Ubuntu :: Recovering Data From A Formatted Partition?
Dec 19, 2010
I just installed kubuntu 10.10, replacing an older installation. I have three hard drives one of which had all of the data I wanted to save, about 500gb. I repartitioned and formatted the other two drives and made sure that the data drive would be mounted but not formatted. When I booted into my new installation, the data drive was blank. I'm not sure if it's relevant, but I had just upgraded the file system from ext2 to ext4 before starting the installation.
I've been trying to recover my lost partition with testdisk. The website has instructions for recovering a formatted partition. It looks like it's working until the instructions tell me to choose Boot and RebuildBS, which I don't see as options. Can anyone give me any advice on how to recover? How did this even happen? Has anyone had a similar issue with installation?
I recently suffered a hard disk failure, meaning I had to replace the faulty device. After attempting to mount the old faulty hard drive using and external caddy, I got the following message... Unable to mount 144 GB Filesystem Error mounting: mount: wrong fs type, bad option, bad superblock on /dev/sdb5, missing codepage or helper program, or other error In some cases useful info is found in syslog - try dmesg | tail or so
I'd like to attempt to recover what I can from my /home directory but unfortunately I use encryption (although I do actually know my pass phrase). What procedures and software can I use to try and recover data from this drive?
I was trying to delete a logical drive in windows xp and the damn disk management tool in windows not only deleted my other windows partition but also my linux /data ext3 partition. Now I have a unallocated space in place of these partitions. The data is still there but the entries in the partition table have been removed. So how do I recover my partition. I was trying to use the following tutorial. [URK]
I used the sudo parted /dev/sda -- and then rescue START END command and could get back the /data partition. But it gives me the following error while mounting the partition. mount: wrong fs type, bad option, bad superblock on /dev/sda7, missing codepage or helper program or other error. In some cases useful info is found in syslog - try dmesg | tail or so.
What does this mean. How to I fix this? Also when I try to recover my windows partition using parted it scans for a while and then does nothing. It doesnot ask for writing the lost partition in the partition table. What do I do?
I accidentally formatted a 2TB drive of mine (big oops), but have recovered 2 of the 3 partitions using testdisk. My third partition is a LUKS encrypted partition. Testdisk managed to recover a piece of it, but it won't mount as most of it is unallocated. The partition originally occupied all space from sector 2,930,272,065 to the end of the disk -- sector 3,907,024,064. That is about 473 GBs. Currently, the partition only uses space from sector 2,930,272,065 to 2,930,288,129, about 7.84 MB.
The rest of the space is unallocated. Now what I need to do, is to expand the partition so that it occupies all the space that it used to. How would I do this? I cannot resize the partition, cause it would try to recreate the filesystem AFAIK and I don't want that, as it will fry my data. My data is not terribly important, but I would rather have it then not. I attached a screenie of kpartitionmanager. The partition in question is /dev/sdb2.
I have recently recovered from an HDD failure on my Drobo. One of the disks died and corrupted the entire array (which is not supposed to happen). I have since managed to copy the data off onto smaller disks and after replacing the failed drive, have copied everything back.
Now that im up and running again, i was wondering how this situation would play out on encrypted disks, or in the case of a drobo a large encrypted partition (as you cannot encrypt the entire array).
Would i still be able to recover the data if i were to encrypt it? It is a 4.2TB array, and i assume that I would need to copy the data in its entirety to recover it, so using multiple smaller disks would be out of the question right?
By mistake I formatted an ext3 partition on my external hard-drive. Now it has turned into a vfat filesystem. Is their any chance of recovering the lost data?
I have an external USB hard drive that I need to recover some data from, but I see from fdisk -l that the partition uses LVM:
Code:
[root@localhost ~]# fdisk -l /dev/sdd Disk /dev/sdd: 160.0 GB, 160041885696 bytes 255 heads, 63 sectors/track, 19457 cylinders Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
I've followed various lvm tutorials all of which describe setting up lvm from fresh on empty disks. Unfortunately non mention how to 'install' new a drive that was previously set up with lvm. I have had a go anyway and may have now lost my data. Here's what I've ended up with (the partition in question is sdd1):
Code:
[root@localhost ~]# pvdisplay --- Physical volume --- PV Name /dev/sdd1 VG Name vg02
[code]....
I've tried mounting with other fstypes, but all give the same error.
following problem. A friend phoned me in despair. Her Ubuntu didn't start any more - ASUS-Laptop switched on stops at a ramfs-prompt. I started Puppy-Linux from DVD-Drive. Worked fine. But puppy can't mount her /dev/sda1 partition either. At least you can see that the partition is still there. Fsck stops with an error. May be the initial problem is a sort of bad hardware by which bad bytes were written to the hard drive. Hard drive and/or memory could be replaced but not the data.
While trying to create a bootable SD to install Ubuntu on a netbook, I accidentally formatted a part of a removable HDD that was connected to my computer. If I remember correctly, the partition I formatted wasn't the main partition of the HDD. In that case, does it make sense that the whole disk was wiped out? On that HDD there's a year worth of work, I really need that back.
I was using PhotoRec with some luck: it started to recover files, but with no names, which is almost useless, considering a lot of it are recordings - useless without their names. Is there any good recovery program that will recover all my files incl. names? Is there a easier oprtion, considering that I think I didn't really format the big partition of the HDD? What may it have been, the small partition?
I have an external 3.5" USB 250Gb HDD which is showing symptoms of hardware problems (repeated /var/log/messages errors of "reset high speed USB device using ehci_hcd"). This was originally plugged in to my NSLU2 running Debian Etch. I have just installed Ubuntu Desktop 9.10 to a spare Pentium-3M laptop and was hoping to copy the contents of this HDD to a fresh drive. However, I cannot mount it even read-only; mount -o ro /dev/sde3 /mnt/disk fails, and the /var/log/messages error is "recovery required on readonly filesystem", "write access unavailable, cannot proceed". I cannot understand why mounting a disk read-only should require write access. Following advice I googled elsewhere, I tried running mke2fs -n /dev/sde3 to try to list the alternative superblocks - but once again I got the error that the device was read-only. How can I go about accessing the data on this disk?
I wanted to format my Flash USB drive !! and by mistake i choose my external Hard Drive (NTFS) and formated the drive gain to NTFS later when i released that this is not the USB flash drive it was too late to abort or do anything
is there any way to recover my lost data ?! i mean i know about the tools like Recuva ! But the problems that it recover data mixed up in each other
I'm on the latest Ubuntu OS on my netbook trying to make a USB Startup Disk. I have a 1GB USB and a 500GB hard drive plugged in to then netbook. I run the USB Startup Disk program, and it tells me I need to format the USB drive. Okay, so I press format, only to realize that I'm formatting the 500GB hard drive.However, when I pressed format it give me an error saying the disk could not be mounted. I did something on Disk Utility and now I have a FAT32 system on the hard drive with nothing in it. Now my ultimate question is, am I able to recover the data that was on the hard drive?The hard drive was formatted in HFS+, it was a Mac-formatted hard drive. Will I need to use a Mac in order to try to restore my files?
My machine has dual boot windows xp and ubuntu 10.04. Today accidently i deleted two of my ntfs drive which contained vital projects of my college. Can anybody help me to recover my lost data.
Could I please have some recommendations for Data Recovery of a Formatted Drive. There are so many choices out there that I don't know which one I wanna use.
I am new to ubuntu. I was on windows 7 32 bit, computer was running slow with viruses and full hard drive so i installed ubuntu 10.10 32 bit as i believe it to be more secure. Before installing Ubuntu OS I made a backup DVD-RW data disk, it had my brothers holiday pics when he went turkey and morroco. Once I installed ubuntu I needed a DVD-RW and quick formatted the wrong disk. Is it possible to recover the data? I've read somewhere that the data is possibly can be recover.
I have a DVD that I want to recover. The problem is that it will not mount because it has a small scratch at the beginning of the first track. Is there any way to force mount the DVD and recover at least the unscratched part of the DVD?
So I've pulled two hard drives out of my busted windows xp system (dead mb) and I'm trying to get some data off of them. The drives are in raid 0, so my friend told me that I might be able to do something if I use linux. Some late night searching on the internet directed me to a few resources, one of which was this forum. I've tried 2 methods, neither of which have worked.
1. mdadm
ubuntu@ubuntu:~$ sudo mdadm --detail /dev/sdb mdadm: /dev/sdb does not appear to be an md device
2. dmraid
ubuntu@ubuntu:~$ sudo dmraid -s /dev/sdb: "sil" and "hpt45x" formats discovered (using hpt45x)! ERROR: sil: wrong # of devices in RAID set "sil_agafdhcebccj" [1/2] on /dev/sda ERROR: removing inconsistent RAID set "sil_agafdhcebccj"
[code]....
I've got some files for work that I'd really like to get off there. I've played with unix a bit in college and I've ran ubuntu before, but usually using the GUI, so a lot of this stuff is over my head. But from what I gather, my system thinks that one of the drives isn't a raid drive?
While install Ubuntu on an existing xp pro I accidentally formatted my hard disk. Is there any way to get back my files it contains e books pdfs photos music files and movies. Data recovery. My Hard Disk 80GB SCSI NTFS.
A friend of mine somehow managed to accidentally format her USB key the other day. It had all the photos of her daughter on it and she's more than a little upset about it.
I've told her not to fret too much just yet and that I'll have a look to see if there's any way to recover any of the data (specifically the photo's, she's not overly fussed about the rest)
I've had a look through the web, and foremost looks like it's the most promising option but I don't want to start messing around with it until I've asked my fellow ubuntu users for advice and thoughts.
I have recently gotten hold of a device that helps me plug my old ATA/IDE hard drive to my computer and view my old files that I wish to recover. I am using Ubuntu and the harddrive that I wish to retrieve the data from also has an Ubuntu install on it. The files I wish to recover are old .doc files, which I want to keep to remember my old writings.
The problem I have encountered arises when I wish to open some of the files. The icon for some of the files, which happen to be my best writings, has an X on the top right, indicating that I cannot view the contents. When I click on the files, the following error message pops up: "Access to /media/c885571b-a6e5-4a2d-937a-78af7050910/george/Courses/hist388/Passion.doc was denied."
Now, I am guessing that I need to be able to log in as superuser or something to be able to access these files, so I logged in my terminal as super user by following the instructions outlined on this page: [url]
I still did not have the sufficient access required to be able to open the files that I would like to retrieve.
I've got 10.10 running trying to recover files from 10.04/10.10 I don't know what to call it. I did update-manager -d but all I get is a bunch of failed packages when I try to run it, so I downloaded the full RC iso. Now I'm trying to recover my stuff from the HD using a live-usb. The only problem is, when I try to copy the files onto my SD card, I do not have permission to access some of the stuff on the HD and some of the stuff like the "Desktop" I do.
Since recently I have installed windows (dont worry I will be back to ubuntu soon enough but I've ran into some trouble), I had installed windows on my main hard disk (I couldn't install windows on my 2nd hard disk for some reason).
There were 2 partitions on the main hard disk, 1 which had all my data and another which had all the system fyles for ubuntu on it I believe.
Now I deleted the small system fyle partition and installed windows over it thinking I'd have all my data on the other partition when I needed.
But when I started up ubuntu with a live USB (I had made it prior to deinstalling ubuntu because I wanted to go back asap) and browsed my files, I noticed that I couldn't get to my private data anymore!
The /home/user partition is still there but it only has a file in it which says something like "recover-private-data.desktop" but when I double click it (made it executable) it just pops up a terminal real fast and disappears.
I have a laptop with Fedora 12 on it and I accidentally did an dd if=/dev/zero of=/dev/sda (since then I learned to think before I type) anyway, I stopped it in time (I hope), it only zeroed first 60 MB. So, it killed partition table and boot partition. What I need is home partition, and it should be untouched. home is on a LVM device (fedora default install settings), and I tried testdisk (supposedly handles LVM) but it found only one partition (I guess it's a LVM physical device, as there should be 3 partitions, /, /home and swap) and said it's not recoverable.
Is there a way to get access to files on that partition (partition itself, including file table should be untouched). Partition contains various data (video, audio, and text) I need back (and it's my data, not backed up, and not something I can redownload). Is there any software that can help me with this, and if not, is it theoretically doable (I believe it should be, as the partition itself is not damaged, so it should be possible to read file names and link them with data on disk, am I right)? what is a good way to image the disk, so I can reinstall the laptop while trying to rescue data from image?
I have 2 HDD in my PC . The 2nd one is a 1TB Western Digital Harddisk which was formatted in Win XP NTFS and just 1 partition, using it for archieve (Film- Music - Apps ... ). I was trying to use fdisk command , but unfortunately destroy the data , format and partition it like this picture :
[URL]
recover my data . Any procedure or software ? By the wayy , I use Win Xp & Ubuntu 10.04 . According to the problem and the above picture in which OS should I recover my data - Ubuntu or WinXP ?
I've just got a STA/IDE to USB 2.0 gadgetas a quick and dirty way to get data off a HDD Plugged everything in hoping with no particualr reason that it would work like a USB stick. Device notifier spotted drive but wouldn't mount it
Code: dmesg | tail [20197.639369] sd 8:0:0:0: [sdb] Result: hostbyte=DID_OK driverbyte=DRIVER_SENSE [20197.639373] sd 8:0:0:0: [sdb] Sense Key : Medium Error [current] [20197.639378] sd 8:0:0:0: [sdb] Add. Sense: Peripheral device write fault [20197.639383] sd 8:0:0:0: [sdb] CDB: Write(10): 2a 00 00 60 7c cf 00 00 08 00 [20197.639391] end_request: I/O error, dev sdb, sector 6323407 [20197.639397] Buffer I/O error on device sdb6, logical block 8210 [20197.639399] lost page write due to I/O error on sdb6 [Code]....
Today I wanted to make a backup of my Ubuntu server. Since the program wasn't working for me, I rebooted my computer and right now it wont boot. Now I entered recovery mode and I'm trying to recover my /var/www and /etc/mrtg folders. I want to copy them to my USB-Stick but Ubuntu wont do this.
The command I tried: Code: cp -r /var/www /dev/sdg1/www I already created the folder via a other system. I also tried to mount the USB stick: Code: mount /dev/sdg1 /mnt/usbe But im getting the following error: error while loading shared libraries: /lib/libsepol.so.1: Invalid ELF header.
I am trying to transfer files from a SATA hard drive with Windows Vista (Home Premium) installed on it. Some files I can easily copy over, others just say Access Denied.
I'm sure permissions is part of the issue, unofrtunately Windows is unable to boot at all (surpise surprise) so I can't adjust anything from within in. I know with XP drives I can easily copy and paste onto my Ubuntu machine. I'm using a SATA to USB converter that let's me plug it in and my desktop reads it like an external hard drive.
I've gone into the properties and under permissions it shows my account as having access to Create and delete files under folder access amd "---" under File access. My group and others show None and --- for Folder and File access. I can post a link to a screenshot tomorrow. I've tried to also select Read and Write for File access but it goes back to the dashes before I can apply it.
I am running 64 bit Ubuntu 9.10 and do not have the sharing aspect installed. Any questions please feel free to ask me.
I was previously running postgresql 8.3, but upgrading to Ubuntu 10.04, has installed postgresql 8.4 and I'm now unable to start 8.3. I don't mind using 8.4, but I need to recover the data from my 8.3 installation, But I'm not sure how to do this as I can't start the 8.3 server, and 8.4 can't read my old data directory.
