Ubuntu Installation :: Lubuntu Live CD Doesn't Boot
Nov 15, 2010
I downloaded the Lubuntu 10.10 Live-CD ISO and burned it to a CD-RW disc. The Lubuntu Live-CD fails to boot on my secondary PC. It boots fine on my primary PC. The PC on which Lubuntu fails to boot is a Dell Dimension L (year 2000). Celeron 566 MHz. 192 MB RAM. That PC has Xubuntu 10.10 installed on HDD. Xubuntu runs fine. The PC on which Lubuntu boots OK is a Dell Dimension 4100 (year 2000). PIII 733 MHz. 512 MB RAM. The failing boot progresses to a point where I get a purple screen showing "Ubuntu 10.10". Underneath the "Ubuntu 10.10" is a progress bar consisting of four dots. The progress bar continually shows progress, but after a few minutes there is no HDD or CD activity. After about seven minutes I get a blank bluish-gray screen. After waiting an additional five minutes I pressed "Enter" and was returned to my original purple screen. The progress bar continued to show progress, but there was no HDD or CD activity.
I have the same problem with an Ubuntu 10.04 live CD. Whenever I attempt to boot (Lu|U)buntu from a live CD/USB, on most computers. it works just fine. However, on two computers, the live media starts off just fine with the main menu (Try Ubuntu without installing, etc.), then, when I select any option except 'Boot from First Hard Disk', after a few seconds, the CD stops spinning or the USB loses power. I'm convinced it's not a problem from the media, since it works perfectly fine on some computers.
Sysinfo: Code: Host Name: OWNER-PC OS Name: Microsoftr Windows VistaT Home Premium OS Version: 6.0.6001 Service Pack 1 Build 6001 OS Manufacturer: Microsoft Corporation
Heard good things about Lubuntu 11.04 so I downloaded the .iso and burnt a CD to have a peek. When I boot up on the CD and choose "Try Lubuntu" the splash screen shows up then it jumps to command line. I tried startx, but it didn't work.
Linux newb here. I was looking for a lightweight distro that I really like and Lubuntu was it. I installed in on all three of my comps with out issues and my old Dell desktop(512mb ram) is flying now. Way faster than XP even right after a fresh install of both on the same desktop. On my fourth install, my girlfriends old toshiba laptop, it installed fine. After the restart and reboot it gets to the Lubuntu logo with the 5 dots under it. It gets through 4 of the dots then freezes. I left it for 20 minutes and it was stuck.
I tried booting from cd again and check disc for defects. It said it found 2 files with errors, press any key to reboot. Which I did and it just booted right back into the freeze. Maybe since I have to manually make it boot from cd every time it was wanting to boot back into the CD after the disc check, I'm not sure. I tried burning a new iso on a slower speed, same thing for a total of 3 reinstalls with the same effect. The only thing different about this install compared to my others is:
A) I had to flash the bios from windows before I started to even get the damn thing to be able to boot from CD
B) I decided to just wipe XP and install Lubuntu on the whole drive.
I bought a magazine because it said it had lubuntu on its disk. <i popped it into a computer(laptop) to try it, but lubuntu for some reason only goes into the first shell. It will switch o the othr shells, but the desktop one stays blank(or rather black)Xubuntu and the other buntus on the cd however work allright in their live mode, and fedora from another live cd that was on the magazine also works fine(in fact I am using it right now)why lubuntu isnt working but the other ones are? could it be a manufacturing fault or are there underlying issues?
well I see that it works with my normal computer so it probably isnt a cd error, but rather it seems to be a gnome load issue? But why wouldnt it load when the other buntus have no problem loading it?
Trying to booting an Acer TM 8371 Notebook using USB flash media and the openSUSE-11.2-KDE4-LiveCD-x86_64 image.
After the BIOS greeting messages nothing more happens. System seems to hang. When removing the USB memory stick the system continues on trying to boot from the hdd.
When using the openSUSE-11.2-NET-x86_64 image, system detects the USB stick properly and retrieves it's ip address. Since there is no PXE system set up, installation of course stops thereafter.
What's the difference between both images? I recognized that when using the openSUSE-11.2-KDE4-LiveCD-x86_64 image a partition with type linux is created on the USB stick. When using the openSUSE-11.2-NET-x86_64 image fdisk says:
"Disk /dev/sda doesn't contain a valid partition table".
I am very much new to Debian. To have a feel and check if my laptop (HP Elitebook 6930p) is supported I decided to use a live USB option. I know how to create a live USB disk using Ubuntu and using the same knowledge I created the USB disk and tried to boot using it. The system starts to boots off the USB drive and then is stuck at a point where it fails to identify my HDD. Here is what I did a) downloaded the debian-live-508-i386-gnome-desktop.iso/debian-live-508-i386-gnome-desktop.img/debian-live-507-i386.iso (I tried with all 3) b) created a live USB using unetbootin c) tried to boot from live environment
My laptop's hard drive is encrypted using SafeBoot. After all the 3 debian images failed to boot I tried with other Linux flavors such as Mint and Ubuntu. Interestingly Mint and Ubuntu boot. Is there some thing I need to take care of?
Its basically an old SATA Hard Drive with a Windows XP partition I was trying to sell.When my computer does the BIOS checks, it doesn't pass the SMART test (but I can boot it anyway), although I can't boot Linux in any way with this Hard Disk connected (I even tried Live CD distros, like Parted Magic).I can boot the XP partition from inside the disk, although I guess its pretty close to not being able to. Is there any way to "fix" this Hard Drive?
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
My laptop can't boot from cdrom becouse it is broken and it can't boot from USB becouse it has never been able. Ubuntu 8.10 now run in my laptop withgrub 1.I've just try the following trick.1) I put grub4dos in /boot2) I put iso image in /boot3) I add the follwing entrt in source.list
Code: # =========== GRUB4GOS =================================== title == Use grub4dos for the following entries: ==
I've made a Live CD of version 10.04 on a machine running 10.04 (amd64). The disk boots fine on a 2nd machine but does not boot on the machine that created it. The CD/DVD is new and works for other things so I don't think it is this. The Live CD gets to the ISOLINUX screen but instead of "Loading" the screen goes blank and the system shuts down. I've tried everything I can think of (the disk works fine on another machine).
I installed Lubuntu, and when I boot up, Lubuntu isn't in my dual-boot options. It may have to do with the fact that I had to manually mess with the partitions in the installer. I am using XP.
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
After the last Lubuntu update Windows XP disappeared from the grub and it doesn't appear on the OS list. Is there any way I can fix or restore the grub to display XP again? I ran TestDisk and the XP partition is there undamaged, it also appears in the file system and I can access the files in Lubuntu; it's just not appearing in the grub anymore.
When I run OpenSUSE from the Live CD using normal settings, booting stops with a blank screen a moment after the kernel is loaded. When running it with ACPI disabled, it works, but direct rendering is disabled, even though it detects my video card (Mobility Radeon HD 5650) correctly Here's the Xorg.0.log file: my xorg log - [URL]
On my dual core AMD with 2 gig of memory I installed Lubuntu in VirtualBox for testing and the install was very smooth. My primary OS is Ubuntu 10.04 and it runs sweet. When I boot the Lubuntu virtual machine all I get is the arrow cursor and a blank screen.
Hey I have a laptop thats being stubborn and refuses to boot the xubuntu live cd like it cannot read the disc, while it will boot a FreeDos live cd. I can put the xubuntu CD in while in freedos and view it in as the X directory, is there anyway that I can try and boot the live CD from the FreeDOS interface
I tried installing Ubuntu 9.10 on an older computer. I figured since it was not that powerful, I'd try running it from the Live CD to see if it was acceptably fast. Of course, I forgot that I had put in a pair of unformatted 40 GB hard drives, so the Live CD didn't like those because there were no file systems to access. So I figured I would just reboot and install it. One problem: my PC acted as if there were no CD in the drive. So I tried a Windows XP CD, but I got the same result.
I reset the configuration data in my BIOS and I set the drives up correctly in there, made sure the boot order was right, and all of that. I was wondering if anyone has experienced something like this before, and if there's anything I can do before I try replacing the CD-ROM drive with another one. Computer info: Gigabyte 7IXE4 mobo with Athlon 1.2 GHz, 512 MB RAM, 2x 40 GB Seagate Barracuda HDs, not sure what the video card is (I'll worry about that one when I get there)
I cannot get past the login screen. I tried entering through it but that fails, it keeps returning me to the login. Is there a generic login for the Live CD to test drive UBUNTU?
I had issues installing Ubunut 9.10 on my Asus UX50 laptop but it installed perfectly on my tower. When installing 9.10 on my laptop I would get the live disc menu to try or install etc. Whenever I installed I got a big black screen for long lengths of time (each time varied from 15 minutes to 5+ hours), then on occasion I would get the glowy white Ubuntu logo, then if I was lucky, I would get scrolling code. It would scroll and scroll then stop. After the code stopped I would get the nice little blinking curser. I can type all types of fun things at this black screen but nothing seems to work.
I have tried 4 different CDS to no avail, my tower had the OS installed by one of the same discs.
I am successfully running 9.04 on this laptop.
a command of : lspci gives me Quote: 00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
[Code].....
From what I understand, my nVidia card may be the issue. So I have tried to boot in safe graphics mode and this also does not work. Safe mode directly delivers me to my black screen with my blinking curser.
I have also checked my drivers and I have no proprietary drivers installed.
Since I have 9.04 installed successfully does any one think that upgrading from Upgrade Manager would be successful?
My notebook is an HP Envy 15 (Core i7 720QM, Intel DMI Host Bridge, PM55) I have 2 ISO files, Ubuntu Karmic 9.10 and Ubuntu lucid lynx 10.04, both have correct md5sums, i burned each on cd's and flash usb disks ( using unetbootin and lili usb tool ). However i never had a successful boot, i always reach : (initramfs): Unable to find a medium containing a live file system.
Bios of notebook has no settings to tweak regarding HDD Could this be a sata issue anyway ? I tried searching for this issue on the forums but all the posts were having burn problems, I also tried the flash usb disks on a desktop machine and they boot properly with no problem.
I'm trying to get a persistent live usb of ubuntu lucid, with usb creator. When trying to boot, it will just display "boot error". So I clean the USB key, re-installed everything. Still the same. Then I try on laptop, and surprise, it works. So i restored default on the desktop's BIOS. And updated BIOS.No changes.
I am trying to boot the latest Ubuntu/Kubuntu 10.04 Lucid Lynx but im facing the same problem. The scrolling dots appear but then when its supposed to load X, no display on my monitor.. My monitor shows no signal.I am getting this bug on ubuntu, kubuntu and even linux mint which is a spinoff of ubuntu. Is there no way for me to boot the live cd using safe graphics mode or something? Same error when trying to install using wubi.
Two days ago Ubuntu crashed and I had to reformat my computer (I don't know what happened and I couldn't fix it). I'm running Window XP right now and am having trouble booting/installing several distros of linux.
I've tried Kubuntu, Ubuntu, Xbuntu, Puppylinux, and Fedora live CDs and continue to get the same thing.
When I boot, after the bios, I get a flashing "_". I don't get a boot and have to reboot and remove the CD.
I would like to get Xbuntu running as soon as possible.
EDIT: Also, In windows, when I go to my computer I cannot see the Live CDs. I don't know if this is related in some way.
I've created a live usb with Startup Disk Creator on my desktop running Ubuntu 10.10. The live usb is Mint 10 (Julia). I wish to overwrite Ubuntu 10.04 running on my Dell Inspiron 6000 laptop. The reason for this is that Mint requires fewer resources and is better suited for my laptop duties.
I have used the live usb solution for several installs and never had a problem. Following protocol, I shut down the laptop, inserted the live usb and restarted. Nadda.
I made sure that the USB is the 1st boot device in the BIOS.
i got a new laptop today, i bought it just to use linux. i but the iso on my usb and it works fine on the pc, but when i try it on my new laptop i am getting 'boot error' and must restart and remove usb.
I made a Live USB with Lubuntu 11.04. I installed it on my other laptop and it worked fine. Now I install it on my other and it says "Can't Find Medium With Live File System". A difference could be that on the first laptop, I used Plop Boot Manager to boot the USB. Could that affect it?
I have used this CD to install successfully before, but on the computer i am currently trying to install it on, it won't load after pressing Install Ubuntu. Natty Narwhall 11.04 by the way
I downloaded Ubuntu 10.10 2 days ago and tried to instal it on my:HP EliteBook 8540wIntel Core i7 740QMIntel QM57 Express8GB RAMnVidia Quadro FX 1800 with CUDA (1GB)Of course I went 64bit, but the Live CD wouldn't start. Instead I get some weird artifacts on my screen.I can see bits of my Windows-background with taskbar and some of the windows I was using earlier before restarting, like the download manager. If cold boot my PC I see black and white boxes with coloured dots on them.
Thus I thought of an issue with the 64bit architecture and possibly the grafics card too (the artifacts are clearly remnants of data from the VRAM)I tried the same with the 32bit version and got the same issue (indicating NO issue with 64bit, at least not directly).In the end, I installed Ubuntu from the alternate 64bit CD and now am stuck with a non-working installation of Ubuntu.I get some kind of error concerning pcieport (probably PCI Express).When I install Ubuntu on Virtualbox through Windows 7 however, I don't get any kind of issue (I'd still like to be able to run Ubuntu natively)Any idea on how to fix the problem?PS: I'm not very experienced with Linux, so if you ask me to go into console mode, please be detailed on what command I should input.
