I am used to using Ubuntu Desktop edition (Lucid Lynx to be exact), so I downloaded Ubuntu 10.10 Netbook edition for my little Acer Aspire One. One problem though. The places menu isn't there anymore.
How do I connect to a windows machine share? I tried searching the forums, but they all mention using Places > Connect To Server.
I'm using Ubuntu 10.04 LTS. How can I connect to a Windows machine? I'm trying to connect to a VirtualBox machine with Windows XP on it. I can connect from the VirtualBox to Ubuntu. But, can't find a way to do it from Ubuntu.
View 8 Replies View RelatedI installed samba and samba-client (sudo yum install samba samba-client) but I still cannot connect to this Windows machine.I installed samba, started the samba services (although that may only by necessary to connect into Fedora?), and even restarted the computer and I still cannot do this, I have been googling like crazy and only se articles on how to make Fedora a samba server...
View 3 Replies View RelatedI have two machines in different location, lets say machine A and machine B.
Machine A:
- Linux Red Hat OS.
- Has internet connection (no proxy).
- Has public IP.
Machine B:
- Windows XP OS.
- Has internet connection (with HTTP proxy).
- Has connection to machine C and machine D. Machine C and D don't have internet connection, but machine B can connect to those machines because machine B, C, and D are located in the same network.
I need to connect machine C and D via machine A. I heard it can be done using ssh between A and B, but I don't know the details.
I have a query related networking .
I want to know how to connect from a server which is operating on a windows os from a linux machine using ssh
I remember it being really easy to add a printer attached to another computer using Ubuntu, but I don't remember exactly what made it so easy. All I know is that now that I have switched to Kubuntu the process has become much harder because now I have to find out some special locations, numbers etc. for it to connect to the printer. It's connected to a Windows XP machine on the other side of the house.
It says alot about 'contacting the network administrator' if I am unsure about what to put in. But I am more or less the network administrator. how to find out what numbers to put in so that my Linux machine can connect and print to the Windows machine? Or maybe someone knows a few commands to share? I go to Applications > Settings > System settings, Printer configuration, New Printer, New Network printer, and then there are a few options but I don't know which one to choose. Windows Printer via Samba, I guess? Then in the box that says smb://[enter stuff here] I need to put in info but I don't know how to find that info.
I try to access my ubuntu machine via my Windows Machine (Samba Server on Ubuntu Machine). Anytime I try to access the machine it asks me for my password...I enter it but it says it is invalid....is there anyway to reset it? I have already tried to remove and purge everything Samba related and then tried reinstalling, but that still didn't do anything
View 2 Replies View RelatedI am trying to establish the easiest way to share a folder from an Ubuntu machine to a Windows machine.In the past I have added things to smb.conf and that has all worked fine but what I am trying to do is to figure out what the "new user" way of doing this is so that when I am helping other people I know I am getting them to do the simplest thing.I completely removed samba and reinstalled it so that I didn't have any configuration. Right clicked on a folder and selected "Sharing Options" ticked the "Share this folder box" gave it a name and a comment and ticked the other two boxes.
When I went to the windows laptop then it kept asking for a username/password and nothing worked.Back on the ubuntu machine I did sudo smbpasswd -a [username] and created a blank password. Now from the windows machine I can access the shared folder.Is the smbpasswd step still required? It's very confusing for a new user as there is no suggestion that anything other than right clicking on the folder and choosing the options you want would be required. Is it something to do with the fact that this is an ubuntu machine that has gradually been upgraded through versions and this problem wouldn't have been there from a new install?
Right now I have a machine set up running Fedora. I have configured inittab to accept Console Logins, but I am having problems getting my netbook running PuTTY to connect. How would I go about finding the Host Name and Port to connect to?
View 6 Replies View RelatedI need to access a Windows Server 2000 machine using a Linux machine via KDE, but that will migrate to Gnome. The Linux user to connect to Windows machine, you should open an application 'XYZ' automatically, and only this, denying any unauthorized access. When you close the application 'XYZ' communications (RDP?) Should be terminated. Do I need a log of accesses and possible attempts to circumvent the system and access other application.
View 7 Replies View RelatedI had run one script in unix machine and want to copy the results to a windows machineBoth the machines are on different networksIn linux machine trying to do the ftp to the windows machine its giving connection refused. How to chech whether ftp is running on that linux machine or not?Also tried scp and ssh , both are failing
View 6 Replies View RelatedI have two machines, one has XP service pack2, second one has CentOS 5.3 (Linux), they are connected through crossover cable. I have configured everything fine but don't know why till now can't ping!
A. Windows machine settings as follows:
IP Address: 192.168.1.3
Subnet Mask: 255.255.255.0
Default Gatway: 192.168.1.1
+ Firewall is turned OFF.
B. For Linux machine, I will list everything stored in network files, logged as [root@localhost ~]# :
1. /etc/sysconfig/network:
ifconfig eth0 192.168.1.4 netmask 255.255.255.0 up
route add -net 192.168.1.0 netmask 255.255.255.0 eth0
route add default gw 192.168.1.1 eth0
NETWORKING = yes
NETWORKING_IPV6=no
HOSTNAME=localhost.localdomain
2. /etc/sysconfig/network-scripts/ifcfg-eth0
DEVICE="eth0"
IPADDR="192.168.1.4"
NETMASK="255.255.255.0"
ONBOOT="yes"
BOOTPROTO="yes"
3. /etc/resolv.conf
nameserver 192.168.1.4
search locadomain
4. I restarted network service using this command:
/etc/init.d/network start
everything is fine. When checking using ifconfig command. I get the following:
eth0 Link encap: Ethernet HWaddr 00:08:0D:EE:19:66
inet addr:192.168.1.4 Bcast:192.168.1.255 Mask:255.255.255.0
inet6 addr:........
[code]....
I mean I assigned the IP: 192.168.1.4 to Linux machine (Eth0). I did everything above and can't ping till now, when pinging from windows or Linux I get a message "destination host unreachable" restarted Linux many times but same result. NETWORK CABLE is working fine I tested it.
Trying to setup Samba for the first time and am unable to connect to the share from my Windows machine. It is a very basic setup, just trying to setup a single share to use a backup location for my windows files.
I've done the following:
1. Fresh install if fedora 15
2. installed samba
rpm -qa | grep samba
gives the following:
[Code].....
3. Used samba server configuration to setup the share and create the samba users
4. When I tried to connect from my windows machine I get the error that the server is not accessible, you might not have permission to use this network resource or I get the error "windows cannot access server, check spelling and try again.
Both computers can ping each other. I opened samba ports in the linux firewall and tried to connect again: same error Disabled firewall all together and have the same error. Here is the output from the testparm command
[Code].....
I am new to Xen Hypervisor and wanted to know if someone has any good guides to configuring it please. Also once i configure a Guest OS how can i connect to it remotely via a windows and linux machine?
View 1 Replies View RelatedI have a Posh new 64bit Ubuntu computer with one of the latest distro's on it,works loverly.this is in my front room.In my beroom I have an older box with Xbutu 10.10 installed which I want to use to play movies into my telly that are stored on the ubuntu box which is connected to the same sky router.I tried ubuntu before xbuntu to achieve this ,which worked with "connect to server",but the bedroom machine doesnt have the Ooomph to play movies without clipping the video part.I was hoping Xbuntu would free up enough resources to enable the playing of movies, and it is indead more suitable,but I cant work out how to connect to the files on the ubuntu machine.
View 1 Replies View RelatedI'm using Ubuntu 9.04 x86_64 and trying to setup SSH to connect to my machine externally. The open ssh server is already installed and I can using ssh localhost. Moreover, I also forward port 22 to my machine and check using [URL] Everything seem to be ok, but when I trying to connect using ssh -vvv <ip-address> I receive the following common error:
[Code],,,,
I can't connect a printer to my machine that's running Ubuntu 10.04 because it's outdated; however, I have another computer (Mac) that has a printer attached to it. Does anyone know how I can connect to that computer form my Ubuntu machine and send over documents to be printed on my Mac? Maybe through a remote desktop? Or SSL?
View 5 Replies View RelatedI installed XRDP on my home machine, made sure the service was running, NAT'ed ports 3350 and 3389 TCP to the machine in my router and punched corresponding holes through Guarddog on these ports on the machine as well, but connecting with: rdesktop -f "my IP here" from my workplace doesn't work. I get "unable to connect".
I have a feeling, it's still the firewall. Do I need to tick permitting the rdesktop protocol in both the "local" and the "Internet" zone or do I need to also establish specific custom rules?
I am having problems connecting to my Fedora machine wirelessly. What i mean is that if i try to access samba \192.168.1.93 rb while connected to my wireless network i can't connect.The only way I can connect to this machine is if i connect my laptop directly into the router then i can successfully connect.Does anyone have any idea why this is happening? The strange this is i used to could connect wirelessly.
View 1 Replies View Related#server.pl
use IO::Socket;
$| = 1;
$socket = new IO::Socket::INET (
LocalHost => '10.100.207.13',
LocalPort => '5000',
code....
it displays the message "couldn't connect to the server". How can i connect to the remote machine using tcp socket?
I've set up a PC installed with Ubuntu 11.04 on my home network, given it the name "server" and given it a static IP of 192.168.1.200. I've created a file in the home directory called "Public" and set it to be shared with everyone, basically a chmod 0777 situation. Now, how do I connect, or map out that folder from another ubuntu 11.04 machine? I know how to do it in Windows, just hit "run" and type in "\server" and blamo, I can see everything that's shared on that machine. I can't figure out how to do this with Ubuntu.
View 5 Replies View RelatedAt school can connect to my computer via SMB/Samba and VNC from the Windows Machines, but not by hostname (I still cannot VNC in at home on my desktop computer and have yet to try Samba there because I wanna setup Samba there from the comfort of my laptop and therefore need VNC first). How come I cannot access this machine by it's hostname?
View 4 Replies View RelatedI followed mjmwired's setup instructions of samba and it WAS working. Saw the share and the printer on the linux box. Move files from the linux machine to Vista machine without problems. I can get the share on my linux box using the linux machine.
I can not not search or connect to a share on the Vista machine from the Linux machine.It seems like there is something that has changed on the Vista machine.
Is it possible to forward X11 from Windows to a linux machine? Such as, running MS office or other software that runs on windows to your Linux desktop?
View 5 Replies View RelatedJust installed Ubuntu the newest release on my laptop . Im dual booting on my laptop. Vista or Ubuntu. I gotta say I love Ubuntu more than vista. I would much rather use ubuntu. My question is I cannot for the life of me connect to my main PC running Windows 7. Reason I want to do this is my PC running windows 7 has all my music which is rather large over 100gigs worth. Looks like it recognizes my PC but I cannot access anything.
Now In windows 7 I have disabled password and made it pretty easy to access files on there. When I boot into vista on my laptop no problem at all getting onto the network to access my main Windows 7 Pc. Any Ideas why Ubuntu can't get into my Windows 7 pc Through my network. Would love to do this that way I don't ever have to boot into vista. Ubuntu is great otherwise.
I have a fresh install of CentOS 5.5. I am trying to browse to the Windows machines on my network (Places > Network Servers > Windows Network), but I get a blank window. I am able to ping the Windows machines using their IP address, but not by their name. What do I need to do to be able to see the Windows machines and also to connect to shared folders on these machines? So far I have tried starting SMB (via System > Administration > Server Settings > Services). I have also tried changing my smb workgroup to "WORKGROUP" (the default was mygroup which did not match my Windows machines.
View 8 Replies View RelatedWindows 7 computer can't see ubuntu 10.04 computer. Ubuntu machine can see and access rest of windows network including a linux enabled PVR. Tried various things to no avail.When setting up for shared folders I got a message that I needed to install shared services. I did this but I only have one share through option: Unix networks (NFS). The samba option, which I should be using is not available. I tried to allow "Share files over the network" but had to install some extra service. While "share files over the network" can and has been enabled, accessing the windows network has become painfully slow and my windows 7 machine still can't see the linux box
View 1 Replies View Related`I'm on 10.04 trying to access shares on a windows machine. The machine does not appear at all in windows network/workgroup. I can see these shares when I'm on my windows partition so I know the problem isn't with the network.
Code:
sudo aptitude install apache2.2-bin apache2.2-common libapache2-mod-dnssd
I've been wondering how to see files stored in a ubuntu 10.04 machine while working in a windows vista one in a local network. the most I have gotten is to connect the vista machine to the ubuntu network but i have to copy the files to the windows computer to watch them in that computer.
View 1 Replies View RelatedIs there a way to send messages from Ubuntu to windows xp computer, like NET SEND, in Windows network enviroment?
View 1 Replies View Related