Fedora :: Error While Installing Wireless Driver Using Make In FC12
Mar 17, 2010
The relevant details of my setup are:
Samsung R522 laptop
Realtek RTL8192E wireless network controller (PCI)
Fedora 12, kernel 2.6.32.9-70.fc12.i686 (automatically updated using software update)
My problem is that my wireless card has never worked - basically there aren't any widely available linux drivers, and there are many threads on getting the RTL8192E to work on many different forums, e.g. here, but none specifically for Fedora, so I think that this thread could potentially guide many more users. FYI, my hardwired network connection works perfectly.
Fantastically however, by emailing Realtek support, they'll send you their Linux driver, which most people have claimed works perfectly (although why they haven't just put it on their website is beyond me). SO, I've got a Linux driver for my wireless card. When Realtek emailed me to send me the driver, they said to just 'cd' into the driver directory, then do
su
make clean
make
make install
reboot
./wlan0up or ./wlan1up
OK, so I tried to do this and get the following error:
make: *** /lib/modules/2.6.32.9-70.fc12.i686/build: No such file or directory. Stop.
make: *** [all] Error 2
I don't know enough about linux to understand this error. I really don't want to have to recompile my kernel, and I hope there is some way to install this driver with not too much hassle. How to overcome this error, and install my wireless driver so I can get wireless network access on my Fedora 12 operating system. I've found Fedora 12 really easy to use so far, but this is proving quite hard!
This is the output of 'ls -lh' in the folder which seems to be causing the error, namely /lib/modules/2.6.32.9-70.fc12.i686/
total 3.1M
lrwxrwxrwx 1 root root 46 2010-03-16 22:53 build -> ../../../usr/src/kernels/2.6.32.9-70.fc12.i686
drwxr-xr-x 2 root root 4.0K 2010-03-03 05:28 extra
drwxr-xr-x 11 root root 4.0K 2010-03-16 22:53 kernel
-rw-r--r-- 1 root root 498K 2010-03-16 22:53 modules.alias .....
View 7 Replies
ADVERTISEMENT
Mar 9, 2010
I just install FC12 after all settings are done I install nvidia driver for PAE kernel whit the command # sudo yum install kmod-nvidia-PAE after reboot the system is not able to boot again.What I can do to uninstall the driver?
View 1 Replies
View Related
Apr 13, 2011
I am relatively new to linux and am running into a problem. I just got a new laptop and need to configure/install it's wireless driver but am getting an error when running "make". The error is: make[1]: Entering directory `/lib/modules/2.6.37.1-1.2-desktop/build' make[1]: *** No rule to make target `modules'. Stop.
I have scoured these forums and know that others have the same issue (when configuring other drivers/programs). I am sorry if this post is redundant. It sounds like the Makefile is pointing to the wrong directory. I am using opensuse 11.4, have make and gcc installed. My kernel is linux-2.6.37.1-1.2 (I just re-installed the desktop kernel to make sure it was up to date). The driver I am trying to install is located here: AUR (en) - rtl8192ce.
Another forum suggests pointing somewhere in the /usr/src/linux-2.6.37.1-1.2 directory instead. Is this correct? Should I be pointing to a folder within this? I am not a programmer but any description about what I am actually putting in this directory and why would be awesome (so I can learn a bit more). Or just helping me solve the problem would be great too.
View 9 Replies
View Related
May 28, 2010
i did yum -y install akmod-nvidia and then type xconfig-nvidia on the terminal,and after logging off i confront with a blank screen,so i remove akomd-nvidia [yum remove akomd-nvidia] and also yum erase xorg-x11-drv-nouveau [yum erase xorg-x11-drv-nouveau]but still no gui,i think i should install:
yum install kmod-nvidia
xorg-x11-drv-nvidia-libs.i686
xorg-x11-drv-nvidia-libs.x86_64 [but i didn't]
so how can i have my gui back?
View 5 Replies
View Related
Apr 18, 2010
I have a tricky problem which I could soIve with a c program. I wrote one and found I didnt have gcc so I tried to install it. I was told I needed to install packages. I acknowledged and an error was generated gcc-4.4.2-7.fc12.i686 requires libgomp = 4.4.2-7.fc12 I try to install libgomp and go round again.
View 2 Replies
View Related
Oct 3, 2009
I am very new to Linux and need to install a driver for my wireless card. I am trying to install the RT3070 v2.0.1.0 driver from Ralink. I am running Fedora 2.6.29.4-167.fc11.i686.PAE. I have read the thread in the Solutions section about this driver, but unfortunately this is somewhat above my levels of comprehension, and I don't really know where to start.
Here is the output.
[chips@fedora wireless_utility]$ tar xvf RT3070_Linux_STA_v2.0.1.0.tar.bz2
tar: Record size = 8 blocks
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/2870_rtmp_init.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/action.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/ba_action.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_data.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_data_2870.c
2008_1225_RT3070_Linux_STA_v2.0.1.0/common/cmm_info.c .....
cp: cannot stat `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v2.0.1.0/RT3070STA.dat': No such file or directory
make[1]: *** [install] Error 1
make[1]: Leaving directory `/home/chips/wireless_utility/2008_1225_RT3070_Linux_STA_v2.0.1.0/os/linux'
make: *** [install] Error 2
[root@fedora 2008_1225_RT3070_Linux_STA_v2.0.1.0]#
View 14 Replies
View Related
Jun 21, 2010
How To: Uninstall/Remove Old Wireless Driver to make way for New Driver (RTL8191SE)?
Here's the new driver:
I have been having trouble with my wireless connection intermittently disconnecting and reconnecting repeatedly (sometimes every couple of seconds). I posted a thread about this here on Ubuntu Forums titled: Ubuntu 10.45 & NetworkManager Applet 8.0: Connects & Disconnects Frequently.
View 2 Replies
View Related
Jun 5, 2010
I have acer laptop with ATI Mobility Radeon HD 5470 graphics card. I have downloaded ATI Radeon 5xxx driver from ati official site. When I ran it using the command below, it gives me the following error
command:
Error:
Removing temporary directory: fglrx-install.OiFpw4
View 14 Replies
View Related
Feb 25, 2011
I am trying to install a program and it spews out an error about the .obj/matrix.o file.
The output is quoted here:
Code:
The program I was trying to install is a robot simulator which performs lots of matrix manipulation and linear system solving. I followed every step in the installation guide, except for this one:
On Ubuntu, all you need to do is install the following packages from the package manager:
libblas-dev
liblapack-dev
As shown above, I am using RHEL 6, which has different libraries with Ubuntu. I tried "yum search" and installed these libraries instead: lapack.x86_64 : Numerical linear algebra package libraries blas.x86_64 : The Basic Linear Algebra Subprograms library.
View 2 Replies
View Related
May 29, 2010
Which printer's have the best driver support on FC12
View 7 Replies
View Related
Sep 27, 2010
Having just updated various files including the kernel using Package Manager I no longer seem to have the correct version of the Nvidia graphics driver. On previous updates this has been done automatically by the "kmod Nvidia" Metapackage. My last kernel was 2.6.32.19-163 fc12.i686.PAE and the Nvidia driver for that did get downloaded correctly. Looking on Yumex I cannot see a driver for this latest kernel listed.
View 10 Replies
View Related
Feb 28, 2010
Host: CentOS 5.4 x32
Guest: FC12 x32
Virtual machine: Virtual Box (VBox) 3.1.4
The 640 x 480 video display on my FC12 guest is driving me nuts! The VBox Guest Additions are installed. How do I get FC12 to recognize the VBox video driver?
Extra information:
Auto resize works great on my Windows guests. On FC12, I just get a lot of extra white space.
FC12's installer does not detect a video card. You have to use the stand display option (second one down) to get FC12 to go into a full graphical installer. If you use the regular install, hoping to do a graphical install, FC 12 only install the bare basics. No video support. You get what looks like a rescue cd. No Gnone, no X etc.
I do believe that FC12 has no idea that the VBox's fake video adapter even exists.
View 1 Replies
View Related
Mar 11, 2010
I'm trying to install from the Live CD. I read the sticky about needing a /boot and a / partition. I think that sticky applies to me but I'm not sure; once the Live CD loads, I click the "Install to Hard Drive" icon on the desktop. It thinks for awhile but ultimately doesn't display anything.What I'm not sure about is how exactly I go about making those partitions. My current HD is a Ubuntu system (Karmic Koala), and its network slowness has prompted me to try FC12. I've backed up everything already, I don't need to preserve anything on the existing drive.
I'm looking for the easiest way to get FC12 installed. Should I fool with the partitions? I just download a different install CD i.e. a non-Live one? If so, which one? Do I need all 5 or so CD images? I don't have a DVD burner so downloading the DVD isn't an option. I'm comfortable working from a Linux command line once the system is working, but I don't have much experience "close to the metal" i.e. actually getting a system up and running.
View 1 Replies
View Related
Jun 17, 2010
The new kernel 2.6.32.14-127.fc12 is available but I can not found Nvidia driver for this on rpmfusion-nonfree-updates yet.
View 2 Replies
View Related
Mar 20, 2011
I recently upgraded to OpenSUSE 11.4 GNOME on my ancient Compaq Armada E500 (Pentium II processor w/512MB of RAM) and now I'm trying to install my wireless driver with ndiswrapper. I've done this a couple of times before, but I'm having trouble getting ndiswrapper to find my driver. The driver is located in a folder on my desktop, but when I type the command 'ndiswrapper -i home/edwin/Desktop/WPC54G_40826/LSTINDS.INF' I get a message that there is no such file or directory at ndiswrapper's location, which is usr/sbin/ndiswrapper. So how do I get ndiswrapper either to look in the directory where the file is located or get a copy of LSTINDS.INF into the usr/sbin/ directory, which must be accessed as root?
View 9 Replies
View Related
Jan 23, 2010
After installing nvidia drivers (sudo yum install kmod-nvidia), Fedora12 (kernel 2.6.31.12/5) fails to start. To be more exact, it show the 'loading screen', and then the screen gets all scrambled. Trying to switch the ttys doesn't work either (though I can boot in runlevel 3).
I know that there might be some conflicts with nouveu, but i followed the steps from 'Fedora Nvidia Driver Install Guide' (not allowed to post URLs), so I guess nouveu isn't exactly my problem(?).
Another puzzling thing about this, is that I can boot and use FC12 from VMware. No problems there. I also tried removing/reinstalling the kmod-nvidia (and everything else nvidia related), but the problem persists.
Specs: Intel core2duo t7300, nvidia 8600m gs, 2gb ram.
PS tried nvidia installer previously, and problem was the same, so I reinstalled FC12 at that time.
View 9 Replies
View Related
Feb 9, 2010
I recently upgraded from fc8. I am running two nvidia NVS 285 cards with four monitors and using nvidia driver 190.53-pkg1. I have one card up and running and can edit the config file and make to other two work I just can't get all four to work together.
View 3 Replies
View Related
Jun 11, 2010
"Dell 1525 WLAN PCIe card with11n mini-Card & external antenna" wireless card. It got recognized fine by FC12, but it was rather slow. I had read that life would be better in FC13 with the new kernel. After a long wait, I upgraded to FC13 yesterday.
It seems that the wireless is indeed faster. However, it it clearly a lot slower than under Windows 7 (it is a dual boot PC). My test is simply to play say Hulu in full screen: under Windows it looks fine, under FC13 it plays in slow motion.
View 7 Replies
View Related
Mar 21, 2010
Is it possible to have fedora 12 join a specific wireless network (my home network) before i login to the gnome enviroment on a standard install? i would like to be able to hit the machine via ssh without needing to be logged in.
View 3 Replies
View Related
Nov 9, 2010
I'm having problems getting two wlan cards to work under Networkmanager with F12. I have an old server that I wanted to move, so thought I'd get a USB wlan device for it. before setting up the server, I thought I'd try the USB (an Edimax EW-7711USn - Ralink 2870) on my laptop first. My laptop has an inbuilt ipw2200 card that works fine under NM.
So I've down loaded the DPO_RT3370_LinuxSTA_V2.4.0.1_20100831.tgz file from Ralink, and built the driver (after changing the os/linux/config.mk file for the WPA supplicant settings). I also install the rt2870 firmware (from Ralink) in the /lib/firmware directory. I also blacklisted the rt2800usb driver to ensure that that didn't get loaded.
The problem I have is that I can now get both the ipw2200 device and the rt2870 devices 'working', but they both try to assume the same IP (I want fixed IP's and not DHCP for them) - what is the way to configure the 'devices' so that the rt2870 device is always given IP x and the ipw2200 given IP y?
I think my problem is really my lack of understanding where/how NM handles the files under the GUI config. I used to semi understand how the old network config tool set up it's files and where they were etc. But with NM I'm a bit lost as to how it equates the device with the network settings. Once I have the device working with the correct driver on my laptop, I'll look to apply the same settings on the server (which is then FC13 - but should be simpler as it doesn't have an existing wlan interface).
View 1 Replies
View Related
Nov 24, 2009
i recently installed the banshee media player using yum extender. Everytime i run it i get this error " a crash in mono-core-2.4.2.3-2.fc12 has been detected" how can i fix this problem?
View 2 Replies
View Related
Jun 29, 2011
I upgrade from FC12 to FC14 on Monday last. Yesterday, I noticed that CUPS wasn't running, so I looked at services and started it manually. The services appeared to be set to start CUPS automatically, but today again it wasn't running. Looking at messages, I now have the following 'errors' that appear to be disabling CUPS due to some form of load dependency.
Message log extract:
[code]....
View 6 Replies
View Related
May 8, 2010
I am trying to install madwifi on fedora 12. I am getting following error which i "make" the project.
[code]...
View 3 Replies
View Related
Dec 30, 2009
I have installed Fedora Core 12 and all seems fine. I have also set up the main repositories as was suggested on the following fedora set up guide website: [URL]. I have since tried to update my Fedora release with all the updates available, alas I get the following error message:
Error Type: <class 'yum.Errors.RepoError'>
Error Value: Error getting repository data for installed, repository not found
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3125, in <module>
main()
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 3122, in main
backend.dispatcher(sys.argv[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 710, in dispatcher
self.dispatch_command(args[0], args[1:])
File : /usr/lib/python2.6/site-packages/packagekit/backend.py, line 657, in dispatch_command
self.update_packages(only_trusted, package_ids)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1948, in update_packages
signed = self._is_package_repo_signed(pkg)
File : /usr/share/PackageKit/helpers/yum/yumBackend.py, line 1437, in _is_package_repo_signed
repo = self.yumbase.repos.getRepo(pkg.repoid)
File : /usr/lib/python2.6/site-packages/yum/repos.py, line 121, in getRepo
'Error getting repository data for $s, repository not found' $ (repoid)
View 4 Replies
View Related
May 2, 2010
I'm having trouble installing a usb wireless adapter.
Code: # lsusb
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 003 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 002: ID 046d:c526 Logitech, Inc.
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 004 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
Bus 002 Device 004: ID 0bda:8171 Realtek Semiconductor Corp.
Bus 002 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root hub
(It came with a linux driver but not sure how to install it)
Code: /2009_1106_RT3070_Linux_STA_V2.1.1.0 (2) # ls
chips
iwpriv_usage.txt
README_STA_usb
sta
common
Makefile
RT2870STACard.dat
sta_ate_iwpriv_usage.txt
include
os
RT2870STA.dat
tools the readme just has a change log, no instructions.
View 9 Replies
View Related
Dec 30, 2009
I am on a desktop that depends on a USB wireless adapter for it's internet, and I need to install the driver for it. I have downloaded the driver via another computer and isolated the .inf, .sys, and .bin files for the driver, and am trying to install ndiswrapper in order install the driver. the problem is I cannot get ndiswrapper to install, the 'make' command pulls in a laundry list of errors along with the 'make install' command. Is there something I'm missing? I have managed to update the kernel via another computer running the latest kernel, but still receive errors.
View 8 Replies
View Related
Mar 24, 2010
It says "device not ready" ive read a lot of posts with problems that seem the same but i dont know which fix actually applies to me. im running karmic on an ppc with the b43-fwcutter driver.
View 3 Replies
View Related
Nov 30, 2010
I am using Maverick 10.10 on a Toshiba Satellite Pro L510 which has this card, full output from lshw:
[code]...
So far, I've figured out that 'Error 2' basically means any of probably a zillion or two possible errors. The line I have in bold is obviously the one. I have searched, dug, probed, but can not work out what it means or where to start fixing it. Reason I'm bothering at all is that yes, the Realtek card worked 'out of the box' but is pretty unreliable, a third and less the speed of the other machines in the house
View 9 Replies
View Related
Feb 16, 2011
I've been trying to make/compile the driver for a wireless card. The card is usb, it's titled Micronext MN-WD550M and seems to use the rtl8712 driver.Firstly, though I did this once two years ago I seem to have completely forgotten how to install a driver in ubuntu.
Secondly, I'm not sure I have the right driver anyway since in the notes in the readme it says it is for i386 (I run amd 64). The driver is here [URL] Thirdly, after clicking through various readmes and documentation without feeling any more intelligent, I then tried using ndiswrapper to install a windows driver and ubuntu would crash if the usb wireless card was plugged in. Blarg.I feel like this should be so simple I'm going to make a clean installation of ubuntu 10.10 shortly (for various unrelated reasons) so anything I messed up with ndiswrapper should be back to normal.
View 1 Replies
View Related
Jul 4, 2010
my problem is on installing nvidia driver on fc12 32bit but, first of all, as i understood the pae kernel requires more than 4gb of ram,i have a 2.2 ghz cpu with 2 gb ram,but when i run command:uname -r it answers: 2.6.31.5-127.PAE [i have fc12 32 bit] when we try to download linux we have a 32bit edition or 64bit edition,do we have an edition which is only for pae? or when we install for example the 32bit edition on a computer with more than 4gb of ram then the kernel automatically will change to be a pae kernel??
View 10 Replies
View Related