Hardware :: Linux Slows Down Significantly At High Screen Resolution?

Jan 11, 2010

I'm running Ubuntu 9.10 on Athlon Barton 2600+ 2.2GHz, 1GB RAM and ATi Radeon X800 computer at 1600x1200 resolution with 2d (no compositing like Compiz).

Looking into the trouble of slow windows resizing I ended up with the observation that for 1280x1024 it's reasonably fast while at 1024x768 it's extremely fast. But 1600x1200 is my LCD's native resolution.

At 1600x1200 my computer is quite slowly responding, resizing windows or moving columns width makes it stumbling, you can see the action clearly does not go right with mouse, it's always late. KDE 4.x is way slower than Gnome.

I've tried many graphic cards (ATi, NVidia) with all possible drivers - open and proprietary, with or without 3d compositing.

Some graphic parameters:
GL_VERSION: 1.5 Mesa 7.6
GL_VENDOR: DRI R300 Project
GL_RENDERER: Mesa DRI R300 (R420 4A4A) 20090101 AGP 8x x86/MMX+/3DNow!+/SSE TCL

Glxgears gives ~4000fps with windowed mode and ~400fps at 1600x1200 maximized window. What is extremely amazing for me is that windowed mode takes 100% processor usage while 1600x200 maximized window (with window decorations) takes 30% of it, don't understand it.

Windows XP seems not to take care about 1600x1200 resolution, it's really fast.

Some more important devices from lspci:
$ lspci
00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1)
00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2)
00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1)
02:00.0 VGA compatible controller: ATI Technologies Inc R420 JJ [Radeon X800SE]

View 2 Replies


ADVERTISEMENT

Ubuntu Multimedia :: Cannot Get High Screen Resolution

Jul 31, 2011

I know this is probably a stupid question , but I started using Ubuntu 11.04 .

My screen resolution on windows was 1600x900

But on ubuntu (even after installing proprietary drivers) the highest I can get is 1024x768 .

I tried using xandr but couldn't work it out .

My xandr info

When i tried adding a new mode using the command

I got the following error

Now I'm not sure what VGA refers to , but Im using a vga port to connect my monitor

Also I'm using only one monitor.

View 9 Replies View Related

Ubuntu Installation :: Install Almost Worked But Screen Resolution Too High?

Dec 6, 2010

The installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.

The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:

xrandr: Failed to get size of gamma for output default
Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536.
default connected 2048x1536+0+0 0mm x 0mm

[code]....

View 9 Replies View Related

General :: Linux Shell Script .sh File Consumes High Memory?

Sep 8, 2010

I am having a php script which is used for bulk mailing. I run the script every minute through cron job. I have mentioned the path of the php script in a .sh file and execute the .sh file through cron job. Every time i run the script it utilizes high memory which results to server crash. how to restrict memory usage for that process to be a minimum one or how to set priority to be low for that process so that it is executed when there is no high priority jobs, so that the server runs normally without going down when the script runs

View 3 Replies View Related

OpenSUSE :: KDE On High Resolution Monitor ?

Dec 5, 2010

I have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:

1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use

2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case

3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs

4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel

View 2 Replies View Related

OpenSUSE :: How To Turn Up The High Resolution In 11.3

Dec 15, 2010

My screen resolution is only 640x480 after I installed the nVidia driver by authority method of 1-click install.

And then I run nvidia-xconfig,/etc/X11/xorg.conf was built.Restart my PC.

I selected the default mode to run opensuse.My screen was black.

So I select the failsafe mode and remove the /etc/X11/xorg.conf.

I try to copy my ubuntu 10.3 /etc/X11/xorg.conf,but I failed,the screen was black when booting default mode.

Now my LCD resolution is so low.

Graphics card:nVidia Geforce 5200
Monitor:19 inch widescreen LCD

And I can keep the best LCD resolution 1440x900@60Hz in the Windows XP successfully.

View 2 Replies View Related

Ubuntu :: K Menu Too High Resolution

Feb 24, 2010

I'm running Kubuntu 9.1 (KDE 4.4) on an IBM Thinkpad T30. By default K set my resolution to the highest output of my graphics card (ATI Mobility Radeon 7500) which I was able to change via xrandr at command line, however now the K menus and taskbar appear to be set at too high a resolution of their own to properly display. The K menu and taskbar appear pixelated and unreadable. Is there any way to change this or has Kubuntu likely just installed the wrong driver for my card?

View 8 Replies View Related

Ubuntu :: Screen Freezes On Suspend And Hdd Slows?

Jan 13, 2010

When ever I choose suspend to shutdown the hard drive slows and the picture on the screen freezes. The mouse and kb are disabled and the cpu fan keeps running. My hardware in in my sig below I have turned off automaitic updates straight after installing from disc as the last time I had it switched on after a few updates I got repeated ata drive read errors and the pc would freeze for a while being unable to read from the hdd. I have run wd diagnostics on the drive and it works fine. To fix this problem I did a clean install after messing round for 3 days and achieving nothing. I have an arch partition that works fine as well although I have not attempted to get suspend working with it. ( hal error) I have read a few thread on the net and tried entering the swap disks uuid into grub.

View 1 Replies View Related

Debian :: High Resolution Video Files

Sep 30, 2015

Debian 8.2 is installed to my Toshiba notebook. There is a performance issue about high resolution mp4 and mkv files. They are not played well on VLC or default media player.I don't see this issue on Windows. This computer has Intel HD Graphics 5500 and i7-5500U CPU.

View 2 Replies View Related

Fedora :: High Display Resolution For Rdesktop ?

Apr 17, 2011

I'm using rdesktop to remotely access a winxp box from F14. However I'm not getting high resolution. Please help me to get high resolution. The machine is at the same lan and no bandwidth problem here.

View 5 Replies View Related

Ubuntu :: Keep High Resolution - Resize Desktop ?

Jul 22, 2010

I have a 26 inch screen in my living room that supports 1920 x 1200 resolution. i would like to use that resolution, but I am not able to read the menu and see the icons because they are to small using standard values. How can I resize the desktop for beter readability?

View 1 Replies View Related

OpenSUSE Install :: Default Resolution Too High For Monitor ?

Sep 13, 2011

I have a problem with my screen resolution in Linux. This happens with both openSUSE 11.4 and Fedora 15. The moment my PC restarts after I have installed the operating system it will boot up with a screen resolution higher than my monitor supports. My screen supports a maximum resolution of 1600 x 1200 @ 75Hz and Linux sets the default resolution way too high at boot, now all I get is a message from my screen asking me very nicely to change the signal timings, but I can't because I can't see anything to change it to a lower value (I don't want it so high anyways because then everything is too **** small). My monitor is a SONY GDM-5410 and the Graphics card is an AMD Radeon HD 4870 1GB. It nly works when I boot the system to FailSafe mode, but then I can't cahnge it permanently.

View 1 Replies View Related

Ubuntu :: Streaming Videos Choppy With High Resolution

Mar 16, 2010

Pentium 4, 512MB RAM, GeForce2 MX/MX 400
When my machine ran Windows XP, I was able to watch full screen videos on Hulu, etc. with no problem. Now my machine is running Ubuntu (Koala). I'm using Firefox with the most recent Adobe Plugin (and I've made sure there are no other flash players installed). Streaming video (at low to medium resolution) is pretty choppy but still watchable most of the time. It is not watchable when played full screen or with high resolution. When I download the .flv file and play it through VLC, everything is smooth. Are there any tricks I can try to get the video running more smoothly, like it did before? (Disabling desktop effects made no difference.) Should I just get some more RAM? (I realize my RAM is low, but it didn't seem to effect my video watching before.)

View 1 Replies View Related

Ubuntu :: How To Get High Resolution Bootsplash When Cryptsetup Installed

Sep 12, 2010

I'm using an nvidia graphic card, as i read before on this forum, to get high resolution in bootsplash i need v86d package - and i installled it and i get back 1680x1050 resolution in bootslash. But the problem with resolution come back after installing cryptsetup package, now i've got 640x480 and i can change it, I trying to reconfigure v86d , plymount, trying update-initramfs -u but with no result.

View 4 Replies View Related

Ubuntu :: Whenever There Are Pictures On Screen In Firefox The Computer Slows Down To A Glacial Pace

May 29, 2011

I am currently running 11.04 on my laptop. Firefox is struggling to cope with images for some reason. Whenever there are pictures on screen in firefox the computer slows down to a glacial pace.

I tried clearing out the history and cookie files, and i have tried uninstalling and reinstalling FF but the problem still persists. I have tried other browsers that worked fine with images, but didn't find any that i really liked.

View 9 Replies View Related

General :: Debian - Use High Resolution (same As Desktop) In Virtual Consoles

Dec 6, 2010

I want to use 1920x1080 in the virtual consoles, with:

Debian Squeeze; proprierary ATI drivers.

Switching back to the open source drivers, it works automatically, but I got no clue with these ones. Someone say I should use uvesafb by modifing initramfs accordingly.

View 2 Replies View Related

Ubuntu Multimedia :: High Resolution Fonts / Icons Too Small?

May 14, 2010

I hooked up Lucid to a 50" and adjusted the resolution to the max. Gives a clearer sharper picture but all the displayed items are tiny. Is there something I need to do that I haven't? I went from 1086x720 to 1400(approx)x900(approx) and created the problem. Now I'm back at 1086x720. I'm using the Nvidia 195 drivers.

View 2 Replies View Related

Ubuntu :: 9.10 - Console Resolution High And Font Size Small

Jan 3, 2010

I am have upgraded from 9.04 to 9.10 in my laptop. After performing the reboot, the shell/console resolution went very high and the font size went too small. How to regain the old console shell resolution as in 9.04. I require this urgently as my laptop suffers the white screen problem. Switching between Ctrl+Alt+F6 and Ctrl+Alt+F7 I could get back the screen as the change in the resolution switches off and on the screen, so that I can negotiate with the white screen problem.

View 10 Replies View Related

Programming :: Calculations - High Resolution Mandelbrot - Working Code

Feb 25, 2010

I am piecing a Mandelbrot generator up, I have one working to produce a 1,500 x 1,500 picture (which is fairly accurate).

I would like to increase the resolution over 100,000 x 100,000 + (into the millions x millions).

How I can achieve this? What kind of buffer sizes do I need?

(note this code doesnt have any memory allocations yet)

Here is my code so far:

The program outputs the Mandelbrot as a .tga file. I calculated the image on fixed axis of -2 to 2 (on the x and y axis). Image produced: [url]

View 12 Replies View Related

Ubuntu Multimedia :: When Go To Full Screen Mode, The Digital Image Slows And Get Blocky?

Jan 13, 2011

I got a nice Christmas gift, a Westinghouse 42" TV/Monitor, and it works great with Ubuntu 10.10. The one problem I have is watching Hulu movies on it. When I go to full screen mode, the digital image slows and get blocky. When I check the settings, it is telling me I have a 32" not a 42" and there is no way to change it. It does tell me I have a Westinghouse. I also have a Roku and I believe it has a Linux OS on it and it works great

View 4 Replies View Related

Fedora :: Play High Resolution Videos - Appears To Slow Then Becomes Choppy

May 2, 2010

I'm having issues playing HD videos ( some with 720p level, much more apparent with 1080p level one) The video appears to slow then becomes choppy, becoming de synced from the audio that carries on as normal. This occurs with both VLC player and XBMC, though the latter is better. My specs: Fedora 12 3.2 Ghz P4 processor 1Gig ram Radeon 9800 xt gfx card (I couldn't get the 9.3 ati driver to work)

View 2 Replies View Related

General :: X-Window Modeline For High Resolution Modes On NEC LCD 22WV Monitor?

Apr 30, 2010

What should look like X Window System (X.Org) modeline to be put in xorg.conf, for high resolution (incuding recommended 1680x1050 @ 50Hz resolution) for 22" NEC LCD 22WV monitor? X.Org autodetect correctly only 800x600 and lower resolution SVGA modes,unfortunately.1,2

How can I generate proper "Modeline" line for xorg.conf? Is information included in NEC_Datasheet_LCD22WV-english.pdf enough (found on NEC LCD 22WV product info page)? What tools there are available to generate proper modeline for a LCD monitor for Linux? MS Windows (MS Windows XP Home) correctly detects and use 1680x1050 resolution; can I somehow get modeline information from MS Windows?

Footnotes:

1) It might be hardware problem with the monitor itself, as the same LiveCD Linux distribution that couldn't autodetect recommended 1680x1050 mode for NEC LCD 22WV monitor, correctly autodetects recommended 1440x900 mode for slightly smaller NEC LCD 19WV monitor from the same family, by the same producent.

2) Or it might be problem with graphics card (NVIDIA Riva TNT2 M64) not supporting such resolution, or with graphics driver not supporting such resolution.

View 2 Replies View Related

Ubuntu :: Mouse Cursor Doesn't Display After Login With High Resolution / Fix It?

Aug 12, 2010

Version: Ubuntu 10.04 Desktop

Problem:
When I change the resolution higher (e.g. 1920x1080),
mouse cursor disappear, until I open the terminal / Ctrl+Alt+F1 (~F6), or run other applications.
But the main problem is, every time after login, the cursor will disappear
(as I know that, before the login, the resolution is 800x600 60Hz, after login, the resolution will be adjusted according to the setting)
So, anyone know how to fix this problem?

I have searched many related posts before,
some of them told me to upgrade the driver, but it didn't help and become worse (cannot boot up, need to re-install ubuntu)
and some of them told me to modify the xorg file, it didn't help, too. (as xorg.conf doesn't exist and I have tried to create one to do the modification, but didn't help)
Any other solution?

View 5 Replies View Related

Debian :: Can't Get High Resolution With Vesa Xorg Driver (Intel 82845)

Feb 20, 2011

With the upgrade to Squeeze and the 2.6.32-5-686 kernel, my Dell GX260's 82845 video chip suffers from the documented intel driver bug (freezes within a few minutes). I tried to fall back to the vesa driver, but am only able to get 640x480 resolution. The monitor is an LG L1720P.

I turned off kernel mode setting (via /etc/modprobe.d/i915-kms.conf), and modified xorg.conf -- added Modeline entries (from gtf) and
additional Mode lines to try to force resolution. Relevant portions of xorg.conf, dmesg and Xorg.0.log are shown below.

xorg.conf:

Code:

Section "Device"
Identifier "Generic Video Card"
Driver "vesa"

[code]....

View 6 Replies View Related

Ubuntu Installation :: RV710 Chip - HD 4550 - And High Resolution On Dell U2711 In 10.10 ?

Oct 13, 2010

I asked around about in the now closed thread: [url]

For about half a year ago, is not present in 10.10. That is I can now use the Dell U2711 monitor at its full resolution, using a Radeon HD 4550 (RV710) card, with acceleration and without the image beeing distorted, using the open xorg radeon driver.

View 4 Replies View Related

Hardware :: Set Top Box Resolution Through Linux Command?

Feb 20, 2010

Currently i am working on linux os to run picture files like .png and .jpg on LCD monitor through set top box. is there any way to find h/w configuration and set h/w resolution to what i want.

View 1 Replies View Related

Ubuntu Multimedia :: NVidia GT 240 Card - Unable To Get High Resolution - Colour Or 3-D Acceleration Working With 8.04 Hardy

Aug 2, 2010

Unable to get high res, colour or 3-D acceleration working with 8.04 Hardy. Not a hardware problem as it works perfectly in dual-boot XP.

[Code]...

View 6 Replies View Related

Hardware :: High-resolution Video With 2 MB Graphics Card- Play 480p Video ?

Jun 24, 2010

I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.

The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"

As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...

Some other suspicious-looking lines from the log file:

View 3 Replies View Related

Ubuntu :: Significantly Slow File Transfers On 10.10

May 25, 2011

Has anyone else noticed that file transfers on Maverick are significantly slower than on Lucid? A review of Maverick on Tom's Hardware finds that it is considerably slower. My own test says: On 10.10, file copy between two NTFS drives maxes at 30 MBytes/s; on 10.04.1, the same operations clock in at 40 MBytes/s. Both drives are capable of rw speeds of 70-90 MBytes/s, which I got on WinXP, and hdparm's cached read results back that up. Any ideas why file transfers are so slow, and especially why Maverick is even slower than Lucid?

View 9 Replies View Related

Ubuntu :: Half Gnome-panel In Gnome 2.3 And High Resolution?

May 12, 2010

I've installed Ubuntu 10.4 and the gnome-panel appears half, as you can see in the attached picture, if I try resolutions over 1024x768.If I kill the gnome-panel and it restarts, or if I change its properties, it became OK, but in startup it appears like the image.I've tried other Gnome 2.3 based distributions and occurs the same issue. With Gnome 2.28 it doesn't occurs. Then ii seems a gnome 2.3 problem.

PD: My grafic card is a Matrox G550.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved