Hardware :: Nvidia Quadro 980 XGL CentOS 5.4 Driver Install Automation Ks.cfg?

Jan 19, 2010

Im trying to add the binary NVIDIA-Linux-x86-96.43.14-pkg1.run in my CentOS 5.4 ks.cfg file. The problem is that when you manually run the program it asks you questions and you have to respond with ok if you agree to their licensing terms. I want to be able to include this binary in my kickstart so when my machine boots up for the first time this driver is already installed and I don't have to waste time troubleshooting video issues. Is there anyway I can do this?

View 3 Replies


ADVERTISEMENT

General :: Driver Installation For Nvidia Quadro Fx 380 LP In Redhat 5.4

Oct 31, 2010

I'm new to linux and trying to install the driver for Nvidia quardo fx 380 lp in redhat 5.4.From the Nvidia site I got the driver for this card to be NVIDIA-Linux-x86-260.19.12. I did check version of the gcc and kernel built by the gcc version. I also checked the following commands. # cat /proc/version Linux version 2.6.18-194.el5PAE (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Fri Oct 29 22:00:21 EDT 2010

[Code]....

View 10 Replies View Related

OpenSUSE Hardware :: NVidia Quadro FX1000 Driver - Error While Creating Client Module OneClickInstallUI

May 25, 2010

I installed [URL] and everything mixed up! I tried to remove it and I get this error: Error while creating client module OneClickInstallUI My Graphic Card is NVidia Quadro FX

View 5 Replies View Related

CentOS 5 Hardware :: Dual Monitor Video Card - NVidia Quadro FX 580?

Nov 24, 2010

I have repeatedly installed CentOS 5.5 64-bit on a Dell T3500 with an nVidia Quadro FX 580, in an attempt to get dual monitor support to work to no avail. Everything works fine when just one monitor is plugged in and I do not try to enable or plug in a second monitor. I have installed the Dell DKMS, and the Dell recommended drivers (from Dell site) on one installation, I installed the nVidia drivers (from nVidia site) on another, and have tried with what CentOS loads by default on another. The results are the same every time: When I reboot as directed I get a black screen. I can recover by hard shutdown and unplugging one of the monitors, but that doesn't solve my problem. Has anyone had a similar experience, or have any helpful guidance? I am not very Linux savvy. This is for multiple machines in a corporate environment.

Information for general problems.

== BEGIN uname -rmi ==
2.6.18-194.26.1.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==

[Code]...

View 3 Replies View Related

Ubuntu :: Install 64bit Onto Dell T3500 With NVidia Quadro NVS 295?

May 4, 2010

Trying to install 64bit onto Dell T3500 with NVidia Quadro NVS 295. Live Cd works and Install completes. When I boot I get BIOS and Disk info then boot switches to flashing cursor after disk read and then Monitor goes into sleep mode.

View 6 Replies View Related

Ubuntu :: Black Screen After Install - Running A NVIDIA Quadro NVS 295 Video Card

Jul 28, 2010

I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.

View 9 Replies View Related

CentOS 5 :: 5.6 - Install Nvidia Graphics Driver?

Apr 12, 2011

I have just had to install CentOS 5.6 on a family members computer, as they lost there Windows XP key. Anyway, I am needing to install a new nvidia graphics driver. I found a howto on this forum for 5.2 [URL]

View 5 Replies View Related

General :: Only One GPU Detected In The Nvidia Quadro NVS 450

Jan 11, 2011

I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia...Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there):

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010
Section "ServerLayout"
# Removed Option "Xinerama" "1"

[code]...

View 1 Replies View Related

Ubuntu :: NVIDIA Quadro NVS 450 - Blank Screen

Oct 5, 2010

I have just bought a Dell Optiplex 960 with a NVIDIA Quadro NVS 450. Everything works out of the box with the 10.04.1 Live CD. It suggests to install and activate NVIDIA proprietary drivers, but you need to restart the machine afterwards. The problem is that, after that, all what you get is a blank screen, with not even a cursor. The same happens when you install Lucid: blank screen with no cursor. Ctrl+F1 does not show anything, but Ctrl+Alt+Prnt Scrn+REISUB works and the PC is reset. In the var directory the logs show that the NVIDIA module is not loaded.

View 2 Replies View Related

Ubuntu :: Nvidia Quadro NVS 135M - Poor Video?

Jan 24, 2011

Like the title says, I have the Quadro NVS 135M in my Dell D630. It's working (well, besides the startup screen issue - Plymoth... not a fan!), but when I watch a movie the image ?flickers? annoyingly. This is something I have never experienced before, with allegedly ?inferior? video cards. It's odd though, isn't it - better video card, inferior output!?!

View 1 Replies View Related

Fedora :: Install The Nvidia Quadro NVS 110 169.04 Drivers - Error "No Precompiled Kernel Interface Was Found To Match Your Kernel"

Nov 2, 2009

I am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?

which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option

View 5 Replies View Related

Ubuntu Multimedia :: NVidia Quadro NVS 110M Difficult To Identify

Apr 2, 2010

I come here every two or three years, when I have some troubles with my graphic card. Indeed, once again. Since last Tuesday, I experience some system freeze. Since yesterday, I must run on low graphic mode. As there has not been any X.org or driver update, I suspect that my graphic card is running down. But I do not know how to diagnose this.

My configuration:
-- Dell Latitude D820 laptop;
-- processor Intel Core 2 Duo T7200 (2.0GHz 667MHz FSB);
-- bi-canal 2x1024Mo DDR2-SDRAM 533MHz memory;
-- graphic card NVIDIA Quadro NVS 110M 256MB;
-- 15.4" WSXGGA+ (1680 x 1050) LCD screen;
-- 100Go SATA (7200 TPM)) hard-drive;
-- 8x DVD +/- RW burner;
-- battery 9 cells 85 WHr LI-ION;
-- Bluetooth card for Latitude;
-- Intel PRO/Wireless 3945 802.11a/g;
-- Ubuntu Linux 9.04 Jaunty Jackalope desktop 64 bits real-time kernel.

Some commands results:
Code:
$ lspci | grep -i vga
01:00.0 VGA compatible controller: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1) .....

View 4 Replies View Related

Debian Configuration :: Thinkpad W510 - Squeeze 64-bit And NVIDIA Quadro FX 880M

Feb 14, 2010

I am running Debian Squeeze ( kernel 2.6.32-trunk) 64-bit on this machine - "most" of the hardware can talk to Linux or vice-versa. I am, however, having trouble finding a suitable free / non-free driver to work with the abovementioned card. It would seem that this card is too "new" at the moment (February 2010).

View 3 Replies View Related

Ubuntu :: Dell Optiplex 960 With NVIDIA Quadro NVS 450 - Blank Screen With No Cursor??

Oct 5, 2010

I have just bought a Dell Optiplex 960 with a NVIDIA Quadro NVS 450. Everything works out of the box with the 10.04.1 Live CD. It suggests to install and activate NVIDIA proprietary drivers, but you need to restart the machine afterwards.The problem is that, after that, all what you get is a blank screen, with not even a cursor.The same happens when you install Lucid: blank screen with no cursor.

Ctrl+F1 does not show anything, but Ctrl+Alt+Prnt Scrn+REISUB works and the PC is reset.In the var directory the logs show that the NVIDIA module is not loaded.

View 2 Replies View Related

Ubuntu :: Uninstall The Nouveau Driver And Install NVIDIA-x86-71.86.14-pkg1.run For Old Nvidia TNT2 Card?

Nov 30, 2010

Only about 1.5 weeks into Linux guys so bear with me. I'm trying to uninstall the Nouveau driver and install NVIDIA-Linux-x86-71.86.14-pkg1.run for my old Nvidia TNT2 card. Following these directions I run into a problem in the first step. When I execute the Ctrl+Alt+F1 command and get:

Ubuntu 10.10 splat-desktop tty1 splat-desktop login: if I enter splat which I believe is my username and the correct p/w I get an incorrect login response.

View 3 Replies View Related

Fedora Installation :: NVIDIA Quadro FX And 10 - System Always Locks Up During The 'Anacron' Testing Sequence

Feb 18, 2009

I recently purchased a Quadro FX 4800 and tried to install it on Fedora 10. During the installation, Fedora didn't recognize my new graphics card and began installing the OS in text mode. I stopped the installation and tried to start over, this time I passed the following command: linux resolution=1024x768. I then proceeded with the installation, and again, I was posed with a text mode installation. I continued with the text mode install and when Fedora was done installing, I rebooted and system just locked up.

At this point I was frustrated, so I reinstalled my old 8800 graphics card and started a new install with something that worked in the past. When the install was done, I loaded the latest NVIDIA drivers and the rebooted. I reinstalled my new graphics card (Quadro FX 4800) then powered up my system. I thought everything was good to go and all of a sudden my system flickered and then locked up during the 'Anacron' testing phase. I then rebooted with the "Ctrl+Alt+Del" hotkeys, but my system always locks up during the 'Anacron' testing sequence. I am aware that the Quadro FX 4800 is a few months old, but how can I get it to work in linux? It has gotten so bad, that I had to resort to using MS Vista.

System specs:
Intel Core Duo Quad Core
4 gigs DDR2
SATA RAID 0
Mobo: 680i SLI
800WATT Power Supply

View 5 Replies View Related

Ubuntu :: 10.04 X64 / Nvidia Quadro NVS / Dell E6500 - Cannot Display This Mode' On The Primary Monitor

May 21, 2010

I am posting this to hear if there are others with display issues on Dell E6500 laptop with the Nvidia Quadro NVS 160 driver. This problem is starting to annoy me a great deal, but I am uncertain how I should move forward. In short; I have Ubuntu 10.04 x64 installed on my Dell E6500 laptop. When using only the laptop, everything works great. The second I plug it into the docking station (the laptop lid closed) and want to use my two external monitors (Dell 2001FP) I'm in trouble. I cant see anything and what I get is a 'DVI: Cannot Display this Mode' on the primary monitor - If i try a regular VGA cable I get nothing but a black screen.

I have played around with the Nvidia config but it cant find my monitors and therefore I cant do much. I am aware of the various "hack the xorg.conf" options, but I before I do that I wanted to see if others had experienced the same thing. I had hoped that we were pasted the hack stage and that primary functions such as display would work by now.

View 9 Replies View Related

Ubuntu :: Nvidia Driver Install Killed Display / Remove This Driver When I See Nothing?

Aug 8, 2010

Can do nothing with the PC. New install of 10.04 and was prompted to install Nvidia driver. Did so. Rebooted, now have nothing except a thin line at top of screen. How can I remove this driver when I see nothing?

View 2 Replies View Related

Debian :: Can't Install Driver Dowload Driver From Nvidia?

Mar 5, 2011

install debian 6 on my pc and have big problem with videoadapter driver i cannot install driver i dowload driver from nvidia do something in google but nothing! palit gtx 460 linux debian 6 x64.

View 3 Replies View Related

Fedora Installation :: FC11 X64 Dell T5400 Dual Nvidia Quadro FX 1700 Fails To Graphically Boot

Sep 4, 2009

I'm running into this issue after installing Fedora Core 11 off DVD. Anaconda install the first part of the installation, then after reboot it goes into run level 3 (I think, where you have to login as root) I noticed that it said xserver failed to load before it actually boots Anaconda.

Maybe I should pull a graphic's card? I have logged in as root after the base install and did a lspci, and you can see the two Nvidia Quadro FX1700's and you can tell it is an intel board with the Intel Corp 6311ESB/6321ESB PCI Express ports. Also you can navigate through the linux directories via ls \. I tried YUM to find/install the graphics drivers but it says something about metadata not being configured. I checked the IP address with ifconfig and had to manually assign an ip.

View 14 Replies View Related

CentOS 5 :: Nvidia Driver Rebuild Necessary After (each) Kernel Upgrade?

Oct 6, 2010

I have an Nvidia graphics card,... actually I manage several workstations that run centos and have an nvidia video card. I also have a personal computer with ubuntu and an nvidia network card.

I would like to do a regular automatic update of those Centos workstations. (With a pilot group to test and then a full roll-out). Until oktober 2009 no major difference in automatic updating ubuntu and centos (apart from the differences between apt and yum):

After a kernel upgrade, the systems can not boot into it's Xorg gui, because the nvidia driver must be rebuild (=not recompiled, because this is partially object code, the driver is not opensource).

But from ubuntu 9.10 onwards, the kernel update process checks for the presence of propietary drivers like those of nvidia and does a rebuild on the reboot, so that the system can succesfully boot into the xorg GUI (and gdm or kdm) My question is: Are ther any plans for Centos to do the same, this would relief me from some upgrade hassle for the Centos workstations that I manage. Or does anyone know about a (good) automagic workaround?

View 6 Replies View Related

Debian Installation :: NVIDIA Quadro NVS 295 - Make Sure During Installation That GRUB Gets Configured To Stay In Character Mode Only?

Mar 2, 2011

I am trying to get Debian 6 to work on an hp Z400 - the problem is that it came with a NVIDIA Quadro NVS 295 graphics card; there may be a driver for Linux, but it doesn't matter, because GRUB insists on switching to some sort of graphics mode and the screen just blanks and switches itself off. Is there any way to make sure during installation that GRUB gets configured to stay in character mode only?

View 6 Replies View Related

Hardware :: Best Place To Get NVidia Video Driver Update CentOS 5.5?

Jan 27, 2011

What is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia?

Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.

View 6 Replies View Related

CentOS 5 Hardware :: Nvidia Geforce GTS250 Driver Installation?

Oct 6, 2010

the installation of the driver of the nvidia geforce GTS 250 fails. is it due to CENTOS or Nvidia driver?

#note1
CentOS version: 5.5
#note 2:
in the following "uname -a" output:
Linux localhost.localdomain 2.6.18-194.17.1.el5PAE #1 SMP Wed Sep 29 13:31:51 EDT 2010 i686 i686 i386 GNU/Linux
#note 3:
in the following "/var/log/nvidia-installer.log" content:

[Code]...

View 3 Replies View Related

CentOS 5 Hardware :: NVidia Driver Xorg High CPU Utilization

Nov 12, 2010

I installed the NVIDIS driver for 64b Linux, and now I face a high cpu utilization (up to 40%) in the XORG when I swith from one application to another. I need the driver because otherwise some web pages are rendered with a something like a watermark

LSPCI
01:00.0 VGA compatible controller: nVidia Corporation G98M [Quadro NVS 160M] (rev a1) (prog-if 00 [VGA controller])
Subsystem: Dell Unknown device 024f
Flags: bus master, fast devsel, latency 0, IRQ 169
Memory at f5000000 (32-bit, non-prefetchable) [size=16M]
Memory at e0000000 (64-bit, prefetchable) [size=256M]
Memory at f2000000 (64-bit, non-prefetchable) [size=32M]
I/O ports at df00 [size=128]
[virtual] Expansion ROM at f4000000 [disabled] [size=128K]
Capabilities: <access denied>

NVidia driver
260.19.21
uname -r
2.6.18-194.26.1.el5

View 3 Replies View Related

CentOS 5 Hardware :: Get Updated NVidia Video Driver For 5.5 Version?

Jan 27, 2011

What is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia? Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.

View 1 Replies View Related

OpenSUSE Hardware :: 11.1 Nvidia Quadro FX-5000 (190.53) - Fatal Server Error: Caught Signal 11. Server Aborting

Mar 3, 2010

I am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:

[Code]...

...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.

View 1 Replies View Related

CentOS 5 Hardware :: NVIDIA Geforce 8600M GS Driver - Graphic Output Is Not Good?

Oct 6, 2009

My graphic output is not that nice. How do I find out what kind of driver Centos is using? Can I fine-tune its performance? I tried to install the driver(NVIDIA-Linux-x86-185.18.36-pkg1) from NVIDIA website but it failed. I got the following log file.

---
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Tue Oct 6 15:33:24 2009
installer version: 1.0.7[code]....
ERROR: You appear to be running an X server; please exit X before installing.For further details, please see the section INSTALLING THE NVIDIA DRIVER in the README available on the Linux driver download page at[url]...

View 1 Replies View Related

OpenSUSE Install :: Nvidia Geforce 8200 Driver Install Error - Version.h Not Found

Jan 11, 2011

After a disk crash I reinstalled openSuSE 11.2 and as always downloaded the latest Nvidia driver for my geforce 8200 graphics.

Unlike all previous cases, this time the driver does not install. The contents of /var/log/nvidia-installer.log are below. The error refers to being unable to to locate version.h

PATH:

Using: nvidia-installer ncurses user interface

ERROR:

View 9 Replies View Related

Fedora :: Install The Nvidia Driver?

Nov 24, 2010

I'm somewhat new to Fedora but not Linux in general. I went to install the nvidia driver as per any instructions I found on the internet that yielded results. I typed sudo yum install kmod-nvidia and eventually got a driver, blacklisted nouveau, restarted, and finally got compiz and all my desktop effects.

The problem was when I played Minecraft, which for those who don't know is a game, from a .jar file. After ~5 minutes of playing something happens and everything freezes. Video completely stops but I still have mouse control and sound(at least for anything already running). Clicking stuff does nothing and no hotkeys work to bring up anything at all. I end up having to do a reset by hand to get anything done. Turning off desktop effects didn't help.

Why is this? Did I install the wrong driver, even though kmod-nvidia should find the right one on it's own? nvidia 8800 GT is my card. Could it be the java program screwing things up royally? I can't remember if the program worked fine on it's own before the driver install, but uninstalling the driver now causes the game to fail on launch, which I guess makes sense but can't figure out if it's simply the lack of driver or if removing the driver screwed something else up. I might just reinstall fedora and start from scratch again, but before I did that I wanted to find out if I'm just installing the wrong driver and can simply find teh right one to fix all of this.

View 8 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved