Ubuntu Installation :: Accidentally Formatted /home Partition - Recovery?
Feb 11, 2011
I was installing 10.10 x64 today. I wanted to manually partition the disks, since I have a /home partition from a 9.10 installation which I want to keep.Unfortunately, I selected to convert the ext3 /home partition to ext4 and didn't realise it was formatting the partition until it had just begun. In desperation, I pulled the power plug, but now I can't access the partition (using the LiveCD) - comes with an input/output error.What are some strategies to recover the data on the partly formatted partition? I don't think much, if any, was actually formatted.
View 4 Replies
ADVERTISEMENT
Aug 26, 2010
I was messing around with the windows 7 install and wiped a valuable partition on a drive, I ripped the sata cable out afterwards... is there a way to reconstruct the table?
View 2 Replies
View Related
Nov 1, 2010
I accidentally formatted a 2TB drive of mine (big oops), but have recovered 2 of the 3 partitions using testdisk. My third partition is a LUKS encrypted partition. Testdisk managed to recover a piece of it, but it won't mount as most of it is unallocated. The partition originally occupied all space from sector 2,930,272,065 to the end of the disk -- sector 3,907,024,064. That is about 473 GBs. Currently, the partition only uses space from sector 2,930,272,065 to 2,930,288,129, about 7.84 MB.
The rest of the space is unallocated. Now what I need to do, is to expand the partition so that it occupies all the space that it used to. How would I do this? I cannot resize the partition, cause it would try to recreate the filesystem AFAIK and I don't want that, as it will fry my data. My data is not terribly important, but I would rather have it then not. I attached a screenie of kpartitionmanager. The partition in question is /dev/sdb2.
View 4 Replies
View Related
May 2, 2011
My hard drive has the following partitions:
/dev/sda1 ntfs (reserved for system)
/dev/sda2 ntfs (win7)
/dev/sda3 extended partition with the following:
[code]....
View 3 Replies
View Related
Jul 17, 2010
I just installed suse 11.3 on formatted partitions (5GB swap, 30GB / and 500GB /home). Just after the installation, My computer showed 25.2GB of /home to be used. When I do:
Code:
dyn-0a2a1f40:/ # df -h .....
That seem to be roughly correct because since yesterday I've been running a program that constantly writes logs and other data files and plots, which might have accumulated a few GB's. It is also collaborated by the output of
Code:
dyn-0a2a1f40:/ # du -sk /home
10548452 /home
I'm not hard-up on space right now but storage has been dear until the recent past. Also out of curiosity, the size of the /home partition is shown as 493 instead of the 500GB allocated while the swap also lists only 4GB instead of 5GB. Below is the output for fdisk -l in case anyone needs it:
Code:
dyn-0a2a1f40:/ # fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x219b052d .....
I have Linux 2.6.34-12-desktop x86_64 and KDE 4.4.5 (which I had previously used in 11.2 without any problems) and 4.0GB RAM.
View 9 Replies
View Related
Jul 1, 2011
I accidentally formatted my Win 7 partition. I there any possibility of recovery? Failing that, is there any way to salvage files etc?
View 2 Replies
View Related
Jun 18, 2010
Is there any software for Ubuntu that can bring the files all back?
View 9 Replies
View Related
Jan 16, 2010
I'm on the latest Ubuntu OS on my netbook trying to make a USB Startup Disk. I have a 1GB USB and a 500GB hard drive plugged in to then netbook. I run the USB Startup Disk program, and it tells me I need to format the USB drive. Okay, so I press format, only to realize that I'm formatting the 500GB hard drive.However, when I pressed format it give me an error saying the disk could not be mounted. I did something on Disk Utility and now I have a FAT32 system on the hard drive with nothing in it. Now my ultimate question is, am I able to recover the data that was on the hard drive?The hard drive was formatted in HFS+, it was a Mac-formatted hard drive. Will I need to use a Mac in order to try to restore my files?
View 5 Replies
View Related
Jul 10, 2010
Could I please have some recommendations for Data Recovery of a Formatted Drive. There are so many choices out there that I don't know which one I wanna use.
View 4 Replies
View Related
Feb 10, 2010
While install Ubuntu on an existing xp pro I accidentally formatted my hard disk. Is there any way to get back my files it contains e books pdfs photos music files and movies. Data recovery. My Hard Disk 80GB SCSI NTFS.
View 2 Replies
View Related
Feb 20, 2011
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
View 4 Replies
View Related
Aug 1, 2011
I tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
View 3 Replies
View Related
Mar 7, 2011
Is there anyway I can recover my files that used to be on a FAT partition which I recently formatted to ext4?
View 2 Replies
View Related
Mar 8, 2011
What exactly I did here to aid in attempting to recover my Windows system. My laptop was dual Wubi-boot with Windows 7 and Ubuntu, and after encountering issues booting into my Wubi Ubuntu, I went in to recover important files to do a reinstall. Using an Ubuntu livecd, I created a directory called "win" (sudo mkdir /win) and then mounted my Windows 7 partition (sudo mount /dev/sda1 /win) to that folder name. However, after encountering some issues there, I made the mistake of removing the "win" folder without unmounting the Windows 7 partition using "rm -rf /win". After that, my Windows system appears to be missing. Can anyone tell me what exactly I did? Did I delete the partition?
View 9 Replies
View Related
Jul 18, 2010
I was trying to remove the physical volume from an old drive. So I opened gparted and told it to rewrite the partition table. The only problem is I targeted the wrong volume, I wiped the partition table on my 4tb raid5 array This 4tb array has everything! All my movies, tv shows, music. The only things I have backup up off site are my smaller files like documents. I was about to lose my whole media collection.
I did some research and found a solution that I will post here in the hopes that someone will google "I deleted the partition table on my lvm" and be find the solution.You should find in your filesystem a /etc/lvm/backup folder. LVM puts a copy of the crucial lvm information there every time you change the the volume group.
In this folder you will find a file for each volume group. In this file you will find the uuid for all of the physical volumes that make up that group.The first step is to recreate each physical volume with their original uuids. In my case I had only 1 physical volume, which was my raid5 array. My recreation command looked like this:
pvcreate --uuid cLrY02-zrVi-D0Vi-cIPB-6fF5-ed0c-XFF0os /dev/md0
Now I have a physical volume with the same uuid it had before. It is essential that you correctly match up the uuids with the correct physical deviecs.The recreated pv is empty, the volume group needs to be recovered. This is done by using a special tool and the backup file. For me the command looked like this:
vgcfgrestore --file /etc/lvm/backup/raid5 raid5
This tells it to recreate the volume group using the information in the backup file. The backup files looks for the uuid of the PV, which now matches the correct volume. The coordinates in the backup file match up to the data on the array an suddenly everything is back!
When I deleted my LVM partition table I did not damage any of the actual volumes on the volume group, I just wiped out the table of contents. The backup file had the information needed to rewrite this table of contents.
View 1 Replies
View Related
Apr 30, 2010
This morning, i want to install ubuntu 9.10 and want to upgrade to 10.04. Im using live CD and while install, i go to advance partition and resize the windows partition and after i resize the partition i saw my windows partition has lost.Here the details:Windows XP size: 80gb and free size 35gbi want to use my ubuntu size around 10gb, after i resize to 10gb and format etx4 as root my windows partition has gone. how to recovery and revert my windows partition back?
View 6 Replies
View Related
Mar 16, 2010
I'm about to install Ubuntu Netbook Remix and my Acer machine has a recovery partition at the beginning of the drive. I've created the eRecovery discs but those will only restore XP - not the actual recovery partition (which I'd like to have in case I sell the laptop later etc).
How can I backup the actual recovery partition, and keep its boot file intact. Then how can I restore this partition at a later time?
View 3 Replies
View Related
Sep 2, 2010
I have just bought a new computer and I want to partition it to be dual booting as I have done a few times in the past.
Currently (alternatively, see attached screenshot):
There are three partitions:
/dev/sda1: FAT16 DellUtility (takes very little space and is of no concern)
/dev/sda2: ntfs RECOVERY (takes up 17.58GB and is marked boot)
/dev/sda3: ntfs OS (the rest of the computer, on which windows is currently installed)
[Code].....
it is safe to delete the current boot partition. I am also not quite clear on when the recovery partition would be used and whether it is really all that necessary (18GB doing nothing seems like a lot to me). Should I make a system recovery media for windows before repartitioning? Also, I am not sure which type of ext partition to use. Finally, I am not sure how big to make the swap space. I think I recall the normal rule being twice the RAM (6GB RAM in my case), but 12GB swap space seems like a lot. Although I do sometimes run memory intensive programs (simulations for research). I normally use other computers for such simulations since they have far more RAM than my computer can possibly have even with a large swap space.
View 9 Replies
View Related
Oct 18, 2010
I have an issue with my keyboard not being picked up in Ubuntu and I went to go ahead and boot into the factory recovery partition to start from scratch, but after it gives me a ramdisk loading bar, then goes to a black screen with a mouse like the recovery will start, then the computer just restarts. Now, I can boot into Ubuntu (but no keyboard) and boot into XP (as I am now) but I can't get the recovery partition to boot.My current station is out in timbuctu, so I am awaiting the arrival of a flash drive to load a LiveCD onto to use Gparted for any potential solutions.
View 1 Replies
View Related
Sep 1, 2011
i have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
View 9 Replies
View Related
May 11, 2011
I was wondering what the best way is to partition multiple distros to share one home partition.
View 8 Replies
View Related
Aug 24, 2011
My laptop came with Windows 7 on it and a while back I dual installed Ubuntu on it. A few days ok I was looking for some more space and accidentally deleted my Ubuntu partition. Now when I boot up all I get is grub rescue. I've tried reinstalling Ubuntu but whenever I click to install or try Ubuntu it eventually ends up with an "initramfs" prompt.
View 9 Replies
View Related
Aug 19, 2010
I'm having an issue installing Ubuntu with Windows 7 Home Premium 64-bit through Wubi. The Wubi installation works great and Ubuntu seems to install after the first reboot after selecting Ubuntu from Windows' boot menu, however whenever I select Ubuntu from Windows' boot menu after Ubuntu installs and it reboots for the second time, it loads the GRUB bootloader, however Ubuntu isn't listed at all.
Windows 7 is listed twice and Windows Vista is listed (seems it picks up the recovery partition for Windows 7 as Vista) and when I select the first Windows 7 from the GRUB bootloader, it just goes back to Windows' boot menu with Windows 7 and Ubuntu as the selections. If I select the second Windows 7 from the GRUB bootloader, it'll boot Windows 7 like normally. It looks like Ubuntu is nowhere to be found. Because of that, I just ended up uninstalling it.
View 4 Replies
View Related
Nov 13, 2010
I'm thinking of buying an Acer Aspire D250 loaded with Win7 and then adding a version of Ubuntu.
The netbook will come with the Acer recovery facility to reinstall Win7 from a recovery partition in the event of OS failure. This means that the MBR and subsequent loaders need to be preserved for this function to remain (I don't have a Win7 disc and don't want to have to buy one).
I'm happy with a basic Win/Linux dual boot setup but I'd value any comments/suggestions as to how to preserve the recovery function when I add Ubuntu.
View 9 Replies
View Related
Aug 9, 2011
I would like to build an oem style install partions that is bootable with menu to choose if I want to run install or boot already installed system. I would like to include current source packages on the same dive so if I don't have internet access at time of install, can can still install what I need.I know with Windows Vista and Windows 7, you can get this but how can I do this with Debian?
View 1 Replies
View Related
Jan 8, 2009
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
View 5 Replies
View Related
Feb 13, 2010
The problem is, on a machine, you can only have 4 primary partitions. sda1 and sda2 are my Vista and Recovery partitions respectively, which eliminates two of my primary partitions already. I myself have never used logical partitions, and was wondering if any of the partitions the Beginner's Guide recommends (/, swap, /var, and /home) could be made logical, and if I even need a swap partition.
View 5 Replies
View Related
Jan 14, 2010
Trying to clean install 11.2 dual boot with Win xp already installed. How do I create a new home partition, don't want to preserve the existing home partition from a previous attempt. DVD installation and automatic config keeps saving the thing.
View 5 Replies
View Related
May 27, 2010
Dual booting Ubuntu and XP, I've been using ext2fsd for a long time.Recently I did a fresh install of Lucid. Now when I try to run ext2fsd from XP, it tells me that my ext3 partition needs to be formatted.I vaguely recall having had and solved this problem in the past, but I just can't find the solution.
View 8 Replies
View Related
Dec 19, 2010
I just installed kubuntu 10.10, replacing an older installation. I have three hard drives one of which had all of the data I wanted to save, about 500gb. I repartitioned and formatted the other two drives and made sure that the data drive would be mounted but not formatted. When I booted into my new installation, the data drive was blank. I'm not sure if it's relevant, but I had just upgraded the file system from ext2 to ext4 before starting the installation.
I've been trying to recover my lost partition with testdisk. The website has instructions for recovering a formatted partition. It looks like it's working until the instructions tell me to choose Boot and RebuildBS, which I don't see as options. Can anyone give me any advice on how to recover? How did this even happen? Has anyone had a similar issue with installation?
View 1 Replies
View Related
