Ubuntu Installation :: Boot Persistent Live USB In Fresh Mode?

Nov 14, 2010

I have a persistent pendrive of Ubuntu: [URL]
It has a file where it saves the configuration of my computer: casper-rw

But if I boot this USB flash drive in another computer I would like to do it in a fresh way, that is, without loading the configuration of my computer (saved in the casper-rw file). For example, in Puppy Linux this can be done easily, just putting pfix=ram in a boot option of syslinux.cfg and selecting this option when booting.

I think this is important because I think that otherwise the Ubuntu (at least in some cases) cannot open if used in a computer different to the one where casper-rw was configured. It happens to me that I cannot run Ubuntu with my pendrive when inserted in a different computer (I think the reason is what I've said).

View 5 Replies


ADVERTISEMENT

Fedora Installation :: Disk Boot Failure After Fresh Install From Live CD.12?

Feb 15, 2010

I've run the install to hard drive program three times over and each time I get "disk boot failure". I believe I've got Grub to install to the mbr but I am not sure.

System:
Barton 3200+ with 1GB of DDR1
Asus A7V333
High Point hard disk controller

other items

All the hard drives are hooked to the High Point controller. It recognizes all of them that have power hooked up and read/writes to them. Two have 98SE installs, the third is where I'm trying to install Fedora 12 to get away from some problems I'm having with 98SE.

The BIOS is set up to boot from the "SCSI device" which means it's booting from the High Point controller. The High Point lets me set a boot mark, which, when set to the Fedora drive, yields the disk boot failure no matter what I do to it.

View 2 Replies View Related

Debian Installation :: How To Boot Live ISO USB In UEFI Mode

Feb 15, 2016

As you probably know Debian LIVE ISOs is not (U)EFI bootable since there is no EFI bootloader on them. I need to boot usb for uefi mode...

View 3 Replies View Related

Ubuntu Installation :: 9.10 - Computer Would Only Boot In The Live CD Mode - No Files Were Copied

Mar 14, 2010

I have an old Dell Inspiron 8200 which I use for doing my CCNA study on. I installed Ubuntu 9.10 and it the cairo dock, all was running great, a little sluggish at times but thaht was down to the integrated display adaptor, no problem. I then decided to try out Open Suse but didnt like it so reformatted the whole disk back to Ubuntu then my problems started.

After going through the installation, I found the computer would only boot in the live CD mode, no files were copied. I then reformatted back to Windows XP and try top set up a dual boot system but the same results!, no data on my hard drive from Ubuntu!!. I then installed a new hard drive and tried a new dual boot installation but with the same results, what is stopping the machine form installing Ubuntu

View 2 Replies View Related

Ubuntu Installation :: Can't Create Persistent Live Usb Of 11.04

Apr 1, 2011

I have tried to create a persistent live usb thumb drive using Startup Disk Creator, but have not had any luck. I have tried running Startup Disk Creator from Linux Mint 9 xfce (currently installed on my machine) as well as from live sessions of ubuntu 11.04 Beta1 and xubuntu 11.04 Beta1. When using Startup Disk Creator in Linux Mint, I am able to set the slider to choose how much reserved space I want, but when I reboot, the USB stick does not load, I get an error message about an unknown name in the file. When using the live sessions of ubuntu or xubuntu, the section with the slider to choose how much of the usb stick to devote to the persistence file is greyed out. I get the same result whether I choose the xubuntu iso or the ubuntu iso as the source disc image. I have used the same USB stick and Startup Disk Creator to make persistent live installs before - is there something about 11.04 that does not allow persistence?

View 9 Replies View Related

Debian Installation :: Persistent Live Jessie System On 8GB USB Drive

Oct 28, 2015

I'm trying to create a persistent live Jessie system on my 8GB USB drive.

If that matters, I'm currently on an Arch Linux system, and I partly followed what's on the relative wiki (Pages Create a new MBR for a USB stick, Manually create a USB flash installation and Install Syslinux), plus a CrunchBang post explaining how to make a persistent live USB out of any Jessie-deriving distro (like their BunsenLabs Hydrogen).

The problem is, even if Debian boots up more than fine, the system isn't persistent at all.

Here's what I did (I know some passages are redundant, but still...):

Downloaded the Cinnamon flavor of Jessie via torrentErased the old MBR

Code: Select all# dd if=/dev/zero of=/dev/sdb bs=512 count=1 && syncCreated a 1.1G W95 FAT32 (LBA) active partition and used the remaining space on a Linux partitionFormatted the first to FAT32 and labelled it "Debian64". Formatted the second to ext4 and labelled it "persistence"
Code: Select all# mkfs.vfat -n Debian64 /dev/sdb1
# mkfs.ext4 /dev/sdb2 -L persistence
Mounted the first partition and the iso

[Code] ....

View 5 Replies View Related

Debian Installation :: Remove 70-persistent-net.rules During Live Startup?

Mar 2, 2011

I've created live squeeze usb-hdd and if I boot first time the udev system writes the MAC address of the network interfaces into /etc/udev/rules.d/70-persistent-net.rules.Because I use full persistence, the file is there on the next boot and I don't get network running automatically on other computers. My problem is, howto remove 70-persistent-net.rules every time during the startup?

View 5 Replies View Related

Ubuntu Installation :: Install On Usb Key: Live Mode Or Harddisk Mode?

Jan 30, 2010

I installed ubuntu 9.10/9.04 on my usb key as live image couple of time. I have trouble when I try to install wine on my usb key. I am wondering what is the difference if I install my ubuntu into my usb key directly? will that be slower compared with live CD mode? I guess live CD mode may use memory as part of harddisk to save temepory files and normal usb linux installation won't do this for me. Is this true?

If so, do I have a choice to point my tmp directory to system memory area?

View 1 Replies View Related

Fedora Installation :: Live Usb Media Persistent Storage Feature Not Working

Sep 1, 2009

live usb media does not let me to to save files and make modifications to live operating system that will persist after a reboot

I made the bootable stick with the liveusb creator at https://fedorahosted.org/liveusb-creator/ using an iso image of f10 live cd, a flash drive with 2 Gb capacity and a paersistent storage setting of 200 Mb

I changed root=XXXXXXXXXXXXXXi-do-not-remember-XXXXXXXXXXXX to

On the flash drive to make it bootable

I installed gparted on live operating system and when i rebooted gparted was not installed.

View 5 Replies View Related

Ubuntu Installation :: Live CD Boot Fail "Cannot Display This Mode"

Aug 28, 2010

Trying to boot Ubuntu 10.04.1 live CD and I get nowhere because the screen just stays black, with a monitor OSD alert saying "Cannot display this mode."

Is there a consumer version of Ubuntu available for regular people to use? I searched on the fourms and any post about "cannot display this mode" advises users to edit configuration files, or go into command line mode... what is this, 1991?

What is the real solution to this? Or is Ubuntu not made for consumer users? What other options do I have besides Mandrake?

The Ubuntu screenshots looks swell, nice graphic design of the user interface, pretty, but they should make the installer/live CD actually work like any other OS in 2010 first tho'.

View 2 Replies View Related

CentOS 5 :: Boot Into Rescue Mode Using Live CD

Oct 16, 2010

I am attempting to work with adding a new hard drive with a default logical volume setup. In order to complete the task, I am instructed to use a live CD to boot the system without mounting the drives using linux rescue. I am using CentOS-5.5-i386-LiveCD-Release2.iso

I have reviewed the centos documentation. When the live CD boots, it starts a count down to an automatic boot. I attempt to invoke the boot options as directed by hitting the tab and adding the words

linux rescue

At the end of the line and hit return to begin the booting process.

Unfortunately, the linux rescue boot option is ignored and the system mounts the hard drive. Additionally, I have checked the boot option several times by hitting the tab a second time and the option is not displayed.

In researching the issue, I inevitably get very similar instructions like:

Quote:The first centos CD or DVD has a rescue mode, just type on the boot screen: linux rescue

View 4 Replies View Related

Debian Installation :: Sd Card Boot Persistent ?

Dec 21, 2010

I was wondering if it can be possible to boot debian from micro sd card and have it persistent. I have checked the bios of my laptop and there are options to boot from USB and HDD (and from floppy, cd, network and hard disk), but not from sd card. Would it be a problem or could there be workarounds. That is of course if the whole thing is a good idea at all.

I have already booted the laptop from USB, but I would like to use it for everyday work and USB sticking out is bound to get snapped off. Sd card on the other hand would go inside in the slot. The hard disk is dead and is a bit expensive to replace (and unnecessary in respect of the volume, I only need a couple of gb for work)

View 6 Replies View Related

Ubuntu :: How To Create Persistent Live USB

Dec 31, 2010

I'm attempting to create a persistent live USB. My flash drive is 32 GB, so I plan on creating a 8 or 16 GB ext casper-rw partition for my persistence (as described here.) I would like to have the remainder of the space available as an NTFS partition. However, most of what I'm reading indicates that only FAT32 is possible for a bootable Ubuntu USB.

I've been told that if I simply installed to USB drive as if it were a regular old HDD, it would be bootable and I could simply format the rest as NTFS. I'm wondering if this is true and why all these utilities I've found (Linux Live USB Creator, Universal USB Installer, etc...) insist on FAT32. Persistent (>4GB) bootable usb, with the rest of it a windows-recognizable NTFS partition?

View 1 Replies View Related

Ubuntu :: Make A New Persistent Live Usb For The 64 Bit Machine?

Feb 18, 2011

Currently got a 32bit laptop and im running Ubuntu desktop 10.10 with the 32 bit version, If I upgrading my machine would i need to make a new persistent live usb for the 64 bit machine?

View 3 Replies View Related

General :: Ubuntu NR - Install Vs Live-persistent

Nov 11, 2010

I have an old EeePC 701 4G netbook that I'm about to reconfigure for a friend who needs it to read PDF files, surf the net occasionally and do few other things. I'm going to install Ubuntu Netbook Remix, version 10.4.

Now, the 701 only has four gigabytes of internal storage, and I'm unwilling to spend money on it to expand its memory. When installed UNR takes up about 2.3 gigabytes, which leaves a bit more than a gig available for user data, and that's not much at all.

However, I could copy the live files off the memory stick in the main drive and use the remaining space for a casper-rw partition. Then it'd be only a matter of editing the bootloader in order to have a system that saves changes. This way I could fit the system on only 700 megabytes.

My question is: is there any drawback to running a persistent live off the main drive as the operating system? Something that would make me prefer eating up two thirds of the drive with the system, rather than just a fifth of it?

I imagine upgrades would eventually take up a lot of space, as they'd essentially copy a lot of the system in the live partition, but this is easily solvable by not performing them. I don't think the intended user would miss them, since she'll only really need three or four apps.

View 3 Replies View Related

General :: Ubuntu Live-cd Persistent And Also Read-only?

Mar 18, 2010

I have already a ubuntu live-cd running with persistency on a USB stick but I would also want to be able to launch it, loading all the saved preferences in the casper-rw partition, but without any modifications on those settings.The idea is to have on the start menu 2 options:1- start ubuntu saving changes (on the persistent partition)2- start ubuntu not saving changes (not persistent, but loading the previously changed settings)This way, I could save preferences incrementaly, but only when I opted for the option 1.

View 3 Replies View Related

Fedora :: F14 Live USB - Cannot Make Persistent Changes

Jan 10, 2011

I am running a live (4gb) USB of Fedora_14 with 768mb persistent storage. I am trying to add firmware for broadcom wireless link, as it is not natively supported. When I download tar, extract and copy missing firmware then reboot... all changes are reverted back. How do I make these changes persistent upon reboot.

View 8 Replies View Related

Software :: Create A Persistent Live USB?

Apr 20, 2010

I'd like to make a "live" USB, probably Ubuntu or a derivative such as Mint. How do I make it persistent? FWIW, this particular project will be primarily used for Ubuntu Studio. My hardware works fine with all versions of Ubu and Deb so there are no driver issues, simply the question of adding persistence to the stick

View 2 Replies View Related

Ubuntu :: Lost Persistent Home Media In Live?

Sep 7, 2010

I partitioned a 32 gB flash drive to one 8 gig and one 24 gig partition. Both fat32. I wanted to be able to access the 24 gig partition from XP.I installed a persistent 10.04 on the 8 gig partition.All ran well for about 3 weeks. Today during boot up I noticed that it had stalled at "creating live session user". I left it there for several minutes and then powered down to retry.Several attempts to boot left me at the same spot.I looked at the boot up messages and noticed this error... "unable to find persistent home media".I don't have a ton of save info on the live user account but I would like to be able to fix this type of problem.

View 3 Replies View Related

Debian :: Making Live USB Squeeze Persistent

Nov 8, 2010

I need to have a persistent Debian install on a thumbdrive to run a computer that is currently diskless (dead hard drive). So far I've managed to get it to boot Squeeze live beta by setting up the thumbdrive with UNetBootin, but it's not persistent. I found this, but step 6 is a mystery to me, as I can find no such command or package.

View 12 Replies View Related

OpenSUSE Install :: 11.2 KDE Live Persistent USB Hangs

Feb 11, 2010

I've created a live and persistent USB boot of OpenSUSE 11.2 KDE according to the howto. It boots and works fine for about 5 minutes and then hangs. Only the mouse will move but I can't click on anything and it never comes back.

View 3 Replies View Related

CentOS 5 :: Live On USB Flash Drive Non-persistent

Jul 27, 2009

I just tried Centos 5.2 Live starting from a 2 GB USB flash drive. Everything seems to run fine, fast, stable - except for that the persistent feature is not working. I created the USB from Windows using the Centos 5.2 LiveCD image and the current version of Live USB Creator (3.7), and declared a 256 MB persistent space.

This persistence feature had worked before with Fedora 11 but the system resulted unstable, kernel panic.... Now Centos has been solid for hours in a row... but the file where persistence should be reflected remains untouched with the initial creation timestamp. When rebooting, every change in config, file created etc gets lost.

View 2 Replies View Related

Ubuntu Installation :: 10.4 Beta2 Install Failure (Even Live Mode)

Apr 17, 2010

Tried to install 10.4 Beta2 on my testing machine. Boots but then splash screen starts scrolling really fast though I can notice that 5 dots are moving so no hanging. It takes quite a while and then black screen appears (also scrolling) and I cannot read what's there; last line looks like a prompt. Alt-Ctrl-Del reboots the machine. So I cannot even enter Live mode.

This machine is about 7-8 y.o. P4 2.4GHz (i686) on Asus P4S333/c, 2.5GB ram, GeForce3-Ti200, latest bios 2003 but runs any Linux (I tried) and FreeBSD 9-CURRENT perfectly (Even win7 is installable...but runs badly). On newer machine same CD works fine. The machine is AthlonX2 2.3GHz on Asus M3N78-vm, 4GB ram, onboard chip GeForce8200, HDDs, DVD-RW - all SATA (AHCI). What could be wrong with my old machine? Does Ubuntu still support 96xx Nvidia driver?

View 3 Replies View Related

OpenSUSE Install :: Persistent 11.2 Live System On USB Not Booting

Dec 2, 2009

Yesterday I did follow exactly the description how to build a live system on a USB Stick with the additional second partition for the data of Live_USB_stick. So far I had success, as my Netbook did start booting and loaded the OpenSUSE 11.2. Then I rebooted the Netbook and it never again comes up with the 11.2. It looks as if it would stop somewhere at starting the graphical system, but I'm not sure.

Today, second try, I created the USB stick with the 11.2 Live System only (no second partition). My Netbook starts booting and shows the 11.2 system successfully, also further boots are the same successful. Then having created the Live system with the second partition again, results in a un-bootable Netbook again (not even the first time it comes up).

What I wonder when I did check the USB partitions: the one (sdg1) with the Live-CD can be mounted and the content is readable. The second one (sdg2) cannot be mounted; shouldn't it be mountable and shouldn't it be formated with a file system? Did anyone have some experience on this? Or, at least, the people having a running persistent live system, what does the partition them show up?

View 5 Replies View Related

Fedora :: F14 Live USB - Overlay Persistent File Space

Nov 20, 2010

I just set-up my fedora-14 live usb on an 8gb usb hard drive but I see the space left on '/' is less than 800mb (I created a 3.5gb persistent file) like so:
Code:
livecd-iso-to-disk
--unencrypted-home --home-size-mb 3500
--overlay-size-mb 3500 Fedora-14-x84_64-Live-Desktop.iso /dev/sdc1
but I still don't have much space to install programs.

Is there a way to trick yum into installing programs under /home/liveuser/programs instead ?:
Code:
[liveuser@localhost ~]$ df -h
Filesystem Size Used Avail Use% Mounted on
/dev/mapper/live-rw 3.0G 2.8G 223M 93% /
tmpfs 1002M 352K 1002M 1% /dev/shm
/dev/sdb1 7.4G 2.0G 5.1G 28% /mnt/live
/dev/loop5 3.2G 130M 2.9G 5% /home
varcacheyum 1002M 0 1002M 0% /var/cache/yum
/tmp 1002M 92K 1002M 1% /tmp
vartmp 1002M 0 1002M 0% /var/tmp

View 5 Replies View Related

General :: Live Persistent Usb Drive With Multiple Distros?

Jun 11, 2011

I have a 16Gig usb drive and i've managed to get Backtrack up and running on it with persistence, but I really want to have on it is Mint, Backtrack 5, if possible Ubuntu and hirens bootcd. I don't really want to use unetbootin. how i need to set up the partitions, if it's possible to have both Backtrack 5 and Ubuntu with persistence since they both use casper-rw and what mint needs for persistence.

View 6 Replies View Related

Ubuntu Installation :: Vista Only Booting Into Recovery Mode After Installing From A Live USB?

Sep 4, 2010

So I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.

View 9 Replies View Related

Debian Configuration :: Custom Amnesic Live CD With Persistent Partition

Nov 9, 2015

I want to customise an amnesic Debian environment (like Kali Live CD) with everything (Users, background, icons, etc.) set up to work the way I need. This OS should be inside a memory stick, and, most important, it has to have an encrypted partition I can mount and unmount whenever I want to save persistent data.

View 5 Replies View Related

SUSE :: Persistent Live USB - File System Appears Read Only

May 4, 2010

I have made a persistent live usb of suse 11.2 using a '.iso' file. Now when I boot from the Live usb, the file system appears read only. I want do some modifications in the files.

View 2 Replies View Related

Debian :: Create Customized Live USB With Persistent Home Partition

Feb 3, 2011

I have Lenny installed. How to create, using live-helper customized Live USB with a persistent /home partition on this USB stick, to save changes between boots?

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved