Ubuntu Multimedia :: Finding A Driver For Nvidia's GeForce GT 440 1GB Card?

Mar 11, 2011

anyone knows a driver for nvidia's GeForce GT 440 1GB card.I have installed the nvidia swat-x/ubuntu-x driver, it works somewhat but the performance is really bad.

View 5 Replies


ADVERTISEMENT

Ubuntu :: New Driver Needed For NVidia GeForce Card To Run Unity?

May 8, 2011

My 4 yr old Dell XPS 400 has a nVidia GeForce 7300 LE card which won't run Unity as is. How do I determine without actually attempting to install 11.04 if there is an updated driver available that will allow this machine to run Unity?

View 1 Replies View Related

Ubuntu :: Find Video Driver For Nvidia Geforce 320M Graphics Card?

Apr 15, 2010

How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?

View 4 Replies View Related

Ubuntu Multimedia :: 10.04 And Nvidia GeForce 210 - Cannot Recognize The Card

May 6, 2010

I cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.

If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.

View 3 Replies View Related

Ubuntu Multimedia :: Unable To Use Nvidia GeForce 8200 Driver On 11.04?

May 28, 2011

I recently installed Ubuntu 11.04 on my Emachine Er1402-05, Wireless works fine, but not the grahics Emachine Er1402-05 has a nVidia GeForce 8200 graphics card. The problem is that after installation it only support resolution upto 1024x768, while my LCD has native resolution at 1600x900. I have installed the most recent nvidia driver $sudo apt-get install nvidia-current However, I was not able to config it:

$ sudo nvidia-xconfig
sudo: nvidia-xconfig: command not found

I was not able to install the package.

$ sudo apt-get install nvidia-xconfig
Reading package lists... Done
Building dependency tree
Reading state information... Done
E: Unable to locate package nvidia-xconfig

[code].......

View 9 Replies View Related

Ubuntu Multimedia :: Adding Nvidia GeForce 210 Video Card?

Jan 5, 2010

I have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is:

Section"Driver"
Identifier "Configured Video Device"
Driver "vesa"
EndSection
Section"Monitor"
Identifier "Configured Monitor"
EndSection

[Code]...

I tried changing the driver from "vesa" to "nv" without any effect. Does anyone have any idea what I should do to get this to work?

View 9 Replies View Related

Ubuntu Multimedia :: NVIDIA GeForce FX 5500 Driver Install Failed On Maverick

Oct 13, 2010

tried to install drivers for FX 5500 today, the one that Ubuntu recommended (173) and the current version (260). Both installs failed when it tried to set up python-support. Returned an exit status of "10". I don't know what that means. I could really use some help, because I just installed UT2K4, and without the driver, I can't play it. I'm running the latest release, as noted in the thread title. Dunno if it helps, but it was a clean install, because an alternate iso upgrade failed and mucked up 10.04.

View 3 Replies View Related

Ubuntu Multimedia :: NVidia G92 - GeForce 8800 GT Graphics Card Is Not Fully Functioning

Jan 25, 2010

I already posted this message on another thread but I'd like to start a new thread with it now, and add a few more details. My son and I are having trouble getting the graphics card to work properly in his computer. The resolution is good, but the graphics card is not fully functioning. He works on animation and graphics of several kinds, and the graphics programs cannot run without a fully functioning graphics card.

The computer will not run Blender and other graphics programs. Nor will it even allow for the "normal" "Visual Effects" in the "Appearance Preferences." (It comes up with the error: "Desktop effects could not be enabled," after it tries to find the driver.) The system is:

Graphics Card: nVidia G92, GeForce 8800 GT
System: Ubuntu 9.10 Karmic, 2.6.31-17-generic, 4.4.1 (x86_64-linux-gnu)
Processor: AMD Athlon 64 X2 Dual Core 4200+ (3 Gigs RAM)

We know the graphics card works because it works in Windows. (We set up the computer to boot off of either of two hard drives -- either in Windows XP or Ubuntu 9.10, karmic.) Neither my son nor I understand much of the terminology on your forums, although I have been using Ubuntu for some years and have read quite a bit. (I also have the "Beginning Ubuntu Linux" book.) I love Ubuntu, but sometimes I just cannot figure out how to get some things running. We have tried many different ways of installing the drivers and setting up the xorg.conf file. We have followed the instructions on this and other threads. We also installed NVIDIA-Linux-x86-64-190.53-pkg2.run, as well as 173 and 185. The screen will only work at a proper resolution when we set the "Driver" to "nv" in the xorg.conf file. The screen goes completely blank and dead if we set the "Driver" to "nvidia." Then we need to reboot in safe mode and edit the xorg.conf file with VIM.

[Code]..

View 9 Replies View Related

Ubuntu Multimedia :: Which Driver For Nvidia Graphics Card?

Jun 6, 2010

After having some trouble with Intel graphics I decided to pick up a PCI Nvidia graphics card. Now I am wondering what driver to use. Is the open source drive good enough to use or should I install the Nvidia driver? I know that things are generally easier with the default driver, especially for support on older cards, but I would like to get the best performance I can. This is for my Dad's computer, so he won't be playing any games, but if it will help with 2D and video that would be great.

The card is an Geforce FX5200 fanless card, I've heard they are well supported in Linux.The computer is a P4 Dell 3000 with Ubuntu desktop 10.04 32bit.

View 2 Replies View Related

Ubuntu Installation :: Unable To Install 10.4.2 LTS On PC With NVidia GeForce 6150 Card

Mar 23, 2011

This is to request the communities assistance with the following: As the title suggests, I am attempting to install 10.04.2 LTS on a PC equipped with an ASUS M2NPV-VM mobo and integral NVidia GeForce 6150 chipset/card and AMD dual processors.

Result: While the CD with the installation software loads, the splash screen comes up distorted and is displayed as several black and white horizontal bars. I have tried this with low end monitors with a VGA input with the same results. It appears to me as if though the video driver on the installation CD is not suitable for the mobo's chipset, but I may be wrong.

View 5 Replies View Related

Debian Hardware :: Install NVidia GeForce Driver For GT220?

Oct 25, 2010

install the driver for my GeForce GT 220. I'm using the latest Debian and here's what happens: I get out of X and run ./NVIDIA... .run. It then says that I lack the cc tool for gcc. If I update gcc, it says that the gcc version used to compile the kernel mismatch my gcc version. If I ignore that error, it says that it can't find my kernel source.

View 10 Replies View Related

Fedora :: Nvidia (GeForce Go 7900 GTX) Driver Install Ok But No GLX Visual

Feb 11, 2010

I've enjoyed accelerated 3d graphics for years with this laptop, but since moving from CentOS 5.3 to FC12 I have had no 3d or opengl working at all.My install seems good. I'm running right now with the 'nvidia' driver in 1920x1200 res with no real problems except the lack of 3d. I have just finished trawling the forums again, coming back to: F12,F11 & F10 Nvidia driver guides [URL] I uninstalled all my nvidia packages, re-installed only "kmod-nvidia xorg-x11-drv-nvidia-libs.i686" and dependencies, ensured 'nvidia' was my selected driver in xorg.conf (using nvidia-config-display disable, then enable), and rebooted, and still no joy. No errors in Xorg.0.log. My 'glx' extension is loaded. 'nouveau' is rdblacklisted. SELinux is disabled. I have 3Gb RAM and so have chosen not to use the PAE kernel or modules.

Code:

[neek@uberneek ~]$ glxinfo
name of display: :0.0
Error: couldn't find RGB GLX visual or fbconfig

[code]....

View 4 Replies View Related

Fedora Hardware :: Can't Install NVidia GeForce FX5900 Driver

Jan 15, 2011

I tried to install the driver '01:00.0 VGA compatible controller: nVidia Corporation NV35 [GeForce FX 5900] (rev a1)' watching Fedora Solved → Video Solutions → Installing the Drivers as Provided by nVidia "Installing the Drivers as Provided by nVidia" ,and FedoraForum.org > Fedora Support > But I failed.

Error log*********************************************** ********************
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sat Jan 15 12:52:09 2011

[code]....

I typed "su -l" and telinit 3. But "ERROR: You appear to be running an X server" is written. What I can install this driver as well? or how I can booting up the Fedora 14 in text mode?

View 5 Replies View Related

OpenSUSE Hardware :: Find Nvidia Driver GEFORCE G102M

Jun 22, 2010

find a nvidia driver GEFORCE G102M. and my laptop model is ASUS K40IN.

View 4 Replies View Related

OpenSUSE Install :: Installing NVidia Driver For Geforce GTX 275 Fails

Aug 20, 2009

I have just installed openSUSE 11.1 64 bit on my system. Subsequently registered to get an auto-update repo and auto-updated until no more updates were offered. Then I first tried YaST to install NVidia drivers from the NVidia repo (added their repo), but sax2 wouldn't recognize them. So I downloaded their 190. (beta) drivers, installed the kernel source code and gcc 4.3. Then I switched to a console (Ctrl+Alt+F1), closed the x server, ran the driver install as described (gcc 4.3 is installed). Installer said that all is fine (I checked the log to be sure). So I ran sax2 -r -m 0=nvidia, but the driver still isn't recognized.

View 6 Replies View Related

Hardware :: Unable To Use NVidia Driver For GeForce 9200 In Fedora 13

Sep 29, 2010

In Fedora 13 with the kernel version of 2.6.34.7-56.fc13.x86_64, the NVidia driver of the version 256.53 was installed from rpmfusion repository. Everything works fine except for one problem: the brightness cannot be controlled from the power management programs in either KDE or Gnome. In Gnome, the scroll bar of brightness disappears, and, in KDE, the scroll bar cannot be dragged.

Since the computer with Fedora 13 and NVidia driver installed is Dell Studio One 19 (All-in-One computer) which has no hardware buttons to control screen display options at all, there is no other way to adjust the brightness of computer screen. The BIOS of the computer doesn't include an option to adjust screen brightness either. Since screen brightness is set at the maximum level when the computer is turned on, it is not possible to continue using the computer for a continuous period of time due to eyesight protection. Strangely enough, both the Nouveau driver included in xorg-x11-drv-nouveau 0.0.16-8.20100423git13c1043 from Xorg 7.4 and the driver included in the mesa-dri-drivers-experimental 7.8.1 support brightness adjustment without any glitches.

View 4 Replies View Related

CentOS 5 Hardware :: Nvidia Geforce GTS250 Driver Installation?

Oct 6, 2010

the installation of the driver of the nvidia geforce GTS 250 fails. is it due to CENTOS or Nvidia driver?

#note1
CentOS version: 5.5
#note 2:
in the following "uname -a" output:
Linux localhost.localdomain 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux
#note 3:
in the following "/var/log/nvidia-installer.log" content:

[Code]...

View 3 Replies View Related

Fedora Hardware :: Nvidia Geforce 4 - OpenGL Support For ATI Card?

Nov 12, 2010

My friend just recently gave me an Nvidea Geforce 4 64mb, and it is supposed to be better than my ATI x700 Pro. I was wondering if there was openGL support for this card, and how do i replace it with my ATI card?

View 1 Replies View Related

Fedora Hardware :: NVidia GeForce 310m - Use Card In Conjunction With 14?

Feb 17, 2011

Is there anything special I need to do to use this card in conjunction with Fedora 14? It's been acting a little strange lately. Also I think the card may have some type of 3D support although I'm not entirely sure on that.

View 1 Replies View Related

OpenSUSE Install :: Nvidia Geforce 7800 Gt Graphics Card Not In HCL?

Jan 22, 2010

I did not find my graphics card in the HCL/Nvidia video cards thread. I looked in YaST for drivers & found none. My desktop pc freezes after the system loads so I cannot use my system. I understand about the level '3' boot option for tty input. How would I download/run the nvidia installer from tty?

View 4 Replies View Related

Hardware :: Upgrading From NVidia GeForce 9500 GT Video Card

Dec 12, 2010

I am planning on upgrading the video card in my computer, an NVidia GeForce 9500 GT video card, to something that can handle at least 1600x1200 24-bit resolution without noticeable choppiness other "slow-downs" in graphic display. The card in question does have one gigabyte of RAM, but the type of memory it utilizes is DDR2 instead of something, i.e. DDR3 and above, with greater speed. Admittedly, the system in question is used for gaming as well as work. I want to stick with the NVidia brand because it has worked well for me, but I am not sure what would be the correct line of cards to use.

View 4 Replies View Related

Slackware :: NVidia GeForce 9400 GT 1gb Graphics Card Troubleshooting?

Apr 28, 2010

After installing "nvidia-driver" and "nvidia-kernel" through "sbopkg" I ran "glxinfo | grep -i nvidia" as user (not root) Shows: "Xlib: extension "GLX" missing on display ":0.0". GLUT: Fatal Error in glxinfo: OpenGL GLX extension not supported by display: :0.0" I'm really sure that there is a problem with this or error instead. Or is there any other way of installing nvidia..? "uname -a" "Linux purple 2.6.29.6 #2 SMP Mon Aug 17 11:58:18 CDT 2009 x86_64 Pentium(R) Dual-Core CPU E5300 @ 2.60GHz GenuineIntel GNU/Linux"

Quote:

Linux is not user-friendly. It _is_ user-friendly. It is not ignorant-friendly and idiot-friendly.

View 27 Replies View Related

Hardware :: Slowdown With Nvidia's Legacy Driver 173.14.27. Geforce FX 5900 Ultra

Oct 9, 2010

I'm running a Geforce FX 5900 Ultra with nvidias 173.14.27 driver. I'm running slackware 13.1 with kernel 2.6.35.5.

I get a horrible slowdown which is noticeable in emulators such as bsnes and kega fusion. I also think it's responsible for other issues that involve zsnes flickering like mad and hanging. Zsnes will actually crash if I select any filter plugins with opengl output modes.

Kega Fusion slows down to a crawl (we're talking 10 fps) immediately before loading a rom. Playing a rom makes it even slower.

Bsnes has the same kinda slowdown as kega fusion (even worse since it's so cpu intensive) when I activate scanlines or any type of output filter with opengl. Otherwise with no filters and just plain opengl it seems to run fast like it should...

Gens-GS doesn't seem to enable any filters in fullscreen mode... They work however in windowed mode with no slowdown issues...

I've compiled and installed SDL 1.3 from hg repository, then recompiled bsnes just to test it with newer SDL. Unfortunately the problem persists even with a newer SDL version which thankfully for me means I can revert to the older stock SDL without having to recompile everything else haha!

It's funny because I thought these issues were related to the emulators and not the video card drivers. I had these issues for a couple years running ubuntu and trying other distros. When I installed Slackware 13.1 I decided to try my Radeon 9700 pro and kega fusion no longer had this slowdown issue! I switched back to my Geforce and installed nvidia's drivers and immediately had slowdown issues... I'm gonna switch back to the radeon card and test the other emulators but otherwise it'd be nice to know if there's a solution to this issue...

Ok I installed my radeon card: nvidia-installer --uninstall, then updated xf86-video-ati from 6.13.0 to 6.13.2. Even though kega fusion runs fine I get even worse problems with everything else! LOL so I'm going back to my geforce card.

View 2 Replies View Related

OpenSUSE Hardware :: Nvidia Card Change 7300 To Geforce 275 - Get The New One To Be Recognized

Feb 3, 2010

I changed my old video card for a newer in order to use all the resolution of my screen 1920X1200 and not 1920X1080, in my just installed 11.2, rebooted and got to log in graphic mode,looks good. But isn't. It is working because the new card is seen as the old !How can I get the new one to be recognized, and acces the newresolution ?

View 1 Replies View Related

Hardware :: NVidia GeForce 8600GT Graphics Card Not Working Properly

Jan 28, 2010

I have a problem with a new GeForce 8600GT graphics card. I just installed the card into my Dell Optiplex 745. When I boot the PC I have no image until the Ubuntu logon box comes up. No bios info, no boot menu, no grub menu, nothing until the Ubuntu login. Once I get to the logon prompt everything seems fine except when I use CTRL+ALT+F1 to get to a console. Then I get nothing but a blank screen. When I press CTRL+ALT+F7 my desktop loads fine and all is OK again. I had a problem trying to get the nVidia drivers installed because I didn't have a usable console. I had to use SSH to install the drivers. I'm using this card with an HP 1755 flat panel that's about 5 years old and a Dell Optiplex 745 with Intel Dual-Core CPU.

View 8 Replies View Related

Software :: Nstalling The Driver Of Nvidia GEForce 9800 GT On RHEL5.5 The Monitor Goes Out Of Range?

Nov 2, 2010

After installing the driver of nvidia GEForce 9800 GT on RHEL5.5 the monitor goes out of range ?? What to do ?

View 5 Replies View Related

CentOS 5 Hardware :: NVIDIA Geforce 8600M GS Driver - Graphic Output Is Not Good?

Oct 6, 2009

My graphic output is not that nice. How do I find out what kind of driver Centos is using? Can I fine-tune its performance? I tried to install the driver(NVIDIA-Linux-x86-185.18.36-pkg1) from NVIDIA website but it failed. I got the following log file.

---
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue Oct 6 15:33:24 2009
installer version: 1.0.7[code]....
ERROR: You appear to be running an X server; please exit X before installing.For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at[url]...

View 1 Replies View Related

OpenSUSE Hardware :: Nvidia Geforce 8600m GT - Few Coloured Shapes In The Background (Video Driver Not Loaded)

Mar 31, 2010

I have a Macbook Pro which i want to install Opensuse 11.2 64bit(Upgrades to 11.3) The problem is that once i install opensuse and then boot via rEFIt, it loads up till the desktop is supposed to appear. All i get at this stage is darkness with a few coloured shapes in the background (Video driver not loaded).I can however reboot and go in via the failsafe option. Once in here i can use the GUI. I am a total noob with linux, can some one give me the instructions on how to install this driver. Its driving me insane. When i run uname -r, the results are 2.6.33-6-default I have added the following http repository (download.nvidia.com/opensuse/11.2/)

View 3 Replies View Related

Ubuntu :: Uninstall The Nouveau Driver And Install NVIDIA-x86-71.86.14-pkg1.run For Old Nvidia TNT2 Card?

Nov 30, 2010

Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:

Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.

View 3 Replies View Related

OpenSUSE Hardware :: Short Freeze's On Machine's With Nvidia-Card & Nvidia-Driver?

Aug 8, 2010

The freeze's on my machine only appears when i monitor the temperature of
the gpu. Normally i use gkrellm to monitor temperatures including the gpu temperature. When i stop gkrellm there a no more freeze's on my system. Then i started nvdock which also monitor the gpu temperature and the freeze's are back. Stopping nvdock make the system working normally. I have done a few reboots now, warm and also cold starts und everything works normal.

System data: AMD P2 X4 940, Nvidia GTS 250, openSUSE 11.3, Nvidiadriver 256.44,
Gigabyte Mainboard GA-MA78G-DS3H rev.2,8GB RAM, KDE 4.4.95,

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved