Installation :: Fedora 15 Doesn't Boot / What To Do?
Jun 2, 2011
I was a windows user and am new to unix. I did not want to format the drives as I don't want to lose any data. Installation was successful but I am taken straight to Windows OS selection screen.
Here are some data that may be helpful:
HDD: 2TB partitioned to 9 drives ( 1 ext4, 1 swap and 7 NTFS drives) code...
I tried fixing grub, but when I type "root (hd0,11)" , it says - it has exceeded the cylinder limit of BIOS. I need help in getting fedora up and running.
Please note that formatting or altering the current drive structure is NOT an option for me. I bet there is a work around to this problem.
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
I created a Fedora 13 x86 live image on USB using [URL] I've set it to boot using the USB and when it does I see the 10 sec countdown (or the options if I press a key), I tried all the options to boot the image but the screen just turns black for a few seconds and then the the monitor goes into "power saving mode" and nothing happens (I waited like 10 minutes). What's going on? I am trying to install fedora into an empty (secondary) HD, in the main HD I only have a win XP, and I don't want to burn a cd/dvd that's why I am trying to boot the USB.
I am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux chainloader +1 title Kubuntu 8.10 Linux
I have a /boot partition, and the online update process has downloaded the upgrade to /boot/upgrade. The problem is that grub is actually booting from a directory /boot which is in the root partition, but is invisible once the machine has booted, because the /boot partition is mounted over it. The result of all this is that the upgrade option does not appear in the boot menu, because that option has been inserted in the menu.lst (or grub.conf) in the /boot partition. is it ok for me to run:grub-install /dev/sda4(that's the device that contains the /boot partition where the upgrade menu option and data). Also, do I need the --root-directory option, given that the boot directory is the root directory of that partition.
iam new to linux i installed fedora 10 on windows7 ultimate 64bit after intallation the fedora system doesent boot, but windows7 work properly. i instlled fedora 10 in seperate fee partiotion
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
I downloaded the Fedora 11 KDE livecd, installed it, and after the reboot when I get to that "firstboot" screen, I can't move the mouse, the keyboard doesn't work, I have to hold down the power button to turn off the computer.
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this: - is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or - did I do something wrong in the install process? or - is this some weird bug manifesting itself?
I'm brand new to Fedora. I ran the live cd and installed Fedora. I then installed OpenSUSE and Mint. When Mint formated the hard drive, Fedora wasn't in the graphic, even though sda1 was ext4 and sda3 was lvm2. When Mint rebotted, Mint and OpenSUSE were on the menu, but Fedora wasn't.
I use Fedora 13 x86_64. Recently i installed q4 wine and booting froze with message "registering binary handler for windows applications". Then on removing q4 wine boot froze at "unexpectedly disconnected from boot status daemon".I also removed wine, smolt.
Added an SSD (dev/sdc) and decided to move some less often changed directories there. Started with /usr and /boot, leaving / on a primary in the first drive, for now. All started ok, and my changed fstab mounted the right ones, and the system works.
However, grub is actually using the original /boot on / on sda1. I cannot see any way to change this. (Which makes it sorta hard to update the kernel
From grub:
Okay, since it has two choices, I tried to tell it which one to use. But, grub> root (hd2,5) does nothing.
Disk /dev/sda:
what I seem to recall, grub doesn't care about the boot flag on the disk. Nor does it care about primary vs. logical (except GNU doc says "makeactive" only works on a primary?).
The GNU doc also indicates that it looks for a directory /boot on the partition, so if you're mounting a partition as /boot, it also needs to contain a /boot directory under it. Tried that, but no change.
Is my problem the logical partition? Does that prevent "grub> root" from changing it? I'm afraid to wipe out the old /boot and find that I can't start up.
Ubuntu 10.10 doesn't boot at all. The liveCD only boots once every like 30 attempts, installing from liveCD froze, but the Alternate CD worked and installed ubuntu. Now when I try to boot into it using GRUB, it freezes at the beginning of the boot process.With normal boot it freezes at line: Starting AppArmor profiles Skipping profile in /etc/apparmor.d/disable: usr.bin.firefox.With recovery mode it freezes even before showing me anything
A little kinda like the liveCD, if I try like 30 times, it might manage to boot once in normal mode.That line keeps on repeating, the the xxx.xxx integer changes each time, and this goes on forever.I tried removing my floppy drive, but it didn't help.I tried to boot with fd0=noprobeThe one time it booted, when I restarted, it froze while trying to restart.
I have a MSI a6000 Laptop (that has given me a lot of problems installing Ubuntu.
I finally had to run Ubuntu from a CD in nomodeset
Then when I go to install Ubuntu the only options it gives (regarding my harddrive) are to format my whole hardrive or do the partitioning. I have seen screenshots though where there is a third option on the same page to install ubuntu alongside a prior OS and dual boot.
Does anyone know why the "install alongside a prior OS (dual boot)" option doesn't show up?
I installed Ubuntu 11.04 from a downloaded CD onto an old computer. It replaced the old Windows that was on it (that is what a wanted). The machine is a AMD-64, I think the video is a Radeon.When I reboot it only gives meubuntu login: I give the name, and then the password, and what I get is the following:gilles@ubuntu:`$How do I get my Ubuntu desktop?
In my pc I have Ubuntu and Windows while Debian on external HDD, and when boot from usb opens a black screen. Have done a boot-repair test and the result is this: URL... (there isn't MBR in sdb) now I need to istall manually it. What are the commands?
I just downloaded Ubuntu Netbook 10.10 and created a boot usb stick.
My netbook runs ok from the stick (i.e. "Live CD" mode) and all seemed OK, so I went for an installation.
The install process appeared to complete ok, but when I restart the machine without the usb stick nothing happens - after inputting my power-on password, nothing at all: no disk activity or anything, just blank screen.
The netbook is an Acer Aspire One, the solid-state disk version, no hard-disk (110Ab ZG5)
I previously had the EasyPeasy implementation of Ubuntu NBR 10.04 running without problem (and NBR Karmic before that)
I'm currently having problems trying to install Ubuntu on my laptop.I have burnt off a CD that contains the latest Ubuntu 10.10 iso using the exact way the website tells me to.However, I can't boot from that CD. I can, however, boot from other CD's. For example i ran my Gparted Live CD to create a partition on my hard drive about an hour ago and that worked fine.
I've recently been trying to attempt to install Ubuntu on a partition on my macbook pro OS X 10.6.6. I have attempted to create a bootable USB stick (as I currently do not have any CD's/DVD's to use). I have followed the guide on the Ubuntu installation page twice, word for word, command for command. Everything goes flawlessly, all the files are visible on the drive when I checked, and I have never received any errors in the terminal. The problem arises when I attempt to boot from the USB, it simply does not appear under the options when I attempt to boot. I have also checked the Start up Disk under system preferences.
I have attempted the installation on two different USB sticks, and the same problem on both, flawless to install to USB, but then it is somehow not booting. I have checked with the USB company and directly from the website it says that the PNY attache is capable of this. It is the 4GB model.
I have Fedora 12 and I'm using it as a server and there's no keyboard. Everything works fine, except that I can't reboot. I can see the system coming up, but at the end it seems to stop / hang. Maybe something todo with gdm, I don't know!
I'm trying to dual boot 9.10 with Vista on an HP Pavilion Slimline (AMD64). I've tried both booting from a disk and using Wubi, and neither has worked. Booting from the disk takes me through the screen where I can choose to try Ubuntu without installing, but after selecting that, the desktop didn't load, the screen just went to black.
I decided to try Wubi, and it went well enough. Everything in windows worked, and upon rebooting, it was able to finish checking the installation. After one more reboot, I selected Ubuntu from the Windows boot manager, and then the grub command prompt appears. I can't seem do anything after that except reboot.
I have no idea what's going on with this computer.
I loaded Kubuntu 9.1 and got a mess in the Grub 2 Boot Menu, which I can't correct.
I get extra choices in the Boot menu, and the first few, which are supposedly for Kubuntu Karmic Koala all put me in a shell, which ends in a black screen, then shows up a shell once I hit "enter". Then I just have a "intramfs" (?) prompt.
So I went into Grub2 to change it, and it refuses to do it. All I get is a screen full of error messages every time I try, with no change. Apparently it is looking to access drive sdb8, which is non-existent. I DO have a drive sda8, though.
So with all the wonderfulness of the indirect system to change Grub 2 how am I supposed to set it right? The old Grub worked fine, and just took simple changes to the menu.lst file.
Can't somebody write a program that lets Grub 2 be changed from within the program, rather than all this running around trying to find what file to change, and how to get the change to work?
Just to be clear, here are the errors as they show up when grub-update is flailing around: "error: cannot open '/dev/sdb' while attempting to get disk size error: cannot open '/dev/sdb' while attempting to get disk size Generating grub.cfg error: cannot open '/dev/sdb' while attempting to get disk size
I donwload the Ubuntu 10.04 *32bits ISO image, and i burned each image with diferent speeds. Then, i tried to install, appears the Language Selection screen, all good. then, the Localization screen, I select Colombia (I'm from Colombia), clic on forward and the mouse shows the "loading animation", but the PC doesn't do anything (I let it for 30 minutes). I tried with the 2 CD, but ever the same result. And in some times when I try to out and reboot appears an error, so I have to reboot manually (with a button ).
And other problem, is that my BIOS doesn't let me boot form USB, so I can't install form USB. The last opportunity, and tried to install it, upgrading from Ubuntu 9.10, but in the instalation it gave me some errors, and in the 80% (or something like that), appears a window asking me to install GRUB AND EVERYTHING FREEZES, so I had to rebbot manually, and reinstall Ubuntu 9.10.
has anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.
I downloaded the Lubuntu 10.10 Live-CD ISO and burned it to a CD-RW disc. The Lubuntu Live-CD fails to boot on my secondary PC. It boots fine on my primary PC. The PC on which Lubuntu fails to boot is a Dell Dimension L (year 2000). Celeron 566 MHz. 192 MB RAM. That PC has Xubuntu 10.10 installed on HDD. Xubuntu runs fine. The PC on which Lubuntu boots OK is a Dell Dimension 4100 (year 2000). PIII 733 MHz. 512 MB RAM. The failing boot progresses to a point where I get a purple screen showing "Ubuntu 10.10". Underneath the "Ubuntu 10.10" is a progress bar consisting of four dots. The progress bar continually shows progress, but after a few minutes there is no HDD or CD activity. After about seven minutes I get a blank bluish-gray screen. After waiting an additional five minutes I pressed "Enter" and was returned to my original purple screen. The progress bar continued to show progress, but there was no HDD or CD activity.
I'm installing Ubuntu server 10.04 LTS in several machines with identical hardware using clonezilla.Every thing is ok except than wen starting a cloned machine, grub waits the user to make a selection to boot from.The hard disk has 3 partition:
Device Boot Start End Blocks Id System /dev/sda1 * 1 14 112423+ 83 Linux /dev/sda2 15 1059 8393962+ 82 Linux swap / Solaris[code].....
how to do to start automaticaly? This is the content of grub configuration file (/boot/grub/grub.cfg)[code]...........
I have a sandisk cruzer 4gb and everytime i try to boot with it in the usb slot it doesn't get read. after bootup i have to pull it out and put it back in and then it recognizes and reads it. have usb device selected as first boot order and have even hit esc during bootup and selected usb as boot device. trying to install the unbuntu 10.10 on the netbook.
I downloaded Ubuntu 10.10. Initially, I had the problem on the "Who are You" screen and was told that lower case letters were needed. Long story short, I was given a work-around since there was a partition on my hard drive. Ubuntu installed correctly - works just fine. However, upon booting up, if I choose Windows 7, it takes me to Recovery and wants to reinstall factory specs. What's the best way to resolve this? Is going back to factory specs and then reinstalling Ubuntu a viable option? This is brand new computer and I've downloaded nothing - wanted to make sure everything was working fine before I did that - so I would have no problem with doing that.
