General :: X11 - NVIDIA-Linux-x86_64-280.13.run Screwed Up Sound?
Aug 24, 2011
I just installed nVidia GT440 w/ NVIDIA-Linux-x86_64-280.13.run driver on my Scientific Linux on two of my workstation and one of workstation sound disappeared. Both workstations are identical though in terms of hardware and OS (Scientific Linux).
I'm not really sure where to look, but here is dmesg from workstation where sound isn't working:[URL]..whenever I go to System -> Preference -> Sound -> Output on broken workstation I only see "HDA NVidia Digital Stereo (HDMI)" and my old/onboard sound card is missing.
I actually did roll out of same Video Card to more then just 2 workstation, I did that to a 5. Only 2 of them sound working as expected. 1 of them didn't even needed to install nVidia drivers but that workstation running slightly newer OS version 6.1 instead of rest 6.0, so I'm back to where I started it ... clueless ;(
View 1 Replies
ADVERTISEMENT
Apr 19, 2011
I have motherboard Gigabyte GA-M61PME-S2P with nvidia hda sound card and I have no sound output using line in input. I've already tried to compile actual realtek linux driver but it didn't help. It looks ok because using gnome-volume-control I can see that there is music - volume bar is moving - and I can record it but I can't hear that on speaker live. I have also only 2 channel output hardware configuration. Alsa mixer have all channels but changing volume adjust didn't help. some information:
[Code].....
View 6 Replies
View Related
Aug 3, 2010
Attempting to compile an application that is not located in any of the repos yet for 11.3 64 bit. I have downloaded the appropriate src and untarred it. However, when I attempt to run the ./configure command here is the error I receive. checking build system type... Invalid configuration `x86_64-unknown-linux-': machine `x86_64-unknown-linux' not recognized configure: error: /bin/sh ./config.sub x86_64-unknown-linux- failed
I have made sure that I have all kernel-headers packages installed and am unsure as how to proceed. I tried using the command "./configure --build=x86_64" and then receive an error stating that the "SYSTEM IS NOT SUPPORTED" and continued errors stating that gcc is not installed, eve though it is.
View 5 Replies
View Related
Jun 22, 2011
I am using Firefox 4.01 on GNU/Linux x86_64. Is there any reason why there is no autoupdate? In fact, when I look at the "About Firefox" dialog, it just says "Updates available at [URL]
View 2 Replies
View Related
Feb 12, 2010
I installed compiz with nvidia trouble is when I run compiz white bars or lines (bars) appear in open windows (icewease, gedit, etc.). They disappear after a few moment and reappear when scrolling a page. BTW everything works fine with metacity running as window manager.
Here is my xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (randy@juliet2) Fri Sep 5 15:03:39 PDT 2008
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (randy@juliet2) Tue Jun 24 10:44:02 PDT 2008
Section "ServerLayout"
Identifier "Layout0"
Screen 0 "Screen0" 0 0
InputDevice "Keyboard0" "CoreKeyboard"
InputDevice "Mouse0" "CorePointer"
EndSection .....
I have the nvidia driver 173.14.09 installed. Running Debian Lenny stable x64 and turion x2 with a geforce 8200M G graphics card with dual screens. I first installed the debian repos compiz, then upgraded to the tuxfamily repo version. I installed the nvidia driver 190 from nvidia's website and that fixed it!
View 2 Replies
View Related
Jan 7, 2010
I can't find kmod so I'll go for the Nvidia installer from [URL]. I tried to run it Quote: su -c 'sh NVIDIA-Linux-x86-XYZ.AB.pkg1.run' but it wants me to kill xserver. How can I do that? " gdm stop" will kill Xserver too? How will I start it again?
View 3 Replies
View Related
May 22, 2011
I am new to Linux and have a lot to learn.Since loading Linux I have no sound on my computer.
View 2 Replies
View Related
Feb 16, 2010
I've installed Linux Mint7 (Desktop PC, Dual booting with WinXP) and most of my 'system notification' sounds work fine, with the notable exception of the 'Shutdown' sound. (All I get are several 'beeps' from the PC speaker.)When I run Mint from a live CD, I don't have this problem at all.(I'm quite new to Linux and completely new to asking questions here, so apologies in advance, if I've left out any vital info.!)
View 6 Replies
View Related
Apr 12, 2011
I just responded to a (packagekit?) prompt to update packages, which included new kernel 2.6.35.12-88.fc14.x86_64. I use nVidia on my notebook and usually the new driver is installed automatically. This time, the computer would not boot to the stage that the nVidia logo appears, indicating the driver is not present. I edited grub.conf to take me back a version and I am now running under the previous kernel 2.6.35.11-83.fc14.x86_64. I tried a yum search for kmod-nvidia-2.6.35.12-88.fc14.x86_64 and nothing was found. I have enabled these repos:
[Code]...
View 4 Replies
View Related
Jan 23, 2010
I'm having an issue where the proprietary nvidia driver seems to crash my system. the weird thing is that it only happens if i have already started an X session. here is what i mean. i don't use a display manager so i invoke X by running startx. now if i run it for the first time it starts no problem. but if i kill X with ctrl-alt-backspace and then try to run startx again it just hangs and the machine completely freezes up. this only happens with the proprietary nvidia driver. if i use the vesa driver it works fine. the open-source nvidia driver doesn't seem to support my card: GeForce GT220. i never had this problem with slackware 13 x86. i have tried using the 190.42 version from slackbuilds.org as well as the latest version from nvidia's site 190.53. aside from this problem it seems to work fine otherwise.
View 14 Replies
View Related
Nov 13, 2010
i had installed open suse linux enterprise server 10.2 SP2 (x86_64) i successfully installed the operating system with adding more packages, but after going inside i cannot configure ethernet, though i have 2 ethernet ports, no ports has been found, i installed some drivers but i cannot found the ethernet , while giving command ifconfig i get this ,
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
UP LOOPBACK RUNNING MTU:16436 Metric:1
[code]....
how i need to detect the ethernet card i updated more packages and configured network card but not connected...
View 2 Replies
View Related
Nov 9, 2010
I'm installing x86_64 F14 on my Lenovo T61p, but I'm missing the i686 xorg-x11-drv-nvidia-173xx-libs in rpmfusion. Am I the only one or Is there a reason?
Edit: wine 32bit and Google Earth for example need them....
View 1 Replies
View Related
Dec 8, 2009
Just got the latest kernel update 2.6.31.6-162 for fedora 12 64bit and it won't boot on my PC. I just get a black screen with some text that doesn't mean anything to me. Computer is a s775 E7200 with nvidia 730i/9300 integrated graphics. I am NOT using hardware graphics drivers at the moment, having decided to stick with Nouveau drivers for a time. What system log tools do I need to identify the problem?
View 2 Replies
View Related
Apr 29, 2010
I'm having no sound and no flash workin on my newly updated F12 kde x86_64 desktop, I could get back sound by yum removing pulseaudio, but installing flash ( thru mjmwired instructions), get pulseaudio back installed.
View 3 Replies
View Related
Sep 29, 2010
I am using amarok-2.3.1-32.1.x86_64 kde45 repo 11.3 Tried OSS version too All other audio functions. Using Clementine ATM which is great.
View 4 Replies
View Related
Dec 16, 2010
I had a opensuse 11.1 X86_64 system with openoffice. This has been replaced by an opensuse 11.3 X86_64 system with openoffice 3.2.1.4. I have many pps files and these worked complete with sound on the 11.1 system but there is no sound on the 11.3 system. The 11.1 system has gone and was overwritten by Windows 7 so I can't verify the build. I know I made lots of changes to the 11.1 system in order to fix various problems and openoffice could well have come from a factory repo.
What I need to know is what is needed to make impress play pps presentations as it did on 11.1 and does on windows 7. I searched on the internet and it appears that the novell version of ooo may use gstreamer. I have loaded many gstreamer packages from packman including plugin-good but still get no sound. Starting impress from a command line does not produce any error messages.Does the novell openoffice use gstreamer or java multimedia? I have not yet tried the java option I could try downloading the novell openoffice source and try to work out what it is using. I am not sure that I have the time to go searching through the source and probably trying to compare it to the ooo source
View 9 Replies
View Related
Jan 19, 2010
I have followed the opensuse sound troubleshoot pages and can't get it to work. The onboard sound does work in Sudix, out-of-the-box so I know it's not me plugging in my headphones in the wrong socket. Maybe Sidux works because it's newer? I did update opensuse 11.2 before I started again and I did install the new alsa, but that still didn't fix it, I only installed the latest stable build. Is there a development branch that may support my sound card? Anyway, here is the vital info:
[Code]
View 8 Replies
View Related
Nov 23, 2009
I am unable to get audio from flash videos on sites like ...... When I run firefox from the command line I get the following output.
> firefox
*** nss-shared-helper: Shared database disabled (set NSS_USE_SHARED_DB to enable).
ALSA lib conf.c:3009snd_config_update_r) Cannot access file /etc/alsa-pulse.conf
ALSA lib pcm.c:2205snd_pcm_open_noupdate) Unknown PCM default
ALSA lib conf.c:3009snd_config_update_r) Cannot access file /etc/alsa-pulse.conf
ALSA lib pcm.c:2205snd_pcm_open_noupdate) Unknown PCM plughw:0,0
I have tried reinstall of alsa, libasound. I was having 32-bit flash player; but there was no sound. Now I am using 64-bit flash player from adobe website, yet no sound still. I do not have pulseaudio. The file alsa-pulse.conf does not exist. Somehow, my system thinks there is pulse while I have it uninstalled.
View 9 Replies
View Related
Dec 21, 2009
if anyone of you have shifted using Paid Red Hat Linux with CentOS, and what are your experiences of moving from Paid Linux to Unpaid Linux CenOS. When do you suggest a person use Paid Linux and when to use Unpaid Linux?
View 1 Replies
View Related
May 5, 2010
i would just like to verify that the command
lspci would show the FC adapter installed
is there any other command that i can use to verify the FC adapter is being installed
View 4 Replies
View Related
Mar 19, 2010
Running Ubuntu 9.10. I was messing around with gdm/kdm and now BOTH of them are screwed up. It boots into "rescue" mode but none of the options work...not even droping into a console (the screen just goes black) I've also tried pressing CTL+ALT+F[1-9] ...still can't get a console. I AM, however, able to boot from the live CD and mount /dev/sda1 and...
Code:
root@livecd# chroot /mnt
Unfortunately...
Code:
root@chroot# dpkg-reconfigure gdm
Doesn't work...SO I tried using apt-get to reinstall gdm...the only problem is when I try getting the network up in the chroot enviroment I get an error saying.
[Code]...
View 5 Replies
View Related
Feb 12, 2010
I want to Migrate my C++ Application from SuSE Linux to Red Hat Linux.What impact analysis i should do?
View 3 Replies
View Related
Apr 14, 2011
Months ago, I tried to get my notebook's internal modem working, by installing alsa-driver-linuxant-1.0.23.1-1.noarch.rpm and hsfmodem-7.80.02.06x86_64full-1.x86_64.rpm, both from Linuxant. This did not work, but my system was stable and the sound device (Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)) worked fine.In the last few days, I upgraded to the latest kernel 2.6.35.12-88.fc14.x86_64. Boot failed due to an inability to build the alsa-driver-linuxant against the kernel source (I have the kernel source in /usr/src/kernels/2.6.35.12-88.fc14.x86_64/). The message in boot.log was:
Code:
ERROR: Build failed. Please review the build log at /var/run/alsa-driver.1367.log.
/var/run/alsa-driver.1367.log contains the error:
[code]....
View 4 Replies
View Related
Sep 15, 2010
Is it possible to let users create the directory or files but only user "yat" can delete them.suppose other users are geller ross joe from group FH , who have privileges. whenever these users create file or dir , they should not able delete it.BottomLine: Group users should create file but should not be able to delete them.By the way using sgid bit didnt help .
View 14 Replies
View Related
Mar 14, 2010
My new computer loads the i915 video driver by default, which seems to disable normal VGA VESA and FB modes.When I use an svgalib client in VESA mode the screen gets screwed up. I can't recover. I have tried savetextmode & textmode, but those don't help. Everything else continues to work. I have to shutdown and restart to restore a normal screen mode.
View 5 Replies
View Related
Mar 17, 2010
how to share a folder from linux to linux systems and setting password to open that folder
View 14 Replies
View Related
May 4, 2009
The only user that can make the sound card work on a F10 x86_64 system is root. For non root users, I am not seeing any error messages when a app tries to use/access the sound card, just nothing plays. As I said, for root everything works as expected. I am sure this is a permission/setup issue, but I have no idea where to start.
View 3 Replies
View Related
Feb 11, 2011
This is the hard way to learn when you MUST use visudo. That's right. I did something stupid like:Quote:$ sudo vi /etc/sudoersand now have:Quote:
$ sudo
>>> /etc/sudoers: syntax error near line 79 <<<
sudo: parse error in /etc/sudoers near line 79
[code]....
View 3 Replies
View Related
Sep 1, 2010
Fedora (2.6.34.6-47.fc13.x86_64) I installed that update, during the installation process it said that it had to remove three packages, one of them was kmod nvidia for the old kernel (Fedora (2.6.33.8-149.fc13.x86_64))After the update finished installing the new kernel, I restarted the system and Nvidia did not load. (I assume because Update manager removed the old nvidia? But I also assumed that a new version would be installed automatically?)I received the following Boot messages:
Code:
Entering non-interactive startup
Starting monitoring for VG vg_user1: 3 logical volume(s) in volume group "vg_user1" monitored
[code]....
I'm confused, if Update Manager removed kmod nvidia, then why does yum say it is installed? And why doesn't the new kernel update work with that version? Or should I install a driver version for that particular kernel? I've read while searching that I need to install a kmod-nvidia for that particual kernel version and that I should login to my previous kernel until that happens, is that the problem I'm having?
Why don't rpmfusion and fedoraproject release the kmod-nvidia and kernel updates at the same time to avoid problems such as this? Does anyone know how long does it usually take for rpmfusion to release the new kmod-nvidia driver for the latest kernel?
View 5 Replies
View Related
Jul 21, 2010
I would like to know if anyone has installed the latest NVIDIA driver on Ubuntu 10.04 (64-bit) which is 256.35 (x86_64).
I am currently having some problem (unstable) with the previous release 195.36.31 (x86_64) and am now considering updating; but, am still reluctant because of possible problems during the installation process.
View 6 Replies
View Related
