I have 2 NICs on my computer connected to 2 different networks. On 1 interface i wish to disable the return of ping and on the other interface i wish to still allow ping. Is this possible? Both interfaces need to be able to send and receive data. I know that you can disable ping in /etc/sysctl.conf but is there a way to set the ping value for a specific interface only?
View 2 Replies
I have an ubuntu server that I am using as a gateway router. I have 2 nics in the machine and am using iptables to run the NAT.I now have a need to provide several machines on the inside of the network with their own public IP. So I created a virtual interface on the the WAN card and attempted a 1:1 nat across it, but it's not working. The virtual interface isn't even responding to pings. If I ping the ip of the virtual interface from the outside, it doesn't work. If I run a tcpdump on the interface, I can see ICMP request packets but no replies. Watching the same dump while pinging the non-virtual interface IP results in both request and reply packets. What's stranger the inbound ICMP request packets on the virtual interface seem to be hit or miss. Sometimes when I ping it, I can see the request packets hitting the interface, sometimes I get nothing.
View 1 Replies View RelatedI am working on a project that needs to know that an interface is up and has stable connectivity so I am told by higher ups that I am going to use ping to solve this. So I was writing something much like the ping program to send out ping packets to [URL]. The issue comes in the fact that I need to do this for every interface that is currently up. So I mimic the code from iputils version of ping to tie the socket to an interface and everything works well except I don't get any packets returned to me.
So digging further I opened wireshark and indeed my interface is getting the ICMP echo response packets but linux (ubuntu 8.10) isn't passing the packet up. So I tried running "sudo ping -I ppp0 www.google.com" and the exact same behavior happens here too. (also seen but not solved here: [URL]. Also my iptables in empty and I also have a wifi connection which is my default gateway in addition to the 3G ppp0 connection. It is not a routing issues cause when I collect packet on the given interface I see the packets that should be there.
The entry in the routing table for ppp0 is: (dst)68.28.xx.yy (gateway)0.0.0.0 (genmask)255.255.255.255 (flags)UH (metric)0 (ref)0 (use)0 (Iface)ppp0
So I was wondering if anyone would either A) be willing to spend a minute to check and see if they are able to ping with the -I option and if so let me know if their routing has entries for that interface (route -n) or B) if anyone has any ideas on why the system isn't passing the packet up to the socket?
im trying to ping from a specific interface, I have a wired and a wireless connection both going into my laptop.
My wired adaptor eth0 is on the ip 172.16.109.75 my wifi adaptor wlan0 is on the ip 192.168.1.69
when I ping google with my eth0 unplugged with the following command
Code:
conneco@mcr-pc-29334:~$ ping -I wlan0 www.google.co.uk
PING www.l.google.com (74.125.230.115) from 192.168.1.69 wlan0: 56(84) bytes of data.
64 bytes from 74.125.230.115: icmp_seq=1 ttl=51 time=32.7 ms
[Code].....
So I keep reading that bonding ethernet devices is supposed to be easy. I have followed several tutorials and tried a few things on my own, and I can't seem to get it right. I currently have a setup that allows me to ping internally on my network, but when I try to ping externally I get the error:
connect: Network is unreachable
Before I bonded the interface my connection worked fine. Here are my config files. I am running centos 5.3 on a virtual machine.
/etc/sysconfig/network-scripts/ifcfg-bond0
Code:
DEVICE=bond0
BOOTPROTO=none
ONBOOT=yes
NETWORK=192.168.1.0
NETMASK=255.255.255.0
IPADDR=192.168.1.211
USERCTL=no
/etc/sysconfig/network-scripts/ifcfg-eth1
Code:
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth1
BOOTPROTO=none
ONBOOT=yes
HWADDR=00:0c:29:88:59:47
MASTER=bond0
SLAVE=yes
USERCTL=no
/etc/sysconfig/network-scripts/ifcfg-eth0
Code:
# Advanced Micro Devices [AMD] 79c970 [PCnet32 LANCE]
DEVICE=eth0
MASTER=bond0
SLAVE=yes
BOOTPROTO=none
HWADDR=00:0c:29:88:59:3d
ONBOOT=yes
/etc/modprobe.conf
Code:
alias eth0 pcnet32
alias scsi_hostadapter mptbase
alias scsi_hostadapter1 mptspi
alias scsi_hostadapter2 ata_piix
alias eth1 pcnet32
alias bond0 bonding
options bond0 mode=0 miimon=100
output of cat /proc/
Code:
Bonding Mode: load balancing (round-robin)
MII Status: up
MII Polling Interval (ms): 100
Up Delay (ms): 0
Down Delay (ms): 0
Slave Interface: eth0
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:0c:29:88:59:3d
Slave Interface: eth1
MII Status: up
Link Failure Count: 0
Permanent HW addr: 00:0c:29:88:59:47
I am using an virtual machine. where I need to ping from one machine to another. earlier I was able to ping. But after going to google.com once, I cannot ping back to this machine.
But if I gave ping -I eth1 <IP> then I can ping.
I cannot install any package, so tell me solution which includes not installing any package.
When I run OpenVPN server - tap0 adapter, it breakes Teredo(Miredo) IPv6 address down. I dont need IPv6 on OpenVPN, so is there any way to disable IPv6 on tap0 completely?
View 2 Replies View RelatedIm new to this Cent OS as well as Unix based Operating Systems. Please help me with the below requirement.My Company is a Serach based data collector from different websites like Google, Yahoo & many more..Collecting the data from the search engines is a issue for right now.. As many search engines are blocking us to search and retrive the date after some time.. Taking Google as example : Google Blocks my IP after every 30 mins of retriving.. Application is a Windows based & using Windows 2003 as the Server.. Would like to give a Dynamic IP to the Windows Server via 1st Ethernet Card & enable the 2nd Ethernet for the Internet..Eg : eth 0 = 192.168.1.1eth 1 = x.x.x.x (Public IP)I have check with few of my friends who told me to get Linux or Cent OS installed to do a interface disable after given time & enable a secondary device or virtual interface the next couple of seconds... Like eg : eth 1 = x.x.x.1 eth 2 = x.x.x.2 eth 3 = x.x.x.3 so on.. Would like the eth 1 to be down after 60 mins & eth 2 o be up & again after 60 mins of up time eth 2 down & eth 3 up.
View 6 Replies View RelatedMy laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies View RelatedBasically i want the opensuse firewall to stop responding to pings-how do i do this?
View 2 Replies View RelatedIve got a problem on my server ....installed Debian 5 , Webmin and than syscp settung up syscp ready ....
I try to ping "localhost" ansver ping: unknown host
I try to ping "localhost." there is a host with IP 127.0.0.1
I need it to change it in "localhost"
Is that the bind9 maybe?
I have two machines on this network, one running Ubuntu and the other running Fedora.
When I'm using the Wireless network on the Ubuntu machine, I cannot ping the Fedora machine. Everything else works. I can browse the net fine.
If I switch over to the Wired Network then I can ping the other machine.
I don't understand why ping doesn't work only over the Wireless. I can ping the router so I'm guessing it's getting blocked by the router but I didn't block ICMP traffic.
I tried asking on IRC and they ran out of ideas too to find out where the problem is.
I did a shields up test and it told me that 1056 ports were stealth but that my pc responded to ping and was visible on the net. How do i fix this?
View 4 Replies View RelatedI just installed my first EVER bind DNS server. I am running bind9 on Ubuntu 10.04. Everything seems to be working great except one thing: If I ping a host that I have set up in bind by its HOSTNAME the pings take 5-6 seconds to reply/print to the screen between each echo response. If I ping by the host's IP address, they echo back very quickly.
I have read that IPv6 can cause this, but I have disabled it in /etc/sysctl.conf and the problem still exists.
I know everyone says this can't be a DNS issue, but this never was an issue with dnsmasq (which i was using prior), and it doesn't make sense that the ping are ONLY slow when pinging by hostname and not IP.
Configs below:
Ping by hostname - there is a 5-6 second delay between each one of the responses:
Code:
Ping by IP - the responses come VERY quickly one after the other:
Code:
/etc/resolv.conf:
Code:
Code:
rev.0.168.192.in-addr.arpa:
Code:
So, I have an Virtual Machine running CentOS 5.4. It sits behind a hardware firewall which also does NAT'ing. I've set up plenty of these, so I know for sure the firewall and NAT rules are set up correctly. From the host, I can ping anything in my subnet and the gateway. But I can't ping anything else beyond the gateway. I can perform DNS queries and when I try to ping, it finds the appropriate IP address.But from the outside, I can ping the PUBLIC address (It's a 1 public to 1 private address NAT, not 1 public to multiple private). I've tried it with IPTABLES on and off, with no change.
View 11 Replies View RelatedI have Mandriva One 2009.0 (192.168.1.100) on one box and Mandriva Free 2010.0 (192.168.1.118) on the other. I can ping router (192.168.1.1) from both of these boxes but I can't ping one box to the other and the other way around. What's going on?.
Do I have to change some settings in router?. Or is it firewall issue on those two machines?. Both of these boxes are connected by cable. Symbol of the router: TL-WR340G.
recently I have installed a suse 10 sp2 on my computer. I have a big problem about connecting to my ADSL Router. The problem is that I can't ping the router at all and the Kinternet log is prompted that
status is: disconnected
trying to connect to smpppd
connect to smpppd
Status is: disconnected
error: cannot read real interface for eth-bus-pci-0000:04:00.0
I can easily open the web page of my router with windows OS but in the suse I can not do that with firefox.
I'm trying to prevent users from accessing the grub menu, but setting the timeout to 0 doesn't cut it because a user can hold down ESC during boot.At the moment, it seems that my only option is to set a password for grub. But I was hopping that there is a better way where I can disable that feature completely.
View 11 Replies View RelatedI just had an ATT Uverse RG installed. However my Smoothwall router that previously worked fine with the ADSL SpeedStream is no longer accepting an address assignment DHCP ip address from this new gateway. (3800HGV-B)Any thoughts ideas or experience working with this hardware? ATT only supports Windows and Mac
View 2 Replies View RelatedI have a ppp0 entry with post-up options like this
mapping ppp0
map none photon-plus motorola
map timeout: 12
[code]...
Does any body knows how to disable the root login to the GUI , like i am running my redhat server on runlevel 5 and i dont need tht root to get login to the GUI , i ma talking about redhat 5.
View 2 Replies View RelatedI have set 'ONBOOT=no' in interface script '/etc/sysconfig/network-scripts/ifcfg-eth0:2' but my interface bring up at boot time, what is the problem , I have checked it 3 or 4 diff os/machine but the same issue. Can anyone please help me to disable virtual IP's at boot time that network script make it up every boot time.
View 4 Replies View RelatedI have connected xp and fedora through crossover cable . xp has ip address 192.168.0.1/24 (manually assigned) fedora has 192.168.0.2/24 with default route equal to 192.168.0.1
I can ping fedora from xp computer but i can't able to ping xp from fedora computer.
I have manully edit the /etc/sysconfig/network-scripts/ifcfg-eth0 file with correct subnet mask and ip address because when i tried to give ip address manully in network manager the subnetmask is replaced with gateway address don't know why.
Now i want to share internet through crossover cable . xp is connected to internet through wireless usb adapeter.
I try to ping with php : exec("ping -n 1 $ip",$output[],$retval); it works fine in window. but in linux i got this error : ping: icmp open socket: Operation not permitted are there any ways to solve this ?
View 5 Replies View RelatedHost - Fedora 12 64bit
KVM
VM - Windows Server 2008 64 bit
bridge-utils
VM can ping host and Internet but host can't ping VM.
I set VM static IP 192.168.0.205.
It turns out dynamic IP - 192.168.0.55
On host:
This applies to my 2 opensuse PC's, my Windows PC is fine.I can ping a hostname, say "PC1" but I can not ping PC1.domain.local (even the host PC can not ping it's own FQDN). When I ping just the hostname the ping stats even list the FQDN.Onto the next issue, since all my PC's, have the domain prefix domain.local, my Synology can not. I can ping it's IP and that is it. I can resolve it's name with nmblookup just fine tho and that is what is killing me. How is this not resolving.Even weirder, I can browse to "Synology" in Network Servers under places on the slab.
View 3 Replies View RelatedEven ping google's ip address doesn't work. unknown host error using backtrack4 able to browse net with these settings.
My network settings:
What's the problem with these settings...
I can connect to the internet and browse. I'm wired and using DHCP on a Windows network. Updating Ubuntu or downloading programs takes hours for 52MB of updates. Why? I read some articles that mention Network Manager needs to be enabled at the .conf file. Can I edit this using GUI or command line only?
View 9 Replies View RelatedI am trying to get a Linux (Slackware 13.37) working in a Windows networking environment. The IT support for this organisation does not extend to Linux support, so I'm limited in what help I can get for this.
I'm trying to get to the point where I can get to the internet to download what I need on this Linux machine.
The situation is this (*fictitious addresses used) -My Linux machine uses a fixed IP address (10.100.150.21)
My Windows machine uses a DHCP assigned IP address (10.100.150.213)Both Linux and Windows machine are configured to access the gateway server (10.100.150.1)So, I can ping the Linux machine from the Windows machine and vice-versa.I can ping the gateway machine from the Windows machine.I can browse Windows Shares on the network via SMB from the Linux machine.I CANNOT ping the gateway machine from the Linux machine with the Destination Host Unreachable message being the error message.
For actual internet access I need to access a proxy server but since the Linux machine can't even ping the gateway server, it fails to ping the proxy.Now, I have been told the gateway is a HW based router and for Windows machine they use some software for authentication to connect to the network. This software isn't available for Linux, so that's why I've been told to use a fixed IP address.My experience of networking is pretty basic and most of the Linux setup is done via running Slackware's setup program.
I have a debian server installed with a static ip. Now i am able to ping my ip, but when i try to configure a domain name with the nameserver as my ip, i am not able to ping the domain name
eg:
