General :: Only One GPU Detected In The Nvidia Quadro NVS 450

Jan 11, 2011

I just built myself an new workstation and now only 2 of 3 monitors are working. I built the nvidia driver by downloading it and installing with ./Nvidia...Before when I ran nvidia-settings I saw two GPUs listed but now I only see one. Xorg Config (Not sure how I ended up with 3 devices in there):

# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 256.35 (buildmeister@builder101) Wed Jun 16 19:25:39 PDT 2010
Section "ServerLayout"
# Removed Option "Xinerama" "1"

[code]...

View 1 Replies


ADVERTISEMENT

General :: Driver Installation For Nvidia Quadro Fx 380 LP In Redhat 5.4

Oct 31, 2010

I'm new to linux and trying to install the driver for Nvidia quardo fx 380 lp in redhat 5.4.From the Nvidia site I got the driver for this card to be NVIDIA-Linux-x86-260.19.12. I did check version of the gcc and kernel built by the gcc version. I also checked the following commands. # cat /proc/version Linux version 2.6.18-194.el5PAE (mockbuild@x86-007.build.bos.redhat.com) (gcc version 4.1.2 20080704 (Red Hat 4.1.2-48)) #1 SMP Fri Oct 29 22:00:21 EDT 2010

[Code]....

View 10 Replies View Related

Ubuntu :: NVIDIA Quadro NVS 450 - Blank Screen

Oct 5, 2010

I have just bought a Dell Optiplex 960 with a NVIDIA Quadro NVS 450. Everything works out of the box with the 10.04.1 Live CD. It suggests to install and activate NVIDIA proprietary drivers, but you need to restart the machine afterwards. The problem is that, after that, all what you get is a blank screen, with not even a cursor. The same happens when you install Lucid: blank screen with no cursor. Ctrl+F1 does not show anything, but Ctrl+Alt+Prnt Scrn+REISUB works and the PC is reset. In the var directory the logs show that the NVIDIA module is not loaded.

View 2 Replies View Related

Ubuntu :: Nvidia Quadro NVS 135M - Poor Video?

Jan 24, 2011

Like the title says, I have the Quadro NVS 135M in my Dell D630. It's working (well, besides the startup screen issue - Plymoth... not a fan!), but when I watch a movie the image ?flickers? annoyingly. This is something I have never experienced before, with allegedly ?inferior? video cards. It's odd though, isn't it - better video card, inferior output!?!

View 1 Replies View Related

Ubuntu Multimedia :: NVidia Quadro NVS 110M Difficult To Identify

Apr 2, 2010

I come here every two or three years, when I have some troubles with my graphic card. Indeed, once again. Since last Tuesday, I experience some system freeze. Since yesterday, I must run on low graphic mode. As there has not been any X.org or driver update, I suspect that my graphic card is running down. But I do not know how to diagnose this.

My configuration:
-- Dell Latitude D820 laptop;
-- processor Intel Core 2 Duo T7200 (2.0GHz 667MHz FSB);
-- bi-canal 2x1024Mo DDR2-SDRAM 533MHz memory;
-- graphic card NVIDIA Quadro NVS 110M 256MB;
-- 15.4" WSXGGA+ (1680 x 1050) LCD screen;
-- 100Go SATA (7200 TPM)) hard-drive;
-- 8x DVD +/- RW burner;
-- battery 9 cells 85 WHr LI-ION;
-- Bluetooth card for Latitude;
-- Intel PRO/Wireless 3945 802.11a/g;
-- Ubuntu Linux 9.04 Jaunty Jackalope desktop 64 bits real-time kernel.

Some commands results:
Code:
$ lspci | grep -i vga
01:00.0 VGA compatible controller: nVidia Corporation G72M [Quadro NVS 110M/GeForce Go 7300] (rev a1) .....

View 4 Replies View Related

Ubuntu :: Install 64bit Onto Dell T3500 With NVidia Quadro NVS 295?

May 4, 2010

Trying to install 64bit onto Dell T3500 with NVidia Quadro NVS 295. Live Cd works and Install completes. When I boot I get BIOS and Disk info then boot switches to flashing cursor after disk read and then Monitor goes into sleep mode.

View 6 Replies View Related

Hardware :: Nvidia Quadro 980 XGL CentOS 5.4 Driver Install Automation Ks.cfg?

Jan 19, 2010

Im trying to add the binary NVIDIA-Linux-x86-96.43.14-pkg1.run in my CentOS 5.4 ks.cfg file. The problem is that when you manually run the program it asks you questions and you have to respond with ok if you agree to their licensing terms. I want to be able to include this binary in my kickstart so when my machine boots up for the first time this driver is already installed and I don't have to waste time troubleshooting video issues. Is there anyway I can do this?

View 3 Replies View Related

Debian Configuration :: Thinkpad W510 - Squeeze 64-bit And NVIDIA Quadro FX 880M

Feb 14, 2010

I am running Debian Squeeze ( kernel 2.6.32-trunk) 64-bit on this machine - "most" of the hardware can talk to Linux or vice-versa. I am, however, having trouble finding a suitable free / non-free driver to work with the abovementioned card. It would seem that this card is too "new" at the moment (February 2010).

View 3 Replies View Related

Ubuntu :: Dell Optiplex 960 With NVIDIA Quadro NVS 450 - Blank Screen With No Cursor??

Oct 5, 2010

I have just bought a Dell Optiplex 960 with a NVIDIA Quadro NVS 450. Everything works out of the box with the 10.04.1 Live CD. It suggests to install and activate NVIDIA proprietary drivers, but you need to restart the machine afterwards.The problem is that, after that, all what you get is a blank screen, with not even a cursor.The same happens when you install Lucid: blank screen with no cursor.

Ctrl+F1 does not show anything, but Ctrl+Alt+Prnt Scrn+REISUB works and the PC is reset.In the var directory the logs show that the NVIDIA module is not loaded.

View 2 Replies View Related

CentOS 5 Hardware :: Dual Monitor Video Card - NVidia Quadro FX 580?

Nov 24, 2010

I have repeatedly installed CentOS 5.5 64-bit on a Dell T3500 with an nVidia Quadro FX 580, in an attempt to get dual monitor support to work to no avail. Everything works fine when just one monitor is plugged in and I do not try to enable or plug in a second monitor. I have installed the Dell DKMS, and the Dell recommended drivers (from Dell site) on one installation, I installed the nVidia drivers (from nVidia site) on another, and have tried with what CentOS loads by default on another. The results are the same every time: When I reboot as directed I get a black screen. I can recover by hard shutdown and unplugging one of the monitors, but that doesn't solve my problem. Has anyone had a similar experience, or have any helpful guidance? I am not very Linux savvy. This is for multiple machines in a corporate environment.

Information for general problems.

== BEGIN uname -rmi ==
2.6.18-194.26.1.el5 x86_64 x86_64
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==

[Code]...

View 3 Replies View Related

Fedora Installation :: NVIDIA Quadro FX And 10 - System Always Locks Up During The 'Anacron' Testing Sequence

Feb 18, 2009

I recently purchased a Quadro FX 4800 and tried to install it on Fedora 10. During the installation, Fedora didn't recognize my new graphics card and began installing the OS in text mode. I stopped the installation and tried to start over, this time I passed the following command: linux resolution=1024x768. I then proceeded with the installation, and again, I was posed with a text mode installation. I continued with the text mode install and when Fedora was done installing, I rebooted and system just locked up.

At this point I was frustrated, so I reinstalled my old 8800 graphics card and started a new install with something that worked in the past. When the install was done, I loaded the latest NVIDIA drivers and the rebooted. I reinstalled my new graphics card (Quadro FX 4800) then powered up my system. I thought everything was good to go and all of a sudden my system flickered and then locked up during the 'Anacron' testing phase. I then rebooted with the "Ctrl+Alt+Del" hotkeys, but my system always locks up during the 'Anacron' testing sequence. I am aware that the Quadro FX 4800 is a few months old, but how can I get it to work in linux? It has gotten so bad, that I had to resort to using MS Vista.

System specs:
Intel Core Duo Quad Core
4 gigs DDR2
SATA RAID 0
Mobo: 680i SLI
800WATT Power Supply

View 5 Replies View Related

Ubuntu :: 10.04 X64 / Nvidia Quadro NVS / Dell E6500 - Cannot Display This Mode' On The Primary Monitor

May 21, 2010

I am posting this to hear if there are others with display issues on Dell E6500 laptop with the Nvidia Quadro NVS 160 driver. This problem is starting to annoy me a great deal, but I am uncertain how I should move forward. In short; I have Ubuntu 10.04 x64 installed on my Dell E6500 laptop. When using only the laptop, everything works great. The second I plug it into the docking station (the laptop lid closed) and want to use my two external monitors (Dell 2001FP) I'm in trouble. I cant see anything and what I get is a 'DVI: Cannot Display this Mode' on the primary monitor - If i try a regular VGA cable I get nothing but a black screen.

I have played around with the Nvidia config but it cant find my monitors and therefore I cant do much. I am aware of the various "hack the xorg.conf" options, but I before I do that I wanted to see if others had experienced the same thing. I had hoped that we were pasted the hack stage and that primary functions such as display would work by now.

View 9 Replies View Related

Ubuntu :: Black Screen After Install - Running A NVIDIA Quadro NVS 295 Video Card

Jul 28, 2010

I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.

View 9 Replies View Related

OpenSUSE Hardware :: NVidia Quadro FX1000 Driver - Error While Creating Client Module OneClickInstallUI

May 25, 2010

I installed [URL] and everything mixed up! I tried to remove it and I get this error: Error while creating client module OneClickInstallUI My Graphic Card is NVidia Quadro FX

View 5 Replies View Related

Fedora Installation :: FC11 X64 Dell T5400 Dual Nvidia Quadro FX 1700 Fails To Graphically Boot

Sep 4, 2009

I'm running into this issue after installing Fedora Core 11 off DVD. Anaconda install the first part of the installation, then after reboot it goes into run level 3 (I think, where you have to login as root) I noticed that it said xserver failed to load before it actually boots Anaconda.

Maybe I should pull a graphic's card? I have logged in as root after the base install and did a lspci, and you can see the two Nvidia Quadro FX1700's and you can tell it is an intel board with the Intel Corp 6311ESB/6321ESB PCI Express ports. Also you can navigate through the linux directories via ls \. I tried YUM to find/install the graphics drivers but it says something about metadata not being configured. I checked the IP address with ifconfig and had to manually assign an ip.

View 14 Replies View Related

Debian Installation :: NVIDIA Quadro NVS 295 - Make Sure During Installation That GRUB Gets Configured To Stay In Character Mode Only?

Mar 2, 2011

I am trying to get Debian 6 to work on an hp Z400 - the problem is that it came with a NVIDIA Quadro NVS 295 graphics card; there may be a driver for Linux, but it doesn't matter, because GRUB insists on switching to some sort of graphics mode and the screen just blanks and switches itself off. Is there any way to make sure during installation that GRUB gets configured to stay in character mode only?

View 6 Replies View Related

OpenSUSE Hardware :: 11.1 Nvidia Quadro FX-5000 (190.53) - Fatal Server Error: Caught Signal 11. Server Aborting

Mar 3, 2010

I am having a strange problem with the Opensuse 11.2 Xorg server. Graphics hardware is Nvidia Quadro FX-5000, driver is ver 190.53. 90% of the time, I am getting a seg violation from the Xserver on trying to login via kdm:

[Code]...

...is the error that is present in the "kdm.log" file. So far, it doesn't seem to be user dependent (happens either as root or joe random user,) Again, so far, it only seems to happen with "driver nvidia" enabled in the config file, not with "driver nv" The failure occurs shortly after hitting return on the login screen. After it fails, it starts up a new Xserver, and presents a new login screen. Repeated attempts seem to *eventually* succeed, but 90% of the time, it fails I strongly suspect the Nvidia driver, but I have not been able to find anything documenting any similar problems.

View 1 Replies View Related

General :: NVidia Nforce Ethernet Card Not Detected In RHEL 5

Jun 8, 2010

I use an nVidia nforce MCP73 ethernet card on Red Hat Enterprise Linux. It is not getting detected and hence I'm unable to configure my network.

View 14 Replies View Related

Fedora :: Install The Nvidia Quadro NVS 110 169.04 Drivers - Error "No Precompiled Kernel Interface Was Found To Match Your Kernel"

Nov 2, 2009

I am trying to install the Nvidia Quadro NVS 110 169.04 drivers but am having issues during install. Prior to attempting my install I did install the kernel-devel rpm so it can compile. after running the RPM I get. Quote: No precompiled kernel interface was found to match your kernel; would you like the installer to attempt to download a kernel interface for your kernel from the NVIDIA ftp site [URL]?

which of course does not work. next it says Quote: "No precompiled kernel interface was found to match your kernel; this means that the installer will need to compile a new kernel interface.. i hit okay and move on to. Quote: Error: Unable to find the kernel sources tree for the currently running kernel. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat linux systems, for example be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. if you know the correct kernel source files are installed, you may specify the kernel source path with the "--kernel-source-path' command line option

View 5 Replies View Related

General :: How To Install Nvdia Quadro NVS 110m On Red Hat Enterprise System 6 Beta

May 31, 2010

I am a newbie with Linux and I am eager to learn it .
I installed RHEL6 beta on My Dell D620 and everything seems to be fine except the Video Driver. I installed the Desktop and the Video card of my laptop is NVIDIA QUADRO NVS110M with the max resolution 1440x900. The max resolution I have now is 1024x768.I want to install the NVDIA driver,I already downloaded the RPMS from http://www.atrpms.net/ website but I am afraid it won't work because of dependencies..if I try to use the hard way by using rpm -Uhv.
Is there any other way for example using YUM or other ways.If I use YUM what command I have to type.

View 4 Replies View Related

Debian Hardware :: No NVIDIA GPU Detected

Jan 27, 2016

I cannot install Nvidia driver. After installation I have only text mode. I tried install this and I do no know whether I choose an appropriate version. Should I install 360.45 version? I have the following output of the command nvidia-detect:

Code: Select allNo NVIDIA GPU detected.

Why this command doesnot recognize my equipment?

I use Jessie 8.3. netinstall.

Code: Select alllspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Haswell-ULT Integrated Graphics Controller [8086:0a16] (rev 0b)

Code: Select alllspci
00:00.0 Host bridge: Intel Corporation Haswell-ULT DRAM Controller (rev 0b)
00:02.0 VGA compatible controller: Intel Corporation Haswell-ULT Integrated Graphics Controller (rev 0b)
00:03.0 Audio device: Intel Corporation Haswell-ULT HD Audio Controller (rev 0b)
00:14.0 USB controller: Intel Corporation 8 Series USB xHCI HC (rev 04)
00:16.0 Communication controller: Intel Corporation 8 Series HECI #0 (rev 04)

[CODE]....

View 14 Replies View Related

Ubuntu :: Nvidia Graphics Card Not Detected?

May 8, 2009

I got Linux Ubuntu because my Vista installation messed up, and I couldnt find the recovery CD. Im pretty glad I installed Linux, as it seems really freidnly, and a bit more open that Windows, I must admit. The problem is, I am trying to install my Nvidia GeForce 8600GTS on the system, and it isnt working. It was working fine on Vista before, so it shouldnt be a hardware problem. I have followed various instructions on websites, whioch take me throguh some stuff about stopping GNOME, removing * linux restricted module * and so on. But when I get to the crucial point, with the agreements and installations for Nvidia, it tells me it cant detect any graphics cards.

View 11 Replies View Related

Software :: VGA Output Not Detected With Nvidia 256.44 Driver

Aug 22, 2010

I'm having a problem with getting the VGA out to work on my laptop. I have a Sony Vaio F series running Fedora 13 64bit with an Nvidia 330M on driver 254.44. Quite simply, the VGA out is not detected although the HDMI out is. how to correct this?

View 2 Replies View Related

Ubuntu Multimedia :: NVIDIA Drivers: No Devices Detected

Jun 6, 2011

I'm having issues getting the nvidia-current drivers working with a GeForce 8400 graphics card on Ubuntu 10.10 (x64). After running nvidia-xconfig and restarting, X fails to start with an error: No devices detected.

Here is my xorg.conf:

Code:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"

[code]....

View 3 Replies View Related

Fedora :: Amarok Version Mismatch Detected (NVidia Driver)

Jun 19, 2010

I attempted to run amarok from the menu and found it would never start there was no activity, I then tried to start it from the command line and I recieved this error..

Version mismatch detected between the NVIDIA libGL.so
and libGLcore.so shared libraries (libGL.so version:
195.36.31; libGLcore.so version: 195.36.24).
Please try reinstalling the NVIDIA driver.

This is a fresh install of Fedora 13, the kmod-nvidia drivers were just fixed I assume cause I tried to install them for a few days and they would fail. Well I guess they finally fixed the Nvidia drivers for 2.6.33.5-124.fc13.x86_64 but it has broken amarok..

View 4 Replies View Related

Ubuntu Multimedia :: Nvidia GeForce 6800 No TV Detected Via S-Video

May 21, 2010

I have thrown together a frankenstein of spare parts to stream video onto my TV. The GPU is a NX6800GS (geforce 6800). I have used the restricted driver tool to intsal the recommended driver. The VGA output works fine. My problem is that when using the nvidia tool to set up my TV through S-Video on the graphics card, the TV is not detected. This puts me at a dead end, as every how to guide on this forum assumes the nvidia control panel can detect the TV. Can i force video to play over the S-Video port? Do i need some magical unicorn drivers for the card? Any help is appreciated (even a simple "this setup will never work").

View 9 Replies View Related

Ubuntu Multimedia :: Nvidia HDMI Audio Output Not Detected

Jul 25, 2011

I am interested in finding out the best way to get my audio to work from HDMI through my NVIDIA card.

[code]....

I don't get an option for HDMI. Here is the interesting part. The sounds work sometimes but not all the times. Most of the time the sound works on the OS default sounds but wont work for movies, streaming and music. I am running pulseaudio. I am new to setting this audio up. The headphones work fine.

View 1 Replies View Related

Hardware :: NVIDIA GT Cards Not Detected By ALSA (running Slackware)?

Jan 9, 2011

I just replaced the ATI videocard by a NVIDIA GT430 videocard on my Slackware64 13.1 htpc and cant get the card to be detected by alsa so I have no sound through HDMI. Only the onboard devices are detected. Alsaconf does not see the card and the Kmix application does not see it either. Only lspci & cat /proc/asound/cards see it but seems not able to use it...I am using the stock slack64 13.1 kernel 2.6.33.4 and I've recompiled alsa from sources to version 1.0.23. What do I need to do to get this to work??aplay -l


Code:
**** List of PLAYBACK Hardware Devices ****
card 0: pcsp [pcsp], device 0: pcspeaker [pcsp]

[code]....

View 3 Replies View Related

CentOS 5 Hardware :: Sound Card Not Detected (nVidia Corporation MCP61)

Jun 13, 2010

how to detected sound card or drivers.when i am trying to detect sound card by using command system-config-soundcard it gives output on gui mode (Audio Configuration) but there is nothing show on PCM device. System Configuration which i am using.

#uname -a
Linux *** 2.6.18-8.el5 #1 SMP Thu Mar 15 19:46:53 EDT 2007 x86_64 x86_64 x86_64 GNU/Linux
#lspci
00:00.0 RAM memory: nVidia Corporation MCP61 Memory Controller (rev a1)

[code]....

View 3 Replies View Related

Debian Configuration :: Display Size Wrongly Detected After Installing NVIDIA Driver

May 17, 2010

Using squeeze with a GeForce4 MX 440 video card (NVIDIA) I have a monitor (4/3 aspect ratio, 1024x768 usually), and a TV connected via S-video After installing the NVIDIA driver using the NVIDIA binaries I managed to have a cloned twin screen configuration working.

However, the monitor is (wrongly) detected as having size 1824x768 (aspect ratio is widescreen) Using system monitor, I can set the correct size, but only for one session; besides, the login screen too is messed up the xorg.conf file seems right: proper resolution modes are set; xorg.0.log too

View 2 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved