I'd like to add an HDMI capture board to watch HD TV on VLC/Ubuntu, using an IPTV set-top-box. There are not many choices, and I don't want to purchase an half-baked Windows-only capture board.
View 3 RepliesI was extraction some file through command line then I encounter on notification from winrar. This file exist what u want to do
replace
never
quite
I don't want that winrar will prompt me to choose action. Everytime whenever this situation occur it will overwrite / skip that file
Syntax I am using for unrar
rar e -pmypassword filename
What is the best analogue capture program please to capture Austar.
View 1 Replies View RelatedI'm trying to get my Sound working with HDMI-connection. Got an Nividia 8600M GT on Ubuntu 9.10. Here is what aplay -l says:
[Code]....
Here is the output of alsa-info.sh:
[url]
HDMI video out is fine, HDMI audio is a no go.
I realise this is an issue that has been covered a lot, one way or another, but at least from what I've been able to find, most of the discussion centres around getting HDMI audio to work. However, I have problems even getting the video to work from my laptop's HDMI output.
I have an HP dv6z-se, with an ATI Mobility Radeon HD 6550 (1 Gb) video card and using F14/KDE. My problem is that when I go to System Settings/Display/Monitor, Fedora doesn't actually seem to realise my computer even has an HDMI output and only displays options for VGA and my integrated screen.
When I plug it into my LCD screen, sometimes I get a 'No Signal' message and sometimes I get garbled static and a message about unrecognised input and the frequency it's coming at.
I read elsewhere in the forum that someone was able to get video working by editing their xorg.conf file, so I went in and tried to see if I could replicate that, but none of the files in my xorg.conf.d folder had anything related to video outputs (as far as I can tell at this point).
i want to connect my laptop to the lcd using hdmiI have nvidia video card 9200 gs and the driver is installedafter connecting both together nothing happens!do i have to change anything in the system or display settings?
View 8 Replies View RelatedSo I just got a MSI 870A-G54 and have been trying to get the CPU temperature on the command line. I ran the following
Code:
sudo apt-get install lm-sensors hddtemp sensors-applet computertemp
And ran sensors-detect
Code:
sudo sensors-detect
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: MSI MS-7599
# Board: MSI 870A-G54 (MS-7599)
[Code].....
is there a reason why OpenSUSE won't come with SUN Java prepakaged? Preinstalled Java seems to be ice something, which doesn't work with most of the Java software. Is there an easy way to replace it with real Java and have all the settings ready made. With this I refer to environment.
My current project is to make IDE for the BV513 PIC-board.
My keyboard (usb) keep on stopping working after about 30-60 sec Then I have to removed the cable and re-install it then it works again.
View 1 Replies View RelatedI am having DM6446 board. I am trying to connect internet via this board. In this I am having some issues regarding this. Normally in terminal when I ping to particular site, I will use the following command
>> ping google.com
I will get proper response with the packets details. When I am trying the same thing in minicom terminal I am not getting anything even the proper error messages. If I use the same ping command in different way
>> ping 209.85.231.10(ip of google.com)
I am getting proper response. I don't know why the DNS name is not resolving in the board. Is there any documentation is available to do the internet connectivity with this board?
How do I delete one of my posts?
View 6 Replies View Relatedtrying to get hauppauge 1250 working with Linux Dont think its compatible yet with Linux
Just bought 1 month ago
linuxtv.org
followed instructions for driver install
but no /dev/video /dvb
and still get dmesg
Board is not recognized by driver
I have RHEL3 installed on my machine, It is having lot of data and 2 databases oracle and mysql are running on it. Now my cpu is having problem and it is going to be replaced by the new one. Hard disk is fine.
Whether the new CPU will be able to boot with the old hard disk. If not is there any way so that i can recover everything with the old hard disk. SO that i need not have to install any packages and configuration seetings after the replacement.
I am running Virtual Box Ubuntu Linux 2.6. Connected to my PC is an embedded board running debian 2.6.32. I have ip forwarding on at my virtual box. From my embedded board I can successfully ping www.google.com. I want to download and install some packages but when I try apt-get I get the following: I've flailed away at this for most of the day
[Code]...
when I connect the LAN cable in mother board it is not working but when I connected an external LAN card it was working fine . Is there any solution where I can use the on board LAN
View 2 Replies View RelatedI am working on a project to build an embedded board with WIFI connectivity. My present status:
- I have a embedded development board TS7200 .
- It has USB and Ethernet Port.
- I am able to get port Linux on it and run program to communicate between devices and a computer using socket programming and Ethernet.
I need help in deciding how to get WIFI connectivity to the board. I guess it would mostly be using WIFI dongle? Any suggestion for a WIFI dongle?How should I get it working? Where should I look for proper reading material? I am am planning to do some basic program practice using WIFI on my laptop. How can I do that ?
i installed linux OS on my lpc3131 board with kernel 2.6.20. I want to install gcc to my board in order to compile codes without cross compiler or auxilary PCs. But i think it must be different then installing gcc rpm on Fedora PC or untar and make gcc, I dont know what i must do. what release or version of gcc should i download and what kind of changes must i do in Makefile.
View 5 Replies View RelatedI have a server running ESXi. I want to know if it supports AMD-V for hardware-based virtualization. Is there any way to check it from one of the guest os running (centos 5).
Also, I tried rebooting the box and I can't see an option in the bios to turn on/off Virtualization. Although from Asus site they say it supports is:
[URL]
The motherboard is an ASUS KFN4-DRE and has 2 Dual Opteron 2216 2.4GHz processors.
Also, on a side note, I have another box with HDAMA board and 2 Dual Opteron 275s. Do these support AMD-V as well? No option in bios as well.
I want to add GSM module to my board EM2440 How i can connect the module with Linux kernel 2.6.30 ? Are i will use gsmd or another ? and how add it with the kernel ? What about its GUI ?
View 1 Replies View RelatedI tried install Debian 5.04 on Alix 3d2 board (no VGA) but after boot i see only one line (Probbing EDD (edd=off to disable)... ok) and everythig stops. I'm doing this from this instrucion [URL] I'm looking working solution (Under Win or Linux) to install Stable Debian on Alix3d2 and 2d2 via network (PXE). I have microdrive drives for this boards
View 1 Replies View RelatedHere's the situation: My Dell Latitude D830 video chip failed. Dell has replaced the system board under warranty. The following problems now exist:
1. eth0 has become eth1. The system failed to see the current ethernet as the only ethernet.
2. wlan0 has become wlan1. The same has occurred.
3. The pulse audio applet (I know, not officially supported) will not start up properly at boot complaining about something missing or wrong in the configuration. I suspect the hardware for sound is also not recognized as the previous.
4. Pidgin and Firefox are both having issues with anything SSL and digital certificates. In pidgin, I can no longer log into AIM. With Firefox, I had to accept a bunch of new SSL certificates. (Did that once for any https web site I have accessed for the first time since the system board change)
I would seriously like to understand how the hardware detection situation affects all of this. I was able to tweak some configuration files to get eth0 back to normal operation by manually changing the MAC address. But that isn't working for wlan0/wlan1 as I attempted to make corrections using the GUI and that didn't work out too well.
Where would I find the central point of identifying hardware devices and device names? And I suspect the encryption cert issues are related to the change in hardware as well which makes me wonder a few things. What happens when a non-laptop user changes a network card? Is Fedora married too closely to the hardware? What happens if we were to try to "ghost" a Fedora installation?
I already had windows on my box, trying to install suze linux 10.1, but while I boot from CD, my first option is Boot from Hard disk and second is Installation. But for selecting installation option I am not able to access keyboard.
View 5 Replies View RelatedWill i be able to boot openSUSE and other OS on same disk after replacing main board. i wish to set raid 5 but lack additional sata ports on main board. The boards have same pci, audio and graphic hardware.
View 2 Replies View RelatedI'm searching for the cheapest single board computer which can run Linux. It must have ethernet and at least one serial port.I'm currently looking at these modules from Technologic Systems, but wondering if there's anything cheaper out there?
[URL]
I have recently built a HTPC with a GA-G41m Combo and it has worked well with Ubuntu 10.04, however last week some time the on board network stopped working. I have tried different routers and different cables, but the network light wont come on. What Can I doo?
View 5 Replies View RelatedI just got an LG widescreen monitor, but i just cant set it to use a widescreen definition. It still has my old CRT monitor as the default and it does not recognize the new one Im using the nvidia card and its own settings driver.
View 9 Replies View RelatedI have found two ways to get the main board product name: [sudo lshw][sudo dmidecode] Is it the nature of this info that's making it protected or is it the source code of these tools?Is there any way to get main board product name without sudo? Shall I dig inside the source code of these tools?
View 2 Replies View RelatedI changed my keyboard language. Then restarted without changing it back to English. My user name and password is in English. I'm using a custom GDM theme. Now when i switch on my system my login screen keyboard language is not English. what can i do? Is there any way to change it back?
View 2 Replies View RelatedI have a XScale PCIe RS-232 board running in a home built quad core w/ 8GB ram that I want to use to either communicate with a UPS or a RS-232 embedded device. The relevant sections of the output of dmasg are;
dmesg |grep ttyS
serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
00:07: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
[code]...