I want to add GSM module to my board EM2440 How i can connect the module with Linux kernel 2.6.30 ? Are i will use gsmd or another ? and how add it with the kernel ? What about its GUI ?
View 1 RepliesHow i can connect GSM module with board EM2440-iii? I have linux kernel 2.6 on the board.I read that it work by AT command but i need more details .
View 2 Replies View RelatedI want to get file system for board Em2440 III (has s3c2440 processor), has this specification 1- has driver of GSM module ( Telit GE865). 2- its size less than 64MB.
View 4 Replies View RelatedI am trying to install a Sunix 4018T dual parallel port card on a pc with Mandriva Linux 2010.1: Dealer told me that linux has driver for this card already so I inserted it and turned on my pc. Unfortunately when I try to install my Okidata ML320, cups it's not showing any parallel ports. I try to update all the system with last patches and packages :I tested the card on a pc with windows xp, installed my printer and it works perfectly.
View 3 Replies View RelatedWhen I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:
[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists
[code]...
Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.
Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.
I'm trying to enable the rewrite module in apache, to enabled the module I followed the last entry in the fist page this thread:[URL]...When I restart the apache all works fine, so I supose it's enabled
Now I create .htaccess in my apache folder (/home/user/apache), and I write this:
Code:
RewriteEngine On
RewriteRule ^link([^/]*).html$ test.php?link=$1 [L]
And I try to execute this: ./.htaccess, I have this mistakes:
Code:
./.htaccess: 1: RewriteEngine: not found
./.htaccess: 2: Syntax error: "(" unexpected
What are I doing wrong?
Code:
nits@nits-desktop:/mnt/Storage/Tors/Incomp$ btdownloadcurses --check_hashes 1 filename.torrent
/usr/lib/python2.6/dist-packages/BitTorrent/Storage.py:4: DeprecationWarning: the sha module is deprecated; use the hashlib module instead from sha import sha
These errors occurred during execution:
[09:37:48] IOError - [Errno 5] Input/output error
Got this error when I tried hash checking, was downloading the file using rtorrent when there was a sudden powercut and my system shutdown abruptly, tried restarting the torrent and kept encountering problems while restarting.
I want to add some code in existing linux2.6.33.2 to enhance kernelI want to know how to start and where to add code.
View 2 Replies View RelatedI need to install module u32 into the netfilter module for kernel 2.6.27.
I did not see the source code in the kernel version I have. where can I find the code for U32 module.
I have checked "netfilter.org" and looks like POM is discontinued. Is the u32 module committed to kernel version 2.6.27 or need to patch it. If yes, where can I find the patch?
I building the kernel for a MIPS processor.
OK Trying a fresh install of bnome openSuse, and I have certainly screwwed something up again and hope I don't have to reinstall again., arghhhh! Tomboy won't open, even after reinstallation, and below is the error, but first, as well I can't open my .odt file with openoffice writer!
now the error... #tomboy Gtk-Message: Failed to load module "canberra-gtk-module": libcanberra-gtk-module.so: cannot open shared object file: No such file or directory Gtk-Message: Failed to load module "gnomebreakpad": libgnomebreakpad.so: cannot open shared object file: No such file or directory ...and lots more
I am interested in using fortran and an external library called matio used to save arrays to matlab .mat files. I have installed the matio and matio-dev packages from synaptics but i cannot compile a code receiving an error Code: christos@christos-laptop:~/Desktop$ gfortran -o test test.f90 -lmatio -lz test.f90:2.13: USE MATIO 1
Fatal Error: Can't open module file 'matio.mod' for reading at (1): No such file or directory How can i load a module in order to use it in fortran through the GCC compiler?
i installed firefox 4 and removed the old 3.X version. did a general update that my computer showed me was available then i noticed the first problem. firefox 4 would not launch when i clicked it, it would only launch when i clicked the gnome 3 applications button and then clicked and dragged the firefox logo to the desktop, then it opened. the second problem i am now having which at the moment is more bothersome is that after i closed the lid to my laptop and opened it up again after a while and logged back in and noticed that the ENTIRE gnome 3 environment was gone. no panel no menu nothing just the desktop and a few desktop icons. i tried the command "yum install gnome-shell" but it just sed that gnome 2.31.5-7 .fc14.i686 was already installed so it wasnt gonna do anything, then i tried the "gnome-shell --replace" command and it just said
failed to load "canberra-gtk-module": libcanberra-gtk-module no such file or directory.
I've installed openSuse 11.4 server-mode (text only) on my desktop, and I'm trying to configure IceWM so i'll eventually have it set up so it always boots into text only mode, but I could be able to quickly start icewm via the command line.using Yast, I installed the Xorg server, and icewm.when I type X, the screen goes black and it just doesn't seem to do anythingI found if I hit ctrl+alt+f1 it kinda puts me back into text only mode, but I can't put in commands anymore. The last thing it says on the screen is:
Failed to load module "fglrx" (module does not exist, 0)
I've goggled that error message and the discussions that popped up around it made no sense to me at all. I've never configured X from scratch before, can someone point me towards a tutorial or something?
I cannot find the Xorg configuration file on my newly installed Debian on my tablet-pc, so I followed this tutorial [URL] and ran the command "Xorg -configure", to which I got the following error messages:
(EE) Failed to load module "vmwgfx" (module does not exist, 0)
(EE) vmware: Please ignore the above warnings about not being able to load module/driver vmwgfx
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
[code]...
When opening gedit as a user I get the following message
Gkt-message: Failed to load module "'pk-gtk-module"
If I try to open gedit as root I get the same message but with other messages. These are shown in the attached file. gtk.txt
This is on an upgraded machine using the preupgrade method. The same has happened on two machines upgraded from F14 to F15 the same way. 64 bit systems.
How to clean this up so the messages do no appear?
I am using Redhat linux 5 version 2.6.18-164.e15 with platform i686. I need to add ntfs module. I execute following command
#modprobe ntfs
but it say FATAL: Module ntfs is not found.
So I just got a MSI 870A-G54 and have been trying to get the CPU temperature on the command line. I ran the following
Code:
sudo apt-get install lm-sensors hddtemp sensors-applet computertemp
And ran sensors-detect
Code:
sudo sensors-detect
# sensors-detect revision 5818 (2010-01-18 17:22:07 +0100)
# System: MSI MS-7599
# Board: MSI 870A-G54 (MS-7599)
[Code].....
is there a reason why OpenSUSE won't come with SUN Java prepakaged? Preinstalled Java seems to be ice something, which doesn't work with most of the Java software. Is there an easy way to replace it with real Java and have all the settings ready made. With this I refer to environment.
My current project is to make IDE for the BV513 PIC-board.
My keyboard (usb) keep on stopping working after about 30-60 sec Then I have to removed the cable and re-install it then it works again.
View 1 Replies View RelatedI am having DM6446 board. I am trying to connect internet via this board. In this I am having some issues regarding this. Normally in terminal when I ping to particular site, I will use the following command
>> ping google.com
I will get proper response with the packets details. When I am trying the same thing in minicom terminal I am not getting anything even the proper error messages. If I use the same ping command in different way
>> ping 209.85.231.10(ip of google.com)
I am getting proper response. I don't know why the DNS name is not resolving in the board. Is there any documentation is available to do the internet connectivity with this board?
How do I delete one of my posts?
View 6 Replies View Relatedtrying to get hauppauge 1250 working with Linux Dont think its compatible yet with Linux
Just bought 1 month ago
linuxtv.org
followed instructions for driver install
but no /dev/video /dvb
and still get dmesg
Board is not recognized by driver
I have RHEL3 installed on my machine, It is having lot of data and 2 databases oracle and mysql are running on it. Now my cpu is having problem and it is going to be replaced by the new one. Hard disk is fine.
Whether the new CPU will be able to boot with the old hard disk. If not is there any way so that i can recover everything with the old hard disk. SO that i need not have to install any packages and configuration seetings after the replacement.
I am running Virtual Box Ubuntu Linux 2.6. Connected to my PC is an embedded board running debian 2.6.32. I have ip forwarding on at my virtual box. From my embedded board I can successfully ping www.google.com. I want to download and install some packages but when I try apt-get I get the following: I've flailed away at this for most of the day
[Code]...
when I connect the LAN cable in mother board it is not working but when I connected an external LAN card it was working fine . Is there any solution where I can use the on board LAN
View 2 Replies View RelatedI am working on a project to build an embedded board with WIFI connectivity. My present status:
- I have a embedded development board TS7200 .
- It has USB and Ethernet Port.
- I am able to get port Linux on it and run program to communicate between devices and a computer using socket programming and Ethernet.
I need help in deciding how to get WIFI connectivity to the board. I guess it would mostly be using WIFI dongle? Any suggestion for a WIFI dongle?How should I get it working? Where should I look for proper reading material? I am am planning to do some basic program practice using WIFI on my laptop. How can I do that ?
i installed linux OS on my lpc3131 board with kernel 2.6.20. I want to install gcc to my board in order to compile codes without cross compiler or auxilary PCs. But i think it must be different then installing gcc rpm on Fedora PC or untar and make gcc, I dont know what i must do. what release or version of gcc should i download and what kind of changes must i do in Makefile.
View 5 Replies View RelatedI have a server running ESXi. I want to know if it supports AMD-V for hardware-based virtualization. Is there any way to check it from one of the guest os running (centos 5).
Also, I tried rebooting the box and I can't see an option in the bios to turn on/off Virtualization. Although from Asus site they say it supports is:
[URL]
The motherboard is an ASUS KFN4-DRE and has 2 Dual Opteron 2216 2.4GHz processors.
Also, on a side note, I have another box with HDAMA board and 2 Dual Opteron 275s. Do these support AMD-V as well? No option in bios as well.
I tried install Debian 5.04 on Alix 3d2 board (no VGA) but after boot i see only one line (Probbing EDD (edd=off to disable)... ok) and everythig stops. I'm doing this from this instrucion [URL] I'm looking working solution (Under Win or Linux) to install Stable Debian on Alix3d2 and 2d2 via network (PXE). I have microdrive drives for this boards
View 1 Replies View RelatedHere's the situation: My Dell Latitude D830 video chip failed. Dell has replaced the system board under warranty. The following problems now exist:
1. eth0 has become eth1. The system failed to see the current ethernet as the only ethernet.
2. wlan0 has become wlan1. The same has occurred.
3. The pulse audio applet (I know, not officially supported) will not start up properly at boot complaining about something missing or wrong in the configuration. I suspect the hardware for sound is also not recognized as the previous.
4. Pidgin and Firefox are both having issues with anything SSL and digital certificates. In pidgin, I can no longer log into AIM. With Firefox, I had to accept a bunch of new SSL certificates. (Did that once for any https web site I have accessed for the first time since the system board change)
I would seriously like to understand how the hardware detection situation affects all of this. I was able to tweak some configuration files to get eth0 back to normal operation by manually changing the MAC address. But that isn't working for wlan0/wlan1 as I attempted to make corrections using the GUI and that didn't work out too well.
Where would I find the central point of identifying hardware devices and device names? And I suspect the encryption cert issues are related to the change in hardware as well which makes me wonder a few things. What happens when a non-laptop user changes a network card? Is Fedora married too closely to the hardware? What happens if we were to try to "ghost" a Fedora installation?