Ubuntu :: ERROR: Unable To Load The Kernel Module Nvidia.ko

May 16, 2010

for the last few releases, starting with 9.04 i've been having serious crashing problems with the nvidia driver. whether i installed it manually using the latest drivers directly from nvidia, or installing them through the restricted driver option. after a few hours CRASH. it's been awful. and i tried everything from this side to the moon to fix this issue, all to no avail. no idea why i've even stayed with ubuntu after all these issues. came from the debian world back in 5.04, and almost moved back a few times. but i did a clean install of 10.04, and thought i'd give the nvidia driver one last chance... if it didn't work i'd be moving back home to debian (with the suspicion the issue would stay).

so after i tried the restricted driver and CRASH. nothing to fix it. then i thought ok i'll try to use the latest driver from nvidia. but ran into this error when installing it:

Quote: ERROR: Unable to load the kernel module nvidia.ko. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from obtaining ownership of the NVIDIA graphics device(s), or NVIDIA GPU installed in this system is not supported by this NVIDIA Linux graphics driver release. so after googling around i found a fix to this error i was getting during the install:

Quote: sudo nano /etc/modprobe.d/blacklist.conf

blacklist vga16fb
blacklist nouveau
blacklist rivafb
blacklist nvidiafb
blacklist rivatv

[Code]...

View 5 Replies


ADVERTISEMENT

Fedora :: Unable To Load Kernel Module 'nvidia.ko'

Nov 29, 2009

im trying to install the driver for my nvidia GeForce 7300 GS.i have Fedora 12 installed in an Intel duo core 2 processor 64 bits.kernel installed is 2.6.31.5-127.fc12.x86_64...i followed leigh's guide i did the 4 steps but after reboot screen goes blanck and X dont work.the log says:

-> Kernel module load error: insmod inserting './usr/src/nv/nvidia.ko'
-1 no such device

View 11 Replies View Related

CentOS 5 :: Can't Install Nvidia Drivers (Unable To Load The Kernel Module "nvidia.ko")?

Jul 28, 2009

So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686

If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from

[Code]...

View 5 Replies View Related

Ubuntu :: NVIDIA: Failed To Load The NVIDIA Kernel Module?

Aug 31, 2010

I spent quite a lot of time jumping from one thread to another trying to fix a problem with my NVIDIA drivers in Lucid. I was getting the error message on startup: NVIDIA: Failed to load the NVIDIA kernel module ...Failed to load module "nvidia" (module-specific error, 0) No drivers available".

After a lot of trial and error, this is what worked for me (I have updated this thread following [URL]):

- Download the latest NVIDIA driver from www.nvidia.com/page/drivers.html

- In the terminal cd to the directory where you downloaded the driver package (e.g., $ cd Downloads)and make it executable (e.g., $ sudo chmod +x ./NVIDIA-Linux-x86_64-256.53.run)

- Edit blacklist.conf $ gksu gedit /etc/modprobe.d/blacklist.conf

and add the following lines to the end of the file:

#recommended by http://ubuntuforums.org/showthread.php?t=1467074
blacklist vga16fb
blacklist nouveau
blacklist rivafb

[Code].....

View 2 Replies View Related

Ubuntu :: Failed To Load NVIDIA Kernel Module?

May 11, 2010

My nvidia graphics driver was updated last night, and since then I've been unable to get into Gnome without resorting to low graphics mode. I have extensive knowledge of Windoze systems. Upon boot up, I get the following error:

(EE) NVIDIA(0): Failed to load NVIDIA kernel module!
(EE) NVIDIA(0): *** Aborting ***
(EE) Screen(s) found, but none have a usable configuration

I've tried some troubleshooting, including attempting to uninstall all nvidia drivers and reinstall (via synaptic).

Administration->Hardware Drivers reports that version 173 is installed loaded and active. Nvidia X Server Settings (nvidia-settings) gives me the "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server." error.

I've tried the nvidia-xconfig (both with gdm up and down) and it hasn't made any difference.

Oh, it's a GeForce 6200 wwith two Dell E193FPp monitors running on Ubuntu 10.04.

Here's my xorg.conf:

# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Fri Mar 12 01:42:27 PST 2010
Section "ServerLayout"

[Code].....

View 9 Replies View Related

Ubuntu :: 10.04 - Failed To Load NVidia Kernel Module

Aug 8, 2010

My laptop broke beyond repair recently so I am stuck on a 6 year old hp pavilion zv5000 given to me by a friend and I thought I may as well give linux a go, I have been meaning to for years. I've installed xubuntu 10.04 as I heard it is less resource intensive than normal ubuntu but have been unable to configure the nvidia graphics card. I used the hardware drivers program which installed the nvidia accelerated graphics driver 96 (which was the recommended version) and then ran sudo nvidia-xconfig as instructed and got

Code:
Warning: Unable to locate/open X configuration file.
New X configuration file written to '/etc/X11/xorg.conf'

Which I presume means it worked correctly, but whenever I try to boot I get a message saying "failed to load nvidia kernel module", at which point I either have to restore the generic configuration or just start the session in low graphics mode. I have googled the problem and in a lot of peoples cases it seems to be linked to upgrading from a previous version whilst mine was a fresh install. I tried sudo modprode and it says the nvidia module isn't present. I tried installing the packages in synaptic which mentioned nvidia kernel modules but still no luck.

View 1 Replies View Related

Ubuntu :: 10.10 - Failed To Load NVidia Kernel Module

Feb 4, 2011

I am trying to fix my friends laptop and after the most recent upgrade she performed she got this error message when her laptop boots. Thing is that it stays frozen in that mode. I don't even see the grub boot loader. I know its the only operating system she has running on her laptop as well. The following error was encountered. You may need to update your configuration to solve this.

(EE) NVIDIA: failed to load the NVIDIA Kernel module.
please check your
(EE) NVIDIA: system's kernal log for additional error messages.
(EE) failed to load module "nvidia" (module-specific error, 0)
(EE) no drivers available
She is running ubuntu 10.10

View 5 Replies View Related

Ubuntu Multimedia :: Module Nvidia Failed To Load With Kernel 2.6.32-33

Jun 7, 2011

I am using Ubuntu 10.04 LTS.With the last update, I have installed the kernel 2.6.32-33.And I have the message "module nvidia failed to load" in Xorg.log.0 My "current" nvidia module is 195. I have tried without success to reinstall nvidia. What I must do ? Wait for a new update of nvidia ?

View 3 Replies View Related

Software :: Failed To Load NVIDIA Kernel Module

Nov 26, 2010

So I just recently got my proprietary driver working yesterday (and enjoyed too many hours of Starcraft 2 afterwards) but today after I downloaded an Update Package and rebooted, it's telling me that it "Filed to load NVIDIA kernel module".So now I'm back to square one, I had to restart in the lower graphics mode or whatever it's called prior to logging in.When I go to System - Admin - Hardware Drivers, nothing shows up and it says no proprietary drivers are in use on this system.

When I try to change the resolution under System - Preferences - Monitors (since everything is so big) I get "It appears that your graphics driver does not support the necessary extensions to use this tool. Do you want to use your graphics driver vendor's tool instead?" I select "Yes" and I get "You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server."I'm a total loss here, I'm assuming something from the update package has caused everything to go haywire and I'm hoping that if/when I get this fixed I don't have to keep doing this fix every time I use the Update Manager.I'm still fairly new to this whole Ubuntu thing, so any step-by-step instructions would be appreciated

View 6 Replies View Related

Ubuntu Multimedia :: Failed To Load Nvidia Kernel Module In Lucid

Oct 15, 2010

I am running my PC on Lucid. It has been working fine, but suddenly the other day I got an error message when booting, saying that Nvidia kernel module failed to load. I had to boot in low graphics mode. The only thing i can think of that had changed is that I had recently upgraded to latest Linux kernel 2.6.36-25.I have tried carefully following tips on numerous threads on this forum and others, but still no go. I have purged nvidia drivers and reinstalled nvidia-current (also tried nvidia-glx-185). However, when I then do <sudo modprobe nvidia>, I get this message:

WARNING: All config files need .conf: /etc/modprobe.d/lrm-vide, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/blacklist, it will be ignored in a future release.
WARNING: All config files need .conf: /etc/modprobe.d/bad_list, it will be ignored in a future release.

[code]....

When I go to System>Administration>Hardware Divers, it shows Nvidia-current as present but not currently activated.I have blacklisted vga16fb and nouveau in blacklist.conf, done <sudo nvidia-xconfig> etc.I am at a loss as what to do next, and am still new enough to Linux to not be in a position to fiddle to try fix it myself.

View 1 Replies View Related

Fedora :: Updated Kernel / Now Nvidia.ko Module Doesn't Load

Feb 26, 2010

I think I know quite well what my problem is. However, I'm still too much of a newbie to know how to solve it.My problem: I no longer get a login screen on my server after I ran a yum update which updated my kernel (thank god, vnc server still works).Cause: During startup Fedora complains that it can't load the module nvidia.ko. Reason: The module doesn't match the current kernel.

View 5 Replies View Related

Fedora :: Error "Failed To Load Module "nvidia" (module-specific Error,0) No Drivers Available

May 1, 2011

I've been unable to boot into x using the real-time kernel from CCRMA at home. I get the error "Failed to load module "nvidia" (module-specific error,0) no drivers available. I'm using the driver from Nvidia. I know that this is not an official Fedora kernel and I should be bothering CCRMA about this, but in the mean time could I edit the entry in grub.conf so that it will use the Nouveau driver for that kernel only? That way I could "dual-boot", and just use the rt kernel when I want to use audio software and don't need 3d graphics.

View 5 Replies View Related

Debian Multimedia :: Nvidia Module Unable To Load / Get It To Work?

Feb 19, 2011

I am running squeeze on a PC 1386 and installed nvidia by using the packages in unstable. I was able to install nvidia and there was no error until the time I started X. The error is unable to load module "nvidia" (module does not exist, 0).

I looked up the log for Xorg and it says Unloadable Module "nvidia".

I spent the entire 24 hours to fix it because this is my office computer and I practically done all the stuff found in the forums. I already did nvidia-xconfig to no avail. I even edited xorg.conf manually and still it was not up.

I have some suspects however which are:

1. Different versions between kernel and nvidia (but since I did it the debian way then I should not have any problems).

2. Nvidia-glx is unusable in Squeeze, so does it mean I go for the unstable distro?

3. Or I miss something crucial on how I installed it?

By the way, I installed Nvidia because I am using a SAMSUNG 21' LED monitor.

View 14 Replies View Related

Ubuntu Multimedia :: Unable To Build The NVIDIA Kernel Module?

Feb 26, 2011

before i get a lot of annoyed responses, I did check the forum and found a couple older previous threads on this topic, but they don't seem to really explain any real solutions to the problem im having.Here's the story- I was looking around for instructions and found this "howto guide" on installing nvidia display driver [URL]I went through the steps he listed:

downloaded the driver packages, install the dependencies from the shell, and then i pressed CTRL+ALT+F2 to get out of X and into text mode. I stopped my gdm with the command: sudo /etc/init.d/gdm stopand then i tried to install the driver using: sudo sh (on my NVIDIA driver- his version was a bit outdated compared to the one I downloaded)But here is where the problem starts, as I go through the installation process and click yes, i reach the "progress bar" then the screen says "unable to build the NVIDIA kernel module". and then it just exits. What is going on here? Am I missing some other package or file?

View 1 Replies View Related

Slackware :: Slax - Unable To Build NVIDIA Kernel Module

Jan 9, 2010

I started slax in cli mode and tried to install nvidia driver before running X but it won't install. My log:

Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Jan 10 04:21:14 2010
option status:
license pre-accepted : false
Update : false
Force update : false
Expert : false
uninstall : false
Driver info : false ....

ERROR: Unable to build the NVIDIA kernel module.
ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details.

View 5 Replies View Related

Ubuntu :: "Failed To Load The NVIDIA Kernel Module"?

Sep 29, 2010

i just recently upgraded to Ubuntu. I also just installed the Nvidia 256.53 drivers for my gtx 460. I did that and it worked fine. But the other day i did some updates that were prompted to me on the desktop. So i did those, then i restart and i got "Failed to load the NVIDIA kernel module." It then asked if i wanted to run in nvidia low graphics mode, which i did. So i am currently trying to figure out how to fix my NVIDIA drivers so that i have 1920x1080.

View 5 Replies View Related

Ubuntu / Apple :: Error - Failed To Initialize The NVIDIA Kernel Module

May 1, 2010

I keep getting a warning messaged almost every time I reboot about Ubuntu running in low-graphics mode on a Macbook 5,1. This has been happening since Lucid Beta 1.

Quote:

Failed to initialize the NVIDIA kernel module. Please see the
system's kernel log for additional error messages and
consult the NVIDIA README for details.

[code]....

After I finish loading in low graphics mode I have to run "sudo nvidia-xconfig". Then, the next reboot the graphics card driver is loaded properly. Is anyone else experiencing this problem or have an idea how to correct it? I know it is a long shot, but do you think doing a fresh install of the stable release would work?

View 3 Replies View Related

OpenSUSE Hardware :: Unable To Build Kernel Module For NVidia On A Fresh 11.4 Installation?

Mar 13, 2011

I'm trying to install the nVidia driver for a fresh Installation of OpenSUSE 11.4 (32-bit) but I'm running into some issues. I followed the instructions (SDB:NVIDIA the hard way - openSUSE) using the driver binary mentioned in the workaround link (NVIDIA DRIVERS 256.53 Certified) but the installer fails while building the kernel module with the following errors:

Code:
nvidia-installer log file '/var/log/nvidia-installer.log'
creation time: Sun Mar 13 17:32:56 2011

[code]....

View 7 Replies View Related

Software :: Audio Driver Install - ERROR - NVIDIA Kernel Module Was Not Created

May 29, 2010

I tried to install NVIDIA audio drivers on fc10 (2.6.27.41-170.2.117.fc10.i686).

It ended up in this error.

I am attaching nforce-installer log for your details.

Code:

By default I can use internet (without network drivers installed), how is this possible? And why not audio?

View 1 Replies View Related

CentOS 5 :: Create New RAM Image File To Get Server Load Raid1 Module Upon Start - Mkinited Error No Kernel Available For 'inited-2.6.18-128.el5"

Nov 12, 2009

I'm trying to create new RAM image file to get my server load raid1 module upon start, I was following redhat documentation & it suggested to use the following command mkinited --with=raid1 inited-raid1-$(uname -r).img $(uname -r) However after running this command I'm getting this message No Kernel available for 'inited-2.6.18-128.el5"

View 4 Replies View Related

Networking :: Rtl8187 Driver Module Load Error (Invalid Module Format)?

Jun 1, 2009

When I try to load the Realtek 8187 modules to kernel using the ./wlan1up command, I get the following error:

[root@localhost rtl8187_linux_26.1025.0328.2007]# ./wlan1up
insmod: error inserting 'ieee80211_crypt-rtl.ko': -1 File exists

[code]...

Can someone tell me how to correct the "Invalid module format"? I hope that correcting the "Invalid module format" error, I will not have the "Unknown symbol in module" error.

Note: I am using wlan1 for this module as I previously am online with the wlan0 network.The same error occurs if I use ./wlan0up.

View 3 Replies View Related

Fedora :: (EE) Jul 30 06:32:07 NVIDIA(0): Failed To Initialize The NVIDIA Kernel Module

Jul 30, 2010

I updated kernel and everything seemed ok, except HD-PVR is locking up and recording only two minutes of every show it records. So, I have gone back to my previous kernel, but it seems that X isn't starting:

Code:

(II) NVIDIA dlloader X Driver 195.36.31 Thu Jun 3 08:27:29 PDT 2010
(II) NVIDIA Unified Driver for all Supported NVIDIA GPUs

[code]....

Fatal server error:no screens found I had done a yum install kmod-nvidia for the newer kernel. I am thinking I need to get the kmod for the current kernel again (2.6.32.12-115.fc12.x86_64 #1 SMP Fri Apr 30 19:46:25 UTC 2010 x86_64 x86_64 x86_64 GNU/Linux), but am not sure how that is done?

View 2 Replies View Related

Debian :: Nvidia Module Sometimes Won't Load

Jul 25, 2010

I'm fairly new to Debian, but during the past I've used Mandrake, Slackware and Ubuntu. Few months ago I've migrated from Ubuntu to Debian - I like it a lot but there is one thing which keeps bugging me.Sometimes - one of the few boots - nvidia module won't load and GDM won't start. During the "bad" boot system freezes for a while after the message "PME# disabled" and gives the message about nvidia GPU not supported. Because of that GDM fails to start.Below are the boot logs (without the leading time for easy diff comparison) - the "bad log" when nvidia fails to load and the "good log" when everything is OK. Any help?

View 14 Replies View Related

Ubuntu Multimedia :: Nvidia Module Won't Load / Make It Possible?

Jul 23, 2010

This nvidia driver is driving me nuts... I have tried everything I can think of including multiple solutions from threads.

I have a GeForce FX5200 with the nvidia-current drivers installed. On boot I receive the following error messages... code...

If I try and open the nvidia server settings I get the following message.

You do not appear to be using the NVIDIA X driver. Please edit your X configuration file (just run `nvidia-xconfig` as root), and restart the X server.

In Jockey I get:

The driver is activated but not currently in use.

I am using headers 2.6.32-23 and have updated to grub2 (something that seems to have fixed a mismatched header issue for others). I have uninstalled and reinstalled drivers, edited the xorg.conf with nvidia-xconfig as well as manually and I don't know what else to do... any suggestions would be appreciated... 640x480 is crap.

View 2 Replies View Related

Debian Configuration :: Nvidia Kernel Module With Custom Kernel

Jan 24, 2010

I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.

View 2 Replies View Related

Ubuntu :: Error "Unable To Build Kernel Module" When Try To Run VMWare Workstation

Jun 12, 2011

when i try and run the latest vmware workstation, i get an error at compiling virtual machine monitor it says: Unable to build kernel module. See log file /tmp/vmware-root/setup-7625.log for details. When i try and go to the folder vmware-root it says i do not have the required permissions. I'm on the latest 11.04, i really need this working.

View 2 Replies View Related

Ubuntu :: Load Scsi_mod Kernel Module?

Sep 2, 2010

xubuntu 9.10 I have a Drobo, sort of RAID storage device. It makes use of volumes of 2TB. Only the first volume (LUN) is shown up. According this information;[URL]... that happens if the scsi_mod kernel module is not loaded.

View 1 Replies View Related

Hardware :: Installing NVidia GeForce 2 MX 400 - ERROR: Unable To Determine The Version Of The Kernel Sources

Jan 11, 2011

I have installed Arch Linux quite a few weeks ago; but I'm still trying my best to install the nividia display driver for my graphics card (nVidia Geforce 2 MX 400). Not only in Arch but have tried installing on other distros and still failed. I have read up all the documentations and I still find it hard to do this task. When I used the terminal and executed the NVIDIA-Linux-x86-94.43.01-pkg1.run file without any window manager running, I get this problem:

Quote: ERROR: Unable to determine the version of the kernel sources located in '/lib/modules/2.6.35-ARCH/build'. Please make sure you have installed the kernel source files for your kernel and that they are properly configured; on Red Hat Linux systems, for example, be sure you have the 'kernel-source' or 'kernel-devel' RPM installed. If you know the correct kernel source files are installed, you may specify the kernel source path with the '--kernel-source-path' command line option.

ERROR: Installation has failed. Please see the file '/var/log/nvidia-installer.log' for details. You may find suggestions on fixing installation problems in the README available on the Linux driver download page at [URL].

Now I'm using Arch Linux Kernel 2.6.35 and I have got the source. But where am I suppose to put it now? I do not want to change the kernel. I just want the nVidia installer to identify that there is a kernel source so that it can install. I have searched up a lot on websites and ended up with no proper guide. This is a very old driver. So since now I have the nVidia driver installation package and also the kernel source

View 13 Replies View Related

Debian :: Failed To Load Kernel Module

Jun 23, 2015

I'vd a problem with loading modules. Booting gives the this error:

Code: Select alllucas@debian8-1:~$ systemctl --failed
  UNIT                         LOAD   ACTIVE SUB    DESCRIPTION
● systemd-modules-load.service loaded failed failed Load Kernel Modules

LOAD   = Reflects whether the unit definition was properly loaded.
ACTIVE = The high-level unit activation state, i.e. generalization of SUB.
SUB    = The low-level unit activation state, values depend on unit type.

[Code] ....

Always the same error when booting. After a period of time, (Graphical User Interface) the mouse click no longer operates, also text input isn't possible.

I had no access to the system at all, even crt alt F1 stopped working, also text input was no't possible. so reinstall was the only option. Maybe there is a connection with this two errors.

I've reinstalled Debian 8 several times. Still, both errors stay.

The same happend again (in the GUI) is nothing possible, no txt input, no mouse click), but now I have access to the system, ctr/alt F1 is working.

View 12 Replies View Related

General :: Automatically Load Kernel Module?

Aug 6, 2010

I'd like openSUSE to automatically load a kernel module (e.g. libsas) at boot time even no device requires it. In Ubuntu, you would add the module name to the file /etc/modules. Is this the correct place for openSUSE as well?

View 1 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved