Networking :: Connect From Server Operating On Windows Os From System Machine Using Ssh ?
Aug 9, 2010I have a query related networking .
I want to know how to connect from a server which is operating on a windows os from a linux machine using ssh
I have a query related networking .
I want to know how to connect from a server which is operating on a windows os from a linux machine using ssh
I have two machines in different location, lets say machine A and machine B.
Machine A:
- Linux Red Hat OS.
- Has internet connection (no proxy).
- Has public IP.
Machine B:
- Windows XP OS.
- Has internet connection (with HTTP proxy).
- Has connection to machine C and machine D. Machine C and D don't have internet connection, but machine B can connect to those machines because machine B, C, and D are located in the same network.
I need to connect machine C and D via machine A. I heard it can be done using ssh between A and B, but I don't know the details.
I've come across this rare issue, I have a friend that uses some software that is particularly slow in Windows 7, the best compatibility is in Windows XP, I told him to make a partition and have both OSes in the computer, at which he replied: "Could I have a different OS for each user?", it seemed like a good question to me, so is that possible?, suppose that I login and it boots me to Vista, then I loggout and Linus Torvalds comes and logins and boots him into Ubuntu, he gets bored and logs out, afterwards my friend comes and logs in, booting into XP, summarizing:
The operating system that will be loaded will depend on the user that logs in.
Will a Linux operating system lose data during a power failure as does a Windows operating system?
(If yes.) This has not come up before but I'm going to be doing some work I don't want to lose.
Could you either point me to a backup tutorial or give me the quick overview of preserving stuff with Ubuntu?
Using the instructions provided here, I've been able to use my Linux desktop to VPN into my workplace when running 32-bit Maverick. I've yet to accomplish the same using 64-bit Maverick, which has forced me to install the 32-bit version on my 64-bit Gateway NV55C. Has anyone been able to use Juniper Network Connect on a 64-bit Linux operating system?
View 1 Replies View RelatedI'm currently switching to a new laptop that will be my main machine and currently I use a laptop and a desktop on a daily basis. The laptop will continue to be used by another member of my family but the desktop will no longer have any use (well I might later build a new desktop but this one has finished his service).
The machine in question has:
AMD Athlon 64 3800+ @ 2.4GHz
4x512MB DDR-400 (2GB Total)
Seagate 200GB SATA 7200RPM 8MB Cache Hard Drive
Geforce 6600GT 256MB GDDR3
Since I will no longer use it as a desktop/working machine I'd like to set it up as a home server. However I can't decide which OS to use for that. I have access to all Windows Versions since XP/2003 (with the exception of Windows Home Server) and I have some knowledge using both Windows and Linux so that's not a problem on my choice.
[Code]...
could any one tell me about the uses of linux operating system compared to windows operating system
View 6 Replies View RelatedI am a primary school teacher at a school with hardly any money running 50 pcs on windows server 2003. We recieved 2 donated pcs without windows, so thought of installing a free copy of linux on them and then connect them to the server. Which linux version does this best and how would i do this?
View 6 Replies View RelatedI need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies View RelatedI installed samba and samba-client (sudo yum install samba samba-client) but I still cannot connect to this Windows machine.I installed samba, started the samba services (although that may only by necessary to connect into Fedora?), and even restarted the computer and I still cannot do this, I have been googling like crazy and only se articles on how to make Fedora a samba server...
View 3 Replies View RelatedI'm using Ubuntu 10.04 LTS. How can I connect to a Windows machine? I'm trying to connect to a VirtualBox machine with Windows XP on it. I can connect from the VirtualBox to Ubuntu. But, can't find a way to do it from Ubuntu.
View 8 Replies View RelatedI am used to using Ubuntu Desktop edition (Lucid Lynx to be exact), so I downloaded Ubuntu 10.10 Netbook edition for my little Acer Aspire One. One problem though. The places menu isn't there anymore.
How do I connect to a windows machine share? I tried searching the forums, but they all mention using Places > Connect To Server.
I have 30 systems in a LAN . My users need to login as domain user from their XP clients and store their files in the Linux server. They should not be allowed to store in local machine and also should be granted a particular size of space in server.
what are the procedures to be done in linux server and
just like in windows we access shared files in by typing in run command
\192.168.0.1 is there a provision to view shared files from xp to Linux
I remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
I've set up a PC installed with Ubuntu 11.04 on my home network, given it the name "server" and given it a static IP of 192.168.1.200. I've created a file in the home directory called "Public" and set it to be shared with everyone, basically a chmod 0777 situation. Now, how do I connect, or map out that folder from another ubuntu 11.04 machine? I know how to do it in Windows, just hit "run" and type in "\server" and blamo, I can see everything that's shared on that machine. I can't figure out how to do this with Ubuntu.
View 5 Replies View RelatedAs a Windows user, I generated a pair of DSA keys from CoreFTP Lite and sent it to a third party that runs an SFTP server. They told me that a valid DSA key needs to have ssh-dsa at the start and the username@systemname at the end. CoreFTP generated neither the ssh-dsa header nor the username@systemname footer. I tried with WinSCP and it didn't generate them either. Is there a difference between how SFTP works between Windows and Linux? If I put a useraccount@systemname at the end of the text will it work? How would the Linux system validate that my system is called "systemname"? If it can't validate, what is the purpose of adding it?
View 2 Replies View RelatedI'm considering making the switch to Linux on my laptop, most likely to Ubuntu. However, I have a home server running on Windows 2003, is there any way I can connect my laptop on Ubuntu (or if there's a different version that would work) to this server?
View 3 Replies View RelatedI want to experience Ubuntu and want it on my machine. I currently have Windows 7 installed and was wondering what the easiest or best way is to install Ubuntu so I can choose to run either Windows 7 or Ubuntu.
View 4 Replies View RelatedIs their a user friendly linux operating system to replace windows pc?
View 4 Replies View RelatedWindows XP is installed in my C drive. Can I install an another fresh copy of Windows XP or Linux or Windows 7 in same C drive without formatting the previous one?
View 4 Replies View RelatedI wished to know if I can install windows 7 on my system when I am already running Linux Mint 10(as the only operating system on my machine). That configuration is called a dual boot. If you install Win7 first (or it is already present), THEN install linux, you will find that grub notices both and you will not need to mess with the MBR. The better solution is to load mint, add VirtualBox, and install Win7 into a virtual machine. Then you get to run Linux and Windows AT THE SAME TIME!
View 4 Replies View RelatedI'm the Administrating the computers in my office. I want to monitor the user's activity. How can i remote login without distrubing the user's activity on his computer? Any software need to be installed? (I don't want to use Terminal server client).
View 5 Replies View Relatedi want to know how to connect it to debian,fedora, mandriva, puppy (or any other distro thats independant and most software needs to be installed with tarballs)and i also want to learn to connect to it with mac os x, and solaris (open solaris)
View 10 Replies View RelatedI am unable to install 10.0 over a Windows XP operating system. I receive the error "Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on//filesystem.ashfs
View 1 Replies View RelatedI want to copy a windows operating system dvd to a usb flash drive. (I want the flash drive to be bootable under windows).
View 2 Replies View RelatedActually i've packages to show my ntfs partitions on my red hat linux but i 'm unable to install these packages. how can i install the packages
View 2 Replies View RelatedI am trying to share files between my Windows XP machine and ubuntu server. I set up and configured samba following the instructions in the Online Ubuntu Server Guide. [URL] This is the abbreviated version of my smb.conf file here.
[global]
workgroup = HOME
server string = %h server
interfaces = 127.0.0.0/8, 192.168.1.101/24
# map to guest = Bad User
[code]....
At work I'm using a windows box with local and network drives. One of drives I have mapped is my Linux home directory (We have separate windows and linux accounts and home directories here). When I view it from windows, all of the files and folders beginning with . are shown, as would be expected. (Although . and .. aren't in any folder)
Just wondering if there is a way to tell windows to not show anything starting with a dot. I was hoping there's a registry entry or something that defines what a 'protected operating system file' is, so I could put dot files in the same category as thumbs.db etc.
I was wondering if there is some way to determine when a file finishes writing to a directory on both Windows and Linux (obviously, they will probably be two different commands). This is mostly so that, instead of constantly polling a directory for new non-temp files, I can set up a program to simply listen for the completion of a write-to-disk (it seems better to do things that way).
View 3 Replies View Relatedi planning to use ubuntu server as my operating system so that transparent proxy can be install using squid. i know that, ubuntu already has their own firewall that is linux ip table and but i want to use independent firewall that is pfSense since i need to install 2 transparent proxy in a network..see the diagram for details [URL]
is there is any possible, if i just want to use linux iptables at each transparent proxy server rather then using a independent firewall?