I have Fedora 14 server with installed cups, samba and shared printer. I am trying to print from Windows Vista computer. Printer is available via network, test page is printing as well as any text document. The problem is in printing of dvi and pdf files only. In this case, Windows sends printing task but the printer does not response. How can I fix this?
View 2 RepliesI am trying to figure out how to make my computer use my network in order to print thru. Another PC, (running windows vista) I know that the printer works, that I can print from another computer (because I have done it using windows XP) but I can't figure out how to print with fedora over my network.
View 9 Replies View RelatedI'm running Mint 9 as my main network and my wifes Acer Aspire 5610 running Windows vista. My problem is that I can't print from vista. It prints a test page just fine but when I tell it to actually print a document, the status says: "Access denied, unable to connect" I have 2 printers connected and they installed fine in Vista one is a HP LaserJet 2100 series and the other is an HP Photosmart C5280. Like i said, they both print the teat page just fine.
View 9 Replies View RelatedI'm using Slackware64 13.0 on a laptop. I've set up the network printer which lives on a Windows Vista machine (not my choice) in the family room. I am able to send print jobs to the printer. That part works fine, but the printer does not print. It simply stacks up print jobs with "error - printing" in the status of the first print job.I think I understand what's happening. I'm sending the print jobs to the print server as "Guest" and I have no guest account activated on the vista machine. I'm sitting here racking my brain (ie googling my goddamn fingers into stumps) trying to figure out how to send the jobs to the print server as indubitableness.
For the goddamn life of me I can't figure out what I need to do to send these print jobs as a specific user. I've tried adding "valid users = indubitableness" to smb.conf and I've tried using the -U flag when running lpadmin to add the printer to my system in the first place.The configuration wizard for windows doesn't appear to have any options to enable guest access or to add a specific remote location and/or user to the allow list.I'm at a loss and I'm losing my goddamn mind.
I have a laptop running linux and a computer running windows 7, I would like to be able to send print jobs from my laptop using linux and not have to be physically plugged in. I tried adding the printer through samba and it doesn't work.
the specs are as follows:
[URL]
the message i got was idle unable to connect to cifs host will retry later. linux gave me two drivers and i have tried both previously, the print job seems to get lost in space.
I recently upgraded to win7 (home premium 64bit) from win vista and everything went well. But when i was installing ubuntu i noticed that win vista was taking up part of the C drive (like 10 gigs!) (i saw this in the part of the instalation where you set the ubuntu partition.) SO anyway i was wondering if anyone knew a way to completely get rid of the vista kernel and free up that space its taking up.
View 7 Replies View Relatedi have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
View 7 Replies View RelatedI have installed Samba on my one of my computers that has Fedora 12 installed 192.168.1.2, and the other PC that has Windows Vista installed 192.168.1.3 Hostname Adam-PC Network: WORKGROUP. Both PCs are connected to Wireless Netgear Router with DHCP enabled on the router as well as the two computers. How do I set up File sharing on these two systems?
View 2 Replies View Relatedmy 64 bit XP/fedora 12 box prints fine to a shared printer when I am in XP. The HP color lasterjet CP1215 printer is hosted by a 32 bit vista machine. I can located the printer on the network from Fedora 12 using the add a pinter utility, but I cannot print. I get no error message on the linux machine, but the "submitted " dialog box never goes away (not sure if it is supposed to go away). On the vista machine in the printers dialog box it says "remote downlevel document" in the document name section and "0kb" in the size section, then goes away. the printer does not make any noise.
View 3 Replies View RelatedI am trying to set up printing on my Fedora 14 laptop, on my home network.
Details:
- Home network, single subnet, the desktops are connected to the switch portion of my Linksys via Ethernet and all have static addresses. Name resolution between them is via hosts file entries. The router is running wireless (WPA2/AES/DHCP) to accommodate my laptop which is dual boot XP Pro and Linux Fedora 14.
- The printer is an HP Deskjet F4180 printer. It is attached via USB to a Windows XP Pro box and shared. The XP box is wired and static ip.
- I am able to see all the shares and print to the shared printer from any of the Windows boxes, wired and wireless, including my laptop when I run Windows on it.
- My Fedora 14 is working fine on wireless, using Network Manager and KDE desktop. I am able to access all the Windows shares on both of my wired desktops. One desktop is XP Pro, the other is Windows 7.
This is what happens when I try to set up printing on Fedora:
- I go to Administration / Printing and click to Add a Printer.
- I am prompted for the root password twice, which I put in.
- I select Network Printer / Windows printer via samba and click on Browse...
- It finds my WORKGROOUP and machine name mig29 and prompts for user ID and password which I type in.
[code]....
the user ID and logon on Fedora is different from the one on Windows. During setup I am prompted for credentials. It seems to me that somewhere down the line Fedora supplies not the credentials I supply but my local user ID and password and it obviously fails.
I recently bought a new Netgear WNDR3300 Wireless-N router, and cannot seem to see the linux box in my windows network. (We have multiple Windows machines on my network, all in the same workgroup.) I also recently bought Avast anti-virus, and I think I have enabled the IP range of all computers to enable communication. I wonder if a media router has different needs than just the regular router I used to use. My samba file is minimal, I will post an example. I wish my Windows computer to access a drive marked /terminal on my linux box. I have a drive on my Windows marked E:Cher on my Vista box. My workgroup name is BRCR.
View 3 Replies View RelatedI have tried many distros and get the same message faulty hard drive SATA the computer was running Windows Vista just fine. I changed the Bios for SATA to be ATA instead of ACHI..
View 1 Replies View RelatedI have a Verizon Droid Eris, an Android phone that has not yet been rooted. Due to the lack of root capabilities the only way to tether my phone is through PDANet for Android. Unfortunately there is no Linux version of PDANet, so the only computer I can tether my phone with is my laptop which is running Vista.
I also have a desktop running Koala, which is ultimately the computer I want to get connected. I'm hoping that there is some way I can use Internet Connection Sharing on the laptop to accomplish my goal, but I haven't had much luck so far. I don't have a crossover cable either so I would prefer to connect the laptop and the desktop via my Belkin F5D7230-4 wireless router.
trying to install F14 on a computer that has Vista on it. I chose the option for it to shrink my existing partition since it takes up the whole hard drive. On the next screen I choose my install drive... then it asks me (dont remember verbatim) by how much do I want to shrink the current partition? I put 200 (I assume its GB... is it MB?) and then it said shrink failed and then takes me back. Is that question on how much I want to shrink have to do with how much space I'm putting on the new F14 partition or how much I'm leaving on the windows partition?
View 6 Replies View RelatedWill I be able to have a partition on my computer to run Windows Vista and Ubuntu side-by-side?
View 2 Replies View RelatedWas trying out Fedora 15 but could figure out something: How do I share a folder?
When doing some Googling all I could find were forum posts on how to manually configure samba with smb.conf (a place I refuse to go, its 2011 people), and gnome-user-share which only shares ~/Public and doesn't show up on my Windows computer.
I do know that at least in Ubuntu 10.10 with Gnome 2 all I had to do was right click on a folder at click Sharing. I'm looking for similar ease of use in Fedora.
I downloaded the vnc 4.1 on my linux computer which is running Ubuntu I'm not sure how to view it on a windows computer. I really have no idea what i'm doing so can anyone that answers please add as much detail as possible.
View 3 Replies View RelatedI have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
View 2 Replies View RelatedBottom line: I was able to print to a network printer before. Now I can't. I can print from my Vista partition, but not from 11.04.
Level of Linux experience: Like listening to a conversation between a Brit and an American.
Details:
(1) HardwareDual boot on Dell Inspiron 530 (11.04 and Vista)iomega print server GPSU21hp Office Jet 5610 All-in-One(2) Test page: pdf file from a usb drive; other test pages produce same results
Installation of network printer:
I followed what I believe to be standard procedure: Using the Unity interface, I opened up the Printing application. I then clicked "Add". Then "Network Printer", then "Find Network Printer". I typed in the Host (192.168.1.6; static assignment made while in Vista via iomega's software). Then it searches. It fills in its own blanks thus: Under the heading "Devices" > "Network Printer" it says, "JetDirect (192.168.1.6) (192.168.1.6)". In the panel on the right it says, "Host: 192.168.1.6:631/ipp", then, "Queue: ipp". I click "Verify..." and an error message pops up that says, "Inaccessible The print share is not accessible"
If I proceed forward, I can install drivers, but nothing will ever print. Following procedure, I click to print a test page. The job is sent to the queue and then I get this Printer State message: "Stopped - Destination printer does not exist!"
I'm trying to print a PDF from Windows through CUPS. I'm guessing it is supposed to appear somewhere on my Ubuntu machine, but I cannot find any files. When I go on the CUPS server and look at "completed jobs", it shows every print that I did, but I have no idea where the file is located.It is not in my Home directory.
View 3 Replies View RelatedI setup shares on a fresh install of Ubuntu 9.10 via the shared folders application from here: [URL]. The shares are visible on my vista laptop but when I go to open them I get an error "you might not have permission to use this network resource". I set the smbpswd to nothing via the method in the above article as well and my /etc/samba/smd.conf has the follow lines:
[300]
path = /media/Secondary Storage
available = yes
browsable = yes
public = yes
writable = no
[500]
path = /media/New Volume
available = yes
browsable = yes
public = yes
writable = no
I am having an issue setting up (or rather accessing) a samba share, I have installed samba and created a share a follows:
Quote:
[smbshare]
comment = 1TB Drive Share
path = /media/1TB EXT eSATA/SMBshare
browsable = yes
read only = no
I then added a user to the server using:
Quote:
sudo useradd smbuser --shell /bin/false
and then added this to the smbuser list with:
Quote:
sudo smbpasswd -a smbuser
So everything seems to work fine here, I can see the server from my windows vista laptop, open the server and see the shared folder, but when I try to open the folder I enter username 'smbuser' and password 'xxxxxx' and get a windows error saying "not accessible you might not have permission to use this service"I have even tried to set this up as a public share with full guest privileges and get the same error.
I've been wondering how to see files stored in a ubuntu 10.04 machine while working in a windows vista one in a local network. the most I have gotten is to connect the vista machine to the ubuntu network but i have to copy the files to the windows computer to watch them in that computer.
View 1 Replies View RelatedI have a problem on my LAN, then: I have a laptop on which Windows Vista is installed, and every time I try to do ping to my server centos, my centos server does not respond to ping. The server is operating normally, because I found other PCs on my network that communicate normally with my centos server.
View 1 Replies View RelatedMy question is that i have a laptop with windows vista on it and my main box ubuntu 10.04.
I know there is a way to set up the printer on the vista laptop to print through my box.
I remember part of it, something like :640/my printers/linux printer/hp?
Also how do i set up the linux box to allow the vista machine see the printer?
I'm giving up in ever hoping that I'll get printing working with windows 7 with the strange comments I've found on the net. Basically I have a samsung ML2240 printer shared on the network, everything can print to it fine except for my windows 7 laptop. It's shared via Samba.
Quote:
Once you have extracted the driver files, copy the 32-bit drivers to the /usr/share/cups/drivers directory and the 64-bit drivers to the /usr/share/cups/drivers/x64 directory exactly as named below:
[Windows 2000 and higher]
ps5ui.dll
pscript.hlp
pscript.ntf
pscript5.dll
However after checking this, I dont have the files named within int he correct folder on my windows system :
%WINDIR%SYSTEM32SPOOLDRIVERSX643 folder for 64-bit drivers.I've tried installing the printer via the windows installer, however this adds the driver then tells me its not working and fails to print. I really dont know where to turn with this one. I've tried installing the samsung supplied drivers from the website. However they still fail to connect.
Ubuntu and am dual booting it with Vista and I want to be able to access all my files from Vista whilst running Ubuntu. When I go on places, network, and click on windows network, I get a message saying 'Unable to mount location: failed to retrieve share list from server'.
View 3 Replies View Relatedhow this is pulled off - when you click "Print" on a computer, and the result comes out of a printer connected to some other computer on a LAN, what goes on? I would like to know this at the deep *hacker* level, and also how to do this in Linux alone, i.e. without Samba or whatever - that is, without Windoze.
View 1 Replies View RelatedMy LaserJet is connected to an old desktop machine that has it shared. The configuration on that desktop is correct, since I have been printing through it from other Windows machines for a long time (and it still works now).
I recently started dual-booting Ubuntu 10.10 on my otherwise Windows laptop, and I've gotten everything basically working how I like it, except that I can't get connected to that printer.
The Vista machine is at IP address 192.168.0.103, and the printer is shared as LaserJet. It's set up with workgroup MSHOME.
When I go to add a printer in Ubuntu, I click the Browse button under "SMB Printer," and I see the MSHOME workgroup, but when I try to expand it, there's nothing inside.
If I try to type in the address directly (smb://192.168.0.103/LaserJet), the Verify button tells me "Print Share Inaccessible, Connection timed out." Note that I can ping 192.168.0.103 fine. I can continue through the rest of the wizard, but I obviously can't print anything out after I finish the setup, since the connection is failing for some reason.
There is no username or password required to see the shared printer.
Any idea what could be going on here? I'm kind of at wit's end here, and I'd love to be able to ditch Windows--with the obvious exception of Starcraft II, of course
I have windows vista 32bit oem that originally came with DELL system when I bought new. On the PC, MS$ sticker has the product key for windows vista.When I reformatted the disk and re-install windows vista natively on the machine for which it was licensed, it got automatically activated and passed MS$ genuine check. But I got into problems when using windows vista as guest os from fedora 13 host os using virtualbox on exactly same machine for which vista is licensed for. I go that MS$ : x -days to automatic activation, activate now link. Clicking on activate now it says invalid product key even I entered correct product key as it is on the PC.
I tried to create new windwos vista guest os 2 ways:
1) using existing native installation of windows vista by using vmware converter to create vmware disk image of the running windows vista and shutting down and log back into fedora 13 used this disk image as the storage in virtualbox and create windows vista guest. It starts up ok except for that activation issue.
2) using the windows vista dvd and using that as the source for new windows vista installation in virtualbox. All fine except got that activation issue.After killing my 2 days just for this I dont know whats next. Does that not make sense that I have a license for using windows vista on this specific pc, I am entitled to install it on that same pc as virtual or native or even both ways ?
This link: http://www.zdnet.com/blog/bott/vista-vi icture/360 says starting with service pack 1 MS$ now allows virtual installation of windows oem. My native installation was updated to service pack 2 and I also updated the fresh dvd install of windows vista in virtualbox to service pack 1 and then service pack 2 but still no effect in regard to license activation.Did any one solved the problem in some way regarding this issue for windows vista, I would like to know.