General :: Windows - Urxvt Flashes When Running Over SSH On Xming?
Feb 1, 2010
I have a windows 7 computer running Xming 6.9.0.31. I connect to my linux box running Ubuntu Server 9.10 with plink and run urxvt. It starts up and works perfectly however the urxvt screen flashes the xming root window about twice a second.This makes urxvt impossible to work with.Everything else that I have tested over the ssh connection (xterm, xfce4-terminal, etc) work perfectly with no flashing and this same problem has happened with two other linux installations (again only with urxvt)
View 1 Replies
ADVERTISEMENT
Nov 22, 2010
The application is Ericsson CDMA C-EMS V1702 and the tool allows a user to remotely log into an Ericsson/Nortel CDMA Base Station Manager server at a Mobile Telephone Switching Office.I hope I can explain this well, I will include screen shots:Here are the steps I follow:[URL]
View 4 Replies
View Related
Feb 3, 2011
I've been spending sometime trying to setup anclient on windowso access my fedora serverI'm currently using xming but there's no way whatsoeverme to make gnome available remotely. The closest I got was to open a standard X session with no icons but just a terminal.Is there any quick sanity check I can do before spending more time on this
View 2 Replies
View Related
Apr 23, 2010
I currently have two computers at my desk, 1 is Fedora 12 and the other is Windows Vista. I am using the synergy client to share mouse/keyboard but I would like to run Xming which is a Xserver for windows to display on my Windows machine. I have 3 monitors 1 is connected to the Linux machine and then I have 2 connected to the windows vista and I want to share 1 one using a windows Xserver. I have the server installed and setup on my windows machine and I just curios on how to configure my Xorg.conf file to use my Xming Xserver as a seccond monitor.
View 3 Replies
View Related
Jun 21, 2011
I am using XMing+Putty to access a Linux machine from an XP32 machine. I can copy text from windows and paste it to Linux fine, but I can't copy from Linux and paste to Windows consistently. If I try several times (or hold down the paste keystroke) it will eventually paste; sometimes several times!
I would like to improve the consistency of my Linux to Window pastes. I have per-mutated every combo of Clipboard and Clipboard2. I can not edit /etc/gdm/custom.conf like some other fixes suggest. I have been informed the Linux admins will not allocate resources to resolve this problem in the near future so any fixes need to be Windows side or able to be done without root/admin privileges.
View 4 Replies
View Related
Feb 26, 2011
Now I am using fedora14,my desktop is Gnome,my terminal is Urxvt.How can i change it to be full screen?
View 1 Replies
View Related
Aug 13, 2010
-cd command of urxvt doesn't work
View 1 Replies
View Related
Jun 27, 2011
In my Debian installation I can type extended ASCII characters such as åäö by default using the terminus font, however in Gentoo I can't get it to work so far. Nothing happens when I hit those keys, like in this thread:Missing glyphs in Terminus font, how to setup a fallback font ? But in this case I know terminus supports those characters in at least some of its versions, since it's works in Debian. So what I want is to find out how to see and choose which of the many different terminus font files is being used. I set the font in the same way on both Debian and Gentoo, using URxvt*font: xft:terminus:size=xx in .Xdefaults. Both systems use en_US.UTF-8 as default locale.
View 1 Replies
View Related
May 1, 2011
while amarok plays, a small window similar to a file copying status window opens and closes on continuously its own. anyone else having a similar problem?
View 1 Replies
View Related
Jun 22, 2011
I'm running Eclipse on a Linux server and I'm displaying it locally through xwindow forwarding using xming.Whenever I create something like a subwindow (like opening project properties or the Project Explorer when when pulled out of the main window), these windows are not resizable. When running natively on Linux, the resize is possible without a problem.
View 1 Replies
View Related
Mar 16, 2010
I am trying to play some .avi files and they open and run, but only the sound works properly. The video screen will flash about every 4-5 seconds.
I've tried Totem and Gnome MPlayer and both play these files the same.
View 2 Replies
View Related
Jan 29, 2011
I'd like to conserve as many resources as possible, with that being said, I'm switching from konsole to urxvt. After compiling and configuring my ~/.Xdefaults file as such.
Code:
URxvt*termName: rxvt
URxvt*scrollBar_right: false
URxvt*scrollBar: false
URxvt*borderLess: false
[code]....
Then I run
Code:
xrdb -load ~/.Xdefaults
By the way, running Slacware 13.1 x64 with Compiz. Still no transparency.
View 14 Replies
View Related
May 30, 2010
I have been mucking around with this for a couple of days and finally got Urxvt set with transparency and font spacing like I want. Does anyone else use Urxvt?
View 3 Replies
View Related
May 12, 2011
Problem with use of -hold|+hold on rxvt-unicode (urxvt) v9.09 on ubuntu server. On startup, I'm trying to launch terminal apps in urxvt automatically. E.g:
Code:
"urxvt -e /usr/bin/weechat-curses +hold"
or
Code:
"urxvt -hold -e mutt"
However, -|+hold does not seem to hold the terminal open. There is a flicker of a new window opening & then it's gone. I'm trying to invoke this from .xinitrc (startx-->.xinitrc) and also tried commands from inside awesome wm rc.lua (awful.util.spawn_with_shell("urxvt -hold -e mutt") seem to get same flicker result but closes immediately. I see this error in .xsession-errors, which might be relevant (do I perhaps need to specify the display??).
Code:
[1461:1634:41805904:ERROR:all_status.cc(117)]
Unrecognized Syncer Event: 7
E: awesome: a_xcb_io_cb:230: X server connection broke
urxvt: X connection to ':0' broken, unable to recover, exiting.
Code:
rxvt-unicode (urxvt) v9.09 - released: 2010-11-13
options: perl,xft,styles,combining,blink,encodings=eu+vn+jp+jp-ext+kr+zh+zh-ext,fade,transparent,tint,afterimage,XIM,frills,selectionscrolling,wheel,slipwheel,smart-resize,cursorBlink,pointerBlank,scrollbars=plain+rxvt+NeXT+xterm
Usage: urxvt [-help] [--help]
...
[-n string] [-sl number] [-embed windowid] [-depth number]
[-/+override-redirect] [-pty-fd fileno] [-/+hold] [-w number] [-b number]
[-/+bl] [-lsp number] [-letsp number] [-/+sbg] [-mod modifier] [-/+ssc]
[-/+ssr] [-pe string] [-blt string] [-e command arg ...]
Code:
~$ awesome -k
✔ Configuration file syntax OK.
link to urxvt man: [URL]
View 7 Replies
View Related
Dec 15, 2009
I have a openSUSE 10.3 box with kde and gnome on it.I can enter in Kde or Gnome from that machine but from remote (using Xming) I can enter only to the KDE.After I introduce the username and password nothing happens.Why I could not enter in the Gnome environment too?
View 5 Replies
View Related
Apr 23, 2010
I am trying to remotely access a linux machine to run Cadence from my laptop.I downloaded Putty and Xming/XLaunch.I run Putty, enable X11 forwarding, then sign into my host address.I am successfully able to access and navigate through my home directory, however once I try and run Cadence, I get the attached error.
View 4 Replies
View Related
May 6, 2011
I had Xming working great with XDMCP on my Debian 6 server at work. I had to replace the UPS and when I brought the machine back up xming/XDMCP no longer worked correctly. When I launch Xming and connect to XDMCP session I get the Xming window, the X Cursor but the GDM login window never appears. So I am getting some level of connectivity. The only change that was made to the server was that OpenVPN service was turned on. I do not know if this is the right log to be looking at but /var/log/gdm3/:0-greeter.log has this in it a number of times:
(polkit-gnome-authentication-agent-1:2252): polkit-gnome-1-WARNING **: Error enumerating temporary authorizations: Remote Exception invoking org.freedesktop.PolicyKit1.Authority.EnumerateTemporaryAuthorizations() on /org/freedesktop/PolicyKit1/Authority at name org.freedesktop.PolicyKit1: org.freedesktop.PolicyKit1.Error.Failed: Cannot determine session the caller is in
View 1 Replies
View Related
Mar 26, 2010
I'm installing a new server after this weekend, and it musth have both windows server 2008 r2 and linux (probably ubuntu) running, but I'm wondering which one of them I should run virtual. Windows will be used mostly for rdp and for serving asp.net webpages, linux will host some django-applications and a postgreSQL server etc.
View 3 Replies
View Related
May 11, 2010
I am writing an application that has a web service client on a Windows PC that needs to call a web service on a Linux server. In order to create the client, I need to be able to programmatically read the WSDL on the server and use it to create the client. I'm using the web tools in MyEclipse to build the client.
The Linux server is running Red Hat, I believe, with ssh enabled. I can connect from Linux to Windows with no problem, but I can't reach the Linux box from Windows. I get one of three errors when I try: no path to host, connection reset, or unknown error number, depending on the port I use. I've googled for an answer, but haven't found anything yet.Is there some way to add the Windows IP to a permission file on the Linux machine so it will be recognized when it queries for the WSDL?
View 9 Replies
View Related
Oct 28, 2010
I have a laptop running linux and a computer running windows 7, I would like to be able to send print jobs from my laptop using linux and not have to be physically plugged in. I tried adding the printer through samba and it doesn't work.
the specs are as follows:
[URL]
the message i got was idle unable to connect to cifs host will retry later. linux gave me two drivers and i have tried both previously, the print job seems to get lost in space.
View 4 Replies
View Related
Jul 7, 2011
I have a new install and my right touch pad button doesn't paste like on my other installs. Instead I have to use shift-insert. Does anyone know the keysym statement that can remap shift insert to my right touchpad button(laptop)?
View 1 Replies
View Related
Jun 5, 2010
I want to do two things: Set up a virtual machine on Windows 7 to run Ubuntu Set up a way for the virtual machine to read the windows disk or windows to have read/write access to the virtual machine's disk. My goal is to have a place where both Ubuntu and Windows can read and write. What software is good for this task? Are their free programs that can run virtual machines? Also if my machine is running Windows 7 64-bit, can I install Ubuntu 32-bit? Or am I forced to use Ubuntu 64-bit? Or does it not matter?
View 1 Replies
View Related
Dec 27, 2010
I am using on Windows Vista, Filezilla server. I have it set up to be accessed via outside IPs and when I use a client on the IP I have it connects normally using Filezilla client. On the same machine I have Ubuntu running in a virtual box and when using filezilla client in there it works fine. Now I want to try the command prompt. So I do the ftp xxx.xxx.xx.xxI enter the name and password and i get the ftp command prompt, but the commands are not working properly. when trying "ls" or "cd" these commands do not work. "cd" tells me that the current directory is "/" root, but this does not make sense in the windows operating system. Now the filezilla client is taking the user in the application window directly to the root folder of the permitted filespace granted to that user. How can the same be done from the command prompt, if there is a way? It is as if the command prompt takes me to the root which does not exist or even have correct permissions to move in. Is there any way to be taken to the correct directory directly, or move there especially when the slashes are the wrong way around etc?
View 1 Replies
View Related
Mar 22, 2011
I've set up OpenVPN on a Linux server. All my Internet traffic goes through the VPN from that server. I'm running Windows 7 at home. I noticed in Wireshark that DNS queries are not going through the encrypted tunnel, but instead directly to my ISP's designated DNS servers.
To overcome this, I tried pushing DNS for OpenVPN from the server to my computer, and also inputting the DNS address in my wireless adapter's configuration options. This appears to have secured the DNS leak, but is it the proper way to go about it? If I didn't push the DNS address from the server to the client and only set the DNS in the client's wireless adapter, then I couldn't visit any website. And if I just pushed the DNS but didn't set it in the adapter, then some DNS requests still leaked to the ISP's DNS servers.
View 1 Replies
View Related
Aug 9, 2011
We had an old Windows XP server running a Filemaker database on a 2.6 GHz Intel CPU, but that server died. It's been replaced by a box with two 2.4 GHz Xeon CPUs and 5 GB of RAM that's running Ubuntu 11.04 natively, and Windows is running as a VirtualBox guest. 2GB of RAM has been dedicated to the Windows guest.Of course, these old Xeon CPUs don't have the VT-x extensions, so I wouldn't expect to be able to add CPUs to the VirtualBox guest, but the Filemaker database is running at least 2-3x slower than it did on the old server. I would expect that utilizing one 2.4GHz CPU out of four available shouldn't result in such an astounding difference.
I would also like to be able to continue using this setup, since it would also mean we'd be able to remove our Linux server from the rack, which is running on even slower hardware (not that the system requirements are high for its job though).So my question is: Why is this so slow? Is there anything I can do to change the situation? Or should I just give up now and find more suitable hardware?I understand that the "new" machine should be about 1% slower in theory, so please don't tell me this "should" be fine. I need more concrete answers (as in, "I've tried this before and you should do X") since in the real world, it appears to be about 50% slower. I'm about to blame "virtual" CPUs to multithreading on single core processors, and possibly the difference in CPU architecture between Xeon and Pentium 4 CPUs.
View 3 Replies
View Related
Jan 28, 2010
Debian lenny, old install (I've upgraded to lenny when it was just about to become the stable release), versus windows 7, fresh install.Comparing browsers speeds with numion.com/Stopwatch.html, I had results such as:Iceweasel (firefox) on linux: from 9.154 seconds to 21:860 seconds (the same webpage, reloaded)Firefox on windows: 4.32 seconds - and never much slower than thatThe fastest browser on linux was Opera, ranging from 8.562 to 5.503 secs to load the same page, but even internet explorer beat/match it with its timing of about five seconds.
I have not other browsers on windows; on linux there is aroraonqueror (KDE3), kazehakase, chrome, and dillo, besides text browsers. I didn't test on dillo; Kazehakase and chrome were the only ones which had nearly decent results, but still very bad, 11 to 13 seconds for chrome, and 21 for kazehakase. Konqueror just seemed to never finish to load the page, I gave up when it was still loading somethingfter nutes and 5 seconds.'ve emptied the cache every time I would test, and I was running almost only the browsers and not much else. Whatever comes by default on windows, and on linux, I was on openbox, with nothing much going on I guess, I think the most memory consuming processthe time, besides xorg and the browsers themselves, was dictd.
I've researched a little bit about, but not enough to make a list of possible things to change in order to improve the speed on linux. Most of the time there are people just agreeing that on windows the rendering is faster, and other people saying that with them is the opposite, with some minor variations like people saying that linux is faster for plain downloads while windows is faster for web browsing due to better graphics.
(by the way; I haven't installed any graphic card driver on windows, which is still running on 1024x768, while linux runs on 1280x1024, with the "nv" generic driver, without fancy options, not supported by my old card) The closest to a suggestion of possible solutions was someone saying tha compilation may affect performance, I guess it was both about kernel compilation, and the web browsers themselves.I'll google a bit more about how to "compile for speed", both kernels and programs (maybe the x server
View 4 Replies
View Related
Feb 17, 2011
Im running Ubuntu and wants to install Windows 7 on my VM ware. how do i know if i have 32 or 64 bit?
View 2 Replies
View Related
Mar 17, 2010
i ahve to boot it from the command like an executable but i dont know how to exactly and when i thought i had it figured out i didnt know how to write the name of the file in the disk ubuntu just kept saying file or directory not found
View 14 Replies
View Related
Jul 15, 2010
I have a friend of mines computer that is hosed and gets the BSOD. He has pictures of his grandson on there that her really needs before I fix it. Is there a way to mount the main windows partition while running the Live CD? I have tried it and get an error but I am not able to get it working. Does anyone else know any other tricks I can do to help get my friends pictures of his grandson off there?
View 7 Replies
View Related
Apr 23, 2011
I am in the process of running some benchmark tests on a variety of RDBMS, I am testing three different client operating systems.Would it be terrible to partition the HDD and install Ubuntu, Windows 7 and Solaris 10? If I do not do this, I will likely have to re-install the O.S numerous times due to changes in the database server o.s as well. The same question goes for the server; would it drastically effect the performance to install 3 server o.s on one server?
View 4 Replies
View Related
