Dual booting Ubuntu and XP, I've been using ext2fsd for a long time.Recently I did a fresh install of Lucid. Now when I try to run ext2fsd from XP, it tells me that my ext3 partition needs to be formatted.I vaguely recall having had and solved this problem in the past, but I just can't find the solution.
View 8 RepliesBy mistake I formatted an ext3 partition on my external hard-drive. Now it has turned into a vfat filesystem. Is their any chance of recovering the lost data?
View 4 Replies View RelatedI am trying to install a harddisk, which is already formatted as ext3, into my Qnap NAS box. The web interface of the NAS box shows, that the harddrive has been detected, but I am not able to mount any of its partitions.This is the output from fdisk -l:
Code:
Disk /dev/sdb: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
[code].....
I have a question, i accidentally formatted an lvm volume as ext2 after creating it. Then of course, we copied a ton of data to it before I realized it was ext2. (I guess ext2 was the default when using mkfs without a -t) Anyway - can I just use tune2fs -j on the LVM just like I would a /dev/sdx device?
View 2 Replies View RelatedRunning Debian Squeeze, I used gparted to wipe the fat partition on a 8GB USB thumbdrive, and repartitioned it with ext3. Everything goes fine, and gparted and fdisk -l both show the correct partition, but I can't seem to mount it, and automount in gnome fails as well.code...
View 5 Replies View RelatedI've lost my admin password on my current Windows OS and would like to install Linux Ubuntu or a similar user-friendly distro of Linux alongside, see how that goes and possibly reformat my PC with Linux as I was told it would convert NTFS formatted drives to ext3, not delete them.
View 9 Replies View RelatedThere were some files residing on my ext3 file system, using Ubuntu as my linux distribution. Yesterday I formatted the hard drive using a windows install CD, rewriting it with a new NTFS partition. I'm willing to restore my personal files deleted due to this format.
View 3 Replies View RelatedI usually repartition a disk by backing up, deleting the partitions, formatting them and repartition. I just did a 200 gig backup (so i am safe) and i want to join 2 (ext3) partition together, sdb1 (data4) and sdb5 (data5) into one big partition. Is there a way to do it without scraping the data in sdb5 (data5). It would save me from rewriting the data back to that new partition (200 gig is time consuming).
View 1 Replies View RelatedI just installed kubuntu 10.10, replacing an older installation. I have three hard drives one of which had all of the data I wanted to save, about 500gb. I repartitioned and formatted the other two drives and made sure that the data drive would be mounted but not formatted. When I booted into my new installation, the data drive was blank. I'm not sure if it's relevant, but I had just upgraded the file system from ext2 to ext4 before starting the installation.
I've been trying to recover my lost partition with testdisk. The website has instructions for recovering a formatted partition. It looks like it's working until the instructions tell me to choose Boot and RebuildBS, which I don't see as options. Can anyone give me any advice on how to recover? How did this even happen? Has anyone had a similar issue with installation?
I was having trouble with an old lvm partition so I pulled all the data off and now want to re-partition it as an ordinary ext3 partition.
But gparted offers only Logical Partition for that partition. How do I convert that partition to a Primary or Extended partition - and which do I want?
I had 3 partitions on my hard dive, Windows 7, Ubuntu, and just junk on the other. I installed Ubuntu in a way where it went to the GRUB filesystem? first, where it ask me to start in linux kernel 2.38.6 (can't really remember the kernel exact name) which was ubuntu, some other options, recovery mode, and at the very bottom was the one to go to Windows 7. I was in Windows and I wanted to get rid of my junk partition but I formatted the Ubuntu partition by mistake.
Now when it boots up it saying:
Error: unknown filesystem. grub rescue>
I hope there is a way to save my files on Windows. I tried to reinstall Windows 7 back on my computer but it wouldn't go through since the grub startup thing is the main one, not the windows one.
My hard drive has the following partitions:
/dev/sda1 ntfs (reserved for system)
/dev/sda2 ntfs (win7)
/dev/sda3 extended partition with the following:
[code]....
My colleague needed a backup for some of his loose media, so I assured him I could back it up on our Lab's Lacie 2TB external. His windows partition was incredibly sluggish, so he booted into ubuntu 11.04 and we partitioned and formatted an NTFS volume for him to transfer his stuff to. The format went fine, space was available, and I left him to transfer all of his stuff from his dell studio1555. He finished and reformatted his computer completely.
The NTFS is not recognizable by any of the OS now. Ubuntu sees it as a single partition without any data, whereas before the transfer, the partition map was clearly visible. Windows does not recognize the drive at all. OS X does recognize the partition, but it shows up as an apple_scratch volume, which is quite a bit frightening, considering a scratch volume is essentially blank. To elaborate, all of the files were in his windows partition, and were transferred within a relatively fresh install of ubuntu (not much had been done on it). The partition was made in diskutility in ubuntu (the GUI), but the rest of the drive was HFS+ formatted.
I was installing 10.10 x64 today. I wanted to manually partition the disks, since I have a /home partition from a 9.10 installation which I want to keep.Unfortunately, I selected to convert the ext3 /home partition to ext4 and didn't realise it was formatting the partition until it had just begun. In desperation, I pulled the power plug, but now I can't access the partition (using the LiveCD) - comes with an input/output error.What are some strategies to recover the data on the partly formatted partition? I don't think much, if any, was actually formatted.
View 4 Replies View RelatedI need to access my EXT3 formatted partition in Vista. I am using Windows again for this game and my Ubuntu is messed up. EXT2IFS does not work in Vista, even with compatibility mode. When I open my drive it asks me to format it. EXT2FSD works but gives constant BSODs...
View 3 Replies View RelatedI have a new Asus Eee Pc 1215n and installed on it Ubuntu 10.10. This way it was configured as dual-boot with 4 partitions. One for Windows7 one for Windows recovery, one for Linux swap and one ext4 for Ubuntu.Everything was working fine until I installed the ext2fsd driver on Windows. It couldn't read the ext4 partition properly so I played with the options. There I tried changing the ext partition's type from "Linux" to "Linux extend" (which was obviously wrong). After the reboot I get a message when the computer starts up saying "error: partition not found" and in the next line "grub rescue>" with a dash flashing but without any recognizable commands.
I tried reinstalling grub from the Ubuntu 10.10 live cd following these instructions but now I get exactly the same screen, this time saying "error: file not found." instead. What was weird was that gparted in the live Ubuntu couldn't see any partition in the hard drive. It appeared like the whole space was unallocated.When I type 'help' in "grub rescue" it tells me "unknown command". When I type 'ls' it returns: (hd0) (hd0,msdos3) (hd0,msdos2) (hd0,msdos1)I think this might be a clue of what is going on since all the partitions should not be flagged as msdos.
I accidentally formatted a 2TB drive of mine (big oops), but have recovered 2 of the 3 partitions using testdisk. My third partition is a LUKS encrypted partition. Testdisk managed to recover a piece of it, but it won't mount as most of it is unallocated. The partition originally occupied all space from sector 2,930,272,065 to the end of the disk -- sector 3,907,024,064. That is about 473 GBs. Currently, the partition only uses space from sector 2,930,272,065 to 2,930,288,129, about 7.84 MB.
The rest of the space is unallocated. Now what I need to do, is to expand the partition so that it occupies all the space that it used to. How would I do this? I cannot resize the partition, cause it would try to recreate the filesystem AFAIK and I don't want that, as it will fry my data. My data is not terribly important, but I would rather have it then not. I attached a screenie of kpartitionmanager. The partition in question is /dev/sdb2.
I was using windows 7 and I decided to install BackTrack 4 as an operation system so that I can have 2 operation system on my machine, during the installation, I accidentally formatted the windows 7 and right now, I am using only the BackTrack 4, now, I want to re-install back the windows 7 as an operation system but whenever I inserted my CD, it display this words under the Default: >/ubnkern initrd=/ubninit
It needed a command from me in other to proceed but am new in Ubuntu and I dont know what I should type or the command I should used in other to finish installing the windows 7.
I just installed suse 11.3 on formatted partitions (5GB swap, 30GB / and 500GB /home). Just after the installation, My computer showed 25.2GB of /home to be used. When I do:
Code:
dyn-0a2a1f40:/ # df -h .....
That seem to be roughly correct because since yesterday I've been running a program that constantly writes logs and other data files and plots, which might have accumulated a few GB's. It is also collaborated by the output of
Code:
dyn-0a2a1f40:/ # du -sk /home
10548452 /home
I'm not hard-up on space right now but storage has been dear until the recent past. Also out of curiosity, the size of the /home partition is shown as 493 instead of the 500GB allocated while the swap also lists only 4GB instead of 5GB. Below is the output for fdisk -l in case anyone needs it:
Code:
dyn-0a2a1f40:/ # fdisk -l
Disk /dev/sda: 1000.2 GB, 1000204886016 bytes
255 heads, 63 sectors/track, 121601 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x219b052d .....
I have Linux 2.6.34-12-desktop x86_64 and KDE 4.4.5 (which I had previously used in 11.2 without any problems) and 4.0GB RAM.
I have 250 GB HDD, 150 GB has CentOS installed,I have formatted the rest 100 GB in vfat, mounted on /data/ folder, now the issue is only root have the write permission on that folder, i have tried all the commands, however i have reformatted it with ext3 and now issue is resolved, i just want to know that why it is not possible to set the permissin to everyone +w on vfat partition.
View 1 Replies View RelatedI have Vista Home edtion and Linux, I have formatted Linux partions and now that Grub is not letting me boot into Windows..I had C:wIndows D:New Volume and rest of the space was E:
View 5 Replies View RelatedI created primary partition for Ubuntu. And for some reason that partition starts showing up in Windows XP as RAW. The partition should NOT be visible. In explorer. I tried with Ext4, Ext2 same thing, ext partitions should not be visible in windows.
View 9 Replies View RelatedI've used ext2ifs drivers to mount my ext3 partition in winxp, but I don't have write acces, it's mounted in a read-only mode, and i didn't check the rad-only box during the installation of the drivers. [URL] It's a straithfoward proces so I dont understand what I did wrong. I'm using fresh xp install with (more or less) all the updates and ubuntu 10.04 Also the partition is mounted at /home, so I dont know if that makes any difference.
View 1 Replies View Relatedbecause what i was looking for was complicated, i am going to edit post
I have laptop with ubuntu on it. I have one ext3 partition with ~220GB.
I want to delete ubuntu and create two ntfs partitions (50+170GB) so i can install windows 7 later.
how to do that using GParted Live CD?
after several fresh format ext3/ext4/ntfs of the 200GB usb Hard, and even using gparted to delete the partition tables, and
Code:
dd if=/dev/zero of=/dev/sdc
creating a new ext3/ext4 partition leave 3 to 9 GB of used disk space. but ntfs leaves only
[code]....
I am currently using ubuntu 10.04,I want to access ext3 or any partition supported on linux in windows 7. Is there any way,i want to use partition as any other drive in windows.
View 5 Replies View RelatedI have a very strange issue. I have a desktop Ubuntu 10.04 system that has worked just fine for months. Now suddenly grub won't find the root partition which is an ext3 partition (/dev/sda2).The strange thing about this -- I can boot with the install CD and can mount it just fine when using mount -t ext3. If I don't supply the "ext3" type however it identifies the type as "silicon_medley_raid_member" and can't mount it. If I go into the Ubuntu 10.04 Admin>Disk Utilty -- it too identifies the type of the partition as "silicon_medley_raid_member" not ext3. Same with blkid -p. With that I get:
/dev/sda2: VERSION="42758.8269" TYPE="silicon_medley_raid_member" USAGE="raid"I have other ext3 partitions that are recognized OK. When I mount the strange partition forcing ext3 -- it too seems ok. I ran fsck.ext3 on it -- with -f - and no errors were found. I backed up the partition with tar -- again -- no errors archiving. I've even tried zeroing the first 1024 bytes of the partition -- that had no effect on this issue.So what is going on with this. Any ideas? Any ideas how to fix this issue? What am I missing?
I wanted to upgrade from Intrepid to Jaunty. I opted for a format/reinstall as I figured upgrading usually sucks. To save my important data, I resized my partition (partition A), formatted the empty space with ext3 (now partition B), and moved the necessary files from partition A to partition B. Then I went through the install process and installed Jaunty on partition A, telling the installer to NOT format partition B. It gave a warning about the installer deleting system folders (var, usr, etc) but I figured it didn't apply. I was wrong.
So now partition B is "empty." I know it didn't format it, but I need to get those files off of there. I have created an image of partition B using ddrescue, but I don't know where to go from there. I tried using foremost, but it won't recover things like my virtual machines and completely nukes the original file structure I had. And I've tried mounting it (using sudo mount -t ext3 -o loop /home/user/recovery.img /mnt), but that doesn't seem to work. The mount command completes successfully, but nothing shows up in the folder I mounted it to.
I have windows 7 and fedora 12 installed into my laptop.I just want to access linux ext3 partition in windows 7 as we can access windows ntfs as well as fat partition in linux
View 9 Replies View RelatedI just made a new storage partition and formatted it as Ext3. Now, this particular partition is shown and can be read at the terminal "fdisk -l". However, unlike in my Mint 7 partition, it does not show in my Fedora 10.
Code: [jun@localhost ~]$ sudo fdisk -l
[sudo] password for jun:
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0xc5e3f820
[Code]....
This partition can also shows be seen in gparted in Fedora. However, even in the "Places" tab, it does not show.