Ubuntu :: How To Get High Resolution Bootsplash When Cryptsetup Installed
Sep 12, 2010
I'm using an nvidia graphic card, as i read before on this forum, to get high resolution in bootsplash i need v86d package - and i installled it and i get back 1680x1050 resolution in bootslash. But the problem with resolution come back after installing cryptsetup package, now i've got 640x480 and i can change it, I trying to reconfigure v86d , plymount, trying update-initramfs -u but with no result.
I recently installed Ubuntu 10.04, and after I rebooted to finish installing my Nvidia drivers, the bootsplash reset itself to a resolution of 800x600. Is there any way to change it back to 1680x1050?
I'm running Kubuntu 9.1 (KDE 4.4) on an IBM Thinkpad T30. By default K set my resolution to the highest output of my graphics card (ATI Mobility Radeon 7500) which I was able to change via xrandr at command line, however now the K menus and taskbar appear to be set at too high a resolution of their own to properly display. The K menu and taskbar appear pixelated and unreadable. Is there any way to change this or has Kubuntu likely just installed the wrong driver for my card?
I have a 26 inch screen in my living room that supports 1920 x 1200 resolution. i would like to use that resolution, but I am not able to read the menu and see the icons because they are to small using standard values. How can I resize the desktop for beter readability?
I have a dell latitude with intel i7 nvidia NVS 3100M and screen 1920x1080 resolution, using KDE 4.4 stable suse, well with high resolution monitor I found some problem usng kde:
1- I can change the font dimension by system settings but if I bigger the font the dimension of Kmunu doesn't change so the result is big font in small container, ugly and difficult to use
2- I can change the font dimensions in KDM splashscreen but the window where username and password is shown doesn't change, result is big unreadeable font in a small case
3- I cannot change the tabs and theyr font dimensions in chromium and firefox, result very small tabs
4- Icons in system tray and Kmenu and other icons remains always small even if I bigger the panel
Pentium 4, 512MB RAM, GeForce2 MX/MX 400 When my machine ran Windows XP, I was able to watch full screen videos on Hulu, etc. with no problem. Now my machine is running Ubuntu (Koala). I'm using Firefox with the most recent Adobe Plugin (and I've made sure there are no other flash players installed). Streaming video (at low to medium resolution) is pretty choppy but still watchable most of the time. It is not watchable when played full screen or with high resolution. When I download the .flv file and play it through VLC, everything is smooth. Are there any tricks I can try to get the video running more smoothly, like it did before? (Disabling desktop effects made no difference.) Should I just get some more RAM? (I realize my RAM is low, but it didn't seem to effect my video watching before.)
Debian 8.2 is installed to my Toshiba notebook. There is a performance issue about high resolution mp4 and mkv files. They are not played well on VLC or default media player.I don't see this issue on Windows. This computer has Intel HD Graphics 5500 and i7-5500U CPU.
I'm using rdesktop to remotely access a winxp box from F14. However I'm not getting high resolution. Please help me to get high resolution. The machine is at the same lan and no bandwidth problem here.
I hooked up Lucid to a 50" and adjusted the resolution to the max. Gives a clearer sharper picture but all the displayed items are tiny. Is there something I need to do that I haven't? I went from 1086x720 to 1400(approx)x900(approx) and created the problem. Now I'm back at 1086x720. I'm using the Nvidia 195 drivers.
The installation went okay (to start with) on my newly formatted hard drive (after death of Windows XP), but I got an error about 3/4 of the way through. The system said something about starting the desktop to try to resolve or fault find the problem. So I now have a desktop with access to all the menu system. I am feeling my way around slowly getting used to the environment. I think there are bits missing from the install but with no frame of reference I cannot tell what exactly is wrong. One obvious problem is my Monitor screen resolution. In Monitor preferences it is set as 'unknown monitor'.
The detect monitor button does nothing and the resolution is set as 2048 x 1536 which is just too small to see properly on the screen. I am currently using zoom to increase within a window to use at all. I have tried opening a terminal and using the xrandr command which reports the following:
xrandr: Failed to get size of gamma for output default Screen 0: minimum 2048 x 1536, current 2048 x 1536, maximum 2048 x 1536. default connected 2048x1536+0+0 0mm x 0mm
I am have upgraded from 9.04 to 9.10 in my laptop. After performing the reboot, the shell/console resolution went very high and the font size went too small. How to regain the old console shell resolution as in 9.04. I require this urgently as my laptop suffers the white screen problem. Switching between Ctrl+Alt+F6 and Ctrl+Alt+F7 I could get back the screen as the change in the resolution switches off and on the screen, so that I can negotiate with the white screen problem.
Problem: When I change the resolution higher (e.g. 1920x1080), mouse cursor disappear, until I open the terminal / Ctrl+Alt+F1 (~F6), or run other applications. But the main problem is, every time after login, the cursor will disappear (as I know that, before the login, the resolution is 800x600 60Hz, after login, the resolution will be adjusted according to the setting) So, anyone know how to fix this problem?
I have searched many related posts before, some of them told me to upgrade the driver, but it didn't help and become worse (cannot boot up, need to re-install ubuntu) and some of them told me to modify the xorg file, it didn't help, too. (as xorg.conf doesn't exist and I have tried to create one to do the modification, but didn't help) Any other solution?
I have a problem with my screen resolution in Linux. This happens with both openSUSE 11.4 and Fedora 15. The moment my PC restarts after I have installed the operating system it will boot up with a screen resolution higher than my monitor supports. My screen supports a maximum resolution of 1600 x 1200 @ 75Hz and Linux sets the default resolution way too high at boot, now all I get is a message from my screen asking me very nicely to change the signal timings, but I can't because I can't see anything to change it to a lower value (I don't want it so high anyways because then everything is too **** small). My monitor is a SONY GDM-5410 and the Graphics card is an AMD Radeon HD 4870 1GB. It nly works when I boot the system to FailSafe mode, but then I can't cahnge it permanently.
I asked around about in the now closed thread: [url]
For about half a year ago, is not present in 10.10. That is I can now use the Dell U2711 monitor at its full resolution, using a Radeon HD 4550 (RV710) card, with acceleration and without the image beeing distorted, using the open xorg radeon driver.
I want to use 1920x1080 in the virtual consoles, with:
Debian Squeeze; proprierary ATI drivers.
Switching back to the open source drivers, it works automatically, but I got no clue with these ones. Someone say I should use uvesafb by modifing initramfs accordingly.
I'm running Ubuntu 9.10 on Athlon Barton 2600+ 2.2GHz, 1GB RAM and ATi Radeon X800 computer at 1600x1200 resolution with 2d (no compositing like Compiz).
Looking into the trouble of slow windows resizing I ended up with the observation that for 1280x1024 it's reasonably fast while at 1024x768 it's extremely fast. But 1600x1200 is my LCD's native resolution.
At 1600x1200 my computer is quite slowly responding, resizing windows or moving columns width makes it stumbling, you can see the action clearly does not go right with mouse, it's always late. KDE 4.x is way slower than Gnome.
I've tried many graphic cards (ATi, NVidia) with all possible drivers - open and proprietary, with or without 3d compositing.
Glxgears gives ~4000fps with windowed mode and ~400fps at 1600x1200 maximized window. What is extremely amazing for me is that windowed mode takes 100% processor usage while 1600x200 maximized window (with window decorations) takes 30% of it, don't understand it.
Windows XP seems not to take care about 1600x1200 resolution, it's really fast.
Some more important devices from lspci: $ lspci 00:00.0 Host bridge: nVidia Corporation nForce2 IGP2 (rev c1) 00:01.1 SMBus: nVidia Corporation nForce2 SMBus (MCP) (rev a2) 00:1e.0 PCI bridge: nVidia Corporation nForce2 AGP (rev c1) 02:00.0 VGA compatible controller: ATI Technologies Inc R420 JJ [Radeon X800SE]
I'm having issues playing HD videos ( some with 720p level, much more apparent with 1080p level one) The video appears to slow then becomes choppy, becoming de synced from the audio that carries on as normal. This occurs with both VLC player and XBMC, though the latter is better. My specs: Fedora 12 3.2 Ghz P4 processor 1Gig ram Radeon 9800 xt gfx card (I couldn't get the 9.3 ati driver to work)
What should look like X Window System (X.Org) modeline to be put in xorg.conf, for high resolution (incuding recommended 1680x1050 @ 50Hz resolution) for 22" NEC LCD 22WV monitor? X.Org autodetect correctly only 800x600 and lower resolution SVGA modes,unfortunately.1,2
How can I generate proper "Modeline" line for xorg.conf? Is information included in NEC_Datasheet_LCD22WV-english.pdf enough (found on NEC LCD 22WV product info page)? What tools there are available to generate proper modeline for a LCD monitor for Linux? MS Windows (MS Windows XP Home) correctly detects and use 1680x1050 resolution; can I somehow get modeline information from MS Windows?
Footnotes:
1) It might be hardware problem with the monitor itself, as the same LiveCD Linux distribution that couldn't autodetect recommended 1680x1050 mode for NEC LCD 22WV monitor, correctly autodetects recommended 1440x900 mode for slightly smaller NEC LCD 19WV monitor from the same family, by the same producent.
2) Or it might be problem with graphics card (NVIDIA Riva TNT2 M64) not supporting such resolution, or with graphics driver not supporting such resolution.
With the upgrade to Squeeze and the 2.6.32-5-686 kernel, my Dell GX260's 82845 video chip suffers from the documented intel driver bug (freezes within a few minutes). I tried to fall back to the vesa driver, but am only able to get 640x480 resolution. The monitor is an LG L1720P.
I turned off kernel mode setting (via /etc/modprobe.d/i915-kms.conf), and modified xorg.conf -- added Modeline entries (from gtf) and additional Mode lines to try to force resolution. Relevant portions of xorg.conf, dmesg and Xorg.0.log are shown below.
xorg.conf:
Code:
Section "Device" Identifier "Generic Video Card" Driver "vesa"
I've installed Ubuntu 10.4 and the gnome-panel appears half, as you can see in the attached picture, if I try resolutions over 1024x768.If I kill the gnome-panel and it restarts, or if I change its properties, it became OK, but in startup it appears like the image.I've tried other Gnome 2.3 based distributions and occurs the same issue. With Gnome 2.28 it doesn't occurs. Then ii seems a gnome 2.3 problem.
Yesterday I installed a new server with a large partition for my XEN images. This partition is a about 930GB. The installation tooks ages and after he finished I was finding out why that is. The SoftRAID1 I configured is rebuilding the large partition.
I've been playing around with Damn Small Linux 4.4.10 on my Dell Inspiron 3000 laptop for quite a while now, and this is the first time I've been downright stumped. To make a long story short, I'm trying to play 480p video on a machine with a 233 MHz Pentium processor, 112 MB of ram, and a Neomagic MagicGraph 128XD graphics card (NM2160). Crazy? Maybe, but I don't think so. I'm using MPlayer set to Xv mode with the XFree86 4.3.0 server, and so far, I've been able to get it to play 360p mpegs with minimal stuttering. However, MPlayer crashes with 480p. This is because the 128XD only has 2 MB of memory, which, after the 1024x768x16 screen takes its share, doesn't leave enough room for a 640x480 overlay.
The creators of MPlayer are aware of this limitation, and suggest adding the following line to my XF86Config file: Option "OverlayMem" "829440"
As I understand it, this is supposed to extend the video card's frame buffer into system memory, thus allowing the higher resolution video to play. However, it doesn't work, based on this output from my XFree86 log file: cannot reserve 829440 bytes for overlay...
Some other suspicious-looking lines from the log file:
I have 10 hotswappable SATA drives I use for a rotating backup system. On each drive I have created an encrypted LUKS partition. I normally mount the drive by first unlocking it via:
Code:
cryptsetup luksOpen /dev/sdc1: BD-4-B
However some time last week this command refused to work...for any of the drive. Before I even get prompted for a password I get the terse error message: "Command failed: Can not access device"I can't recall if it was a system update that broke it, but now I can't get to any of the data on these devices nor can I run any backups.
i have a cryptsetup container, which after freshly setting up the computer isn't mountable anymore. Google didnt help me much soSince i use a keyfile, it cant be the passphrase.This is what i do:Quote:
losetup /dev/loop0 /home/data.img cryptsetup -d super-secret-key.file data /dev/loop0 mount /dev/mapper/data /data
I setup a luks encrypted /home partition on my Debian jessie, with an automount when my usb key containing the luks secret is plugged in at startup.
I did configure /etc/fstab so that my usb key be mounted at startup to /media/usb1, and /etc/crypttab to open my encrypted partition with the key at /media/usb1/homekey. It works.
However, when my usb key is not plugged in, boot fails and never shows welcome screen. I would change this behaviour so that when my usb is missing, boot resumes and do not mount /home partition. How could I manage this?
I have a 1 TB usb external disk. I was crypted it with cryptsetup. now I dont' want crypt. without losing data how can I clear dmcrypt from my external disk