I recently decided to install Samba in Ubuntu as a home file-sharing server. However, when I try to access this computer from another (using Windows 7), an error messages comes up. It says: "You might not have permission to use this network resource. Contact the administrator of this server to find out if you have access permissions.
The specified domain either does not exist or could not be contacted."
So, I'm trying to set up a network with my windows netbook so the Ubuntu comp can access the internet through the netbook's wireless. Finally got the network set up, but can't access the internet on the Ubuntu comp. Also, the Ubuntu machine can recognize and access the files on the netbook, but the netbook only sees a computer named Owner-a6012abd6 which asks for a password.
The netbook is running Windows XP SP3, with an Atheros AR9285 Wireless Network adapter(internet) and an Atheros AR8132 PCI-E Fast Ethernet Controller. The Ubuntu comp is running Ubuntu 9.04.
I wish to write a python code so that I can access a file on a windows computer on the network. I know the IP, Computer Name, Workgroup, username,password and any other neccesary detail of the computer. I also have the access to the computer to intall any software I may need to install on the said windows computer.
Kindly guide me so that I may access the files. The files are in a folder shared over the network but not on the windows drive of the computer.
I am able to access the files using gui (ubuntu 11.04).
I have ubuntu server installed on a pc. The motherboard died, so I switched the HD to another computer. Everything is fine except the network. I cannot access this computer from other computer (while it was possible before). I looked at the interfaces and everything seems fine. The nic itselft seems to work too.
View 1 Replies View RelatedI have three computers in my network, but two will be mentioned. Computer A is a Linux Mint 9/Windows 7 dual-boot, and I have just installed Mandriva Free 2010.2, which I will call Computer B.
Now my main problem is that Computer B, while it can see and access Computer A's shares as well as the third computer, the aforementioned computers cannot access Computer B. The message was: "Unable to mount location/Failed to mount Windows share." Now, the SMB protocol was used because of the third computer and Computer A have Windows OSs installed in them.
What I originally wanted was that I can share Computer B's NTFS partition, namely Documents and Downloads, to the other computers. And I can't do that, because of the error message.
What I can do, however, is use Computer B to view shares from the other two computers (Computer A, as an example). By my experiences in Linux Mint, I understand that I'd have to mount my Windows partitions in order to share them. I don't even know if my NTFS drive in Computer B is mounted, though that is what was described.
I managed to configure my W890i phone to get access to internet through an ubuntu-based computer. It's very easy to use the phone to give internet access to the computer, but the opposite is quite more tricky. For that I've done the following
----On the phone---
-Set the USB network option to "through computer", so that the phone uses the computer's internet connection and not the opposite.
-Decide and set "Shared Network" parameters: user, pasword and workgroup.
-In "conectivity-> internet connection" set "allow local network" to "yes"
----On Ubuntu 10.04---
-Install samba, samba-client, smbfs, smbclient, firestarter and dhcp3-server
-Configure Samba (System-> Administration-> Shared folders): same workgroup as in the phone, add new user (the phone), passwd this new user. In my case the user was called "w890i" and the password given was the same.
-Once the phone is connected to the computer through USB (then select "phone mode"), a new connection appears in NetworkManager: usb0.The aim is to create a shared network that gives internet access to this device. Edit the IPv4 parameters of this new connection, set them to Manual and give an IP adress (192.168.0.1) and a subnet mask (255.255.255.0); the rest of the fields are left empty.Connect this network.
-Set firestarter to use dhcp3: sudo ln -sf /etc/init.d/dhcp3-server /etc/init.d/dhcpd
-Launch firestarter and follow the wizard. Set "allow internet shared connection", choose the device for the primary internet access, and then the device for the shared network (usb0). Then change the settings for firestarter: activate DHCP for local network, set IP to the one we gave before (192.168.0.1).
-Open dhcp3-server config file sudo gedit /etc/default/dhcp3-server And set INTERFACES="usb0"
-Set the policies of firestarter: in incoming connections, allow connections from the IP adress given to the phone (192.168.0.1). Then add rules for the ports that need to be open for this connection. I opened HTTP, HTTPS, SMB, SMTP, POP3, IMAP, IMAPS, DHCP for all the connections in the local network.
-Apply policies and start the firewall.
------------
After all this, the phone can access the internet through the computer. Two problems appeared:
1. I couldn't get access to https sites, like webmails. The phone gave a "communication error". But then I tried with Opera instead of the browser built in the phone's firmware, and I could finally get to https sites.
2. I couldn't retrieve mail, neither POP nor IMAP nor IMAPS. I thought it was a firmware problem again, and I tried out several mobile phone email clients written in java, but none of them worked.
So this is at the moment the problem. If I connect from the phone to the internet directly through 3G, the email clients work for all my accounts. I don't think it's a firewall problem, because the ports are opened for this connection
I have windows XP and Ubuntu 10.10 installed on the same computer. I want to remote access windows xp from Ubuntu. I have tried remote desktop viewer, terminal server client and tight VNC but nothing works.
View 2 Replies View RelatedI have four home computers (linux) that I can easily access using Remote Desktop Viewer. Two of the computers have Windows partitions with UltraVNC installed and I can access them without a problem.
However when I try to access a friends Windows computer in another part of the state I fail. I have researched the issue at length and it appears to be as simple as it is in my home situation the exception being I need to use the external IP address of the other computer but when I try I get a message saying the computer I am trying to access is closed, (the other computer is turned on) UltraVNC is used on the other computer and it has a dynamic IP address which I am updated with. I have checked the Windows firewall and it will allow VNC and we have tried it with the anti-virus disabled just in case that firewall was causing an issue. Lastly, remote access has been activated on the Windows computer. Can't think of anything else to mention,
I recently installed Ubuntu 10.10 on my sister's HPtx2000 since she isn't going to use it anymore and it worked better than I expect. The touchscreen works without any additional driver tweaking and installation <3, the wireless works fine, the sound works. I listed those because when i was installing, I was looking around at other people that did this and those were the problems they had (but those was of an old OS).
Well anyways, what I want to ask is about the stuff that doesn't work and the stuff I want to do: The buttons that flip the screen and etc doesn't work. Is there a way to map them and flip the orientation of the screen? And the other buttons too, like the media button. Is there a way to map them to open VLC or something? Does anyone know any tablet programs for Ubuntu? E.g a simple text program that can convert stuff written to neat, typed font? A way to write text into a google search bar using the stylus? And while we're on this, is there a way to map a left click on the touch screen?
In Windows, the left click could be mapped to: a). a side button of the pen, b) the top button of the pen, and c) holding the pen down onto the touchscreen. how to use Samba to access a public folder of a Windows computer? And to access the printer connect to the Windows computer? Some of the tutorials I found were only for folders and printers on the Ubuntu computer.
I downloaded the vnc 4.1 on my linux computer which is running Ubuntu I'm not sure how to view it on a windows computer. I really have no idea what i'm doing so can anyone that answers please add as much detail as possible.
View 3 Replies View RelatedI connected my laptop running with Ubuntu 11 in the LAN but I couldn't access internet.But I could ping to the other computers connected in the LAN. I tried the same thing with windows 7 in the same laptop and I could access internet.
View 1 Replies View Relatedrunning apache2, i have already created a working sites. using virtual name hosting.but my problem is, i cant access my other sites except my server's localhost from other computer. i dont know what seems to be the problem, can you guys point me where to start looking?
View 2 Replies View RelatedI'm not really a newbee in Linux but I am a newbee in networking. I have both a Ubuntu laptop and a Gentoo desktop computer. I have just bought me the MBR1000 Cradlepoint router and it works great with my Verizon USB 760 modem plugged in it. I can now send and receive email on my Ubuntu laptop. I like it.My Gentoo desktop computer is just sitting there with no Internet access because my Verizon modem is no longer plugged into it but plugged into the router instead. Only my laptop now has Internet access. The laptop has an integrated wireless card built in the MB but my desktop has no such capability.
Is there a way (besides buying a wi-fi adapter) to get Internet access on my desktop computer through networking so that the router would give both computers Internet access at the same? My Gentoo desktop does have an ethernet adapter that perhaps I could useThe router has several LAN ports and one WAN port, both unused.
I have been studying LAMP for a while now and all my websites are on the localhost. But if i wanted to access my websites from a different computer, how do i access do that? LAMP (192.168.0.2) client (192.168.0.3). Do i need to setup the DNS servers as well in my home network for me to access my intranet (LAMP).
View 2 Replies View RelatedI am in a situation at the moment which means I am going to be without an ISp for a week or two, and I can't survive that long without the intenet!!! What's more, I have 8 computers that need to connect, though not necessarily at the same time, but certainly more than one at a time. Anyway, I came up with an idea to buy a Mobile Broadband Dongle, and then share the connection via my PC. Problem is, I don't know how I would go about setting my PC to be a Wireless Access Point/makeshift Wireless Router, and sharing the connection.
View 9 Replies View RelatedHow I can benefit from a public external IP? Do I need a public IP to access my computer from a remote site?run a tftp server ?
View 1 Replies View RelatedI'm not familiar at all with the networking functions of linux systems, but I just bought an iPad, and I want to store all my movies, music, and documents on my computer at home, and access them from my iPad. I've heard a VNC client is the best way to go. But will this allow me full access, or just to view the screen? Will I be able to watch movies at the highest framerate with this method?
View 3 Replies View RelatedI have set samba shared folders on my ubuntu 10.04, which Windows users on my network use. The problem is, even that I leave the computer on, they cannot access the shared folders until I login with my account to the computer.This is a real problem since I either need to come to the office, login with NX or tell them the password which I don't want to do
View 5 Replies View RelatedI set up my first web server and it works flawlessly -when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.
I have two network interfaces on my server, eth0 (public static IP connected to internet directly) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1. It is connected directly to the internet and serves as a SNAT for other comps on the lan.I added "192.168.1.1 www_server_com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.HOwever, the server itself only opens website if the address islhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www_server_com ( I cant use dots as I do not have more than 15 posts on the forum )Here is the firewall script I am using.
#!/bin/sh
#
# Example Firewall Script
[code]...
I am a newbie to linux of 4 weeks. I set up my first web server and it works flawlessly - when accessed from external network or from other computers on my lan. However, I cannot access it from the computer where the server is run on. I have found numerous people with similar problems but the flavour I am experiencing is somewhat different and no solutions I have found apply to it.I have two network interfaces on my server, eth0 (public static IP connected to internet) and eth1 connected to LAN 192.168.1.0/24 range. The server is 192.168.1.1
I added "192.168.1.1 www.server.com" to the /etc/hosts on the server and also on the other machines on the LAN. All the other machines can open website without any problem.
HOwever, the server itself only opens website if the address is localhost. Internal IP, i.e. 192.168.1.1. gets a time out and so does www.server.com.I do not understand why the record in etc/hosts doesn't point it in the right direction. It seems that when I open address 192.168.1.1 it still gets routed to the external network. I have seen using DNAT to deal with the problem but it didn't work in my case (maybe I didn't do it correctly). I have spent whole evening/night trying to sort it out, it's 4AM now, going to bed frustrated and angry (at myself hahaha). Still like linux very much, won't be going to windows anymore. Please help
I am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code:
lancer@lancer-desktop:~$ ping www.google.com
PING www.l.google.com (74.125.237.17) 56(84) bytes of data.
64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms
64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms
64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
I have Ubuntu 9.10 setup on a test box. I am able to connect to my Win XP box shares but I cannot connect to my Win 7 (64 bit) box I get the usual 'Unable to mount location'. I can get to the Win 7 share from my other Win box so it is a valid share. I also cannot connect via the Remote desktop viewer. I am afraid that if I cannot get this going my Ubuntu experiment i over before it started.
View 2 Replies View RelatedRunning Ubuntu 9.10. In the Remote Desktop config dialog I get: "Your desktop is only reachable over the local network. Others can access your computer using the address 127.0.0.1 or tabatha.local." I understand this means only the loopback ip address is available. All my other machines show their true local ip address (e.g., 192.168.1.104) in this dialog. Thus I cannot log on to this desktop from other machines.
When I try to do a remote logon from another Ubuntu 9.10 box (or from an XP box using a VNC viewer), I get: "Connection to 192.168.1.102 has been closed." What steps are needed to make this machine show its actual ip address? All file sharing between the various machines is working properly and all windows shares back and forth between XP and 'nix, and among the the vaious XP boxes and linux boxes are available as designed.
I have just installed Ubuntu 10.4 LTS and would like to share this computer on my windows network. I understand that Samba is the way to go, but how do I configure linux with Samba so I can share files and printers? I am able to see my windows computers (vista and xp) but I am not able to see the linux computer with those machines plus I would like to change the network name of the linux machine if possible. Please any help and information will be much appreciated. Eventually I would like to server a printer from this linux machine to the other windows machines.
View 6 Replies View RelatedWindows 7 computer can't see ubuntu 10.04 computer. Ubuntu machine can see and access rest of windows network including a linux enabled PVR. Tried various things to no avail.When setting up for shared folders I got a message that I needed to install shared services. I did this but I only have one share through option: Unix networks (NFS). The samba option, which I should be using is not available. I tried to allow "Share files over the network" but had to install some extra service. While "share files over the network" can and has been enabled, accessing the windows network has become painfully slow and my windows 7 machine still can't see the linux box
View 1 Replies View RelatedI have serious issues with sharing the HDD drives physically on Linux machine 10.10 in my living room, with the windows 7 computer in my room, connected with wifi.
/etc/samba/smb.conf
Quote:
[MP3]
path = /media/MP3
writeable = yes
browseable = yes
[Code].....
I have a very simple network of two computers. One is running ubuntu (Maverick) and the other running Windows (Vista).The two computers are networked satisfactorily but I wish to control the Vista computer from the ubuntu one.I have tried running UltraVNC on the Vista computer and the default VNC from ubuntu. However neither computer can see the other using VNC.
View 8 Replies View RelatedI am trying to create a Samba share on Ubuntu so that I can see it on my Windows computer but have had nothing but trouble. I've tried everything that I could find in Google but the best I can get is that my Ubuntu computer shows up as Unknown device on my Windows computer. Unfortunately, my Windows computer belongs to my company or I would just switch to Ubuntu altogether. I have posted a couple of screenshots of what I see in Windows, my GParted partitions, and the options that I have enabled for the folder I am trying to share. Below are my fstab and my samba files from Ubuntu. I am sure that this is just some rookie mistake as I am new to Ubuntu. It certainly seems that this should be easy, but I just can't get it.
# /etc/fstab: static file system information.
#
# <file system> <mount point> <type> <options> <dump> <pass>
[code]...
I just got my Ubuntu 10.10 laptop to finally be able to access my Windows 7 Professional's shares, and I'd like to share how I got it working. Whenever I would go to Places > Network on Ubuntu, and then double click on my Windows computer (sometimes after finding it in Windows Network > {workgroup name}), it would immediately bring up a box saying "Password required for {computer name}". My Windows password wouldn't work here, but I didn't even want to be asked for a password. In Windows, under Network and Sharing Center > Choose homegroup and sharing options > Change advanced sharing settings..., Turn off password protected sharing was already selected.
So, I eventually found out that samba (the program Linux uses to talk with Microsoft's SMB network share protocol) has a bug of sorts. The format of the SMB packets coming from a clean Windows 7 is known by samba. However, if you install Windows Live Sign-In Assistant (which is provided through Microsoft Update) on Windows 7, the packets coming from Windows 7 are modified, and samba can not handle this. A patch has been written for samba, but Ubuntu's repositories (which has samba version 2:3.5.4~dfsg-1ubuntu8.1) does not yet have that patch.
Also, it seems Microsoft has stopped Windows Live Sign-In Assistant from appearing in Programs and Features. It doesn't appear even if you specifically download and install it separately. I did, however, notice that the installer calls itself Windows Live Essentials 2011. So I found that in Programs and Features, and uninstalled it. It asked which components I wanted to uninstall, and I selected all of them. Rebooted Windows, and now I can access the share no problem. I also grabbed the offending packet using Wireshark before and after that uninstall. The packet is indeed different. Specifically, without Windows Live Essentials 2011, there is no mechToken in the packet.
The current version of samba available is 3.5.6. I may try downloading and compiling that later, and see if it deals with the change that Windows Live Essentials 2011 makes OK. Also, it may be possible to get the share working without uninstalling every single Windows Live Essentials 2011 component. You may want to try that if you would like to keep a component.
A friend came by, and we tried to log her on to our wifi network when she was having trouble accessing it with her Windows (Dist #) machine.he wifi network itself was set up with macs, and had standard, open settings as far as I could tell - no password, NETGEAR title of the network.The Windows computer prompted us for a Security Pin, which we gave it from the router, and then all of the computers already on the network got dropped, while the Windows machine got set up onto the wifi, renamed the network with its own username, and automatically set up a password.I'm currently on the network using LAN, but can't figure out how to set up the network through Ubuntu back to the original settings for the rest of the people that need to access the network.Specs:I'm running Ubuntu 11.0,The Windows machine is unknown right now. I'll repost if that will help.The wifi router is a Netgear Wireless N 150 WSR 1000, with the serial, mac, and security pin numbers.
View 2 Replies View Related