Hardware :: Access EXT Formatted Partition From Vista?
Jul 28, 2009
I need to access my EXT3 formatted partition in Vista. I am using Windows again for this game and my Ubuntu is messed up. EXT2IFS does not work in Vista, even with compatibility mode. When I open my drive it asks me to format it. EXT2FSD works but gives constant BSODs...
I installed XandROS on my vista machine. I can access the Windows partition from Linux but in Vista I cant see the Linux partition...is there anything I can do about that?
When I run out of space on my Ubuntu partition, which will probably happen with me being the untidy person I am, is there a way to resize the partition in Windows or Ubuntu that will allow the other to boot? As I've heard stories of using Gparted to resize a Windows partition doesn't allow Windows Vista to boot up as it removes a crucial part of the operating system? I have adequate space to give to Ubuntu on my NTFS partition. May I also add that to install Ubuntu I had to use the partitioner that came with the installer, because the Windows Disk Manager wouldn't let me partition the NTFS drive, because it Denied my Access.
Dual booting Ubuntu and XP, I've been using ext2fsd for a long time.Recently I did a fresh install of Lucid. Now when I try to run ext2fsd from XP, it tells me that my ext3 partition needs to be formatted.I vaguely recall having had and solved this problem in the past, but I just can't find the solution.
I just installed kubuntu 10.10, replacing an older installation. I have three hard drives one of which had all of the data I wanted to save, about 500gb. I repartitioned and formatted the other two drives and made sure that the data drive would be mounted but not formatted. When I booted into my new installation, the data drive was blank. I'm not sure if it's relevant, but I had just upgraded the file system from ext2 to ext4 before starting the installation.
I've been trying to recover my lost partition with testdisk. The website has instructions for recovering a formatted partition. It looks like it's working until the instructions tell me to choose Boot and RebuildBS, which I don't see as options. Can anyone give me any advice on how to recover? How did this even happen? Has anyone had a similar issue with installation?
I did not find the solution to my problem reading other posts so I apologize in advance if this question has been solved in a previous thread.I recently started having input/output errors when trying to access directories on my external HD. Today I moved the content of my external HD to a single directory before starting a backup. Since then I can not access this backup directory anymore although the external HD automatically mounts when I turn it on.
I tried my luck starting the external HD in Windows but it wont show up in the explorer. What should I do to be able to mount it in windows and is there any way this would fix the problem?I'm running xubuntu kernel v 2.6.27-14-generic and the external HD is an acomdata.
I had 3 partitions on my hard dive, Windows 7, Ubuntu, and just junk on the other. I installed Ubuntu in a way where it went to the GRUB filesystem? first, where it ask me to start in linux kernel 2.38.6 (can't really remember the kernel exact name) which was ubuntu, some other options, recovery mode, and at the very bottom was the one to go to Windows 7. I was in Windows and I wanted to get rid of my junk partition but I formatted the Ubuntu partition by mistake.
Now when it boots up it saying: Error: unknown filesystem. grub rescue> I hope there is a way to save my files on Windows. I tried to reinstall Windows 7 back on my computer but it wouldn't go through since the grub startup thing is the main one, not the windows one.
My colleague needed a backup for some of his loose media, so I assured him I could back it up on our Lab's Lacie 2TB external. His windows partition was incredibly sluggish, so he booted into ubuntu 11.04 and we partitioned and formatted an NTFS volume for him to transfer his stuff to. The format went fine, space was available, and I left him to transfer all of his stuff from his dell studio1555. He finished and reformatted his computer completely.
The NTFS is not recognizable by any of the OS now. Ubuntu sees it as a single partition without any data, whereas before the transfer, the partition map was clearly visible. Windows does not recognize the drive at all. OS X does recognize the partition, but it shows up as an apple_scratch volume, which is quite a bit frightening, considering a scratch volume is essentially blank. To elaborate, all of the files were in his windows partition, and were transferred within a relatively fresh install of ubuntu (not much had been done on it). The partition was made in diskutility in ubuntu (the GUI), but the rest of the drive was HFS+ formatted.
I was using windows 7 and I decided to install BackTrack 4 as an operation system so that I can have 2 operation system on my machine, during the installation, I accidentally formatted the windows 7 and right now, I am using only the BackTrack 4, now, I want to re-install back the windows 7 as an operation system but whenever I inserted my CD, it display this words under the Default: >/ubnkern initrd=/ubninit It needed a command from me in other to proceed but am new in Ubuntu and I dont know what I should type or the command I should used in other to finish installing the windows 7.
By mistake I formatted an ext3 partition on my external hard-drive. Now it has turned into a vfat filesystem. Is their any chance of recovering the lost data?
I just installed suse 11.3 on formatted partitions (5GB swap, 30GB / and 500GB /home). Just after the installation, My computer showed 25.2GB of /home to be used. When I do:
Code: dyn-0a2a1f40:/ # df -h .....
That seem to be roughly correct because since yesterday I've been running a program that constantly writes logs and other data files and plots, which might have accumulated a few GB's. It is also collaborated by the output of
Code: dyn-0a2a1f40:/ # du -sk /home 10548452 /home
I'm not hard-up on space right now but storage has been dear until the recent past. Also out of curiosity, the size of the /home partition is shown as 493 instead of the 500GB allocated while the swap also lists only 4GB instead of 5GB. Below is the output for fdisk -l in case anyone needs it:
I was installing 10.10 x64 today. I wanted to manually partition the disks, since I have a /home partition from a 9.10 installation which I want to keep.Unfortunately, I selected to convert the ext3 /home partition to ext4 and didn't realise it was formatting the partition until it had just begun. In desperation, I pulled the power plug, but now I can't access the partition (using the LiveCD) - comes with an input/output error.What are some strategies to recover the data on the partly formatted partition? I don't think much, if any, was actually formatted.
I have 250 GB HDD, 150 GB has CentOS installed,I have formatted the rest 100 GB in vfat, mounted on /data/ folder, now the issue is only root have the write permission on that folder, i have tried all the commands, however i have reformatted it with ext3 and now issue is resolved, i just want to know that why it is not possible to set the permissin to everyone +w on vfat partition.
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
I accidentally formatted a 2TB drive of mine (big oops), but have recovered 2 of the 3 partitions using testdisk. My third partition is a LUKS encrypted partition. Testdisk managed to recover a piece of it, but it won't mount as most of it is unallocated. The partition originally occupied all space from sector 2,930,272,065 to the end of the disk -- sector 3,907,024,064. That is about 473 GBs. Currently, the partition only uses space from sector 2,930,272,065 to 2,930,288,129, about 7.84 MB.
The rest of the space is unallocated. Now what I need to do, is to expand the partition so that it occupies all the space that it used to. How would I do this? I cannot resize the partition, cause it would try to recreate the filesystem AFAIK and I don't want that, as it will fry my data. My data is not terribly important, but I would rather have it then not. I attached a screenie of kpartitionmanager. The partition in question is /dev/sdb2.
I have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
I've set up a RAID-1 array /dev/md0 consisting of two partitions /dev/sda5 and /dev/sdb5.The partition /dev/sda5 was formatted "ext2" before mirroring, but now when I "mount -v /dev/md0 /mnt", it says "/dev/md0 on /mnt type ext3 (rw)".Why is the type changed from "ext2" to "ext3" ?
1. Copy vmlinuz and initrd.img from isolinux subdir into /boot 2. Adjust grub.conf to boot to that kernel 3. Reboot to setup 4. Format /boot (actually '/' ) during "fresh install" 5. Proceed with the installation-over-network
I see two possible outcomes:
1. The setup fails to reformat the drive, because it is "in use" by boot kernel
2. The partition is not "in use" and the installation succeeds
Why? Old cluster with broken CD-drives, lacking USB, and no separate /boot partition.
I installed Ubuntu 10.04 on a computer I have, and can access the two vista computers on my home network, but when I try to access my XP machines I get Unable to mount Location Failed to retrieve share list from server.When I try it the other way round from the XP machine it is able to access the Printer and faxes file on Ubuntu.
I've got a dual boot system with Ubuntu 9.10 on one partition and Vista on the other.
After selecting the Vista option within GRUB, the boot seems to start as normal and after the Dell scrawl screen, the machine just seems to restart and I end up back at the GRUB menu.
Booting into Vista recovery mode doesn't resolve the issue.
The only other oddity I could mention is that I believe an update I did after installing 9.10 updated the linux kernel, because there are now two sets of linux kernel versions available within GRUB, while there was only one present when I first installed, and Vista was still working.
Bottom line: I was able to print to a network printer before. Now I can't. I can print from my Vista partition, but not from 11.04.
Level of Linux experience: Like listening to a conversation between a Brit and an American.
Details:
(1) HardwareDual boot on Dell Inspiron 530 (11.04 and Vista)iomega print server GPSU21hp Office Jet 5610 All-in-One(2) Test page: pdf file from a usb drive; other test pages produce same results
Installation of network printer:
I followed what I believe to be standard procedure: Using the Unity interface, I opened up the Printing application. I then clicked "Add". Then "Network Printer", then "Find Network Printer". I typed in the Host (192.168.1.6; static assignment made while in Vista via iomega's software). Then it searches. It fills in its own blanks thus: Under the heading "Devices" > "Network Printer" it says, "JetDirect (192.168.1.6) (192.168.1.6)". In the panel on the right it says, "Host: 192.168.1.6:631/ipp", then, "Queue: ipp". I click "Verify..." and an error message pops up that says, "Inaccessible The print share is not accessible"
If I proceed forward, I can install drivers, but nothing will ever print. Following procedure, I click to print a test page. The job is sent to the queue and then I get this Printer State message: "Stopped - Destination printer does not exist!"
I used to have a dual boot vista + ubuntu jaunty configuration. I installed ubuntu bootloader in the ubuntu partion not the MBR using advanced option during installation. Then i used Easy BCD to edit my Vista Boot Configuration and add an entry for Ubuntu.
Problem: Everthing worked like a charm, until one day i decided to shrink my vista partition to get some free space using Microsoft Windows Disk Management Utility "diskmgmt.msc".
Now when i boot into linux i get grub prompt only.
When i do this (to find out my linux partition):
Then i booted with ubuntu live cd
Same thing : file not found
And i dont see my Ubuntu partition in My computer under Live DVD session.
Then i opened Gparted it doesn't show any ext2/ext3 partitions instead it shows my ubuntu partition as Upartitioned. Now is it that my ubuntu partition is dead, i can never recover it back.
I cannt access my vista after installing Ubuntu 8.04 on a Toshiba with 250gb I am unable to access the windows partition since its only the linux partition being displayed.
after installing some updates while on linux I am now unable to access the Internet when using vista. I m trying to solve this without success. Internet is still accessible from linux, and vista canl connect to the local network.
I am trying to install Fedora on my machine, Vista currently installed. During the install process, I select the partition which I created, but install program says I must define a ROOT partition. How do I do this?
I installed fedora 10 on my laptop as a partition with vista. However i'm now not able to boot into my vista partition as everytime I try it comes with an error saying "bootmgr" is missing. Below is whats in my grub.conf file. However I am able to access my vista partition through fedora.
My cousin just deleted his Linux partition and another smaller partitio nand now Windows is not booting, no he does not have the recovery disc. When Windows tries to boot it goes to "GRUB" and says "partition not loaded". What are some GRUB commands? And is it possible to fix this without using the recovery CD?