Hardware :: System Hangs After Grub Screen Ubuntu 9.10 32bit
Feb 3, 2010
So I just did a fresh install of 9.10 32bit on my media pc, booted right up the first couple of times however it choose to stop doing so for some reason. When it boots I see the words "Grub Loading" flash on the screen and then it just goes to a black screen with the white flashing line in the upper left hand corner...
the system was running well and I'm not sure what exactly changed... I just went to reboot it and it wouldn't come back online.
Also worth noting is that it is also failing to boot from a LiveCD for me, I get the screen where I select how I want to boot from the disc, I select "try Ubuntu with out any changes to my computer" and then after that it hangs again.
I'm fairly certain the hardware is good as it never had any issues like this on Windows 7 and I can still boot properly from a Windows based disc.
View 7 Replies
ADVERTISEMENT
Jul 20, 2010
I started my laptop this morning with no problems. It was doing a file system check which I quit (pressing C) after about 30%. The only problem I had was wired networking didn't seem to be working (though wireless was). No problem: this happens sometimes and a restart fixes it. After restart: the GRUB screen hangs at "Loading stage 1.5" for ages before issuing Error 25. Try a restart. Same thing. And again. I'm on Lucid 10.4, no other OS installed, Toshiba laptop that up to now has had no problems with the last two versions of Ubuntu.
View 1 Replies
View Related
Jan 25, 2010
I installed fedora 12 to a 4GB flash usb flash drive. When I reboot and select windowsxp, grub displays a blank screen and hangs up.
[root@localhost Terry]# fdisk -l
Disk /dev/sda: 160.0 GB, 160000000000 bytes
255 heads, 63 sectors/track, 19452 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Disk identifier: 0x41ab2316
Device Boot Start End Blocks Id System
[Code]....
View 2 Replies
View Related
Feb 15, 2011
I am trying to install Ubuntu 10.10 x64 on a HP Pavilion p6565uk.
My PC is x64 compatible, although ubuntu will not install.
I don't get to any gui, it says ubuntu will continue install in 5 seconds, at 0, nothing happens. The CPU light is flashing, but nothing happens.
After about 10 minutes, it reboots, but when the HP splash screen shows (Before the boot selection screen) it just hangs. I have to do a hard shutdown to boot back up.
I am using wubi for install.
View 1 Replies
View Related
Feb 6, 2010
I installing Fedora 12. I did ALL the same as in the installation guide, GRUB installed into MBR. And after installation and rebooting - nothing happens, after BIOS messages there is nothing - computer hangs. GRUB seems to be not installedI have 2 hard disks. At first I tried to install on the 2-nd drive(it is slave). Afterward I detach one disk and try with only one hard disk(it is master). Nothing changes - computer hangs.
View 3 Replies
View Related
Dec 11, 2009
What would be the advantage of running a 64bit system over a 32bit system? I only have 3GB of ram but plan on kickin another 1GIG into it. But i wanna try 64bit Linux(probably slackware) on it. But first im just wondering what the advantages are people have seen who have used both 32/64bit linux. Speed? Smoothness? And also what are major disadvantages such as compatibility, configuration, etc.
View 14 Replies
View Related
Jul 18, 2011
Have win 7 on one drive and ubuntu on 2nd drive then son goes and deletes partition that Ubi was in ,now cannot access any system all i get is grub rescue on screen and i cannot boot with any thing taking a guess the grub bootloader has died and made a mess of the windows bootloader.
View 3 Replies
View Related
May 8, 2011
I am running ubuntu 10.4, windows 7, and I had ubuntu 10.10 on a single hard drive. I upgrade the 10.10 system to 11.4 and now my grub menu which is on the 10.4 system shows two windows and two 11.4 installations.
How can I clean this up? Also I have tried to start with the grub 1.99 on the 11.4 system and all I get is a black screen at startup. I am happy with grub on 10.4 except for the extra lines.
[Code]...
View 9 Replies
View Related
Mar 21, 2011
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot
View 19 Replies
View Related
May 30, 2010
10.04 32bit Desktop edition. I have unchecked the "Enable screensaver when the computer is idle" option and have set "put display to sleep when inactive for" to "Never" but the display is still blanking out!
View 7 Replies
View Related
Nov 2, 2010
I installed Win7 after Ubuntu (10.10). I attempted to reload grub so that I would be able to run them dual boot and now I can't load anything.
I followed the guide here: [url] and went threw it a couple of times now to make sure it wasn't user error.
I am using a live cd from 10.04 because it's the only one I have. Any chance that's why it isn't working properly? I wouldn't think so, but I assume that it's possible.
If that is the case; Any way to solve it without using the live cd? I cannot burn a new disk because I have to boot from disk to use my computer right now.
I just get a flashing cursor on a blank screen when I try to load.
View 9 Replies
View Related
Mar 28, 2011
I installed CentOS 5.5 last night using the DVD ISO (from a USB drive thanks to the Universal USB Installer). I selected the Server and Virtualization packages, and finished the install all the way through. At the end, the installer asked me to remove any installation media and reboot the system. After rebooting, the system hangs on a blank screen with a blinking cursor in the top left corner that does not accept text. This is before the GRUB screen appears. For partitioning, I created a 4GB swap partition on sdb and a 16GB ext3 partition on sda, mounted at /, with the remaining free space on sdb mounted at /storage.
Does anyone know why this system is hanging before the GRUB menu?
View 4 Replies
View Related
Feb 16, 2010
i can only get 64bit from amazon's site. I tried running windows version in wine but it failed to work.edit: due to a mislabeled CD, I had errantly installed the 64bit version of Ubuntu and had not known until I was told later in this thread.
View 9 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Oct 7, 2010
My printer wont work on 64bit ubuntu, no drivers. Just for 32bit so I don't know all the technical stuff to get it to work if there was a way to, but anyways. I tried to run ubuntu 32bit and I have a lot of boot problems. Sometimes it will boot but most of the time it wont. I have to hard reboot every time 6 or 7 times just to get it to boot. I was wondering what could be the problem. For some reason I was thinking maybe it was my hard drive being to large (1.5 terabyte) its been a while since I've tried but I don't remember there being any error messages just a black screen. I've waited up to around 5 hours for one boot so I know I am giving it enough time. Is there a fix to make 32bit ubuntu use a large hard drive like that. I know there is one for the ram but I love ubuntu and would like to have a stable system and use my printer at the same time.
View 5 Replies
View Related
Jun 1, 2010
After succesfully installing Ubuntu 10.4 x32 and rebooting pc hangs on black screen with a flashing white dot in the top left corner of my screen, i've tried installing it twice with the same results.
my setup is: Asus p5q-e,
4 gig of corsair dual ram,
ati 4850 graphics,
onboard audio.
ahci mode
win 7 installed on intel ssd, and xp on a samsung 320 gb sata 2,
i had this configuration running fine for 2 months without boot loaders,
on pc start up i choose from which hdd to boot from.
i installed ubuntu on the samsung drive where it was recognised fine, wiped it all and installed automatically.
pls let me know if there is anything i missed, and advice if possible in what to do.
thanks
kannanni
View 2 Replies
View Related
Feb 5, 2011
I am thinking about upgrading to 64bit Ubuntu 10.10 because I have heard it's good for gaming and makes things run smoother. Also, I know it's the new thing and I'm going to have to switch eventually. Point is I don't want to loose my data with the clean install and I was wondering if I backup my current system, which is 32bit (assuming there is a backup utility, I thought I saw one) will I be able to load that on my new 64bit install?
View 8 Replies
View Related
Jun 7, 2009
Can any one please explain me what is 32 bit Operating system and 64 bit operating system?
View 2 Replies
View Related
May 3, 2010
I am having problems getting xrandr to work on my Thinkpad Z60m.I've tried different xorg configurations, but xrandr does not activate
dual screen mode to where I would have one large desktop. My clean xorg.conf after running xorgsetup is the following:
[code]...
View 10 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Nov 25, 2009
I am trying to kick start learning programming for Android.I try to install Android SDK(1.5, 1.6, and 2.0). However, the emulator keeps crashing with "Segmentation Fault" error. Since Android emulator is a binary only 32 bit executable, I suspect that I am missing some 32 bit library, so I tried to install qemu.However, since my installation is 64 bit, I can only install 64 bit qemu. how to enable 32bit repository on a 64 bit system? I don't know if I should use i586 or i686.
View 2 Replies
View Related
Dec 27, 2010
I am trying to get PHP 5.3.4 into my webserver, running Slack 13.1 on a 32bit system. Basically, it's a success, but no matter what options I try, phar will not be installed
Code:
Generating phar.php
Generating phar.phar
PEAR package PHP_Archive not installed: generated phar will require PHP's phar extension be enabled.
clicommand.inc
directorygraphiterator.inc
[Code]...
View 1 Replies
View Related
Feb 28, 2011
When I am using emacs under GNU Screen, if I call C-x C-s screen hangs and does not respond to any keyboard input.
I can't reproduce this, but at least one time per day I have to kill my screen session and restart it.
View 1 Replies
View Related
Jun 21, 2010
I might need to switch to i686 ArchLinux as flashplugin has been removed from the 64 bit version. Also, i could then install virtualbox-ose. Since 32bit os has 4G limitation, is a swap partition even needed/used on a system with more than 4G hardware ram?
View 11 Replies
View Related
Jun 2, 2010
Sometimes you get more than you ask for and in this case, I did: I had no idea (had the computer for a few years now) that I was running a dual core 64 bit machine. The silly thing is that I have 32bit Fedora 11 on it, 32 bit versions of all my installed software...etc., etc. Am I able at this point to salvage anything or is it best to just back up the home directory and then do a reinstall?
View 8 Replies
View Related
Jan 9, 2011
Sometimes when my machine tries to boot ubuntu it works SOMETIMES, but most of the time it hangs on a certain driver/message. I've disabled the silent splash to show you guys where it freezes.
Quote:
Marking TSC unstable due to TSC halts
Switching to clocksource hpet
thermal LNXTHERM:01: registered as thermal_zone1
ACPI: Thermal Zone [T22] (67C)
[Code]....
And then it stops there. I think ATA_PIIX is some ubuntu ata driver, but I don't know why there since my hard-drive passes all the S.M.A.R.T tests.
Keep in mind it SOMETIMES, but not very often, boots.
Edit: This machine was used with Ubuntu 8.10 before, and possibly 9.04, but that was before they introduced Audio for Intel HDA's Sigmatel. This is also a clean install.
View 2 Replies
View Related
Jan 19, 2010
not related to this thread [URL]
On a few VMs. Sometimes, when powering them on I get the GNU GRUB menu...
Code:
GNU GRUB version 1.97~beta4
Ubuntu, Linux 2.6.31-14-generic
ubuntu, Linux 2.6.31-14-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtest86+, serial console 115200)
etc
But there is no countdown for a default boot. It just hangs here. Indefinitely. Until I make a choice by pressing the enter key with "Ubuntu, Linux 2.6.31-14-generic" highlighted (default). I don't know if this is because the VM may not have been shutdown properly or what the case is, but this is unacceptable as I need these systems to continue to boot and get back on line regardless of the reason they were powered off.
View 3 Replies
View Related
Aug 14, 2010
I'm installing Ubuntu 10.4 DTE on an Acer netbook. The netbook came with Microsoft Windows installed and I'm adding Ubuntu via wubi on a USB thumb drive.
I'm almost done and it is configuring grub-pc. The last line is: Setting up grub-pc (2.98-lubuntu7) ... Then it hangs.
On the web, I find numerous bug reports about my situation, but no work arounds. What do I do?
View 1 Replies
View Related
Aug 4, 2010
I have Mythbuntu 10.04 installed on an exclusive HTPC and working great... until tonight. After letting the system update some packages (161 packages if I remember right), I suddenly have an issue where the graphical system won't start. After researching I found three error messages that might be causing that.
1. At the start of splash screen I see "UUID=xxxxxxxCD7 not ready yet or not present" I checked in /etc/fstab and found that this is the swap partition. I don't remember seeing this before so this could be the culprit.
2. I'm not at the computer in question right now but I saw a Plymouth error about "mountall" and then the message "plymouth command failed". Not sure if this could be the main error.
3. after a while (usually ca. 1-2 min) I receive thousands of errors of the kind "out of memory"... "kill process XXXX" (process vary wildly e.g. dbus-daemon, mysql, etc)... "process killed"..."respawning"
After error 3, I'm not able to switch to graphical console (ctrl-alt-F7). If I was in the graphical console at this moment, I simply can't switch to the CLI console. I'm always afraid of updating my system since I've seen lots of things breaking afterwards (usually the proprietary graphic drivers) but this is really strange.
View 1 Replies
View Related
Jun 21, 2011
After I shutdown my laptop while it was updating it's downloaded packages via yum update I faced an error saying " Duplicate packages..." in next yum updateSo I did the following tasks from package-cleanup --dupes # listout duplicatespackage-cleanup --cleandupes # clean up duplicatesIt erased around 600 packagesat was about 6Giafter restarting my fedora hang while loading and completing Fedora Logo..
View 2 Replies
View Related
