i noticed my desktop has the option in its bios to use this since i mainly use it as a server i wanted to be able to power it on remoly once i found out it was possible
lets say for sake of example the mac address on it is 00:11:22:33:44:55 on the dekstop
also wondering if it is possible to power down the nvidia video card i would like to have it complexly ignore the card's existent and cut power to the slot i would like to basically pick server/desktop mode from grub 2 default being server
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
I can't figure out how to install the nvidia drivers for my nvidia 8800 GT video card. I've followed some other posts and all the posts seemed either incomplete, or led me down a path of which eventually broke my installation, that I needed to reinstall the entire ubuntu system.Again, it may not have been broken, i just didnt know how to get back in to the gui version of ubuntu, the instructions took me to the console terminal
1.) I've installed the ubuntu 10.10 64bit for i386 in an oracle virtualBox..
2.) downloaded from nvidia.com "NVIDIA-Linux-x86_64-260.19.44.run"
I'm attempting to get Debian (Squeeze, latest net-install CD) working on a Power Mac G5 Quad with a Radeon X1900 Mac edition video card (PCI-Express.) The installer acted a bit weird right from the start, telling me that the step "Install the system" failed (with nothing in the way of useful error information,) but I got the base system installed at least. It booted fine to framebuffer console, so I set about installing GNOME on it. apt finished with nary a complaint, but when I rebooted, I found that when it's ready to launch into X, it chokes up and just sits there with a blank screen and a cursor. (Weirdly, though, the screen itself flickers on and off at a high rate, faster than the actual cursor blink.)
Framebuffer console still works, at least, so I was able to boot into single-user mode and do some investigating in my own limited capacity for this stuff (by which I mean "Google error messages and see what specifics are requested.") lspci -k shows the video card properly with the manufacturer and product name, so it is recognizing it, at least. When I try Xorg -configure, though (Xorg 1.7.7, it says,) it aborts with a "No DRICreatePCIBusID symbol" message. Checking dmesg gives me a "process Xorg mapped non-existing PCI legacy memory" message, followed by an "invalid ROM contents" message underneath.
I'm not sure what all to make of this. I've found a thread about problems getting the same basic setup (G5 Quad, X1900, Debian) to work, but it's a couple years old and the symptoms are different. There's some discussion there about the radeon/radeonhd driver looking for Atom BIOS information on non-Atom BIOS cards, which would explain the "invalid ROM contents" message, but on the other hand, if lspci recognizes the card properly, would that be the problem? I don't know. Obviously it's playing nicely enough to run framebuffer console output properly, but beyond that I have no idea. I'd really like to get this working - it'd really improve things over the GeForce 6600 it came with...
I'm trying to install Ubuntu (or Xubuntu) on a PC that has integrated on board video. After that I want to disable the onboard video and use an NVIDIA GeForce 8400GS video card.
I tried it before, and got a lot of resolution problems.
This is what I did:
- First, I put the card in the PCI slot and modified the bios to use it as the default video, and booted from the ubuntu CD. The installation did not go through as I got no screen output (I guess ubuntu did not recognize my video card).
- Second, I restarted and modified the BIOS so that the onboard video was the default. This worked when I booted from the CD and installed, I got screen output and all. I completed the installation and turned off the computer.
- Third, I installed the card on the PCI slot but did not change the BIOS, booted and used the onboard video, downloaded the NVIDIA driver (190.53) from the NVIDIA website, installed it, and turned off the PC.
- Fourth, I modified the BIOS so that the NVIDIA video was the default, plugged the monitor to the NVIDIA VGA output, restarted, and got ubuntu working at a very low resolution of 640*320.
This is where I am stuck. I can't change the resolution to 1024*768 or 1366*768. I only get 640*320.
Is there any way to avoid all this and do a fresh installation of ubuntu 9.10 with the NVIDIA card already in and as default on the BIOS?
I am thinking the resolution problems started because I got video drivers mixed up with intel onboard during installation, then NVIDIA. I guess I should have removed the intel drivers first before installing NVIDIA drivers. If anyone agrees, how do I uninstall Intel video drivers?
If that is not the case, how do I configure the NVIDIA drivers to work properly?
My PC is an older IBM 8303 KKU at 2.26GHz, with 2GB RAM, 40GB HDD, and a 512MB NVIDIA GeForce 8400 GS
I have a Lenovo W700 laptop, and have had SuSE 11.1 on it for over a year. Recently, I tried updating to 11.2 and then 11.3. Ever since I tried that, my laptop started shutting down because the graphics card (nVidia Quadro FX 2700m) overheats - when the temperature reaches over 120 degrees centigrade, the system auto-shuts down.
I tried doing a clean re-install of SuSE 11.1 but that didn't help.
I thought it might be a hardware problem, but I can boot the laptop in Windows and it runs fine there. The part of the laptop where the GPU is feels warm, but not burning hot, when running in Windows.
I tried installing nvclock to force the fan to stay on (some of the things I've read seem to indicate a problem with the fan control) but that says it doesn't recognize my card, and when I run it with "-f" it says the card doesn't have fan control.
At this point, I can either run Windows Vista on the laptop, or run Linux in text-mode only; I wasn't able to install a graphical system because it would overheat halfway through the installation.
After seven months of digging I've come to the conclusion that the problem is somewhere between kernel and X server. I've tried contacting several firends with guru-like experience, I tried looking for answers on FedoraForum, I asked a question there, and I even started a bug report where the blame keeps being passed around different components.
I thought the problem might be isolated to my system, as I wasn't able to find any concrete info on this. About a week ago, I finished a new build for a friend. The PC has an NVIDIA card (GTX460). I tried Fedora 13 on that computer and I noticed the problem there as well. Actually, it was more pronounced than on my system. You couldn't use the system (friend's build) for more than two hours.
I'd like to get a little feedback on just how spread this problem is. I'm trying to see if it's a problem with NVIDIA cards in general, with Fedora in particular, if it's confined to 64-bit systems, etc.
Whether or not you have this issue, please post about it. Please also post to indicate that you have no problem if that is the case. I'll start the first "report". Please state all the items in your report.
Video Card: Dual GeForce9800GT
Driver: nvidia (latest akmod-nvidia from rpmfusion) but problem also present with nouveau
Kernel: Noticed problem from 2.6.32 (earliest tested) to 2.6.34 (latest tested). I did not test with earlier kernels
Problem: System randomly freezes. In most cases, keyboard and mouse stop responding (CapsLock does not toggle the light on the keyboard). system stops responding to ssh and ping. A hard reboot is required On rare occasions, the ssh login is possible and restarting the X server usually revives the system.
I have a 64 bit computer with a 64 bit distribution of Ubuntu. The driver for the onboard video card wasn't supported beyond 8.04, so I didn't upgrade. Yesterday, I bought a NVIDIA GeForce 210 video card. I installed it and Ubuntu detected it and worked, but the resolution was limited to 640x480 (I think). I figured this would be corrected by updating, so I updated to 9.04. When I had to restart, the option to select which OS (Linux or Win) came up, I selected 9.04, and the ubuntu symbol came on. The status bar went to the end and the screen turned black, flickered 5 times, turned black and stopped progressing. The xorg.conf file is:
I just bought a new pc. It has plenty of hard drive space and ram with a 2.6GHz processor. I'm trying to run a dual-boot with Windows 7 and Linuxmint. I need some help as to how I go about installing my video driver. I have tried combinations of the following: -clicking on the taskbar icon that says "restricted drivers are available" and enabling the drivers -going to Software Manager/Drivers and choosing to install "NVidia 3D Drivers"
My efforts so far have only resulted in the following behavior: The screen changes from color into black-and-white and becomes unresponsive except to close it out The screen freezes up completely forcing me open up a terminal to kill the offending process (which turns out to be firefox)
The next thing I would like to try is to just go to the Nvidia website and downloading and installing the driver from there. It's a BIN file with a "run" extension. So I entered the command "chmod +x NVIDIA-Linux-x86-190.53-pkg1.run" followed by the command "./NVIDIA-Linux-x86-190.53-pkg1.run". But I get an error that says the following:
ERROR: You appear to be running an X server; please exit X before installing. WHAT IS AN X SERVER? HOW DO I CLOSE IT?? I've got nothing unusual open. Maybe a web page. I've tried closing out of everything except the terminal and I still get the same message.
I've got Ubuntu 9.04 Jaunty + lxde. My video card is Nvidia FX 5200 (Nvidia driver ver. 173.14.18). My monitor is a lcd Acer mod. x193w (widescreen). At present I cannot choose the 1280x800 resolution as I was used to when I was using Ubuntu 8.04 Hardy. Nvidia X Server settings offers several resolutions (included the native monitor resolution, 1440x900) but not 1280x800 as before. I wonder why. I even added mode 1280x800 in the Section "Screen" of xorg.conf but it was ignored.
I installed Edubuntu 9.10 on a Dell Optiplex GX260. This system has onboard INtell 846G series video. I want to install an NVIDIA video card. I popped it in the case, diabled the onboard video. I get the POST, the GRUB, no problem. But once I get past the GRUB, all I get is a blank screen. The HDD does not sound like Ubuntu is loading.
I intend to update my video card to allow the operation of all three of my monitors in a triple monitor configuration. I have a 790i motherboard with Nvidia chips, so I will most likely choose an Nvidia card for the upgrade. As I will need connections for three monitors, I will have to have two cards. It is my intention to have one large screen field spread across all three monitors. I assume the best way of doing this will be to use an SLI Bridge to link the two video cards. Thus the two video cards must be identical.
Question 01: Is this the best way of realizing a triple monitor setup?
While I am upgrading, I desire to also give the system the ability to play Blue-Ray High Def Movie one of the 1920x1200 monitors I will be using.
Question 02: What are the pitfalls of playing BD-Discs on Debian. I know I will be eventually acquiring a BD-Disc player (once the prices come down a bit more), but when shelling out for two video cards, I better think as far ahead as possible and get the two video cards that will do everything I can foresee them needing to do.
Question 03: As all of my monitors have HDMI input ports, I assume that I will need Video cards that have HDMI output ports to play full 1080P movies. Is this a valid assumption?
Question 04: Can anyone recommend a video card that does what I am wanting it to do? (This is to say Two Dual Link DVI connectors and an HDMI connector per video card with standard and high definition video playback capabilities). Keep in mind that I will most likely need to purchase two of them, to the Super Expensive Bleeding Edge cards are probably not going to be a practical option here.
Question 05: Is there a way that I can just play the BD-Discs with full resolution in a window on one of the three monitors I will have connected to the computer without having to go the HDMI route?
I just installed a nvidia TNT2 m64 video card on my AMD 2500+ Ubuntu Linux 10.04 on Gnome 2.30.2. (yeah, it's old). I'm trying to install the proper driver, but system>admin>Hardware drivers says there are no proprietary drivers enabled. nVidia synaptic packages installed (settings; common; modaliases 96, 173, current; xorg video). I used to have the same, or nearly the same card working great before some a**hole stole it. How to configure?
I've tried to enable the drivers for a Nvidia 8400GS video card on Ubuntu 10.04. I've tried change desktop background > visual effects. It tells me Desktop effects can't be enabled. Sudo jockey-gtk looks and tells me no proprietary drivers are in use by my system. I've tried installing from Nvidia's site and that seems to go okay but doesn't seem to work. I have an internal video card that can't be turned off in BIOS )either ON or AUTO) that might be causing me problems.Lspci:Quote:
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
I have a video card. But I cannnot install nvidia driver because of some errors.
My video card's info is GeForce GTX760 1.5GB GDDR5. Code: Select all$nvidia-detect Detected NVIDIA GPUs: 01:00.0 VGA compatible controller [0300]: NVIDIA Corporation Device [10de:118e] (rev a1) Uh oh. Your card is not supported by any driver version up to 304.125. A newer driver may add support for your card. Newer driver releases may be available in backports.
NOTICE: Some very old nVidia Video Cards from more than 9 years ago might not work with this way, but just try this method because you'll see if there's a driver available for your video card in Fedora or not.
I have been noticing that it was hard to set up my own NVidia video card, and alot of other people shared the same problem as I had. I have been experimenting with some things, and here's what I did to solve it.
It's fairly easy, anyone can do this. Read and follow these instructions:
Install all updates. Although it seems unimportant, it really is.
Go to [url] and follow the instructions to install the free and nonfree repositories
Go to System > Administration > Add/Remove Software
Search the following: nv
Click everything which has to do with NVidia. Do not check the checkboxes yet, but read the descriptions. If you've found your video card in the description, check the checkbox at the left of the title.
Install the drivers by clicking "Apply" at the bottom of your screen.
After installing, go to Applications > System Tools > nVidia Display Settings
Set the properties of your video card, such as TwinView or higher screen resolutions.
After you've set it up, click Apply to preview your settings. Change some settings if you like, and then click Apply when you're done. DO NOT EXIT YET!
Click "Save to X Confguration File, but do NOT save the file. Click "Show preview..." and copy the text in the preview.
Go to Applications > System Tools > Terminal and type "su". Press Enter and enter the root password.
Now type:
Code:
Select all of the text in the document and delete it. Then, paste the text of the "Save X Configuration" window into the text editor.
Exit out of the terminal.
Exit out of the nVidia Display Settings application. Do not save anything from this application.
Log out and log back in to see the changes.
If you want to change some settings, repeat steps 7 - 16.
How is OpenGL support (specifically OpenGL 3.x) in the different video card drivers available for Linux?Assuming that the hardware supported it well, would the drivers be an issue?
I am try to install the nvidia 96.43.16 driver for a Gforce 2 MX-400 video card following this [URL].. When I ran the 'rpm -e --nodeps xorg-x11-Mesa-libGL' command the the package wasn't installed.
When I ran modprobe nvidia it wasn't found either.
I am planning on upgrading the video card in my computer, an NVidia GeForce 9500 GT video card, to something that can handle at least 1600x1200 24-bit resolution without noticeable choppiness other "slow-downs" in graphic display. The card in question does have one gigabyte of RAM, but the type of memory it utilizes is DDR2 instead of something, i.e. DDR3 and above, with greater speed. Admittedly, the system in question is used for gaming as well as work. I want to stick with the NVidia brand because it has worked well for me, but I am not sure what would be the correct line of cards to use.
I just got done installing Ubuntu on a new harddrive and set it up to dual boot with grub loader. However, when I boot into Ubuntu, the screen goes black. I can however login (blind) by hitting enter and typing password. The login sound goes and it logs in, however, the screen stays black. I am running a NVIDIA Quadro NVS 295 Video Card.
I use a debian testing, I can't drive graphics card，open source driving performance is not good, so you need to closed source drive, model is nvidia 7300 gt, how to drive the video card?
I have a Geforce 9300 GS installed in my machine I am using 64 bit Gnome with a 64 bit system I downloaded this: Now my video won't show any effects and the Nvidia card won't work? This doesn't make any sense. Frustration to the max. I should have stayed with Fedora 10 at least it worked with downloadable drivers.
I have repeatedly installed CentOS 5.5 64-bit on a Dell T3500 with an nVidia Quadro FX 580, in an attempt to get dual monitor support to work to no avail. Everything works fine when just one monitor is plugged in and I do not try to enable or plug in a second monitor. I have installed the Dell DKMS, and the Dell recommended drivers (from Dell site) on one installation, I installed the nVidia drivers (from nVidia site) on another, and have tried with what CentOS loads by default on another. The results are the same every time: When I reboot as directed I get a black screen. I can recover by hard shutdown and unplugging one of the monitors, but that doesn't solve my problem. Has anyone had a similar experience, or have any helpful guidance? I am not very Linux savvy. This is for multiple machines in a corporate environment.
Information for general problems.
== BEGIN uname -rmi == 2.6.18-194.26.1.el5 x86_64 x86_64 == END uname -rmi == == BEGIN rpm -q centos-release == centos-release-5-5.el5.centos == END rpm -q centos-release ==
Using the video card Nvidia 7800GT on an AMD4200, MB T6100, I am unable to install from the iso, as progression is halted by a video mode that is unviewable. (black and white rows). I can get to the "f6" menu, however once I attempt an install it fails. My main goal is to install Mythbuntu, however the problem seems to be with the Unbuntu install drivers.This post worked to get around this on version 6.10, however these instructions no longer work. http://ubuntuforums.org/showthread.php?t=379807
Is there any way to use the newest Nvidia drivers that should work from a new install CD? I do not see a command line option, which would seem to allow me to install and update and setup the distro, THEN add my drivers before I run xconf.
I am trying to get my Debian system running. I have an older Dell Precision 490 with two dual core CPUs. It has 16G Ram, an 150G Intel solid state drive, a 230G data drive, and a 600G backup drive. I have two Samsung monitors attached to the NVIDIA Geforce FX 5xx card. I have been using this machine for several years with Etch, then Lenny, running KDE 3.5. I recently needed to upgrade to Squeeze and KDE4 and have had nothing but problems since. I keep having issues with the video drivers, every time I touch anything the drivers seem to upgrade from the legacy 173 to the current 195.
There have been other library compatibility issues as well (gclib) and the machine has not been stable. This morning the system was running very slowly with X running at 100% (from top) and then the entire system froze. After a hard reboot, X did restart. The Xorg.0.log has the following message: "Failed to initialize the NVIDIA kernel module! Please ensure that there is a supported NVIDIA GPU in this system, and that the NVIDIA device files have been created properly..."
I have managed to work out how to install my NVidia video card driver. I'm just about to tackle getting the microphone aspect of my sound card in my laptop going. If that goes alright I'd like to install the Wacom drivers for my Cintiq 21ux.
I have sound coming out of my sound card, I just need to put some sound through it (for skype conferences)
Do you where I'd be able to find the right drivers or links to tutoials about or similarto my HP Pavilion dv5 1006tx?It's mainly the sound card and Wacom Cintiq 21ux I'm worried about.
