I have installed 9.10 to an existing Vista machine. Here is the fdisk
Code:
Device Boot Start End Blocks Id System
/dev/sda1 1 9 72261 de Dell Utility
/dev/sda2 10 1315 10485760 7 HPFS/NTFS
/dev/sda3 * 1315 14031 102145543+ 7 HPFS/NTFS
[Code].....
I have drive C/ with Vista, D with as of now, nothing and a third logical partition with Ubuntu on.
I want to do a clean install of Vista on top of my current system, just on C.
Will this re-install the Windows MBR and prevent Grub2 from booting? If so, how to I re-set grub2 as the MBR?
I recently installed Ubuntu 9.10 onto my second hard drive, and now I can't boot into Vista (installed on hard drive #1). Grub2 just doesn't seem to be recognizing that there is a Windows Vista installation on the first hard drive.
I followed this guide (with Fabien's changes) because it seemed like they were having the exact same problem. But after rebooting, Vista is still not showing in the GRUB menu. In fact, the GRUB menu doesn't even show up unless I press Shift because it thinks that Ubuntu is the only OS installed on my computer.
My results with boot_info_script:
Code:
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=e94a058d-1d19-4a98-924b-1a5fce405bdd)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb sda1:
[Code]....
When I was installing Ubuntu to HD2 (the 500gb one), I got a peculiar message saying that Windows was installed on it. There wasn't anything on HD2 though, because Windows Vista was most definitely installed on HD1.
However, if I chose to overwrite HD1 with Ubuntu, the message wouldn't come up. It seemed like the installer was confused as to which hard drive actually held my Windows Vista install.
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies View RelatedI have a dual boot system. I need dual boot as my dictation software is only available for Windows. In the future I am going to try a virtual machine, but dictation and audio did not work properly the last time I tried in VM. But unfortunately for now I have a dual boot machine with Vista and Debian 6. Unfortunately, I am going to have to reinstall Vista. Or to be more accurate I'm going to install the 64-bit version instead of the 32 bit that came with the computer. I have the 64-bit version that I no longer use from one of my other computers.
Anyway, I have to install Windows which will overwrite my grub2. Is there anyway I can make a backup or reinstall grub2 after I install Windows. I really don't want to reinstall Debian 6 squeeze. Can they make some sort of a backup of gurb2 before I do this. I checked out the Internet and I found something called Super Grub2. It apparently will allow me to boot back into Debain 6 so that I can install grub2 again. Assuming, Super Grub2 even works then how do I reinstall grub2 once a boot into Debian 6? Has anybody tried Super grub2, does it work? It's kind of hard to test it, with a working version of grub2.
Two days ago I repartitioned my laptop HD and added the latest Ubuntu (2.6.35-25-generic) to the existing Vista and existing Ubuntu (2.6.32-28-generic via upgrades from 9.14(?)). Prior to this install it was using Grub with menu.lst from the old/upgrade Ubuntu. After the install the boot menu labels the partition with Vista as the Windows Recovery partition and the recovery partition item is no longer present.
At first I wondered how I could get Vista to boot. I found that SuperGrub cd would boot it OK. Then, it dawned on me that the boot menu item was not the recovery partition, but instead the Vista OS partition mislabelled . Vista loads just fine from it. The recovery partition is no longer listed as it was with Grub/menu.lst. SuperGrub will not boot the recovery partition, showing an error "missing BOOTMGR".
'os-prober' produces--
root@Toshiba:/home/deh# os-prober
/dev/sda2:Windows Recovery Environment (loader):Windows:chain
/dev/sda7:Ubuntu 10.04.2 LTS (10.04):Ubuntu:linux
[code]...
I edited boot/grub/grub.cfg so the boot menu item is labelled correctly, but suspect that it will revert back when there is an upgrade.
I installed XandROS on my vista machine. I can access the Windows partition from Linux but in Vista I cant see the Linux partition...is there anything I can do about that?
View 3 Replies View Relatedi had ubuntu and slackware installed together for a while, i just needed xp to do some native language work so i installed it on my extra partition but then i messed up the grub menu, however i reinstalled it from live cd.. but now the problem is i dont know how to add a xp in that.
i'll give you my fdisk -ls output :
Quote:
/dev/sda1 1 12803 102840066 83 Linux
/dev/sda2 12804 14267 11759580 83 Linux
/dev/sda3 14268 15035 6168960 82 Linux swap / Solaris
/dev/sda4 * 15036 19457 35519715 7 HPFS/NTFS
[Code]....
How to partition Ubuntu/Vista in proper order
View 9 Replies View RelatedI recently accidentally corrupted my windows vista partition whilst trying to extend it via gparted under ubuntu 11.04 and then cancelling it shortly after starting. Resulting in me being unable to boot into vista (I don't have another copy of any windows OS so I'd really like not to have trashed this one )
Looking on gparted now my partition is Fat32(?) and apparently only has 36mb used =/
I get the error - 'You must specify the filesystem type'.I used the syntax on the GRUB2 page:mount /dev/sdb3 /mnt but it returns the above error.Is there additional parameters to the code???
View 1 Replies View RelatedI installed fedora 10 on my laptop as a partition with vista. However i'm now not able to boot into my vista partition as everytime I try it comes with an error saying "bootmgr" is missing. Below is whats in my grub.conf file. However I am able to access my vista partition through fedora.
default=2
timeout=5
splashimage=(hd0,4)/grub/splash.xpm.gz
[code]....
I downloaded Ubuntu about 5 months ago and love it.Problem is, I didn't know if I wanted to make it permanent on my computer, so I used the option which allowed me to download it as an application on my Windows Vista Control Panel.How can I increase the partition (I think I only have 9 GB left on my home folder) without loosing all of the preferences, applications, and hardware solutions that I have put on there?
View 1 Replies View RelatedI crated unallocated space on vista disk using EASEUS partitioning software and installed ubuntu on it. I chose "use the largest free space" for ubuntu installation. Installation goes fine but only vista loads on restart...where is the installed ubuntu?
View 5 Replies View RelatedSo far I've been dual-booting Vista and Intrepid, and I decided I'd shrink down the Linux partition a bit, expand the Windows partition and reinstall Ubuntu fresh from a Live CD. I booted up from a Live CD, mounted the old Linux filesystem to check that I hadn't missed any documents to back up before I wiped the partition, and then cued up the relevant operations in GParted.
The key mistake I made was not to unmount the old Linux partition first, which led GParted to bug out and, apparently, stop my Windows partition from working. GParted no longer recognises the partition as NTFS - it tells me it's an unknown filesystem, and refuses to move or resize it.
sudo fdisk -l recognises the partition as HPFS/NTFS. Running chkdsk from a Vista recovery disk has been, so far, unsuccessful. What else can I do to either make the partition bootable again, or at least access it from Linux so I can pull my files off?
Last week I installed Ubuntu 10.04.1 on his Windows Vista machine, it has a 200GB hard-drive and he wanted 100GB for Vista & 100GB for Ubuntu on there. So instead of selecting the default partition I split it to 100GB each.
Now, however, I can't boot back into Windows and when it loads I am taken to the 'Recovery Tools' options. Have I 'cked up his partition? I can still view all the files/folders on his Windows partition from within Ubuntu however, so maybe there is a chance I can shrink down the Ubuntu partition again and restore his Windows partition?
[Code]...
I recently upgraded my Ubuntu from 9.10 to 10.04 and now it's messed up my Windows Vista partition. When I try to load Windows it boots to a strange login menu with low resolution. It then takes me to a screen with options like Repair/Fix, Recovery, Complete Recovery... I'll click Repair and and then it will say No errors found, Shut down, Restart.
View 2 Replies View RelatedI have understood that Vista does not always play nice with third party partitioners and that it was best to use the tools *within* Vista to change its size.
I do not know, but the same might apply to Windows 7? Anyway I understand Windows 7 also has its own resize tools.
My advice to newcomers with Vista (or Windows 7) has been to use the Windows inbuilt tools to resize and then to leave un partitioned space on the drive, because until recently the Ubuntu Live CD has included an option 'Install into un partitioned space' or similar. Which was very easy.
However, with Ubuntu 10.10 Desktop CD the same option does not exist, so for beginners, or any nervous newcomer, the only practical option in most cases is to use the 'resize' facility in the Ubuntu installer.
This is a circular situation, if the Ubuntu facility resize is recommended to be avoided.
I would very much like to avoid having to tell them to use the 'advanced' option. Most of them are pretty jittery, from having used Windows for years.
I am aware that the 10.10 Alternate CD still includes 'install into un partitioned space'. Do I now tell people they need both a Live CD for initial tests and then also an Alternate CD for install?
They would see the install invitation in the Desktop CD live session and have to disregard it.
The Ubuntu 10.10 installer is, on the face of it, getting more friendly towards nervous newcomers.
Are the warnings about third party partitioners still relevant?
I am running vista 64x and i partitioned unbuntu 10.10 on my computer.
I deleted the ubuntu partitioned from my computer through Vista and made it all one drive. SO now all my computer has i the recovery partition which is 9.61GB and the main Vista partition that is 287.65GB. That is ALL.
I restarted my computer and it gives me the following error:
error:
I know you have answered millions of questions about that error, however the problem i have i cant find a solution for anywhere.
Now, i have a GParted disk to manage my paritions because i have had this problem before. However when i put it in the computer it only shows my 2 partitions. (The recovery one and the vista one) Both of them are "unmounted"
How do i disable grub from loading through something like GParted that is boot loaded off a disk at system startup? I only have vista on this computer, but i cant get to it because GRUB is in the way. (I do not know if its grub1 or grub 2, but its ubuntu 10.10)
I DO NOT have a recovery disk for my vista computer, ive lost it, however i have the Windows 7 Upgrade disk, but that will not load from the disk when i turn on the computer.
I'm looking to partition HD to place Ubuntu 11, and not destroy Windows Vista, here's what I see, Allocate drive space,
/dev/sda
/dev/sda1 ntfs 310641 MB unknown
/dev/sda2 ntfs 9428 MB 8346 MB
below that,
Device for boot loader installation
/dev/sda ATA ST3320820AS (320.1GB)
what to do next? *UPDATE: I think my HD is bad, I went ahead with the full install and get; Error: Input/output error during read on/dev/sda. The reason I started this was problems with HD and Vista OS, but after running Ubuntu live CD and being able to see the HD contents which showed Main partition with a boot exclamation and the recovery partition I thought it might be OK still.
drive is as follows:
NTFS Partition (Storage)
NTFS Partition (Win7)
Ubuntu
I am trying to put GRUB2 on the Ubuntu partition, but it will only let me pick the first two. If I pick the Ubuntu partition in the last dialog bix, it is listed as /dev/sda-1 I also have no idea why is says "-1", because the first two are fine at 1 and 2 respectively.
I first noticed this behaviour with Fedora 9, so I guess the install process is behaving as intended. However, when I install grub in the linux boot partition, SDA 6 with my current configuration, I would like my Vista partion to remain active. I use EasyBCD in Vista to control booting, as I have more Vista systems than linux systems. Currently, I have to boot the Vista install DVD after every Fedora install to do a start up repair on the hard drive. After the Fedora install, the Vista partition is marked inactive and needs to be marked active again. IMHO, if the linux boot loader is loaded in the linux boot partition, the currently active Windows partition should be left active. Unless I'm missing something, the MBR on the drive is going to be pointed at some other partition than the linux partition whenever grub is installed in the linux boot partition instead of the MBR. It's not that hard to activate the Windows partition, but after installing a few F12 alpha snaps and beta TCs and RCs, it's getting annoying. Any chance this can be changed?
View 1 Replies View Relatedthis might deviate from "installation" theme.. I'm writing an immediate problem since the last thread: [URL] problem is the vista partition is impossible to shrink now, though there's 50 G free space. Every try found in : [URL] does not work including Perfect disk degrag. I think this is because fedora system is there. some code is written to vista partition..that vista cannot handle.....
View 2 Replies View RelatedI have a Gateway PC, that came with two partitions(not it is more): Vista + Recovery
I just downloaded and installed Fedora(latest image found on the website)
1. Re-sized Vista Partition to 650 Gb(using utility that came with installation), got 50 Gb free space
2. Installed Fedora on Free space
Decided to boot back to Windows(to check if it was left intact) , Windows boots into Recovery mode. It can't find the partition !
Fedora boots up fine. When my PC starts, it give me message that I have 3-5 seconds to choose what system to boot. Disk Utility shows that my HD is split into multiple partitions.
Really need to get back my Windows Partition. All my work is on it.
I recently used a GParted CD to resize my partition with Vista installed on it in order to make room for another partition in which I installed Linux onto. I, unfortunately, did not back up my data. My Vista partition now does not show up in Grub and when I set it to just boot to the Vista install it will never boot and is stuck in a loop.
I tried using this guide to try to get it back. My problem comes about halfway through this guide when I go to repair my Vista installation nothing shows up under installations. I would really like to get my data from the Vista partition. I guess if I'm SOL then at least I'll remember to backup my data next time..
boot up in to chameleon, lists only Mac OS X as a boot option. Reboot, load Ubuntu 10.4 install cd, get to a terminal, mount /dev/sda3 /mnt grub-install --force --root-directory=/mnt/ /dev/sda3
reboot, let chameleon come up, it sees both Mac OS X & Ubuntu partitions and I can boot to either or happily, now here is the problem... If I select linux and boot in to linux from chameleon, i am brought to the grub menu, where i can select the first choice which is normal ubuntu 10.4 and every thing is great... until I reboot and my linux partition no longer shows up in chameleon, as if tthe act of booting in to grub is changing something / deleting itself from the partition? and I have to do the whole thing over again. SO, not having to even go in to OS X, I'm not sure thats really the concerns more as I'm doing something wrong with grub.
I wanted to start exploring web development and perhaps hosting my own server as well as learning about linux and all the things that go with it so I downloaded the ubuntu 9.1 Server edition and burned it to a CD. I thought to put it on my Dell laptop as it is newer than my main PC and I could bring it to and fro between class. It had Vista installed and I definitely wanted to keep that in the meantime until I got more familiar with Ubuntu. The laptop has a 320GB hard drive with a 10 GB recovery partition. I went ahead and formatted the 10GB to make room for ubuntu. Also I was able to "shrink" the main windows partition by 16GB to make even more room. I could not combine the two small drives but alas. I had hoped to use the 16GB partition for the main install and the 10GB for a necessary swap drive (I am completely new to all this).
So I reboot on the server CD and get to the partition section. I was following this guide here: [url]
It seemed I did not want to do anything "guided" or "automatic" because the options were listing the entire drive and again i wanted to keep my vista untouched. So I go to manual partitioning and although the guide didn't go into enough detail I went ahead and assigned an "ext2" filetype to the larger partition and a "swap" to the smaller partition. Then I went to write changes to disk and after completing one of the two successfully the installer failed to configure the swap drive. I don't know why. I restarted to make sure windows was OK and surely it was not, as I got the dreaded "missing operating system" screen. I ran the windows recovery CD and lo and behold it could not find any drives at all, much less repair them. The data I had on the vista partition were not particularly vital, but it would be nice to have it back.
So my questions are, is there a way to recovery the windows partition? And how is the correct way to configure a dual boot system with Vista and Ubuntu 9.1 Server edition?
I'm having an issue installing Ubuntu with Windows 7 Home Premium 64-bit through Wubi. The Wubi installation works great and Ubuntu seems to install after the first reboot after selecting Ubuntu from Windows' boot menu, however whenever I select Ubuntu from Windows' boot menu after Ubuntu installs and it reboots for the second time, it loads the GRUB bootloader, however Ubuntu isn't listed at all.
Windows 7 is listed twice and Windows Vista is listed (seems it picks up the recovery partition for Windows 7 as Vista) and when I select the first Windows 7 from the GRUB bootloader, it just goes back to Windows' boot menu with Windows 7 and Ubuntu as the selections. If I select the second Windows 7 from the GRUB bootloader, it'll boot Windows 7 like normally. It looks like Ubuntu is nowhere to be found. Because of that, I just ended up uninstalling it.
I have a Lenovo thinkpad T400 with Vista x64 that I want to dual-boot with fedora 10. The T400's original config has 3 primary partions:
1) Vista boot partition (some weird partition that it only uses to boot... this is my first time using Vista so I don't know the details, but I think it has to be there and it has to be a separate partition from the "data" partition)
2) Vista data partition
3) Lenovo Rescue and Recovery partition (a separate bootable partition that is used for recovery, backups, ...)
My first attempt was to shrink the recovery partition and add a new extended partition that has the two standard fedora logical volumes and an extra NTFS to be shared between the OS's (I usually use FAT32 for this one, but NTFS support seems to be pretty solid now).
Everything was fine, but I couldn't boot into the rescue partition. According to this site:
[URL]
You *have* to have a linux boot partition be your primary partition. Other people have told me the same thing and that site has an explanation, but I don't get it =)
So, it seems that I need 5 primaries (3 original vista/lenovo primaries, 1 linux primaray to put the boot stuff into, and 1 extended for everything else) to make this work (which is not possible). Can anyone think of something else I could do (other than getting rid of Vista and the Lenovo stuff and giving them both the finger?) I'm thinking maybe I could make an extended partition and move one or more of the Vista/Lenovo partitions in there, but I'm not sure if they could boot.
The problem is, on a machine, you can only have 4 primary partitions. sda1 and sda2 are my Vista and Recovery partitions respectively, which eliminates two of my primary partitions already. I myself have never used logical partitions, and was wondering if any of the partitions the Beginner's Guide recommends (/, swap, /var, and /home) could be made logical, and if I even need a swap partition.
View 5 Replies View Related