvs, subversion, git-core, mercurial... After uncompressing the tarball, doing a "sudo make" gives me this output:
[Code]...
View 9 Replies
View Related
Feb 24, 2011
I find that I can't compile alsa-driver 1.0.24 OR 1.0.23 under Fedora 14.
Compiling alsa-driver 1.0.24 fails with:
make[1]: Entering directory `/usr/src/kernels/2.6.35.11-83.fc14.x86_64'
CC [M] /home/Extra/Emerg/Download/alsa-driver-1.0.24/acore/hrtimer.o
In file included from /home/Extra/Emerg/Download/alsa-driver-1.0.24/acore/hrtimer.c:1:0:
[Code]....
View 8 Replies
View Related
Oct 4, 2010
I'm trying to install a driver for a Jetway ADPE4S Daughterboard on Ubuntu 10.04 but coming up against some problems. When I use 'make', I get this error: make ARCH=x86_64 CC=cc LD=ld CROSS_COMPILE= V= -C /usr/src/linux-source-2.6.32 M=`pwd` modules make[1]: Entering directory `/usr/src/linux-source-2.6.32'
ERROR: Kernel configuration is invalid. include/linux/autoconf.h or include/config/auto.conf are missing. Run 'make oldconfig && make prepare' on kernel src to fix it. make[1]: *** No rule to make target `code'. Stop. make[1]: Leaving directory `/usr/src/linux-source-2.6.32' make: *** [all] Error 2
Not knowing what to do, I've been playing around with it, and copied the files autoconf.h and auto.conf from a folder '/usr/src/linux-headers-2.6.32-25-generic', but that didn't help, it still says "No rule to make target `code'. Stop."
View 9 Replies
View Related
May 27, 2010
I am running Ubuntu 9.04 and I would like to update the jfstools to 1.1.4. Apt-get tells me that 1.1.2 is the latest available, but there is 1.1.4 code HERE.I am not overly comfortable compiling and installing, although I have done that many times. This time, I am unsure about the installation path:Quote:
Installation Names
By default, `make install' installs the package's commands under `/usr/local/bin', include files under `/usr/local/include', etc. You can specify an installation prefix other than `/usr/local' by giving
[code]....
View 2 Replies
View Related
Nov 5, 2015
I have Jessie, gcc -v shows gcc version 4.9.2 (Debian 4.9.2-10). I downloaded the proper driver for my Dlink DWA-171 wireless-n adapter from here: [URL] ....
However, when I try to build the module this is what I get:
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/3.16.0-4-686-pae/build M=/home/chris/Documents/USB WiFi Driver/rtl8812AU_8821AU_linux modules
make[1]: Entering directory '/usr/src/linux-headers-3.16.0-4-686-pae'
Makefile:10: *** mixed implicit and normal rules: deprecated syntax
make[1]: Entering directory `/usr/src/linux-headers-3.16.0-4-686-pae'
[Code] ....
I soft linked gcc to gcc ver 4.8 and then I get the same error except it says:
make ARCH=i386 CROSS_COMPILE= -C /lib/modules/3.16.0-4-686-pae/build M=/home/chris/Documents/USB WiFi Driver/rtl8812AU_8821AU_linux modules
make[1]: Entering directory '/usr/src/linux-headers-3.16.0-4-686-pae'
Makefile:10: *** mixed implicit and normal rules: deprecated syntax
make[1]: Entering directory `/usr/src/linux-headers-3.16.0-4-686-pae'
[Code] ....
I successfully built this module on Kubuntu 14.1 with kernel version 3.16 but for whatever reason it won't build on Debian.
View 7 Replies
View Related
Oct 2, 2010
I have a old laptop Dell C600 PIII 800mhz 256mb RAM 20Gb HDD and a floppy drive. It has 1 USB port and no wifi card.
I bought the Belkin F6D4050 v1 usb wireless adapter so that I could use it on the above laptop and connect to my wireless network at home. The Belkin USB wireless adapter has a Ralink xchipset
There was no specific Linux driver available but a workaround for an old driver worked. Some changes to the code and compiling gets the wireless adapter to work.
I have installed Arch on the laptop. I compiled it and its working fine
Questions 1.Arch linux releases new image only once or twice a year I have downloaded the latest available arch image and built froms scratch. When I update Arch (as it is a rolling release) the kernel also gets updated and the compiled driver fails to work. I have to recompile again for the new kernel. Is there a way I can compile this driver in the existing Arch or any other distro kernel and use as long as I can without updating so I do not have to recompile again
View 1 Replies
View Related
May 26, 2010
I am currently having an issue installing the FGLRX driver in slackware 13.1. I use a customer kernel due to buggy acpi on my toshiba laptop. The steps i took to compile my kernel are as followed. hu
make mrproper in /usr/src/linux directory
patch /usr/src/linux directory
copy kernel config from /boot directory
make menguconfig and load config
the make all
make modules install
i have also tried make install as well
then i mopy system.map the kernel file and config file into /boot directory
edit lilo
reboot ... everything works fine acpi works properly like before.. now the problem comes.. I try to install the fglrx drivers and i get the error message
Code:
Error:
kernel includes at /lib/modules/2.6.33.4-smp/build/include do not match current kernel.
they are versioned as ""
instead of "2.6.33.4-smp".
you might need to adjust your symlinks:
- /usr/include
- /usr/src/linux
ERROR: I don't have make module
Am I doing something wrong setting up my kernel. Issue on my gentoo box I have.
View 6 Replies
View Related
Jan 30, 2011
I had a working ubuntu 10.10 system two days ago with kernel 2.6.35-24. I have a gtx 460 card so I have the driver from Jockey/Additional Drivers installed.
Two days ago update manager prompted me to install 2.6.35-25. I've never had problems updating kernels so I did. I Rebooted my machine and gdm/gnome no longer starts. I always get stuck on the tty1 screen. I did some troubleshooting and figured out that my current NVidia drivers seems to be messing it up. So I booted into my older kernel (2.6.35-24) and removed my NVidia driver.
I used these steps to switch from nvidia to nouveau:
NvidiaDriverSwitching
I can now boot into my latest kernel (2.6.35-25) but now I'm having problems trying to reinstall the nvidia drivers.
jockey sometimes doesn't list any available drivers. and when it does, it gives me an "System InstallArchive() error" when trying to install.
I tried installing nvidia-current via apt-get and I get these errors:
Code:
Setting up nvidia-current (260.19.06-0ubuntu1) ...
Removing old nvidia-current-260.19.06 DKMS files...
dkms.conf: Error! No 'DEST_MODULE_LOCATION' directive specified.
dkms.conf: Error! No 'PACKAGE_NAME' directive specified.
dkms.conf: Error! No 'PACKAGE_VERSION' directive specified.
View 7 Replies
View Related
