What is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia?
Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.
What is the best place to get an updated nVidia video driver for CentOS 5.5? Is there a CentOS package available that will update it? Or is it best to download it directly from nVidia? Also, I do not have an internet connection on the machine, so it will have to be a manual download and installation.
View 1 Replies View RelatedI am running fedora 11 64bit version and just installed cedega to run a few games. I have Nvidia Geforce 9800M GTS 1GB graphics card. and installed my graphics drivers via: yum install kmod nvidia. i downloaded and installed the cedega application from the Cedega download
[Code]...
how do you install an nVidia video driver?
View 1 Replies View RelatedThe nouveau driver coming with the free fedora does not even allow to run Gnome 3, so I'd like to install the Nvidia driver. So far I did not succeed as the nouveau kernel module is loaded at an early stage. How can I remove the nouveau driver?
View 6 Replies View RelatedI'm using my Ubuntu 10.04 as a server, headless or with HDMI receiver/TV setup. There is a lot's of topics how to make it work headless/VNS. I found the least trouble is to make a fake VGA from old VGA cable and 3 resistors. However, when I start my Ubuntu with Fake VGA it won't switch to HDMI when I turn my Receiver/HDMI on. If I restart X it is fastest way to pick the HDMI Video/7.1 Audio up. I can do it via VNC or ssh and going to do it with 'irexec' so my wife will be able to redetect the HDMI and run XBMC with one button click of the remote.The problem is restarting X kills all my GUI apps (KTorrent, ...). Is there a way to force the video driver to restart or redetect the screens?
View 1 Replies View RelatedI just installed an nVidia driver for my Dell laptop running the latest flavor of Ubuntu (Lazy Lynx, or whatever it's up to). After it rebooted, the screen came up black. I have no video. How do I get rid of this driver and get my video back?
View 11 Replies View RelatedI have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5.
Code: Select all$nvidia-detect
Detected NVIDIA GPUs:
01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1)
Uh oh. Your card is not supported by any driver version up to 304.125.
A newer driver may add support for your card.
Newer driver releases may be available in backports.
[CODE]
New pooter, just installed SuSE 11.1. Would appreciate some insight into which Nvidia driver is right for my system, and what is the maximum resolution I can use without potentially causing any damage (if that's even a real concern).Here are the specifics.
[Code]...
So, now the questions.
a) Should I leave both sets of drivers installed, or should I delete one of them?
b) If delete, which should be taken off?
c) If neither of these drivers is the right one, which do you suggest I get instead?
d) I currently have the resolution set at 1920X1440. Is there any reason to worry that I might be overdriving anything and potentially causing damage to the system?
As of late I've been getting annoying video anomalies (see attachment) when using nvidias proprietary driver. I'm running ubuntu 11.04 64bit, my card is a 240 GTX and the nvidia driver version is 270.41.06.
View 1 Replies View RelatedI am try to install the nvidia 96.43.16 driver for a Gforce 2 MX-400 video card following this [URL].. When I ran the 'rpm -e --nodeps xorg-x11-Mesa-libGL' command the the package wasn't installed.
When I ran modprobe nvidia it wasn't found either.
Being a newbe I had no idea what to do next.
I am using Ubuntu 9.10 with a GeForce 7300SE/7200GS video card. The current driver installed is 185.18.36 - installed via Ubuntu when the OS was initially installed. It appears that Ubuntu is not automatically updating, or at least not informing me, when a new release is available. The latest version Nvidia driver is 190.53 released on Dec 16, 2009. I have manually downloaded the driver (NVIDIA-Linux-x86-190.53-pkg1.run). Since I'm still "wet behind the ears" to Linux-Ubuntu, I really do know that much, if anything, about using the "Terminal" and all those "command line" entries. So first, can I set-up Ubuntu to check for Nvidia driver updates? Next, how do I manually install this new driver?
View 5 Replies View RelatedI use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
View 5 Replies View RelatedI have the most bizarre problem that started with 10.04. Up until 10.04 I had zero problems with my setup. I am convinced this has something to do with NVIDIA 7100GS and 10.04.
Here is the problem in a nutshell. I have my home desktop, which I upgraded to 10.04 from 9.10. Everything went just fine except when it booted up and I logged in, the video "shut off", the computer "hung" for about 10 seconds, then came back. I'm able to use it for about 10 seconds then the same thing happens. Video blanks, system hangs, comes back.
I've tried turning off compiz, no effect. I've tried nvidia-current along with other versions (including the one from the website) and they ALL have the same problem. I know it's not a hardware issue as I can boot the live CD just fine. I also upgraded to 10.04.1 and that worked fine until I installed the nvidia drivers. Here is what I dont understand either. I did a apt-get remove --purge nvidia* and the problem still existed after that.
Something is seriously wonky. I REALLY don't want to re-install the entire box. Now, here is something else that doesnt make sense. I have 10.04 installed on my work box with a Nvidia 9800 graphics card and I have no issues at all.
I updated my fedora 12 GNOME installation. Now Compiz fusion is not working. It says Accelerated 3D support not found. Though Nvidia drivers are already installed. Now I can't even ALT+TAB between open applications.
I tried "metacity -- replace" but then windows wore a weird look with only a minimize button. No sign of maximise & close buttons.
I'm in the live CD right now trying to figure out what to do. When I first got into Ubuntu, it asked me to install nVidia drivers, so I did. Afterwards, it said I needed to restart my computer to finish installation, but when upon getting past the bootloader, my screen hangs on "Assuming drive cache: write through". I found this post: [URL] but the terminal commands didn't help and I can't find /etc/xorg.cfg even if I show hidden files. I've added a picture of the screen I get when I try to boot up, so maybe someone can tell me what to do to get back into Ubuntu. I would like to be able to get back without having to reinstall, if possible.
View 1 Replies View RelatedPrior to updating suse was running slow. The desktop would act "weird" . It started after an update on 11.3. thought updating to 11.4 would fix everything. Last night Dled a copy of Suse 11.4 burned, checked for errors and did an update. Everything worked fine and booted to desktop. Nice shiny and new, was very happy for about a minute
Currently I get a terminal login screen when trying to boot Desktop, or failsafe ( network doesn't work on either of these 2). Xen will boot to desktop but toolbar is gone. Hit alt f2 to launch apps ( terminal, firefox, yast) and none show on screen. If I hit alt tab they show up in list.
With zen I hit CTRL+ALT+f2 and did zypper up thinking that would fix the problem. Updated successfully but same problem. Have a Nvidia 7950GTX so I selected zen, did ctrl-alt-f2 again. Launched yast, added the nvidia.com 11.4 repo and installed the 68xx newer driver. ran nvidia-xconfig and still it wouldn't boot to GUI. loaded zen again c-a-f2 - > yast found a second nvidia 68xxnewer driver, installed and now have 6 options to select at startup. 2 desktop, 2 failsafe, 2 xen.
Picked the first one and suse loaded. Yay. Ran nvidia settings to fix resolution, saved. Weird thing was only 2 of the desktops backgrounds would change, other 2 were white. Audio didn't work, usually a reboot fixes the problem so I rebooted and am back to none working except the xen login that gives me a crippled desktop ( can launch programs but none show up).
At first startup after update to 11.4 desktop backgrounds were changing really fast. Right clicked desktop went to click on desktop settings and that's when the tool bar down below disappeared ( it was working prior to that). That is when the desktop became crippled. Second tool bar at top from previous install is still there and can launch folders to open but none show on screen but show in alt - tab.
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the
microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
How can I find video driver for nvidia geforce 320M graphics card for ubuntu 9.l0?
View 4 Replies View RelatedUnder Fedora 12, I have installed the proprietary NVIDIA graphics driver successfully and am now attempting to use the onboard HDMI output. (The board has HDMI and VGA out built in.) I am getting a clear picture on the TV screen, although the edge of the screen output hangs off all edges of the physical screen. The HDMI audio output is being detected, but no sound come out of the TV when I switch the sound output from the Analog Sterio Duplex to HDMI Output in the Sound Preferences. Any suggestions, and what further information is required?
View 9 Replies View Relatedi ran yum update which updated kernel to 2.6.31.9.174.fc12.i686.PAE. Now after logging in i get a blank white screen. With previous kernel updates i have had no such problem. Anyway, the boot messages are following:
Quote:
checking for module nvidia.ko [FAILED]
nvidia.ko for kernel 2.6.31.9-174.fc12.i686.PAE was not found [WARNING]
The nvidia driver will not be enabled until one is found [WARNING]
Driver already disabled
I have a GF 6600 video card.
I read somewhere that when updating Fedora I might want ttemporarily disable userdefined repos like RPMfusion.I tried that with
Code:
yum upgrade --disablerepo=rpmfusion-free-updates
It updated, I rebooted, and now my nvidia driver is not found.
[code]...
a little while ago the file from nv stopped being able to run.. I cant update the driver and now always get this error
4: warning: comparison between signed and unsigned integer expressions
/tmp/selfgz2718/NVIDIA-Linux-x86_64-260.19.12/kernel/nv.c: In function �nv
_kern_read_registry�:
[code]....
Lately I tried to update my nvidia drivers from RPFMFusion repos. There was a new version 275 available, so I installed it. After a reboot I would repeatedly see the Nviia Logo followed by black followed by a glimpse at the CLI with some error message. This process continues over and over again and it is so fast that the only thing I could make out from the error message is the following:
at-spi-bus-laun[some-number] segfault at 980 ...
in libx11.so.6.3.0 ...
I tried completely removing the driver then updating my system (there were no updates) then booting with nouveau to see that that actually works. Then I tried reinstalling the nvidia driver following leigh's guide [URL]. Same error.
This is where I'm stuck at the moment. Booting to runlevel 3 I had a look into the messages and Xorg.0.log, but I didn't see anything. Maybe I can get the log files uploaded.
I will boot from live media and provide them later on.
Hardware specs:
Samsung P480
Intel corei3 330
nvidia GT330M 1024mb
8gb Ram
120gb SSD OZC Vertex 2 with /tmp mounted as tmpfs
Software specs:
Using F15 x64
kernel 2.6.38.8-32 (from the top of my head, please don't shoot me)
added repos:
RPMFusion
adobe (flash)
playonlinux
There is one addition I can make. Before, when I was using the 270 driver, I tried playing some games via wine and that also segfaulted on me (most of the time - 1 worked), so I think there is a general issue with the nvidia drivers on my system. But back then It was only wine, not X.
This morning, I authorized an update as almost every day. I saw that the nvidia driver was on the list but in recent years, I no longer fear these driver updates since everything usually works well...
Except that this time, no! I turn on my pc this afternoon and more 3d effects. I run "Nvidia X Server Settings" which tells me I do not use the nvidia driver and must run as root the command "nvidia-xconfig," what I do. I restart X and no display at all, only the prompt in text mode!
I'm running Xubuntu 7 with the Intel 810E integrated graphics card. Seems to do these weird video effects. Does anyone know of a newer Linux driver for this card?
View 1 Replies View RelatedI went back to Suse 11.2, it comes with the 'nv' driver for my NVIDIA Quadro2 Pro (64 MB) and I'm getting some slow performance on browser display and sometimes video playing. Not always, I recently saw a 2 hr long movie on Blue Ray resolution, so the problem is not hardware, it's software. I saw several links here on how to install other drivers and a 1-click install link on this page but my question is, since this is an old card... which driver is the best for this card ?
View 9 Replies View RelatedWhile installing XBMC, which was working with my standard Ubuntu install, I accidentally installed NVidia hardware acceleration (sudo apt-get install libvdpau1 nvidia-185-libvdpau) on a notebook with ATI video.
Now XBMC does not work and says it requires OpenGL. apt-get remove does not work for that package because it's transitional. how I can get my stuff working like it was?
i just instaled bt4 on my hdd and i have a problem with instaling drivers... i cant find and install driver for my video card nvidia 8200 integrated on motherboard. exacly i got the problem with changeing video resolution... i have only 640x480 and 800x600, and here is the problem, i cant put it in 1024x768..
View 6 Replies View RelatedI have been running F11 for some time now. I install updates regularly and to this time have had no issues. Now it comes up with error.
Code:
[root@red 2305 ~]
$ yum update
Loaded plugins: protectbase, refresh-packagekit
0 packages excluded due to repository protections
Setting up Update Process
Resolving Dependencies
--> Running transaction check .....
--> xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-nvidia conflicts with xorg-x11-drv-catalyst
Error: xorg-x11-drv-catalyst conflicts with xorg-x11-drv-nvidia
You could try using --skip-broken to work around the problem
You could try running: package-cleanup --problems
package-cleanup --dupes
rpm -Va --nofiles --nodigest
[root@red 2306 ~]
I do not believe that I even have the 'xorg-x11-drv-catalyst' mentioned here installed:
Code:
[root@red 2315 ~]
$ yum list all | grep installed | grep catalyst
[root@red 2316 ~]
This returns nothing so why the error?
