Hardware :: Cent 4.7 Does Not See All CPU After CPU Upgrade
Jun 10, 2009
We recently went from quad dual core AMD chips to quad quad core chips (16 cores total) After upgrading the CPUs Cent 4.7 only shows 8 cpu in /proc/cpuinfo it should show 16. Has any one run in to this issue before? It's not hardware related. I had this issue on another box and it was resolved by reinstalling the OS which I can not do on this box. Also I have verified that the CPUs were installed correctly, during POST the box shows all 16 CPU.
View 10 Replies
ADVERTISEMENT
May 7, 2009
i am running cent 5.1 and would like to upgrade httpd v.2.2.3 to the latest 2.2.11 version provided by apache to resolve some ajp errors i am experiencing.
I searched but did not find any rpms for cent nor did i find any instructions on how to do this.
View 10 Replies
View Related
Feb 15, 2010
i want to install yum in centos 5.4-i386 on amd system,buti am unable to do so, i can do yum installation in linux os very easily but in centos it is quit different .my ip is 192.168.0.55after this command
cp /etc/yum.reposed/CentOS-Base.repo /etc/yum.repos.d/base.repo
i did edit in this file
vi /etc/yum.repos.d/base.repo
[code]...
View 14 Replies
View Related
Oct 4, 2010
Installing this on an old Pent II 350 MHz machine. Ethernet card has a RTL8029 chip on it.
Install went well. During boot the statement "Determining IP information...fails" No IP is assigned to the NIC. I have DHCP running on my linksys router. Should not be an issue.
In a default install, will Cent OS 4.7 normally get the NIC setup with connectivity or is there further config work to do on setting up routes and iptables(firewall) ?
View 14 Replies
View Related
Apr 16, 2011
I'm playing with moodle on my CentOS Linux x86_64 server and well I got this: Sorry, Moodle 2.0 requires PHP 5.2.8 or later (currently using version 5.1.6). Are you able to provide me tutorial how to compile from source new php or some working repositories for this. I couldn't find anything decent and working...
View 2 Replies
View Related
Apr 29, 2011
I want configure IMSpector on my Cent OS box.
View 4 Replies
View Related
Apr 13, 2010
I had configured my php to use sendmail as its mail agent. My server which is centOS 4.6 in this case runs in a lan.
What I need is that when i fire a mail function from php page hosted on my server in LAN, mail should get delivered to gmail or whatever destination address is..
But I am facing problem...When I open my php page which fires the mail, it takes long time to load say 1-2 minute in loading. After that it says Message sent successfully, but message not get delivered.
I had checked sendmail it is running... I also checked spam folder of destination email..
View 3 Replies
View Related
Feb 18, 2011
Installing VNC in Cent OS 5 / RHEL 5? Check the below link... [URL]
View 1 Replies
View Related
Dec 26, 2010
I have read in the release notes that there is no SuSe Linux (SLES 10) support in Cent OS 5.x KVM or even for that matter in Xen.
Does that mean SUSE will not run at all or will there be nobody to support me? A complete YOYO scenario!
Does anyone have experience with running SuSe on CentOS KVM?
View 2 Replies
View Related
Jan 10, 2011
I have written Ram Disk Driver for Cent Os 5.3. but after inserting it into kernel system hangs. What is problem? I am running cent os on Virtual Machine. Is it because of VM?
View 2 Replies
View Related
Jun 11, 2011
I'd like to download Cent 5.6, but I'm a bit confused on which ISO I need to download. I can't use any of the torrent files since my company FW won't allow it through. So, should I download the Live CD or ISO 1 through 8? Can I install the Cent from the LiveCD? If I decide to download ISO 1 through 8, how do I then combine them?
View 5 Replies
View Related
Nov 20, 2010
I can not use my USB Magic Jack on my Linux Cent OS 5 final. i also on try on ubuntu 10.10.
View 3 Replies
View Related
Jul 6, 2011
I have been trying to download the CentOS 5.5 DVDs. I have tried the ftp mirror and the http mirror and do not come up with the same checksum as is displayed. I am getting the following. I get the following sums:
ac177a5476e3b255b89b659e5b10ba03 *CentOS-5.5-x86_64-bin-DVD-1of2.iso
083746ba5c809df09582fa973c93c594 *CentOS-5.5-x86_64-bin-DVD-2of2.iso
View 4 Replies
View Related
Jun 4, 2011
I am trying to install vlc in cent os 5.5 but while configuring through (./configure) command as a root i am getting error no acceptable c compiler found in $path.
View 4 Replies
View Related
Mar 2, 2010
i moved from ubuntu to cent-os recently,however i am not able to connect to internet, even ifconfig dosent work .
View 4 Replies
View Related
Aug 10, 2011
I want to implement ticketing system on cent OS 5.5 for internal use, i.e when user is having any problem in their system, they will rise a ticket with its number and we will close that number after we fixing the issue. So could anybody please provide any use full url links to implement it?
View 5 Replies
View Related
Apr 26, 2010
I want to run ubuntu and centOS on vmware player.I have ubuntu9.10 already installed on my system.which version of vmware player should i install to make it work.
View 1 Replies
View Related
Apr 9, 2010
When i issue the command "service sendmail start", it just shows me "starting sendmail..." and waits forever. please have some point on it.
View 4 Replies
View Related
Jan 21, 2011
I am trying to learn DansGuardian for content filtering, but for some reasons it is NOT working for me. equest is directly getting routed to SQUID, it should come first to DansGuardian and then to SQUID.I have created the below scenario on CENTOS 5.5 boxes.
Code:
192.168.0.10box1.test.comYUM/HTTP SERVER
192.168.0.20box2.test.comYUM/HTTP CLIENT, SQUID SERVER
[code]....
View 4 Replies
View Related
Sep 28, 2010
I have a cent 5.5 server that I only have remote access to. I was wondering if there was a way to view potential updates before I issue the yum update command. I know that there is a notification in X that you can click on and will show you the updates before you actually perform the operation.
View 2 Replies
View Related
Oct 1, 2010
We have AMD 64 Bit server with Adaptec SATA RAILD contoler, while load Cent OS 5 at Sendmail level it's hange . It is giving SCSCI hang error.
View 2 Replies
View Related
Feb 3, 2010
how to install dhcp server up & running in cent os 5.3
View 2 Replies
View Related
Oct 31, 2010
I can configure openldap on suselinux or Cent OS but i need to a simple script that can doing it automatically (in simplest case).
View 1 Replies
View Related
Jan 7, 2011
I work at a small animation studio with a server box running Cent OS. We have no IT guy... I happen to know a little bit of programming so I got assigned to look after this server box. I'm still in the process of learning basic linux using VMware at home at themoment.There are few things requested from me that are really beyond my knowledge at this time and I really need some advise or pointer to get started.Current set up- We have 2 servers. A windows server 2008 and a Cent OS. They don't work together... They are only acting like a central "hard drives" so to speak.
- Cent OS was a new addition to our team. It was recently requested by our client. They set up RSync for us to get files from over sea and they want our file structure to match theirs.- We have 15 work stations. Not set as domain yet. We boot into Windows 7 for projects stored on windows server, and boot into Fedora for projects stored on Cent OS.What I was asked to do- Centralize user accounts. My boss wants both windows and fedora to log in using the same account. What would be the best approach to do this? We want the accounts to be managed via the Cent OS box. Permission to access hard drives on the server should be controlled as well.- Maximize Rsync. This one is really beyond my knowledge. The Rsync process from our clients sometimes doesn't go through. They want to make sure the process works as smooth as possible.
View 4 Replies
View Related
Jul 15, 2011
My network become inactive but on GUI show that network active. When i ping out the network, is response times out. I need inactive the network and active back but sometime also fail reactive it. What main problem. CentOS running on vmware
View 1 Replies
View Related
Jun 8, 2010
Suddenly my machine not working under run level 5 and it seems to be problem with xserver and it is saying that "in last 90 seconds xserver restarted 6 times and unable to start" and then just giving blank screen.So i changed the run level to 3 and using startx command i am managing to work now.
View 2 Replies
View Related
Jan 22, 2011
I have 500GB external HDD. I have to mount it my CenOS -4.8 Machine.(kernel-2.6.9.89EL 32-bit) . External HDD partitions are ntfs file system partition. I have tried to mount ntfs partition in linux . But it's not done.
mount partition with ntfs parttion in linux.
View 3 Replies
View Related
Dec 7, 2010
i have a dell server. its a couple of years old and has a perc 4 raid controller in it. When i do an install it shows the drives configured in the raid 5 configuration. i select the disk and do an auto partition. It goes for about 10min then errors with "error formatting drive volgoup00 the error is serious occurred press enter to reboot" or something like that can remember all the words. It doesn't give any info about the error.
i get the same error on centOs 5.5 and Ubuntu server 10.10
There is a firmware update for the raid controller that i could apply but dell's site was not letting me download it yesterday. Other than that I am not sure what to do. I could try an older version of CentOS 5.4 but i figure someone might tell me how to fix this so i can run the newest version.
View 2 Replies
View Related
Apr 30, 2010
I would like to setup a qmail server for learning purposes (if you strongly feel Postfix is better, feel free to let me know). When I started setting up qmail (using Life with qmail), it suggested that having a DNS is the best approach. In the spirit of learning, I decided then to create another server for DNS only, and use that for qmail.
My problem is that, as this is a home installation, the internet is behind a Netgear DG834Gv5 router, on a DSL line that has a dynamic IP address. I am using DynDNS, but also don't mind having to update any DNS entries to keep up with the change, this is not exactly a production-grade setup.
In addition, I also have access to another DNS server where I can create authoritive entries for any domain I register. I have done that for a domain, and would like to point part of that to my home DNS so that I can learn.
So essentially, I would like to have a new zone for home.mydomain.org on my home DNS so that I can create new entries for *.home.mydomain.org such as qmail.home.mydomain.org etc. there.
I assume that this would include port forwarding on the router which is not a problem, but I truly have no clue where to start. I have a very basic install of Cent-OS 5.3 (no X and just Base a few admin and dev tools) and just installed the latest RPM of bind (9.3.x).
View 2 Replies
View Related
Aug 1, 2009
I have 2 server behind the netgear router on my network . win2k3 and CentOS development server, I have port forarded 80 to win2k3 server which i can access over the internet and is accessable. However I can SSH CentOS machine and portforwarded 8080 and 82 for web access, I can't access via any of the port, browsers says UNABLE TO CONNECT.. there is no firewall in CentOS machine.
View 1 Replies
View Related
