Hardware :: Intel D945GCPE Doesn't Boot Fresh Installation?
May 25, 2010
My Intel D945GCPE doesn't boot fresh installation of Linux after "under Warranty Replacement" of it. I have tried to install Fedora 9,10, RHEL 5, Zenwalk on dual boot with windows Xp. i.e. First Win XP then Linux.
The Linux Install perfectly but when i reboot after the installation, BIOS tries to detect PXE boot. I have both custom partitioning scheme and Auto-Partitioning on Free unpartitioned space. I have tried this 5 times with the aforesaid distributions, but failure!
In fact I have done the same number of times even earlier but before Board Replacement. Board works perfectly with Win Xp, and 2008 Server.
System Configuration:
Core2Duo 2.2
2 GB RAM
Intel D945GCPE MotherBoard (Replaced)
View 3 Replies
ADVERTISEMENT
May 4, 2015
I recently finished a mini-itx machine and everything was working great with a fresh Jessie install. I put in a PCIe wifi card and now the computer won't boot. The power LED is on, the PSU fan is spinning, but I get no display output at all and I don't know how far into the boot process the thing even got. I removed the card and the machine boots fine again.
I only have one PCIe slot so it is my only option, I don't have another PCIe card to try, nor do I have another machine to test the wifi card in. The card is brand new, for what it's worth.
WiFi card: [URL] ....
motherboard: [URL] .....
View 1 Replies
View Related
Jul 31, 2009
I just downloaded the F11 x64 DVD iso, and I when I try to install it, after the media check screen, Anaconda starts it load, but it says "X failed to start, falling back to text mode" (or something like that).
The install goes through (in text mode), and all that gets installed is the basic environment.
My specs:
- AMD X2 Phenom II 550 Callisto
- 4gb DDR2 800 memory
- 1tb Samsung SATA / 100gb Western Digital SATA
- 2x XFX Geforce 9600gt 1gb
- ASRock K10N780SLIX3-WIFI motherboard
I've tried Ubuntu x86 on the same system, but I was having issues with it, so I decided to try FC11 instead.
View 7 Replies
View Related
Oct 25, 2010
I'm trying to install Ubuntu 10.10 from a USB stick but neither the install nor the LiveCD will recognise my Hard Disk Drive. They only recognise the USB stick and report that install cannot proceed without at least 2.6GB freespace (of which of course there isn't on the USB stick).
I've installed Ubuntu on a couple of systems before but this is the most advanced and I'm certainly no expert. It's an ASUS P6X58D-E mobo with two WD600GB SATA3 HDD's setup in RAID1 configuration. It's already running W7Ultimate x64 OK on it's own 150GB partition. Of course I can't even run gparted from the LiveCD to repartition. I suspect the problem is the RAID config, but not sure what to do.
View 8 Replies
View Related
Nov 24, 2009
I installed F12 with the i686 KDE livecd. A black screen with a blink "-" appeared after the bios information on the first reboot. The computer does not respond to any key input except "ctrl+alt+del", which restarts the computer.The machine is a dell inspiron 6000 with inboard 915gm video card, and the bootloader was written to the harddrive mbr. Any help would be highly appreciated.I need to be more clear. Installation went fine, problem appeared on the first reboot.
View 9 Replies
View Related
Mar 27, 2010
I need to re-install ubuntu but I also have windows on the same computer(GRUB). Can I just boot from cd? Is there and option in the live cd for reinstalls or do I have to destroy the partition?
View 3 Replies
View Related
Apr 17, 2010
I like Arch so far. The first time I installed Arch, everything went fine. I had a good openbox/SLIM configuration, but for some reason I just got a black screen w/ a mouse that didn't move whenever I tried to use the radeon driver (which works with my card). Anyways, I uninstalled Arch and reinstalled Fedora, but after my second attempt to install Arch (I have nothing better to do), arch suddenly wouldn't boot at all after a netinstall. Doing a core install went fine, but when I tried to update it and reboot, the same thing happened as the netinstall: The screen goes on standby and the CPU is spiked at %100 (I know this because my fan goes to full speed when the CPU jumps up too high - long story).
Not even doing that Skinny Elephants trick worked, so I'm guessing it was a complete kernel panic. I don't exactly know how to check for logs when the system is unbootable, but in retrospect I coulda just booted into a livecd. I just looked in /var/log of a recent Arch install on this computer, and there doesn't seem to be anything there. A file called 'lastlog', but I'm not sure it's anything. I can't open it with gedit or cat, so I'm assuming it's a garbage file. Adding 'nomodprobe' into menu.lst in Arch allowed it to boot, but I could only use the vesa driver with Xorg (using radeon caused a black screen showing only a cursor), which isn't ideal.
View 9 Replies
View Related
Sep 13, 2010
Recently freshly reinstalled ubuntu 10.04 on a new / blank hard drive and it now crashes on startup. Quick version: I have a nvidia Quadro NVS 295, it gets to the point just after the bios with the flashing dash, seemingly tries to init xserver / gdm then crashes. Keyboard lights go off but the pc stays on, and just sits there with the monitor in power saving mode. Tried in recovery mode, the blue / grey ascii terminal thing pops up for less then a second then the display crashes in the same way.
Swapping with an ATI card borrowed from elsewhere, the new install will boot quite happily. Anyone know how I can get 10.04 to boot with a nvidia quadro NVS 295? Its a bog standard card and my version of 10.04 I upgraded to on my old hard drive works fine. ts a reasonably new dell XPS 64bit pc.
Longer version:
I run 3 monitors using a PCI-e x16 NVS 295 and a PCI NVS 295. This worked great under 9.10 and 10.04. Boss gave me a solid state HD so trying to install 10.04 on that. However on my first install attempt the live CD failed to load (same problem as above, gets to init'ing the display and crashes with no output). I removed the second PCI card to run with just the 1 PCI-e x16 nvidia card, this time the live CD worked fine and I could install, but I am stuck on the boot problem. Booted into the system using the ATI card and did an update just incase something may have changes / been fixed but the issue persists.
View 2 Replies
View Related
Mar 12, 2009
I'm totally new to Linux. Got a fresh installation of Fedora 10 x86_64 on my HP dv7-1070el notebook with previously installed Vista Ultimate 64bit. I have 2 HDDs. The OS are installed on different hard-disks. The problem: I've chosen to put the boot loader on the first sector [...] on the second HDD (/sdb5) where Fedora is installed, not on MBR /sda1 where is Vista. Now, when I reboot, it goes straight to Vista and I expected to be asked for a boot choice.
What I want is to start using Fedora and to be able to choose which OS I want to use when I start my notebook. I'm not sure I made myself clear since I'm not too familiar with all terms so please correct me so I can learn . This is what I remember from installation. Everything else went great, no installation problems. If there's no way to get the dialog of which OS I want to boot, tell me the command for booting Vista when GRUB starts.
View 2 Replies
View Related
Nov 24, 2015
System is hanging during boot after a successful fresh install via netinstall disk. Never makes it to any GUI or prompt. However, it does still respond to CTRL-ALT-DEL (not completely frozen).Default debian installation with one exception - KDE checkbox was checked for installation. Everything else was default, with "use full disk with GRUB" option chosen.The boot process appears to hang during the service starts. It appears that the start job for "Create Static De..." is not actually ever completing. I don't know how to troubleshoot that any further than I have.
This is running on hardware, it is not a virtual machine. 480GB SSD, i7, 16GB of RAM, AMD R9 390 (I dunno if this is the problem, but it seems a likely culprit).There are no other disks attached. I have verified successful memtest completions (0 failures) and hard disk is intact and working fine (I have swapped for another disk, and the same thing happens as well).
My skill level with Linux is relatively low. I have proficiency using it and programming for it, but not much in the way of troubleshooting/ installation/ drivers.
Here is an album of "screenshots" (phone photos) of the boot sequence in debug: URL....I tried booting straight to console by removing "quiet" from boot options and changing to "text", but it does not alter the outcome in any discernible way.
View 6 Replies
View Related
Jan 12, 2009
I'm stuck with installing Fedora Core I have 2 hard drives both 80Gb I want to install a fresh copy on one of the drives to do a dual boot I have vista on the main hard drive this is where I am at Installation requires partitioning of your hard drive by default, a partitioning layout is chosen which is reasonable for most users. You can either choose to use this or create your owe. Select the drive to use for this installation?
View 10 Replies
View Related
May 10, 2010
I admit that I am a noob - knows a little which makes it more dangerous than not knowing at all. in brief, I am unable to boot one of the OS out of 3 I have installed. Everything is fresh install on newly formatted partitions.
Here are the details:Two HDs - one is Sata and second is IDE. Win7 installed on IDE (sdb2) then Ubuntu 9.10 on Sata (sda2) and lastly Linux Mint on Sata (sda3). Everyone was on its place - that is - Ubuntu 9.10 on sda2, Linux-Mint on sda3 and Win7 on sdb2.
Future of the day was bright and promising until I upgraded online to 10.04. After that, I was only able to boot to Win7 (IDE drive - sdb2 - not sure if it changed at that point or not) but no nix OS on Sata sda2 & sda3. I downloaded 10.04 and installed from CD again on sda2. Well, now I am able to boot into Win7 and Ubuntu 10.04 but no Linux-Mint. Another interesting thing is that sda and sdb have interchanged/swapped. So now if I chcek it thru gparted or run boot script, Sata drive shows up as sdb and IDE is now sda. In another post, I read that grub2 does that and make IDE drive as the first drive and Sata drive as second. Well, I buy that but why I am unable to boot to second OS on the same Sata drive? Evidently, I am missing something and I take that it is mostly user error but please
[Code]...
View 8 Replies
View Related
May 22, 2010
I have a Sony Vaio PCG-k195hp laptop, in which i've installed Ubuntu 10.04. Before installation i tried the Livedisk environment to make sure that everything would work out okay.
The results were fine, ubuntu even got the onboard Wireless card working which was causing problems in windows. But after the install ubuntu has become erratic. It sometimes boots and does a lot of work but other times it'll boot and freeze as soon as i move the mouse, or even earlier. I am pretty certain the CD was not the cause as i've already used it to install 10.04 in another system and i'm writing from it right now. I got the 10.04 iso on the day it came out and thought that maybe it wasn't complete so tried updating my install, but it had an error during the update installation.
Now even the live CD won't work as it hangs in the loading screen.
View 9 Replies
View Related
Oct 16, 2010
After buying a new PC, I decided to "reorganize" my former PC as follows:Initially it has been a dual (SATA) disk dual boot PC- one disk for each OS, while XP was fully installed on a single NTFS partition. Using Gparted I shrunk the XP partition, and created some Linux partitions. I've verified that the XP partition (sda1) is bootable. Afterwards, I removed the other (former Linux) disk from the computer. While doing so, I had to temporarily disconnect cables from both drives. Finally, I fresh installed Mint 9 (Ubuntu 10.04 derivative), on my pre-prepared Linux partitions. Installation completed flawlessly, and during the install, I've noticed that GRUB2 has been installed on sda. Rebooted and got "Disk boot failure" error.
I've checked the BIOS and noticed that the (single) drive was not recognized.
I manually tested from the BIOS and located the drive as IDE3. Saving the new configuration (F10) and rebooting- the HD gain is not identified (the CMOS battery is fine- keeps time).
Booting a live CD I can see and access all above partitions.
View 2 Replies
View Related
Oct 23, 2010
I have some proprietory softwares installed on WinXP so it is very important for my work that it is up and running.
I performed a FULL INSTALL from the Live-CD (10.10) and installed grub on the windows partition.
Now whenever I try to select the Windows option in the Grub menu, the screen goes blank and it gets me back to the Grub menu.
View 9 Replies
View Related
Nov 14, 2010
I have a persistent pendrive of Ubuntu: [URL]
It has a file where it saves the configuration of my computer: casper-rw
But if I boot this USB flash drive in another computer I would like to do it in a fresh way, that is, without loading the configuration of my computer (saved in the casper-rw file). For example, in Puppy Linux this can be done easily, just putting pfix=ram in a boot option of syslinux.cfg and selecting this option when booting.
I think this is important because I think that otherwise the Ubuntu (at least in some cases) cannot open if used in a computer different to the one where casper-rw was configured. It happens to me that I cannot run Ubuntu with my pendrive when inserted in a different computer (I think the reason is what I've said).
View 5 Replies
View Related
Apr 3, 2009
Fc11 installed well, it was related to a particular sata driver perhaps The installation went well up to the reboot, and then displayed the message saying that LogVol00 was not found. 3ware sata raid card, usually it installs without error
View 2 Replies
View Related
Feb 15, 2010
I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.
System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller
other items
All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.
The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.
View 2 Replies
View Related
Jan 9, 2010
So I currently have an install of Karmic running that has been upgraded over the years but I am repartitioning my drives so I did a fresh install on a new drive.
My first problem was the live cd would not boot and I had to use the alternate cd to do the install. It would boot into a blank screen and the i915.modeset=0 kernel parameter did not help.
After the installation finished I went to try and boot and found that right when it went to initialize the graphics, my computer locked up hard. Keyboard unresponsive and all. I read the forums and I tried using the kernel parameter i915.modeset=0 and removed quiet and splash from the kernel line to see if I could spot any errors but nothing appeared.
I am able to boot into recovery mode, and I tried even running an apt-get upgrade to get all my packages up to date and installed the latest nvidia driver but still have this issue.
I'm at a loss as to what I should attempt next.
Here is boot info, just to clarify sda and sdb are a fakeraid on my old setup, sdc is my new install
Boot Info Summary:
View 1 Replies
View Related
Mar 12, 2010
I was able to boot up the live CD and install the OS to the hard disk. *Single boot.After I rebooted, the system loads up to the Ubuntu splash screen and will "eventually" move along. The problem is that once it moves past the splash screen, it starts blacking out the screen. It looks like the screen turns on for about 10 seconds and then off for another 10 seconds repeatedly. The screen blinks like this indefinitely.This is my first attempt at installing and or using Linux so I am an uber n00b.
** Also, I am able to ctrl + alt + f1 and get to the terminal so i should be able to run any commands without any trouble.
View 1 Replies
View Related
Jul 8, 2010
I boot up after a fresh install and I don't get a boot splash screen. I really cant find a way to fix and some times it does not go to the login screen.
View 1 Replies
View Related
Mar 12, 2010
I had ubu 904 and vista installed on an 80gb drive, i had a spare 80gb drive also. I setup a raid0 config in my bios, then installed ubu9.10 onto it. All was fine until the very end, and then it said grub failed to install.
So i rebooted, and im left with a blinking cursor. How do i install grub? Ive installed ubu a few times now and never had an issue so now im lost.
View 1 Replies
View Related
May 23, 2010
I want to properly install Unbuntu on my multi boot pc. I would like to install to E partition which is currently ntfs. I have never installed Linux. What drive should the boot loader go? I can format E partition during install? Does it still need a swap file partition? If so, can that be made from E partition? How big? I'd like to have a boot menu to choose Ubuntu or a choice that takes me to the windows boot loader. Would that boot loader get wiped if I did a fresh install of 7 to the I drive? Also, what would be the proper way to upgrade Ubuntu? I see a lot of post where people are doing it wrong.
Here is my drives layout. Should install Ubuntu to my SSD J drive instead? I tried the live CD. Seems to work well. I have a Asus Max Formula MB, Phenom II 6core, ATI 4870. MB has a built in Via sound card. Not sure if that was working.
View 1 Replies
View Related
May 3, 2011
Followed steps 2-5 and purged/reinstalled grub now it boots as it should, NO idea where it was messed up.[URL].. I had 9.10 running in raid1 and upgraded my hardware (cpu, mb, memory etc) and wanted to do a fresh install of 10.04 to get updated. After following the various guides online such as [URL]...It begins to load grub and drops to a "grub> " shell. Which I have to do the following to get it to boot.
Code:
set root=(md1)
linux /vmlinuz root=/dev/md1 ro
initrd /initrd.img
boot
Then it boots up normally and I can use it like any other desktop. I've been over my grub.cfg and /etc/defaut/grub files and cannot find the issue. At this point I'm wondering if the fact it's a raid1 setup is keeping grub from finding it's files.
[Code]...
View 9 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Aug 9, 2011
After installing Fedora 15 from LiveUSB and rebooting it just hangs on a black screen with a blinking cursor (underscore) in the top left of the screen. If it's reached grub, it isn't responding to any commands, and mashing several key combinations (such as ctrl-alt-f1) will produce a beep usually emitted only by the BIOS (hinting that it may never be making its way to grub).
The only particularly interesting thing about the install is that by default it wanted to boot itself from the MBR on my primary-master (Windows) disk. Instead I selected the option to boot from "the first partition in sdb1", which is my primary-slave (Linux) disk, (the first partition being /boot). This way I can change which OS boots by changing the boot order in my BIOS, and so avoiding bootloader wars.
View 5 Replies
View Related
Mar 22, 2010
The last version a Linux I had was Mandrake v9.1. However, in looking to get the latest/greatest Linux I downloaded Ubuntu and Kubuntu. After installing Kubuntu the system reboots and fails to boot into the OS. After the P.O.S.T all I get a the word "GRUB". There is no response to any keys with the exception of Ctrl-Alt-Del. I am temporarily able to get passed the boot problem if I boot from the CD and choose boot from primary hard menu option. I'm not sure how to fix the boot up problem and could use some advice. However, using the CD to boot up the hard drives installation leads me to my next problem.
While in a desktop session I am unable to drag windows by their title bar. When attempting to drag a window, the desktop becomes covered with parts of the original window spreading all over the screen in multiple directions. It looks like a kaleidoscope or bad acid trip image. I suspect the video anomalies might be configuration related or improper driver. Again guidance would be greatly appreciated here.
I have a good 'ole Matrox MGA Millenium card installed into a P4 1.8ghz system, with 512 MB ram. The hard drive originally had an old install of Mandrake v9.1, but all of the partitions were wiped and I created 3 new partitions:
- /dev/sda1 20GB Bootable/Primary Partition EXT4 (Unbuntu mounted at /)
- /dev/sda2 18GB Primary EXT4 (Kubuntu mounted at /mnt/Ubuntu_dsktop_91)
- /dev/sda3 2GB Swap space
My intent was to install Ubuntu on the 2nd primary partition and be able to switch between them. However, I tried installed Ubuntu on the first partition (reformatted of course) and I encounter the same boot problem and display problem.
View 1 Replies
View Related
Oct 8, 2010
I'd like the final layout to have a Windows partition (will start out as XP and will become Win7 when I can afford yet another copy), a partition for Ubuntu, and a shared Data partition that I can use for all my files between both OSs. I think this should be fairly straight forward with Linux on a Primary partition with / and swap. Only thing is, from what I've read (and yes I know this is a bit old school) it might be a good idea to put in a /Home partition so that I can reinstall new upgrades and maintain settings. But I don't want to max out my 4 primary partitions so I can use a 4th partition as a kind of sandbox for OS testing without using VirtualBox all the time.
This leaves me in need of some advice, I've never used Fdisk and I was planning on just using the Ubuntu installer to do all of this, but I don't know if I can create /Home as a logical partition in the main Ubuntu partition and still have the benefit of being able to reformat /root without losing /Home. I might have just confused myself, because no matter how many guides and How Tos I read I still don't really get extended partitions, I understand logical vs. primary but extended is...confusing. I need the Ubuntu partition to be bootable, so it needs to be a primary partition...I think. Unless I can have: /boot, /, swap, and /Home...
Also, if Ubuntu can read NTFS, and Win7 can read Ext3, what should a do with /Data? Or should I just go with FAT32 and be done with it. (It's a big HDD btw, 640 GB, so /Data will be fairly large)
View 6 Replies
View Related
Jun 15, 2009
I'm trying to install F11 on a machine that was running well under F10 just a few hours ago. I made some changes to the disk configuration, involving the addition of a dmraid-controllable fakeRAID card (SiL 3124 I think) and creating a RAID 0 array out of the two drives connected to the motherboard itself (Intel ICH7R). Otherwise the machine's configuration is identical to the way it was when running F10. My problem is thus: when I boot from the installation DVD (64-bit), the boot process doesn't make it even to anaconda. Here is the error I get, right after md devices are autoconfigured:
[code]....
View 3 Replies
View Related
Mar 4, 2010
I set up an array of 2 hhd in raid0 using intel ICH7R, and i have a win7 installed on it. I'd like to have a dual boot with karmic, too. I googled a little bit and i found that it's not so easy as i thought. Are there anyone who's experiencing my same situation?
View 1 Replies
View Related
