I installed XandROS on my vista machine. I can access the Windows partition from Linux but in Vista I cant see the Linux partition...is there anything I can do about that?
View 3 RepliesTwo days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
When I run out of space on my Ubuntu partition, which will probably happen with me being the untidy person I am, is there a way to resize the partition in Windows or Ubuntu that will allow the other to boot? As I've heard stories of using Gparted to resize a Windows partition doesn't allow Windows Vista to boot up as it removes a crucial part of the operating system? I have adequate space to give to Ubuntu on my NTFS partition. May I also add that to install Ubuntu I had to use the partitioner that came with the installer, because the Windows Disk Manager wouldn't let me partition the NTFS drive, because it Denied my Access.
View 4 Replies View RelatedI have a Gateway PC, that came with two partitions(not it is more): Vista + Recovery
I just downloaded and installed Fedora(latest image found on the website)
1. Re-sized Vista Partition to 650 Gb(using utility that came with installation), got 50 Gb free space
2. Installed Fedora on Free space
Decided to boot back to Windows(to check if it was left intact) , Windows boots into Recovery mode. It can't find the partition !
Fedora boots up fine. When my PC starts, it give me message that I have 3-5 seconds to choose what system to boot. Disk Utility shows that my HD is split into multiple partitions.
Really need to get back my Windows Partition. All my work is on it.
I recently accidentally corrupted my windows vista partition whilst trying to extend it via gparted under ubuntu 11.04 and then cancelling it shortly after starting. Resulting in me being unable to boot into vista (I don't have another copy of any windows OS so I'd really like not to have trashed this one )
Looking on gparted now my partition is Fat32(?) and apparently only has 36mb used =/
So far I've been dual-booting Vista and Intrepid, and I decided I'd shrink down the Linux partition a bit, expand the Windows partition and reinstall Ubuntu fresh from a Live CD. I booted up from a Live CD, mounted the old Linux filesystem to check that I hadn't missed any documents to back up before I wiped the partition, and then cued up the relevant operations in GParted.
The key mistake I made was not to unmount the old Linux partition first, which led GParted to bug out and, apparently, stop my Windows partition from working. GParted no longer recognises the partition as NTFS - it tells me it's an unknown filesystem, and refuses to move or resize it.
sudo fdisk -l recognises the partition as HPFS/NTFS. Running chkdsk from a Vista recovery disk has been, so far, unsuccessful. What else can I do to either make the partition bootable again, or at least access it from Linux so I can pull my files off?
Last week I installed Ubuntu 10.04.1 on his Windows Vista machine, it has a 200GB hard-drive and he wanted 100GB for Vista & 100GB for Ubuntu on there. So instead of selecting the default partition I split it to 100GB each.
Now, however, I can't boot back into Windows and when it loads I am taken to the 'Recovery Tools' options. Have I 'cked up his partition? I can still view all the files/folders on his Windows partition from within Ubuntu however, so maybe there is a chance I can shrink down the Ubuntu partition again and restore his Windows partition?
[Code]...
I recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies View RelatedI have understood that Vista does not always play nice with third party partitioners and that it was best to use the tools *within* Vista to change its size.
I do not know, but the same might apply to Windows 7? Anyway I understand Windows 7 also has its own resize tools.
My advice to newcomers with Vista (or Windows 7) has been to use the Windows inbuilt tools to resize and then to leave un partitioned space on the drive, because until recently the Ubuntu Live CD has included an option 'Install into un partitioned space' or similar. Which was very easy.
However, with Ubuntu 10.10 Desktop CD the same option does not exist, so for beginners, or any nervous newcomer, the only practical option in most cases is to use the 'resize' facility in the Ubuntu installer.
This is a circular situation, if the Ubuntu facility resize is recommended to be avoided.
I would very much like to avoid having to tell them to use the 'advanced' option. Most of them are pretty jittery, from having used Windows for years.
I am aware that the 10.10 Alternate CD still includes 'install into un partitioned space'. Do I now tell people they need both a Live CD for initial tests and then also an Alternate CD for install?
They would see the install invitation in the Desktop CD live session and have to disregard it.
The Ubuntu 10.10 installer is, on the face of it, getting more friendly towards nervous newcomers.
Are the warnings about third party partitioners still relevant?
I'm looking to partition HD to place Ubuntu 11, and not destroy Windows Vista, here's what I see, Allocate drive space,
/dev/sda
/dev/sda1 ntfs 310641 MB unknown
/dev/sda2 ntfs 9428 MB 8346 MB
below that,
Device for boot loader installation
/dev/sda ATA ST3320820AS (320.1GB)
what to do next? *UPDATE: I think my HD is bad, I went ahead with the full install and get; Error: Input/output error during read on/dev/sda. The reason I started this was problems with HD and Vista OS, but after running Ubuntu live CD and being able to see the HD contents which showed Main partition with a boot exclamation and the recovery partition I thought it might be OK still.
After several times install & reinstall,i got a stable dual boot vista / ubuntu 10.10.,but i can't access or even see my windows partition from ubuntu,i installed my dual boot with wubu this time,in previous installation when i didn't use wubi , i didn't have such a problem & windows partition with all my files in it (windows files,media ,etc,) was easily accessible from "places" on ubuntu . I already disabled windows firewall & other security options but nothing changed
View 3 Replies View Relatedinstall fedora 11 on Vista I want to keep the windows boot loader and also install on a usb drive or a seperate partition that has 10GB free "install doesn't see partition's". Recently I installed ubuntu and had a major problem with booting, without having the usb drive connected I couldn't boot windows so uninstalled it. I'm trying to install now but install does'nt give me any option to select partitions from my drives one 320GB "portable, 3 partitions" and 80GB "main os 2 partitions one partition has 10GB free"
View 3 Replies View RelatedI need to access my EXT3 formatted partition in Vista. I am using Windows again for this game and my Ubuntu is messed up. EXT2IFS does not work in Vista, even with compatibility mode. When I open my drive it asks me to format it. EXT2FSD works but gives constant BSODs...
View 3 Replies View RelatedNow however its not letting me resize the Windows partition, mounted or unmounted. It currently occupies the whole disk. I would rather not reinstall the whole thing over again, but I will if I have to. Isnt there an easy way to shrink a Windows partition? I swear Ive done this before and it wasnt this hard. Could it be a problem with the Mint installer that now asks me if I want to unmount my disks before it goes into install mode? On this PC I would like to have
Windows XP
Mint
Ubuntu-Studio
Edubuntu
One of the E17 OSs
Puppy Linux (to create a remix)
I am probably going to put most of the linux partitions on the second laptop drive but I want to install files on a non WIndows NTFS partition.
I have windows machine and installed ubuntu in one of my partition, So i was able to select any of these OS's while booting the machine, But recently I've formatted Windows partition after this am unable to reach this ubuntu. i.e., While booting the machine no options are listing out it directly went to Windows OS.
View 3 Replies View RelatedMy old computer came with two disks, with Windows XP on one. I installed Fredora on the other.
I also resized the c: partition on the first disk and added a second partition which I formatted as fat32.
I then mounted that partition with its entry in /etc/fstab such that I could write to it as myself.
I have a new computer, 64 bit and running Windows 7, which I want to organize roughly the same way. I will install Fedora 14 on its seond disk. I've shrunk the c: partition under Windows using Disk Management. I want to create a 100 Gb D: partition on the same drive in the remaining space, and I want to be able to access both c: and D: for reading and writing by root and I want to be able to access the d: drive for reading and writing also by myself. Since it is a 64 bit machine, my choices for formatting the d: drive are HTFS or exFAT. Does it matter which I choose so that I can do what I want? How does Fedora treat exFAT?
Can anyone remind me which packages I need to add in order to be able to read NTFS file systems from Fedora? Can I also write to such a file system as root?
Can I write to such a file system as myself if I mount it properly?
Will I be able to have a partition on my computer to run Windows Vista and Ubuntu side-by-side?
View 2 Replies View Relatedi have instaled ubuntu 11.04 wubi on my pc with windows 7. i installed and everything was going ok i navigate on ubuntu already. but the problems star here i went on my ubuntu to the partition section and i format my windows partion to be the home partion and changed the nfts to ext, i did the upgrades but i forgot that theyr running yet and i restart my computer when it boot again it gaves me an error:
try (0,0) : nfts5 : wubildr
try (0,1) : ext2 :
and the windows7 says that i have to instal again. so i went to another pc and i made a cd boot and a pen boot. i burned the iso (downloaded from the ubuntu oficial site the 11.04 32 bit version) image to the cd and pen drive prperly, i adjust my boot options to star from usb or cd rom and nothing im struck.
This is my partition table:
/dev/sda1 1 4255 34178256 83 Linux
/dev/sda2 4256 4437 1461915 5 Extended
/dev/sda3 * 4438 9964 44395627+ 7 HPFS/NTFS
[code]....
I have an Acer Aspire Netbook running a dual boot with Xp and Ubuntu Netbook Version (Lucid Lynx if I am not mistaken?) Anyway I plan on selling this netbook and I need to remove the Ubuntu Partition and go back to just a full Windows Xp partition with it's recovery partition also.
View 2 Replies View RelatedI tried installing Ubuntu 10.04 LTS on my girlfriend's lenovo using a live disc. First we tried it out to show her the wireless would work fine (her previous lenovo was not ubuntu friendly at all). She's interested in keeping her windows 7 partition along with the lenovo recovery partition, so I tried doing a dual boot install. I manually moved the cursors setting the disk space on each partition, and we allowed Ubuntu to do the rest. Much to my dismay, the installation failed.
I've done some reading over the internet, and I think in our case it would be best to use a Wubi installation. We're interested in using 10.04, so where can we find a wubi installer of Ubuntu 10.04?
Also, any ideas why the installation might have failed? The iso was downloaded off the ubuntu main site, and we burned it using infrarecorder.
I am having issues with Grub 2 after installing Debian 7.8.0.The computer is a HP Pavilion 500-307nb. I made the original harddrive /dev/sdb and inserted a Samsung Evo 840 as /dev/sda. From the original hard drive (/dev/sdb), I wiped the windows partition, but left all other partitions unchanged (in case I would ever want to recover the desktop to its original state). I replaced the wiped windows partition with a swap partition and an LVM partition.These are my hard drive partitions:
/dev/sda (Samsung Evo 840)
Number Start End Size File system Name Flags
1 1049kB 3146kB 2097kB primary bios_grub
2 3146kB 944MB 941MB ext4 boot
3 944MB 94.4GB 93.4GB host lvm
4 94.4GB 1000GB 906GB guests lvm
[code]....
The partition /dev/sda3 has 2 logical volumes with filesystem ext4 that I mount to / and /home.The partition /dev/sda2 is mounted to /boot..When I install like this, Debian installs fine, however Grub2 is not installed correctly.Debian installs grub-pc which seems not able to boot the gpt partition. So I boot the Debian CD in rescue mode and execute:
mount /dev/sda2 /boot
aptitude purge grub-pc
aptitude -y install grub-efi
After rebooting, I come in the grub rescue shell, which says: error: no such device: 986f2176--4a4b-4222-83b9-8636a034b3c7.
When I then enter in the grub rescue shell:
set boot=(hd0,gpt2)
set prefix=(hd0,gpt2)/grub
insmod normal
normal
Grub and Debian start up correctly.why can Grub not start up automatically correctly? Where does the UUID 986f2176--4a4b-4222-83b9-8636a034b3c7 come from? I have reinstalled Grub several times, I have reinstall Debian several times, I have even wiped all partitions from /dev/sda and recreated a new gpt table with parted and manually set the partitions in parted. Still on each reinstallation, Grub fails because it cannot find exactly the same UUID. Since this UUID is always the same, it must be stored somewhere, but it cannot be the partitions, I have wiped them and the partition table several times.
I did though a firmware update of the Samsung Evo 840 before reinstallation, could this be a cause?Also the problem is not in grub.cfg. Grub starts correctly if I enter the commands above in the grub rescue screen and the UUID value does not appear there.
I am running Ubuntu 11.04.
I am having trouble automounting the ntfs partition. When I try to access the mounted partition, I get an error saying that I don't have permission to view the files. Also, I am not able to change the permissions as root.
The relevant line on the /etc/fstab file reads:
Code:
/dev/sda3 /media/sda3 ntfs defaults 0 0
I'm dual booting windows vista and ubuntu hardy on a multi-partitioned Dell D630. I created a partition using mkfs -t ntfs. Linux has no trouble reading/writing to it, but every time I boot into windows, chkdsk tries to "fix" the partition, fails, and tells me that the partition is corrupted. Can anybody suggest a way to convince vista that the partition is indeed ok, or else another way to create the partition so that vista can recognize it?
View 1 Replies View RelatedDoes Ubuntu 10.10 allow you to resize your windows partition and install ubuntu on the resized partition? I'm trying to get ubuntu installed on my laptop but the only option it's giving me is to delete all partitions and install ubuntu. I don't want to delete any partitions because I have backups on my second partition and the first partition has windows on it and I would like to keep it.
I've tried 10.04 and it doesn't give the option for resizing but I thought that one of the versions gives he option for this, is it 10.10? I've tried to manually resize but it won't let me because I have to many primary partitions, so I would have to delete the last partition to get it changed to extended correct?
I am currently running a dual boot machine with Ubuntu 11.04 and Windows Vista.Is there any way I can delete the Linux partition and Grub boot loader without affecting the Windows partition at all?I would also like to be able to repartition all of the space that was previously occupied by Linux.
View 2 Replies View RelatedI installed fedora 10 on my laptop as a partition with vista. However i'm now not able to boot into my vista partition as everytime I try it comes with an error saying "bootmgr" is missing. Below is whats in my grub.conf file. However I am able to access my vista partition through fedora.
default=2
timeout=5
splashimage=(hd0,4)/grub/splash.xpm.gz
[code]....
I have installed 9.10 to an existing Vista machine. Here is the fdisk
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 9 72261 de Dell Utility
/dev/sda2 10 1315 10485760 7 HPFS/NTFS
/dev/sda3 * 1315 14031 102145543+ 7 HPFS/NTFS
[Code].....
i tried installing windows 7 on a partition on my laptop but i'm getting this message:"setup was unable to create a new partition or locate an existing system partition "i tried googling and found that it has something to do with the number of partitions:my hard disk layout right now:
p1 ext4 21gb /home
p2 ntfs 64gb
p3 ext3 18gb ubuntu installation
[code]....
I got tired of dual booting on my old computer so on the new computer I am planning to run XP on VMware Player. The problem is that on the new computer neither Ubuntu or XP can "see" the FAT32 partition. I intend to use the FAT32 partition for photo images and old Windows files and need access from both Ubintu and XP.
Partition table entries are not in disk order.