I downloaded the vnc 4.1 on my linux computer which is running Ubuntu I'm not sure how to view it on a windows computer. I really have no idea what i'm doing so can anyone that answers please add as much detail as possible.
View 3 Repliesso here's my problem. I am trying to install windows xp on my computer in virtual machine so i can watch netflix on my computer. The disk will not start up, if I restart and try to boot from load i just sits there and says boot from cd. The disk drive plays music cd's fine, so i dont really know what the issue is.
I dont know that much aboutut ubuntu. a tech friend put it on hard drive he gave me after mine crashed. also i should ad that i took the disk to someone else's house that haswidnows installed and the disk worked just fine, so its not a disk problem
1. How can I stream music from my ubuntu computer (9.10) to my windows computer using vlc?
2. What nvidia driver should I use? The one found in "hardware drivers" is 185 but nvidia's site has 190! which one should I use?
I have a situation where I am trying to move some data from a Linux computer to a Windows computer. In all there is 700GB of data to move in about 1.5 million files, so I don't want to do this over the network.My first thought was to use an external USB hard drive and create an NTFS partition and copy the files from the linux computer to mount on the Windows computer. After 4 days of copying without completion I abandoned that idea. I thought the NTFS might be slowing it down, so I created an EXT3 partition. 4 Days later it was still copying. I did some calculations and there was no way the USB 2.0 connection was that slow. I then used ddrescue and cloned the drive to be copied overnight and it took about 12 hours. i was able to mount the USB drive under Linux and access the files appropriately. The only problem is that I can not access that USB drive on my Windows 7 computer. I have tried Explore2fs, DiskInternals Linux Reader, and Ext2 Installable File System For Windows, but none of them is recognizing the external drive.
View 5 Replies View RelatedI set up a dhcp server in the lan and assigned static ips to two computers, computer A and B, according to their mac address. Everything was running fine. But when I turned off computer A, connected computer C to the network, and assigned computer A's static ip to computer C without changing dhcp setting. Computer C was able to access the internet. When I turned on computer A, dhcp couldn't assign an ip address to it, and computer C showed an error message of ip conflict and failed to use internet. I wonder if dhcp server is able to prevent other computer from using the same static ip that is already assigned to a computer according to its mac address.
View 5 Replies View RelatedMy wifes networked computer connected to the network just fine when it was Win XP. Now that Ive converted it to 10.04 (completely) it can see the network, but it just wont connect to it. I had no problem converting my computer to Ubuntu and it sees the network and accesses it great. Files, folders and hard drives are all shared. So, one computer connects great, the other does not.**I dont know what to do at this point.Here is the layout:My Comp (10.04) ---------......Main Network Comp (XP)Wife Comp (10.04) -------/The main network computer is XP as it has software on it we need that does not work in Wine. The main computer will have to stay XP. I cannot get my wifes computer to connect to the main system, although mine connects just fine. I dont know what the problem is. Her computer sees the network, but when trying to connect, it times out and says unable to connect.
View 2 Replies View RelatedI have two Linux computers and one small home router with DHCP functionality. I configured the router with the "dynamic DHCP" setting, ie, the static DHCP with MAC-Address was not used. Before that, I used the manual IP configuration, defining the two computers' names in the /etc/hosts file.
Example:
10.0.0.2 comp2
10.0.0.3 comp3
Now, with DHCP, the above example is no longer appropriate, because the DHCP server is supposed to tell the computer what IP number it will receive. However, I am missing something, because I haven't figured it out yet how to make one computer know the other computer's name. Is it that I haven't installed a name-finding package? Is there a simple way to accomplish this (one computer finding the other computers' names)?
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View Relatedi want to find ip address of other computer which are connected in LAN..suppose ther are 5 compter in LAN and i want to find ip of all remaining 4 computer using my computer only in command or any other way is ther....
View 4 Replies View RelatedI have Ubuntu 9.10 setup on a test box. I am able to connect to my Win XP box shares but I cannot connect to my Win 7 (64 bit) box I get the usual 'Unable to mount location'. I can get to the Win 7 share from my other Win box so it is a valid share. I also cannot connect via the Remote desktop viewer. I am afraid that if I cannot get this going my Ubuntu experiment i over before it started.
View 2 Replies View RelatedI recently decided to install Samba in Ubuntu as a home file-sharing server. However, when I try to access this computer from another (using Windows 7), an error messages comes up. It says: "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The specified domain either does not exist or could not be contacted."
And I'm currently working on a new CentOS 5 install I've made on a computer I've got.. So I'm now trying to get that computer to reach my home network through one of my other computers, which have got XP installed. I've configured the XP computer to act as a gateway from one network card to another, and It works with another XP pc, but no luck with my CentOS 5. I used this link [URL] And I configured the correct network card.
So.. the IP of the XP machine is 192.168.1.70, which I have set as a static. So that the CentOS will find it. And I've connected the (fully working) network cable correctly.
What do I have to do?
I have configured the CentOS to recieve an IP dynamically. (dhcp).. Might that be the problem? (well.. one of the problems.. I've tried to set it to static.. ...?)
Is there more to it than this? I mean when I'm working on communication through an XP machine... ?
I have Fedora 14 server with installed cups, samba and shared printer. I am trying to print from Windows Vista computer. Printer is available via network, test page is printing as well as any text document. The problem is in printing of dvi and pdf files only. In this case, Windows sends printing task but the printer does not response. How can I fix this?
View 2 Replies View RelatedSo, I'm trying to set up a network with my windows netbook so the Ubuntu comp can access the internet through the netbook's wireless. Finally got the network set up, but can't access the internet on the Ubuntu comp. Also, the Ubuntu machine can recognize and access the files on the netbook, but the netbook only sees a computer named Owner-a6012abd6 which asks for a password.
The netbook is running Windows XP SP3, with an Atheros AR9285 Wireless Network adapter(internet) and an Atheros AR8132 PCI-E Fast Ethernet Controller. The Ubuntu comp is running Ubuntu 9.04.
I have just installed Ubuntu 10.4 LTS and would like to share this computer on my windows network. I understand that Samba is the way to go, but how do I configure linux with Samba so I can share files and printers? I am able to see my windows computers (vista and xp) but I am not able to see the linux computer with those machines plus I would like to change the network name of the linux machine if possible. Please any help and information will be much appreciated. Eventually I would like to server a printer from this linux machine to the other windows machines.
View 6 Replies View RelatedWindows 7 computer can't see ubuntu 10.04 computer. Ubuntu machine can see and access rest of windows network including a linux enabled PVR. Tried various things to no avail.When setting up for shared folders I got a message that I needed to install shared services. I did this but I only have one share through option: Unix networks (NFS). The samba option, which I should be using is not available. I tried to allow "Share files over the network" but had to install some extra service. While "share files over the network" can and has been enabled, accessing the windows network has become painfully slow and my windows 7 machine still can't see the linux box
View 1 Replies View RelatedI have serious issues with sharing the HDD drives physically on Linux machine 10.10 in my living room, with the windows 7 computer in my room, connected with wifi.
/etc/samba/smb.conf
Quote:
[MP3]
path = /media/MP3
writeable = yes
browseable = yes
[Code].....
I have a very simple network of two computers. One is running ubuntu (Maverick) and the other running Windows (Vista).The two computers are networked satisfactorily but I wish to control the Vista computer from the ubuntu one.I have tried running UltraVNC on the Vista computer and the default VNC from ubuntu. However neither computer can see the other using VNC.
View 8 Replies View Relatedcannot connect to my window computer using open SuSe
I am attempting to connect to my Windows Computer via a wired network on a sky router. When I tried with PClinuxOS it configured automatically. With the latest version of open SuSe 13.1this is quite a bit different. I have got as far as the network being auto and active with an Icon showing on the taskbar. However when I click on the Windows network Icon SuSe tyies to locate my Computer but then comes back with " failed to reteive share list from server. This is as far as I can get after several hours of trying.
I have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
Was trying out Fedora 15 but could figure out something: How do I share a folder?
When doing some Googling all I could find were forum posts on how to manually configure samba with smb.conf (a place I refuse to go, its 2011 people), and gnome-user-share which only shares ~/Public and doesn't show up on my Windows computer.
I do know that at least in Ubuntu 10.10 with Gnome 2 all I had to do was right click on a folder at click Sharing. I'm looking for similar ease of use in Fedora.
I am trying to create a Samba share on Ubuntu so that I can see it on my Windows computer but have had nothing but trouble. I've tried everything that I could find in Google but the best I can get is that my Ubuntu computer shows up as Unknown device on my Windows computer. Unfortunately, my Windows computer belongs to my company or I would just switch to Ubuntu altogether. I have posted a couple of screenshots of what I see in Windows, my GParted partitions, and the options that I have enabled for the folder I am trying to share. Below are my fstab and my samba files from Ubuntu. I am sure that this is just some rookie mistake as I am new to Ubuntu. It certainly seems that this should be easy, but I just can't get it.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]...
I just got my Ubuntu 10.10 laptop to finally be able to access my Windows 7 Professional's shares, and I'd like to share how I got it working. Whenever I would go to Places > Network on Ubuntu, and then double click on my Windows computer (sometimes after finding it in Windows Network > {workgroup name}), it would immediately bring up a box saying "Password required for {computer name}". My Windows password wouldn't work here, but I didn't even want to be asked for a password. In Windows, under Network and Sharing Center > Choose homegroup and sharing options > Change advanced sharing settings..., Turn off password protected sharing was already selected.
So, I eventually found out that samba (the program Linux uses to talk with Microsoft's SMB network share protocol) has a bug of sorts. The format of the SMB packets coming from a clean Windows 7 is known by samba. However, if you install Windows Live Sign-In Assistant (which is provided through Microsoft Update) on Windows 7, the packets coming from Windows 7 are modified, and samba can not handle this. A patch has been written for samba, but Ubuntu's repositories (which has samba version 2:3.5.4~dfsg-1ubuntu8.1) does not yet have that patch.
Also, it seems Microsoft has stopped Windows Live Sign-In Assistant from appearing in Programs and Features. It doesn't appear even if you specifically download and install it separately. I did, however, notice that the installer calls itself Windows Live Essentials 2011. So I found that in Programs and Features, and uninstalled it. It asked which components I wanted to uninstall, and I selected all of them. Rebooted Windows, and now I can access the share no problem. I also grabbed the offending packet using Wireshark before and after that uninstall. The packet is indeed different. Specifically, without Windows Live Essentials 2011, there is no mechToken in the packet.
The current version of samba available is 3.5.6. I may try downloading and compiling that later, and see if it deals with the change that Windows Live Essentials 2011 makes OK. Also, it may be possible to get the share working without uninstalling every single Windows Live Essentials 2011 component. You may want to try that if you would like to keep a component.
A friend came by, and we tried to log her on to our wifi network when she was having trouble accessing it with her Windows (Dist #) machine.he wifi network itself was set up with macs, and had standard, open settings as far as I could tell - no password, NETGEAR title of the network.The Windows computer prompted us for a Security Pin, which we gave it from the router, and then all of the computers already on the network got dropped, while the Windows machine got set up onto the wifi, renamed the network with its own username, and automatically set up a password.I'm currently on the network using LAN, but can't figure out how to set up the network through Ubuntu back to the original settings for the rest of the people that need to access the network.Specs:I'm running Ubuntu 11.0,The Windows machine is unknown right now. I'll repost if that will help.The wifi router is a Netgear Wireless N 150 WSR 1000, with the serial, mac, and security pin numbers.
View 2 Replies View RelatedWhen running findsmb in my local workgroup network, the script only lists computer running Samba under Ubuntu. The rest of the computers, which are running Windows 7 are not listed. As I understand, and I may be wrong, Windows 7 computers no longer support workgroups.However, Smb4K, which to my understanding uses the same Samba libraries as findsmb, does list all computers on the network, including the ones running Windows 7.I am looking for a similar CLI tool that shows all computers on the network.
View 1 Replies View RelatedI'm on Windows 7 64bit and Ubuntu 11.04 64bit.Windows is on a net book with not so much hard drive space so I want to keep all my music and movies on my hard drive of my Ubuntu desktop. When I try to find my Ubuntu machine I get nothing though..No matter what though, Win7 simply will not see it on the network. Not even when I run "\ipadress"..If anything is there away to delete everything related to Samba and start over?
View 3 Replies View Relatedhow to configure rdesktop to connect to a Windows (XP/2003) computer, but going through a Terminal Services Gateway or connecting to a Terminal Services Server through TLS/SSL? The command line options or any on-line documentation I was able to find, omits this entirely. Using the Windows Remote Desktop Client (RDP6) you can configure Terminal Services Gateway connections from the Advanced Tab. I suspect that rdesktop, gnome-rdp, tsclient et el can't do this yet as they support up to RDP5. Currently I am using a WinXP VM to accomplish this, but would like to do this natively on my Linux box.
View 3 Replies View RelatedI currently have my server setup with a web page and ssh. I am looking to find a way to access the internet from my work computer, but all proxies that I can find have been blacklisted...I can however access my home server webpage. Is it possible to create my own proxy so I can surf from my work laptop?
View 2 Replies View RelatedI wish to write a python code so that I can access a file on a windows computer on the network. I know the IP, Computer Name, Workgroup, username,password and any other neccesary detail of the computer. I also have the access to the computer to intall any software I may need to install on the said windows computer.
Kindly guide me so that I may access the files. The files are in a folder shared over the network but not on the windows drive of the computer.
I am able to access the files using gui (ubuntu 11.04).
My network comprises three PC's .... Windows XP, Windows 98SE and Ubuntu 9.04 running SAMBA. All PC's are configured WORKGROUP=WORKGROUP. The network connection To/From XP/UBUNTU via SAMBA Shares works perfectly OK. However, despite scouring all forum information regarding changes to Win98 ENCRYPTION, (Registry change re: DWORD "EnablePlainTextPasswords"), the Win98 PC refuses to connect to UBUNTU. The UBUNTU PC can conect to all the Win98 shared folders OK. I have disabled my Linux Firewall (Firestarter), I have run SMBCLIENT to check the user password for Win98 and it is validated OK. The Win98 error message is ....
"\Inspiron 510m is not accessible. The computer or sharename could not be found. Make Sure you typed it correctly and try again."
My samba.conf file is as follows ..... Any help or assistance PLEASE !
#======================= Global Settings =======================
[global]
## Browsing/Identification ###
# Change this to the workgroup/NT-domain name your Samba server will part of
workgroup = workgroup
# server string is the equivalent of the NT Description field
code....