I am unable to install 10.0 over a Windows XP operating system. I receive the error "Can not mount /dev/loop0 (/cdrom/casper/filesystem.squashfs) on//filesystem.ashfs
View 1 RepliesI am unable to Install Fedora10 in my system as one of the multiple operating systems and it gets hanged after probing for Hardware devices and so ...I get fedora trademark sought of symbol and even after waiting any amount of time it doesnt go further..neither the keyboard works nor the mouse pointer moves... I am stuck at this screen shown in the installation screenshot...I get this screen however I dont get the options back or next or its that I am unable to see this options on the screen at all and mouse gets hanged and even keyboard doesnt work...
[code]....
Initially after booting with the media it doesnt even prompt me to press any key to boot from CD or Dvd or I get any screen to select the option for the mode of installation like text based installation or graphical installation..it hardly shows me this screen for even a fraction of second as well...
It takes me to the screen
1) Install or upgrade fedora
2) rescue existing installation...
3)
4) Memory test
when I click on install fedora I am taken to the fedora splash screen and nothing goes ahead... I tried in rescue mode as well... In rescue mode it asks me for language selection...keyboard layout... later it doesnt go ahead as well... I have checked the installation media and it confirmed that the installation media is good... I use Redhat 4.1 version and It works fine except for the message drivers/usb/hid.c core message received at :75 while trying to restart shutdown or access a virtual console... Along with Redhat and while trying to install fedora I have windows server 2008,Windows vista on that harddisk...
Will a Linux operating system lose data during a power failure as does a Windows operating system?
(If yes.) This has not come up before but I'm going to be doing some work I don't want to lose.
Could you either point me to a backup tutorial or give me the quick overview of preserving stuff with Ubuntu?
could any one tell me about the uses of linux operating system compared to windows operating system
View 6 Replies View RelatedWindows XP is installed in my C drive. Can I install an another fresh copy of Windows XP or Linux or Windows 7 in same C drive without formatting the previous one?
View 4 Replies View RelatedSo I was installing 10.10 to be my only operating system on my 3 year old custom built computer and all of a sudden it stopped working at the point of "whenever you are ready" but not letting me go forward because it still was loading. I waited a long time and it was frozen so I restarted my computer and now I don't have anything on it. No operating system at all. Except the symbol " _ " blinking rapidly. Nothing is working and I just want to run 10 on my desktop
View 7 Replies View RelatedI have a fresh install of Maverick on a Toshiba r700 laptop PT310A-05N011. I am experiencing constant freezing. The computer will without warning completely freeze. Can not move the mouse or even drop to a tty shell. After about 5 seconds the fan will spin up to full speed. I then have to do a hard shutdown. Every time this has happened i have been connected up to a wireless network with firefox open while actively surfing the net. This issue did not happen before I installed the wireless driver (Broadcomm proprietary, downloaded through ubuntu Additional Drivers).
I'm not sure how relevant that is though as 90% of what i do on this laptop is surfing and i installed the driver a few hours after install. This freezing does not happen in windows 7 and I have left it running prime95 overnight once in both 7 and ubuntu without error. Does anyone know what this may be, how i might resolve it or steps I can take to diagnose it, logs i can check?
I've decided to move to Debian because I have noticed Ubuntu releases getting progressively more unstable.I am following the official Debian installation guide. Just did this with the Debian 6.0 Net install .iso: 4.3.1. Preparing a USB stick using a hybrid CD or DVD image. Debian CD and DVD images can now be written directly a USB stick, which is a very easy way to make a bootable USB stick. Simply choose a CD or DVD image that will fit on your USB stick. See Section 4.1,Official Debian GNU/Linux CD-ROM Sets to get a CD or DVD image.
Alternatively, for very small USB sticks, only a few megabytes in size, you can download the mini.iso image from the netboot directory (at the location mentioned in Section 4.2.1,Where to Find Installation Image).The CD or DVD image you choose should be written directly to the USB stick, overwriting its current contents.
I'm trying to install Ubuntu 10.04 (32 bit)on my laptop (where currently is installed the amd64 version of Ubuntu 10.04 that I've decided to remove because of some small issues).I've tried using the installation CD (the same I've used to install it on my desktop, so I know that is a working copy),but at boot, although I select to boot from CD, the Live version doesn't start and Ubuntu 64 is run as usual.I've tried to create a startup diskon a usb pen,there the live version seems to start but then Busybox 1.3 is loaded and there is an error with initfrm saying that no operating system can be found.I've been told to download the alternate edition, but I'm still downloading it,
View 3 Replies View RelatedI'm trying to install debian and when the installer starts it UEFI at the top, instlal completes however on reboot it says 'no operating system found' i've read it can be because of UEFI but I have tried different bios options but to no avail.
Bios options
Sata mode: AHCI/IDE (haven't tried IDE yet)
Tried various combinations of the below
CSM: enable/disable
Boot Priority: Auto/legancy first/uefi first
Quick Boot: enable/disable
Boot up Num-lock Status: on/off
Can you install a linux version on a computer that has no operating system pre-installed i.e wiped hard drive
View 2 Replies View RelatedI want to try Debian on my Asus Eee netbook and I'm trying to follow the instructions in URL... But just copying the ISO file to the USB drive then trying to boot from it doesn't seem to work. I just get "Missing operating system".
The Eee can use an external optical drive as well but that failed also. I'm sure I need to do more to prepare the USB drive or CD? Can I prepare the USB Drive or CD on my Windows system, and make it boot on the netbook (which has another Linux distro on it now)?
I have installed Fedora 10 on a Dell M6400. It has 2 disks in a mirror raid. It came with Windows Vista, but I am not doing a dual boot setup. I have formattet the disk with this installation.I downloaded http://ftp.crc.dk/fedora/linux/relea...0-i386-DVD.iso, burned the DVD and did the install check. It passed the check.The installation went fine, but after the first reboot I am getting "Missing operating system".
I have no idea where to begin... Could the installation media be faulty after all? I there anyway to get passed this, without reinstalling? I know this may have something to do with the boot loader, but I don't know anything about it.I have installed Fedora 4,5,6,8,9 and this never happened to me before, but then again, I did all these installations on my old Dell Latitude.... Could this have something to do with the new hardware?
The issue I've been having is vague so I'm unsure if anyone can help me but it's worth a shot. The other day I was booting my laptop and this is what ended up happening and has continued to occur on successive boots:[URL] Each time it boots this is how the screen is characterized. For example: [URL] After this, continuing the boot process, the screen does this--which makes sense since the Kubuntu boot screen is this color and this where it should typically appear (I installed Kubuntu some months prior to this issue.): [URL]
After this screen, the monitor goes blank and becomes unresponsive. It usually flashes to black and then appears to turn on--becoming a slightly lighter shade of black.
Then, nothing. I can't go into tty. I've tried booting with a live CD but the issue persists and hangs, saying: soft lockup cpu 0 stuck for 61s. I've tried taking my laptop apart but I'm not familiar enough with hardware to do anything productive.
I want to experience Ubuntu and want it on my machine. I currently have Windows 7 installed and was wondering what the easiest or best way is to install Ubuntu so I can choose to run either Windows 7 or Ubuntu.
View 4 Replies View RelatedI installed LinuxMint on an external harddisk. I shutdown the laptop and removed the external harddisk. Then when I restarted the laptop (external harddisk was not attached).
Error: No such device <hex number>, Grub Rescue>
The laptop showed me the above stated error. Now I am not able to boot any OS on it until I reconnect the external harddisk!
I recently installed Ubuntu Netbook Remix (10.04) on my brother's Acer Aspire One (751h) netbook, set up to dual boot with XP Professional. The initial install was successful, with both OS's booting correctly. However, after a series of updates and module builds (this machine has the Poulsbo chipset, still somewhat of a mess), Grub2 is now unable to boot XP, displaying the error "Operating system not found."
To be clear, grub works properly (aside from not booting XP), so the MBR is intact, although I've rerun grub-install to be safe. Restoring the windows MBR (using testdisk) boots XP happily, but of course ignores the ubuntu installation. I also had testdisk rebuild the NTFS boot sector, to no change - grub still doesn't work, the windows MBR does. Using the grub console, I can "root (hd0,1)" and see files on the XP partition, but "chainloader +1; boot" again fails with the same error. The ubuntu install can likewise mount the NTFS partition with no problems.
Given the fact that switching the MBR fixes the issue, I'm suspecting a Grub2 configuration problem. However, the simplicity of "root (hd0,1); chainloader +1; boot" leaves me stumped as to what that could be. Also, the error text "Operating system not found" is suspiciously identical to my BIOS's error message when attempting to boot from a non-bootable medium (as I found out while attempting to make a bootable usb stick with my mac).
Is their a user friendly linux operating system to replace windows pc?
View 4 Replies View RelatedI want to copy a windows operating system dvd to a usb flash drive. (I want the flash drive to be bootable under windows).
View 2 Replies View RelatedSo I wanted to install ubuntu on my pc along with Windows XP (I also had vista, but it did not survive motherboard replacing I burned the LiveCD and booted from it. I chose to try ubuntu. After few minutes of playing with it I started the installer from the icon. I tried the "install alongside with other operating system" option, but I how could know what it will do? There is almost no information in that window. I have two 750GB hdds. sda with big partition over whole space and sdb with two partitions (Vista, and 40GB for Windows XP), but the installer shows only a small strip with ubuntu sign with no readable information! My sda has only 8GB of space free, so would it resize the partition to be 8GB smaller and make new partition for Linux there? On sdb it does not show my two partitions from some reason, but just one big labeled Windows 7 loader, so what would it do there? Delete the WinXP partition? Not a clue because there is no information visible in that supersmall strip with ubuntu sign on it. Just that there are some partitions hidden.
Mouseclick or mouseover do nothing. OK so I changed to the "manually specify partitions" mode to be sure what it does...And now what? I decided to shrink my WinXP partition and let the installer use the empty space, but what a surprise? It does not know what to do with! "No root file system is defined". OK so I fired up firefox and surfed a bit to know what partitions are needed. I then made ext4 partition and swap partition (not a clue how big they should be though : But there is again that message about no root filesystem! OMG so then I somehow figured out I have to assign a mount point / to it, but why there isn't any tip or info that this must be done remains a mystery for me. OK so the installation finally started and I thought that it will be OK at last. But guess what happens! No GRUB boot menu appeared but there was a blank screen for a strangely long time and then the computer rebooted again and then Windows XP started right away! WTH? I guess installer failed to change MBR or something.
OK so I booted from LiveCD again and now what... There are some guides from 2006 to be googled, but when I typed grub into a console it said it is not installed! This is great.Now I crossed a point where no BFU would ever dare to go I said to myself :- When I used the command to install grub it told me it will uninstall grub-pc package. What is grub-pc? Typing grub-pc does not do anything. Is it even possible to install something when running from a LiveCD? The crazy story does not end here. I thought that I will install it again and risk the first option "install alongside with other operating systems", if it will have any more luck with GRUB. So I did that on sdb and it took crazy long time.
I was so afraid what it was doing, but it was probably shrinking my big Vista partition.Then it was installed and what a surprise - I booted right into Windows XP again You probably think I am a masochist if I keep trying so many options desperately, but I frequently help my friends with pcs so I am glad I can test all options and be prepared for anything Now I reinstalled the system again while I was writing this and I will try to figure out how to fix that damn GRUB so I could boot into Linux
I have a IBM T30 with 40 GB HDD and an Win XP system installed. I have just deleted the partion with Ubuntu 8.04, which was installed alongside Win XP as dual boot. I can see on the internet [URL]... that I should be offered the option: - Install alongside other operating system However I am only offered: - Erase and use entire disc - Specify partitions manually (advanced) What is wrong?
View 1 Replies View RelatedI'm currently switching to a new laptop that will be my main machine and currently I use a laptop and a desktop on a daily basis. The laptop will continue to be used by another member of my family but the desktop will no longer have any use (well I might later build a new desktop but this one has finished his service).
The machine in question has:
AMD Athlon 64 3800+ @ 2.4GHz
4x512MB DDR-400 (2GB Total)
Seagate 200GB SATA 7200RPM 8MB Cache Hard Drive
Geforce 6600GT 256MB GDDR3
Since I will no longer use it as a desktop/working machine I'd like to set it up as a home server. However I can't decide which OS to use for that. I have access to all Windows Versions since XP/2003 (with the exception of Windows Home Server) and I have some knowledge using both Windows and Linux so that's not a problem on my choice.
[Code]...
I've come across this rare issue, I have a friend that uses some software that is particularly slow in Windows 7, the best compatibility is in Windows XP, I told him to make a partition and have both OSes in the computer, at which he replied: "Could I have a different OS for each user?", it seemed like a good question to me, so is that possible?, suppose that I login and it boots me to Vista, then I loggout and Linus Torvalds comes and logins and boots him into Ubuntu, he gets bored and logs out, afterwards my friend comes and logs in, booting into XP, summarizing:
The operating system that will be loaded will depend on the user that logs in.
I wished to know if I can install windows 7 on my system when I am already running Linux Mint 10(as the only operating system on my machine). That configuration is called a dual boot. If you install Win7 first (or it is already present), THEN install linux, you will find that grub notices both and you will not need to mess with the MBR. The better solution is to load mint, add VirtualBox, and install Win7 into a virtual machine. Then you get to run Linux and Windows AT THE SAME TIME!
View 4 Replies View RelatedI have a query related networking .
I want to know how to connect from a server which is operating on a windows os from a linux machine using ssh
Actually i've packages to show my ntfs partitions on my red hat linux but i 'm unable to install these packages. how can i install the packages
View 2 Replies View RelatedAt work I'm using a windows box with local and network drives. One of drives I have mapped is my Linux home directory (We have separate windows and linux accounts and home directories here). When I view it from windows, all of the files and folders beginning with . are shown, as would be expected. (Although . and .. aren't in any folder)
Just wondering if there is a way to tell windows to not show anything starting with a dot. I was hoping there's a registry entry or something that defines what a 'protected operating system file' is, so I could put dot files in the same category as thumbs.db etc.
I was wondering if there is some way to determine when a file finishes writing to a directory on both Windows and Linux (obviously, they will probably be two different commands). This is mostly so that, instead of constantly polling a directory for new non-temp files, I can set up a program to simply listen for the completion of a write-to-disk (it seems better to do things that way).
View 3 Replies View RelatedI cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....