I am having DM6446 board. I am trying to connect internet via this board. In this I am having some issues regarding this. Normally in terminal when I ping to particular site, I will use the following command
>> ping google.com
I will get proper response with the packets details. When I am trying the same thing in minicom terminal I am not getting anything even the proper error messages. If I use the same ping command in different way
>> ping 209.85.231.10(ip of google.com)
I am getting proper response. I don't know why the DNS name is not resolving in the board. Is there any documentation is available to do the internet connectivity with this board?
i actually registered here because i'm done with my knowledge of linux, errors which cause my sys to hang and/or reboot randomly after some time. They occur while the system is under heavy cpu, heavy mem-read-write, mediocre mem fill, heavy hdd io (for ~20 seconds every ~5 minutes).
problem background we ordered two identical PCs (specs below), one of them brought those sata errors quoted below from /var/log/messages, the other one runs flawlessly. Same Hardware and Software Configuration. Faulty one brought reallocated sectors right at start, mass seek errors, read errors. 1st try: swap cables, change bios mode ata_piix <-> AHCI. Didn't work. Went away for repair. Stupid Techie did only swap hdd, so problems occured again. Shipping for repair again. Board AND hdd exchanged. no more seek/read errors, no more reallocated sectors. But similar sata problems right after 3 days of previously described workload. Following logs are from after the last repair.
I installed RHEL 5 on my desktop a few days back. I want to enjoy movies in my new OS. Some one told me to install mplyer caz it plays any file. So I decided to install it. I issued the following command:
[Code]...
As you can see yum is not resolving the dependencies.
I have just installed Fedora 15 and while I can ping websites from the CLI I cannot access sites via my browser, I have installed it on my laptop and it is not presently connected to a network, just a single device connecting wirelessly via a home broadband line to the internet,
What entries should be made in my hosts.conf file, I have entered
Do I need to make entries in the nsswitch.conf file, At the moment it reads,
I have also checked the permissions on these 3 files and all users and groups have read permissions.
I have debian lenny amd64 with two network cards. I have had one and when problem started to occur I tried installing second, but problem still appear.
Quote:
Quote:
I have tried dnsmasq to solve problem but I failed, and that is reason why 127.0.0.1 is there.
With first dns:
Quote:
Same is first time with dnsmasq, but then it gets cached.
My local network works perfectly, and I am writing this with remote desktop from some other computer.
I am using Fedora 7 in my server. Currently windows server 2003 (Active Directory integrated with DNS) is running. I want to switch my DNS to Linux. In my small organization there are only 20 users using static IP address and the IP are mostly permanent. so should deploy name server or I just populate eateries in /etc/hosts file ?
EDIT: The problem is more basic than dnsmasq. On testing to see if the nameservers are reachableCode:root@ps1:~# ping 218.248.255.146connect: Network is unreachablePost title pre-pended with [DO NOT REPLY] dnsmasq on a recent Slackware 13.0 install is not resolving. Usually dnsmasq "just works". I have tried all the problem analysis techniques I know and am stumped.
First the symptoms: Code: root@ps1:~# vi /etc/dnsmasq.conf
I have also used external DNS servers just to eliminate there being a problem with 192.168.1.67 (which many other computers are using successfully).
When I attempt to ping Google just to see if it works I receive this:
Code:
If I issue a host command against google.com I receive this:
Code:
I had thought that host and the name lookup routine would use the same DNS server and it should fail on the host command as well as the ping, but evidently not.
I installed fedora core 10 on my pc & now i have been trying to install samba. I dont have a network so i mount and use my dvd for installation. I lack exotic package management tools like apt or yum yet the system-config-packages tool does not make sense either. so am stuck with the rpm -ivh [package] command.
The issue however is that this command returns querries about missing dependencies when I attempt to install. So is there a way (switch) i can add to tell the rpm command to automatically check and solve these dependecies using the Packages folder on my mounted dvd? - because i believe all these dependencies are on the dvd.
I set a variable before entering the FTP session (vDate). Then it does not seem to resolve when I try to use it in the session as part of an mput command. $vDate resolves as an empty value. Can you point me in the right direction?
I have a version of slackware installed as a virtual machine and am not able to ping hosts or otherwise receive data from any IP addresses external to the LAN. I think this problem is due to the hostname of the vm not being recognized by the gateway (ddwrt); the vm receives an IP via dhcp but the gateway does not seem to recognize its hostname (registers as *).
Will readily respond with whatever conf file is needed.
I have some strange problem with dns resolving. I am working on computer and suddenly, out of nowhere dns resolving stops to work on my machine. Sometimes networking restart solves problem, sometimes not. It happens randomly two-three times in a week, and at random time. Network in virtual machine on same computer works perfectly even if dns resolving stops on host.
I have tried everything but I can't find what causes it. How can I troubleshoot to find out what causes problem? Ten minutes ago it happened again and I have solved problem with networking restart.
My ip address is not resolving to the domain name. I have checked etc/host reboot and all but it's not working. I can't seem to find where to post my issue then I found you and you are on line
I have installed Bind DNS server in Opensuse 11.1 and it was running fine for two weeks. However starting last week it was unable to resolve a lot of internet sites (e.g. opensuse.org). I can say it is working partiallyI tried restart the named service and it worked fine for only about 15 minutes and back to partial condition.All the records in zone files can be resolved. Only some internet websites not able to resolve. The same sites can be resolve with another dns server internally
I have a strange problem with wireless internet connection. We have 3 computers, 2 of them with Win 7 and 1 with Ubuntu 9.10 + Win XP.
Now if all three computers are connected to the internet through wireless router, the computer with Ubuntu 9.10 frequently fails to resolves hosts using various web browsers. I have to disconnect and reconnect to the router to get internet back but it only works for a maximum of 1 minute before it fails again. If the 2 computers with Win 7 logs out from wireless connection then the Ubuntu 9.10 machine works just fine for long periods.
If i boot with Win XP internet works perfect even when the other computers are connected but i really want to use Ubuntu 9.10. The wireless chip is an Atheros 9285.
I'm on 11.04 on VMware 4.1, trying to get name resolution working. I can ping by IP other systems including on the internet. The network manager Icon on top shows a wireless icon, but the 'Wired Network' is grayed out and below that says 'device not managed'. What can I do to fix this? The interfaces file has the auto lo, then below that iface eth0 inet static stuff... It doesn't work with or without the auto eth0 entries.
I have the nic set to DHCP and on my dhcp server gave it the mac address of the box to assign it an address, that is working.
I have been casually using Unix for about 20 years, but I've never really done anything beyond basic user things unless I had instructions/help.
I've set up an Ubuntu 10.04 system and it works great except for one thing. It doesn't resolve local names.
I can ping or access other systems by IP Address and I can resolve internet names with no problems, but it won't recognize any of the other systems on my home network.
The system is set up for dhcp and everything is defaulted from the installation. There is no DNS suffix or domain set up on my router.
So I am trying to do a Ruby on Rails install on a Debian OS. It is proving most difficult. There isn't much help from Google since RubyGems is supposed to resolve dependencies for you, so you can just type "gem install rails" and it will install everything you need. But as it turns out, RubyGems doesn't want do. It keeps getting stuck on either the "rack" or "rake" dependencies saying it needs to either be installed or updated when it is there and has a new enough of a version. I even tried this as root and it didn't work.
At work we run DHCP. hostnames have the format: computername.city.mycompany.com
I have a laptop runing Fedora 13 and a desktop I use for backups, etc. My laptop is named copernicus. Desktop is named galileo. If ping either hostname from itself I get back the localhost IP address. If I ping the fully resolved hostname it tells me unknown host. The desktop is exporting an NFS share I use for backing up work data. I need the laptop to be able to resolve host names to mount the share since we use DHCP. The desktop is dual boot and if it is booted into windows my laptop can resolve the hostname properly. What do I need to do in Fedora to get it to register a hostname with the DNS and/or DHCP server? Should the domain and the search path below both say the same thing?
Here is resolv.conf on the laptop (I am at home). The desktop looks the same, except for a different nameserver. Both computers can resolve other hostnames, just not each other.
I have a samba mount in Windows, mounted from a local Linux devbox. The projects on this mount contain a lot of symlinked directories. They all work fine and look like normal directories to Windows. What I'd like to do is figure out for a given file what its real UNIX path is.The context is: in my editor I have a script that runs the Perforce open command, to which I pass the file location.p4.exe edit FILE_LOCATION
However, perforce will not understand this FILE_LOCATION, if on the Linux side part of the path is a symlink. It needs to know the real path.What I need is something along the lines of the Linux readlink command, which resolves symlinks in paths.
whether iptables logs can be set to automatically resolve IP addresses? I am running the firewall on a network with DDNS/DHCP, and this ability would really help quickly identify hosts with suspect traffic.Failing this, I guess the simplest solution will be to simply set static addresses!
I have a ubuntu server running which acts as a firewall/dhcp router for sharing internet to all computers on the network. On the network i have my stationary computer (win7) and my laptop (macbook).The server has 3 nics installed.ETH2 for internet. ETH1 (192.168.1.2) for windows pc. ETH0 for macbook (192.168.2.2).I can share files no problems over the network. Between windows <-> server, macbook <-> server, windows <-> macbook.The problem i'm experiencing is that i can't seem to find either hostnames between windows and macbook. They connect to each other fine with the right ip addresses, but they can't seem to connect when using computer names.
On both the macbook and windows pc i can see the server and connect to it without using the ip adress.What can i do to make them see each other with their computer names? Is there anything i can install on the server and configure in order for it to work automatically?In osx you have a tab in the finder that says "shared" which shows the computers on the network and only my server pops up.The same in windows, i can only see the server but not the macbook.As said, it works perfectly fine if i use \192.168.2.2 (or smb://192.168.1.2 on the macbook) but i'd rather be able to connect via the computer names.Would also love if they could resolve automatically so when a friend connects to the network i'll see his computer name right from the start, without any re-configuration.
I have a simple script that I am writing to parse an XML file for me, and update some version numbers. Basically what happens in my script is that I'm running a grep command on the file to get the current version number, then I prompt for a new number, and then I want to globally replace that version number in the file. The problem is, the sed command seems to only want literal values (it doesn't appear to be capable of resolving variables). For example, this code doesn't work:
[Code]...
I have tried removing the curly brackets from the variable names, quoting them, etc. and nothing seems to work. Should I do this with awk instead (and if so can you kindly write out the command for me because I never bothered to learn awk).
I just set up my first ever bind9 DNS server running on ubuntu server 10.04. This server is also my gateway/dhcp server.
Here is what is weird: If I do a dig @8.8.8.8 dschuett-lmtl.scs.local from any of my clients it resolves?!?! Dig shows that it got the answer from MY Bind9 DNS server (and NOT Google's of course), but why is it still resolving when I'm telling it to use and external DNS server?
The other weird thing is that the SAME EXACT dig command above does NOT resolve internal host names if I do it from the Bind9 DNS server. - Which is what i would expect SHOULD be happening if done from the client machines...
I had configured Squid in RHEL 5 and facing an issue with pinging. Not able to ping any website,hostname is resolving to ip address but not able to ping
