I have a Fedora 11 into a virtual environment (ESX) I remove all interfaces but with the command system-config-network I see my previous configuration How can I remove/clear all my network configuration to start another time to config?
View 9 RepliesI was playing with my debian server when something went totally wrong while i was editing something on my network interface,i removed those crap that i wrote and left the network interface configuration as it was
Like for example after re-editing my network interface,it was like :
As i did a network restart, i get this error saying :
There is already a pid file /var/run/dhclient.eth0.pid with pid 2802 killed old client process, removed PID file.
What is this error and how can i fix it,because every time im re booting my server i lost my network config.
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies View RelatedI have just installed Debian Weezy and for some reason it just does not see my router.1) is there a good network config script I can use?if not then what files must be edited to setup the network?When I attempt to ping the router, it does not see it. I have checked the cables etc.
View 6 Replies View RelatedI'm running Debian Etch AMD64, and currently trying to clean up my system in preparation for an upgrade to Lenny. One problem I have is that resolvconf (which is installed) does not start at boot time, but if I start it manually then bring the NIC down and back up, it works OK, with no error/warning messages.
View 9 Replies View Relatedso as my title implies I like to login to my headless debian box after it reboots yet havent found any info on that. Can someone please tell me of script which I suppose would be used to make vino start as a process right after boot
View 2 Replies View RelatedI am running Debian-Squeeze with apache2. However, apache2 doesn't start at boot time, even though there is of course the required script in init.d. I can start it later on using "/etc/init.d/apache2 start". I have checked the configuration with "apachectl configtest" - giving the answer "Syntax ok". How do I get it to start automatically at boot time?
View 1 Replies View RelatedI like to login to my headless debian box after it reboots yet havent found any info on that. Can someone please tell me of script which I suppose would be used to make vino start as a process right after boot.
View 3 Replies View RelatedWhen I install the FC11 by using"Install or upgrade an existing system"or"Install system with basic video driver"mode...Point 1, I can't config the network config ( IP Address ), due to theerror of network manager...Point 2, I can't enter into the text mode to do the installation steps.Remark:The machine is provide Web,DNS, and Mail Server on the NET ( Internet )
View 1 Replies View RelatedNo more than 15 hours after a breezy installation and setup I somehow managed to stop the desktop manager from displaying. Once you boot into Suse, the loading bar goes across, a white flash, then a blank screen forever. I figured it was KDM once I booted into x11safemode and tried to boot the desktop manager, it recreated the situation.
I've tried un-installing and installing KDM again, however it seems to reuse the same config file. I'm thinking about deleting the config file mentioned, but I'm not sure what will happen when I install the desktop manager, if there's any setting up to get it to work with my setup, or even if that will fix the situation.
In the right upper corner of your screen,you can see if you have a network connection or not.Most of the time I do not have one according to Networkmanager (?).So I have to enable my wired connection manually.I already tried a lot to change my settings so I would have a network connection at boot,but it doesn't seem to work....Firefox is in Offline modus when I logon..
View 2 Replies View RelatedI had put in a broadcom 4318 (airforce) card and it showed up in network tools as wlan6 with multicast disabled, inactive, and etc. the bf cutter tool also showed up in hardware drivers.
However, after trying to get the card functional - it no longer shows up in network tools nor is bf cutter in the hardware section.
I tried installing broadcom's proprietary driver among some other solutions. I'm running karmic 9.10.
How to start with a clean slate and get my wlan6 to appear again, so I can install this proprietary driver or use driverloader?
I have a concern regarding my clock in fedora 12. It always changes time even when I do not change it.
In fedora 10, I to go to CLI > time config > uncheck UTC, But now, it doesn't seem to work. Code: [jun@localhost ~]$ time config
Command not found.
real0m2.875s
code...
I just installed F13, and many things have changed (was using FC4!). When I restart my network, my NIC card does not come back up with the correct info, and for the life of me, I can't figure out why. Here is the NIC info for eth2 when things are correct [Replaced the MAC address due to paranoia, but it's correct on my machine]:
Code:
eth2 Link encap:Ethernet HWaddr 00:00:00:00:00:00
inet addr:192.168.2.1 Bcast:192.168.2.255 Mask:255.255.255.0
inet6 addr: fe80::baac:6fff:fe8e:57d2/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
[code]....
Here is the cfg file:
Code:
# Broadcom Corporation NetXtreme BCM5722 Gigabit Ethernet PCI Express
DEVICE=eth2
NAME="System eth2"
[code]....
How do Stop, clear and restart Network Manager in Ubuntu 11.04 Classic Desktop?
View 2 Replies View RelatedWhile i'm installing few rpm packages using yum i got missing dependency error. So how can i clear that error and how install successfullly.
View 3 Replies View RelatedI want to reinstall "system-config-network" in Fedora10. I have now system-config-network 1.5.95 and I want to have system-config-network 1.4.3 (it is from fedora8)
View 3 Replies View RelatedI've been running F10 since it first came out, and I was happy to see it was the first Fedora release that automatically recognized my Atheros wireless card. I have to run system-config-network and press the "activate" button when I start the machine, but that's ok and no big deal. But today, for whatever reason,in system-config-network, the "activate" and "deactivate" buttons are grayed out and I cannot start the device so I have no network access. When I boot the machine into Windows, it works fine.
View 2 Replies View RelatedUsing xubuntu 11.04, how do I maually give myself a static IP address and other IPv4 settings? I see the edit connections panel and saved a setting there but can't see how to use that setting. The only useable setting when I'm connected by ethernet is Auto eth0.
View 3 Replies View RelatedA friend has a website. the site has been moved to another server. I am inside of a private network.
Problem: when trying to reach his website, my browser keeps connecting to the old server which is on another continent
Windows machines have no problem with this. They connect to the new server without issues.
NOW what is hard to understand: even the PING utility is pinging the old server.
I tried these and none works:
- computer restart
- Clear private data in Iceweasel (has ntg to do with PING, but tried...)
- installed nscd and restarted the service
- modified /etc/resolv.conf to point to another nameserver than modified it back
At the same computer, if I reboot and load Windows, the browser has no problem connecting to the new server.
I installed the latest Debian on a computer to make a backup appliance. No GUI.When the computer starts, everything is okay. The DHCP client is running, the network interface have an address, fine.If I do a /etc/init.d/network restart (or stop + start), no more DHCP client. t is stopped when the interface is down. When the interface is up, I have to start it manually.1 - is it normal ?2 - isn't ifup's job to launch the dhcp client ?3 - can /etc/network/if-up.d be the right place to resolve this ?
View 4 Replies View RelatedI was trying to set my wireless to start up when the computer is booted like the regular ethernet eth0 but I can't figure out how to set the WPA pass phrase with system-config-network
View 2 Replies View RelatedMy old /etc/network/interfaces isn't working in 9.10. I've used it from 8.04 to 9.04 without issues.
I need to make multiple configuration per interface:
Code:
auto lo
iface lo inet loopback
auto lo:1
[Code].....
If not how can I downgrade the program responsible for reading this file?
I'm having problems with networking. I just installed Debian 6 SServer LAMP and it didn't autoconnect to internet. I plug in the internet to my eth0 (default) port, and I keep getting timeouts. I found that dhcp3-client was not installed and fixed that. My etc interfaces has this for eth0: Auto eth0 Iface eth0 inet dhcp What other packages or config do I need to make the internet work? It's missing something basic that wasn't setup properly. I do get the correct dns address to my isp provider when I check etc resolv.conf. It just can't dhcp discover.
View 1 Replies View RelatedI've used Samba for several years and when it works it's great. Unfortunately from time to time it seems to get messed up and either all the 7 machines on my home network can't be seen or I can't access the shares on some. I have 2 Windows XP computers 4 Kubuntu and one Linux Mint KDE, all the latest versions. I'd rather not plough through all the documentation for Samba, but would really like a "model" smb.conf with a few comments about parts that might have legitimate variants. I have researched this with Google searches many times but have failed to find the information I need in concise form.
View 4 Replies View RelatedArpwatch is failing to start at boot time. I got this message:
arpwatch: bad interface eth0: eth0: no ipv4 address assigned
Once I login into my account, I can (as root) run the arpwatch demon, but it is suppose to run at boot time. After I installed aprwatch, it was working correctly. I do not have an idea of what happens or since when the problem start to happen. I just realize, after a while , that arpwatch was not running. I am running Fedora 12 - 2.6.32.9-67.fc12
I just recently installed ubuntu server. I want to be able to install packages and such but can't until I connect to Internet. I tried wifi but couldn't figure out how (I'm a n00b) but now I have ethernet and can't figure out how to make it work. So my question is, how do I connect to my Ethernet with ubuntu server, I could if I had graphical, but I can't get that until I have Internet. I didn't configure network during install, so how do I do it now?
View 3 Replies View RelatedCannot activate network device eth0!"device eth0 does not seem to be present, delaying initialization".i cannot find my network card while i set up network configuration Now I use dual boot window 7 and fedora 9,I cannot find my network card in select network adapter while network configuration ,i have a network card Atheros AR8132 PCI-E fast Ethernet controller NDIS(620)and for wired in Accer laptop .
View 1 Replies View RelatedI have ovpn configuration files for Windows from SwitchVPN. They do not provide configuration files for GNU/Linux. They said I can extract the certificate and key files from the ovpn files, but I'm confused about how to do that.First of all, I don't know which Authentication Type to choose: "Certificates (TLS)," "Password," "Password with Certificates (TLS)" or "Static Key."
Second, I don't know what to put where from the ovpn file. I see a <ca> � </ca> section and a <tls-auth> </tls-auth> section, but I don't see how those correspond to any of the Authentication Types. "Certificates (TLS)" and "Password with Certificates (TLS)" require two certificates and a key, "Password," requires one certificate and no key, and "Static Key" requires a key and key direction but no certificate. When I connect to SwitchVPN in Windows, it asks for a user name and password.Here's an example of the ovpn files (certificate and key contents removed):
Quote:
route-delay 3
fast-io
client
dev tun
[code]...
how to get what I need from the ovpn files, and which Authorization Type to choose in the Network Manager VPN configuration GUI, and what to put in the blanks?
This is not exactly Ubuntu question but i don't know where else to ask. I'm trying to setup a Wireless Linux router. My ISP provides multicast IPTV. I've got the whole thing setup'ed with igmpproxy and hostpad. On wired connection IPTV works flawlessly, but on wireless connection IPTV glitches badly and router start to time out. My wireless card is DWA-552 I'm using ath9k driver. More info in my post on LinuxQuestions.org Did anyone tried to setup Wireless Router with IPTV?
View 3 Replies View Related