I like to login to my headless debian box after it reboots yet havent found any info on that. Can someone please tell me of script which I suppose would be used to make vino start as a process right after boot.
View 3 Replies
so as my title implies I like to login to my headless debian box after it reboots yet havent found any info on that. Can someone please tell me of script which I suppose would be used to make vino start as a process right after boot
View 2 Replies View RelatedKernel: Linux 2.6.26-2-686 (i686)
Compiled: #1 SMP Thu Nov 25 01:53:57 UTC 2010
C Library: GNU C Library version 2.7 (stable)
Distribution: Debian GNU/Linux 5.0.8
Desktop Environment: GNOME 2.20
Gnome comes with Vino Remote Desktop as part of it's package. I want Vino to run at boot so that I can login remotely.I am using VNC-4.1.3 for remote viewing. However, I can only view remotely once I have logged-in locally
Kernel: Linux 2.6.26-2-686 (i686)
Compiled: #1 SMP Thu Nov 25 01:53:57 UTC 2010
C Library: GNU C Library version 2.7 (stable)
Distribution: Debian GNU/Linux 5.0.8
Desktop Environment: GNOME 2.20
Gnome comes with Vino Remote Desktop as part of it's package. I want Vino to run at boot so that I can login remotely. I am using VNC-4.1.3 for remote viewing. However, I can only view remotely once I have logged-in locally.
how can i execute vino-server at boot time, before my graphical login prompt (gdm ?) appears
View 1 Replies View RelatedI'm running Debian Etch AMD64, and currently trying to clean up my system in preparation for an upgrade to Lenny. One problem I have is that resolvconf (which is installed) does not start at boot time, but if I start it manually then bring the NIC down and back up, it works OK, with no error/warning messages.
View 9 Replies View RelatedI am running Debian-Squeeze with apache2. However, apache2 doesn't start at boot time, even though there is of course the required script in init.d. I can start it later on using "/etc/init.d/apache2 start". I have checked the configuration with "apachectl configtest" - giving the answer "Syntax ok". How do I get it to start automatically at boot time?
View 1 Replies View RelatedI have a fileserver running debian 6 and I would like to be able to remote control it over VNC. I have enabled Remote Desktop in Gnome and it works, however I have to be logged into Gnome for it to work. Gnome doesn't enable vino before a user is logged in for some reason. This presents a problem as there is no keyboard or mouse connected letalone a screen.
I looked up the issue on google and found this: [URL] Long story short, I have to edit /etc/gdm/Init/Default and insert "/usr/lib/vino/vino-server &" just before 'exit 0' at the end of the file, and change "KillInitClients" to "false" in /etc/gdm/gdm.conf. I edited the first one as it says, but I can't find gdm.conf anywhere. I did however find a 'daemon.conf' in the /etc/gdm directory, and added the line there.
When I try to connect after doing the above, my vnc viewer (client) just disappears - no errors, message, sound - nothing. It doesn't even ask for a password. I checked the comments in the link, and the second to last comment suggests it's because of some negotiating-issue which should be an easy fix:
Turned out I had to enable connections to vino not related to my user account. To do this run sudo vino-preferences and duplicate the settings instructed here
I am using Debian4 and I have apache under /home/apache/bin/apachectl How to start the apachectl service for every time system restart, Itmust be start automatically. Please tell me how todo or how to write the script, how to configure forrun level 2,3 and 5
View 6 Replies View RelatedI have two partitions in LVM. They are added in /etc/fstab to mount automatically. But, they are not working. The process to mount partitions seems to be happening before the service /etc/init.d/lvm2 is started. I can get it mounted using "mount -a" command, but not during the boot time. What should I do get it automatically mounted on every boot?
View 5 Replies View RelatedA windows server named SRV is sharing folders for each users in /share/From a Debian computer on network logged with the user session "foo" I can mount the remote directory /share/foo with:smbmount //SRV/share/$LOGNAME /remote_directorythen the prompt ask me for password and when I have gave it the remote directory is mounted correctly.Now I would like to make this at boot time.If I put the same command in the .bashrc, when I boot, the remote directory is not mounted when the session is opened but then if I open a console, it ask me for password and the directory is mounted.This way is not convenient and it would be better if the directory is mounted when the user open his session and using the same password.The point is that every user should have a his own remote directory mounted when the session is opened.
View 2 Replies View RelatedOn Debian Etch I used to understand how to change boot kernel parameters with Grub. You could just edit menu.lst.
With the newer Grub in Squeeze I am without a clue! I want to set up a ramdisk, say 128 Megs in size, and add that to my boot parameters so that it is created every time the machine starts. Do I set something in /etc/default/grub ?
I'm trying to stop all boot time messages from appearing -- basically I'd like to have a simple blank screen from grub to xdm.
I tried everything -- used the "quiet" option in grub's config, added dmesg -n 1 to rc.local, changed console=ttySx, set kernel.printk in sysctl.conf to 4 1 1 7, and even eradicated rsyslogd altogether... to no avail. I still see all sorts of messages on my screen.
Since recently statd at the boot time takes, more then 30s or even more.
It is laptop configuration, no NFS server(?) lenny with few installs from backports (open office and .30 kernel - for Intel 5300) vmwware (7), as well firestarter firewall
Can I disable it or change the boot order (via sysv-rc-conf ), so I can speed up my boot time?
Running Debian stable. I added the following command to rc.local and made it executable:mount -t cifs -o username=ted,password=computer,uid=mooreted,gid=users "//192.168.1.121/Storage Volume" /mnt/vortexAfter rebooting dmesg throws the following error:
[ 21.400697] CIFS VFS: Error connecting to IPv4 socket. Aborting operation
[ 21.400708] CIFS VFS: cifs_mount failed w/return code = -101
However, if I run the command as root after the system boots it works fine.Been using this method on other distros for over a year. No idea what the problem is.
I know that boot partition is possible to create within debian distribution that has grub 2.0, as I have done before with ubuntu. I have been trying many different options with my preseed file but it keeps taking the boot partition out of LVM and creating and extended partition too and then creates the LVM primary partition.
### Partitioning.
# you can specify a disk to partition. The device name can be given in either
# devfs or traditional non-devfs format. For example, to use the first disk
[code]....
I am struggling to find out how to start the connection to my VPN on boot?
View 1 Replies View RelatedI have a bash script that starts gammu, which I would like to start at bootup. But how do I accomplish this the best way ?
One way is to do it like this
Copy the file to /etc/init.d/
chmod +x the file
update-rc.d scriptfile start 20 2 3 4 5 . stop 20 0 1 6 .
But is there a better way ?
How can I change the automatic fsck execution at boot time to be above 30 boots? I reboot the system sometimes 3 to 4 times a day. Intel 3 GHz, tower, i386 lenny vmlinuz-2.6.31-686
View 2 Replies View RelatedI have a debian 8.1.1 server running owncloud and a proxy server at home. I have everything working fine, with one exception. The proxy server won't start on boot. If I ssh into the server, then run "sockd -D" as root, it starts up and runs just fine. Any guides I find refer to the init.d script method that worked in Wheezy, but that isn't working. I think it has to do with Jessie switching to systemd? I had used someone elses script in init.d, and ran update-rc.d, but it still doesn't start.
With Jessie, how can I make "sockd -D" execute on system startup?
I am very pleased with a new Squeeze desktop that I built. I am use to using BSD style init scripts (Slackware, OpenBSD, Arch) and am trying to tweak my system not to start vsftpd at boot. I use vsftpd occasionally to move large files between computers on my LAN. My inittab shows run level 2 as default.
View 3 Replies View RelatedI have just recently installed firestarter to get an idea of iptables editing with a GUI. Firestarter works great and I love it, however when I turn my system on, and my system is booting up the terminal displays a "Failed" message when attempting to start up firestarter. Now I have been doing my homework (reserch) and have read that a user will get this error because firestarter trys to load prior to the network manager starting up. I have also read some other variables that can cause this is if you use network manager and have a password on your user account (which I do have) can cause this issue.
However in most cases from what I have read is even though it gives the user a "Failed" startup message, once the user logs in, and is connected to the internet firestarter will actually load the iptables. I did some tests and from what I understand I can see that this is true because I have allowed access to certain torrent trackers, and denied access to others, and I can see some come online. Does firestarter load iptables once the user logs in? Or once it fails to load, does it not load at all unless you manually open/load the application. If firestarter just modifies iptables, then once I save my listings in firestarter then I really don't need it to start up correct?
I have recently added a second screen and uses separate X screens as my x screen settings. No xinerama. After adding the display Vino refuses to start. IIRC using dual X screens with xinerama works as expected.
Starting it manually results in code...
Is it even possible to use vino with two server-side x screens? I would be perfectly happy with only one X screen exposed via VNC if it is impossible in the VNC client to choose which X screen to connect to.
I have a Insprion 14R (N4010) and when I hibernate it will usually restore without a problem, but maybe 15% of the time it will reboot while loading. I would like to figure why, since I'd rather not lose anything... My swap space is 5.9GB, I have 4GB RAM (video uses 1gb, so I have 3gb usable)
lspci says
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
00:16.0 Communication controller: Intel Corporation 5 Series/3400 Series Chipset HECI Controller (rev 06)
[code]....
I do have the hibernate package installed...
I have recently added a second screen and uses separate X screens as my x screen settings. No xinerama. After adding the display Vino refuses to start. IIRC using dual X screens with xinerama works as expected.Starting it manually results in code...
View 7 Replies View RelatedI am *finally* getting around to rebuilding my file-sharing computer. I'll be sharing files with both Linux and Windoze machines. It's a home network, so there's nothing fancy needed. I know I have to tweak my smb.conf file until I'm satisfied with the features and security. I'm using SWAT and I'm starting with a bare-bones conf file. It's not secure but I can see the server and selected files/directories from my other Linux box.
My really dumb question is, do I have to reboot both the server and the client machines every time I change the SAMBA configuration? I thought I just had to stop and restart the SAMBA service in the SWAT software - but then the server disappears from my client. It looks like I need to reboot both machines for the client to see the server.
I have a Fedora 11 into a virtual environment (ESX) I remove all interfaces but with the command system-config-network I see my previous configuration How can I remove/clear all my network configuration to start another time to config?
View 9 Replies View RelatedI build and use a custom kernel, and use the nvidia driver. This is on debian stretch.
By default, I build the image and headers packages with this line:
CONCURRENCY_LEVEL=8 nice -n19 ionice -c3 fakeroot make-kpkg --initrd --append-to-version=-something --revision=1 kernel_image kernel_headers
These kernel sources are usually the sources from debian, with a couple of more patches that I add. It appears that for nvidia-driver package versions higher than 352.79-1, the kernel headers/sources need to be prepared with 'make prepare' and 'make prepare scripts'. It's that simple. I concluded this after the nvidia dkms build failed on my custom kernel, but then succeeded after I pointed it to the full sources, but only after running 'make prepare' and 'make prepare scripts' on them. The problem is that this make-kpkg scheme doesn't appear to do this, or if it does, it doesn't properly include in the headers everything that it should.
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies View RelatedI do this every time.
Code:
ifup dsl0
How can i set this to start at boot time?
