I'm running Kubuntu 9.1 (KDE 4.4) on an IBM Thinkpad T30. By default K set my resolution to the highest output of my graphics card (ATI Mobility Radeon 7500) which I was able to change via xrandr at command line, however now the K menus and taskbar appear to be set at too high a resolution of their own to properly display. The K menu and taskbar appear pixelated and unreadable. Is there any way to change this or has Kubuntu likely just installed the wrong driver for my card?
I have a 26 inch screen in my living room that supports 1920 x 1200 resolution. i would like to use that resolution, but I am not able to read the menu and see the icons because they are to small using standard values. How can I resize the desktop for beter readability?
I have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:
1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use
2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case
3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs
4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel
Pentium 4, 512MB RAM, GeForce2 MX/MX 400 When my machine ran Windows XP, I was able to watch full screen videos on Hulu, etc. with no problem. Now my machine is running Ubuntu (Koala). I'm using Firefox with the most recent Adobe Plugin (and I've made sure there are no other flash players installed). Streaming video (at low to medium resolution) is pretty choppy but still watchable most of the time. It is not watchable when played full screen or with high resolution. When I download the .flv file and play it through VLC, everything is smooth. Are there any tricks I can try to get the video running more smoothly, like it did before? (Disabling desktop effects made no difference.) Should I just get some more RAM? (I realize my RAM is low, but it didn't seem to effect my video watching before.)
I'm using an nvidia graphic card, as i read before on this forum, to get high resolution in bootsplash i need v86d package - and i installled it and i get back 1680x1050 resolution in bootslash. But the problem with resolution come back after installing cryptsetup package, now i've got 640x480 and i can change it, I trying to reconfigure v86d , plymount, trying update-initramfs -u but with no result.
Debian 8.2 is installed to my Toshiba notebook. There is a performance issue about high resolution mp4 and mkv files. They are not played well on VLC or default media player.I don't see this issue on Windows. This computer has Intel HD Graphics 5500 and i7-5500U CPU.
I'm using rdesktop to remotely access a winxp box from F14. However I'm not getting high resolution. Please help me to get high resolution. The machine is at the same lan and no bandwidth problem here.
I hooked up Lucid to a 50" and adjusted the resolution to the max. Gives a clearer sharper picture but all the displayed items are tiny. Is there something I need to do that I haven't? I went from 1086x720 to 1400(approx)x900(approx) and created the problem. Now I'm back at 1086x720. I'm using the Nvidia 195 drivers.
The installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.
The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:
xrandr: Failed to get size of gamma for output default Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536. default connected 2048x1536+0+0 0mm x 0mm
I am have upgraded from 9.04 to 9.10 in my laptop. After performing the reboot, the shell/console resolution went very high and the font size went too small. How to regain the old console shell resolution as in 9.04. I require this urgently as my laptop suffers the white screen problem. Switching between Ctrl+Alt+F6 and Ctrl+Alt+F7 I could get back the screen as the change in the resolution switches off and on the screen, so that I can negotiate with the white screen problem.
Problem: When I change the resolution higher (e.g. 1920x1080), mouse cursor disappear, until I open the terminal / Ctrl+Alt+F1 (~F6), or run other applications. But the main problem is, every time after login, the cursor will disappear (as I know that, before the login, the resolution is 800x600 60Hz, after login, the resolution will be adjusted according to the setting) So, anyone know how to fix this problem?
I have searched many related posts before, some of them told me to upgrade the driver, but it didn't help and become worse (cannot boot up, need to re-install ubuntu) and some of them told me to modify the xorg file, it didn't help, too. (as xorg.conf doesn't exist and I have tried to create one to do the modification, but didn't help) Any other solution?
I have a problem with my screen resolution in Linux. This happens with both openSUSE 11.4 and Fedora 15. The moment my PC restarts after I have installed the operating system it will boot up with a screen resolution higher than my monitor supports. My screen supports a maximum resolution of 1600 x 1200 @ 75Hz and Linux sets the default resolution way too high at boot, now all I get is a message from my screen asking me very nicely to change the signal timings, but I can't because I can't see anything to change it to a lower value (I don't want it so high anyways because then everything is too **** small). My monitor is a SONY GDM-5410 and the Graphics card is an AMD Radeon HD 4870 1GB. It nly works when I boot the system to FailSafe mode, but then I can't cahnge it permanently.
I asked around about in the now closed thread: [url]
For about half a year ago, is not present in 10.10. That is I can now use the Dell U2711 monitor at its full resolution, using a Radeon HD 4550 (RV710) card, with acceleration and without the image beeing distorted, using the open xorg radeon driver.
I want to use 1920x1080 in the virtual consoles, with:
Debian Squeeze; proprierary ATI drivers.
Switching back to the open source drivers, it works automatically, but I got no clue with these ones. Someone say I should use uvesafb by modifing initramfs accordingly.
I'm running Ubuntu 9.10 on Athlon Barton 2600+ 2.2GHz, 1GB RAM and ATi Radeon X800 computer at 1600x1200 resolution with 2d (no compositing like Compiz).
Looking into the trouble of slow windows resizing I ended up with the observation that for 1280x1024 it's reasonably fast while at 1024x768 it's extremely fast. But 1600x1200 is my LCD's native resolution.
At 1600x1200 my computer is quite slowly responding, resizing windows or moving columns width makes it stumbling, you can see the action clearly does not go right with mouse, it's always late. KDE 4.x is way slower than Gnome.
I've tried many graphic cards (ATi, NVidia) with all possible drivers - open and proprietary, with or without 3d compositing.
Glxgears gives ~4000fps with windowed mode and ~400fps at 1600x1200 maximized window. What is extremely amazing for me is that windowed mode takes 100% processor usage while 1600x200 maximized window (with window decorations) takes 30% of it, don't understand it.
Windows XP seems not to take care about 1600x1200 resolution, it's really fast.
Some more important devices from lspci: $ lspci 00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1) 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 02:00.0 VGA compatible controller: ATI Technologies Inc R420 JJ [Radeon X800SE]
I'm having issues playing HD videos ( some with 720p level, much more apparent with 1080p level one) The video appears to slow then becomes choppy, becoming de synced from the audio that carries on as normal. This occurs with both VLC player and XBMC, though the latter is better. My specs: Fedora 12 3.2 Ghz P4 processor 1Gig ram Radeon 9800 xt gfx card (I couldn't get the 9.3 ati driver to work)
What should look like X Window System (X.Org) modeline to be put in xorg.conf, for high resolution (incuding recommended 1680x1050 @ 50Hz resolution) for 22" NEC LCD 22WV monitor? X.Org autodetect correctly only 800x600 and lower resolution SVGA modes,unfortunately.1,2
How can I generate proper "Modeline" line for xorg.conf? Is information included in NEC_Datasheet_LCD22WV-english.pdf enough (found on NEC LCD 22WV product info page)? What tools there are available to generate proper modeline for a LCD monitor for Linux? MS Windows (MS Windows XP Home) correctly detects and use 1680x1050 resolution; can I somehow get modeline information from MS Windows?
Footnotes:
1) It might be hardware problem with the monitor itself, as the same LiveCD Linux distribution that couldn't autodetect recommended 1680x1050 mode for NEC LCD 22WV monitor, correctly autodetects recommended 1440x900 mode for slightly smaller NEC LCD 19WV monitor from the same family, by the same producent.
2) Or it might be problem with graphics card (NVIDIA Riva TNT2 M64) not supporting such resolution, or with graphics driver not supporting such resolution.
With the upgrade to Squeeze and the 2.6.32-5-686 kernel, my Dell GX260's 82845 video chip suffers from the documented intel driver bug (freezes within a few minutes). I tried to fall back to the vesa driver, but am only able to get 640x480 resolution. The monitor is an LG L1720P.
I turned off kernel mode setting (via /etc/modprobe.d/i915-kms.conf), and modified xorg.conf -- added Modeline entries (from gtf) and additional Mode lines to try to force resolution. Relevant portions of xorg.conf, dmesg and Xorg.0.log are shown below.
xorg.conf:
Code:
Section "Device" Identifier "Generic Video Card" Driver "vesa"
I've installed Ubuntu 10.4 and the gnome-panel appears half, as you can see in the attached picture, if I try resolutions over 1024x768.If I kill the gnome-panel and it restarts, or if I change its properties, it became OK, but in startup it appears like the image.I've tried other Gnome 2.3 based distributions and occurs the same issue. With Gnome 2.28 it doesn't occurs. Then ii seems a gnome 2.3 problem.
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
I'm using lucid x86_64. I tried changing the grub menu resolution and it works fine on 1024x786 and 1280x1024 but since my monitor is a widescreen lcd i tried the native resolution which is 1440x900 which gives a message "Frequency out of range" during boot after bios post. but then after 10 secs ubuntu boots w/o any problems...also I get the same problem with 1280x800 so i'm guessing it doesn't support wide screen resolutions...is there a workaround?
I have followed this post: http://ubuntuforums.org/showthread.p...lay+resolution And when I restart it goes back to having the edge of my window (scrollbar) cut off. I added the increase_resolution.sh to my startup menu but I guess I don't know the command to MAKE it start at startup. (That is what "command" means in the "Edit startup program" menu, correct?) If I go into usr/local/bin and click run it works, but if I can execute it automatically, that would be great.
Also, I have added an account(?) for my daughter and when she is finished and I try to log her out the display goes nuts and does not correct itself. I assume it has to do with this since when I restart the machine (and the script isn't running) the picture is fine again. Is there a conflict between the two accounts and this script? I'm sorry if this is not making sense, I know what I want to say, but don't have the lingo/jargon down.
I recently reinstalled Ubuntu 10.04. Since I did that I have had a problem with GRUB: I cannot see the Recovery Mode menu - at least not anything intelligible.
I can see the normal first GRUB menu with all installed operating systems, recovery modes, and MEMTEST, etc, but cannot see the Recovery Mode menu. What I do notice (if I select it) are some fuzzy lines at the top of the screen. I also notice the Ubuntu splash screen does not appear any more either.
Clearly it seems there is a resolution issue. I have a 1440 x 900 monitor and the current version NVIDIA driver.
This happened some time ago on previous Ubuntu releases, but was not an issue when I originally installed 10.04.
Attempted Fix:I installed the StartUp-Manager and have tried all the resolution combinations with no success. Some yield bigger more centrally displayed fuzzy lines, but still nothing legible.
Although this isn't "life-threatening" I'm just a bit worried that I might need the Recovery Menu and not be able to use it.
I was wanting to use StartUp-Manager to increase the resolution of the GRUB menu and the boot logo screen. Changing the resolution for the GRUB menu works fine. But the Ubuntu logo that should show up during the boot process is all scrambled across the screen. I tried multiple resolutions to fix it and none of them work. How do I restore everything back to their defaults? I tried putting the numbers all back to where they where when I first ran StartUp-Manager but that didn't fix it.
I have a dual boot system with Windows 7 and Ubuntu 10.10. I want to make my grub menu look good and have set a beautiful background image to it and set the resolution so it fits the screen. Is it any way to resize the actual menu to make it smaller without shrinking the background picture?
I booted Hardy, because Karmic detects no screen, after trying to adjust to a previously recognized resolution. As good as it is, does it seem like some basic computer functions just do NOT improve?
