I am trying to play some .avi files and they open and run, but only the sound works properly. The video screen will flash about every 4-5 seconds.
I've tried Totem and Gnome MPlayer and both play these files the same.
while amarok plays, a small window similar to a file copying status window opens and closes on continuously its own. anyone else having a similar problem?
View 1 Replies View RelatedOut of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds
I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
This is my sons Asus eee pc 1005peb ( have one exactly like it and never happened to me)
The screen flashes on bootup and makes it very hard if not impossible to login and the gnome menu at the top is gone too. I do not know what he did to it. But I am loading meego on it now.
my screen flashes when I load anything. am I frying my vid card?
View 2 Replies View RelatedWhen I load Ubuntu, it goes to the desktop screen, shows my desktop picture, loads Pidgin which I have set to start on startup, loads Icons, and then the screen goes black. The mouse cursor shows up, I can move it around, and then it goes black again, and the mouse cursor shows up again. This repeats a few times until the cursor freezes. This started happening after I tried fixing a bug with new drivers for my Intel 845gl video card. The instructions I followed are these:
Code:
To use the available fix, run the following commands:
pt-add-repository ppa:glasen/855gm-fix
apt-add-repository ppa:brian-rogers/graphics-fixes
apt-add-repository ppa:glasen/intel-driver
aptitude update
aptitude install linux 855gm-fix-dkms
aptitude dist-upgrade
,taken from here.
I have tried some of the options in recovery mode from GRUB menu, none really work, except booting with default graphic configuration, or something similar like this.
Whenever I try to change desktop effects to anything other than none, a window appears saying 'Searching for driver' then the screen flashes and it says effects could not be enabled. Here's the output from System Testing Compiz test: Gathering information about your system. Distribution: Ubuntu 10.10 Desktop environment: GNOME Graphics chip: ATI Technologies Inc M96 [Mobility Radeon HD 4650] Driver in use: fglrx Rendering method: None Checking if it's possible to run Compiz on your system. [SKIP] Checking for hardware/setup problems [SKIP] At least one check had to be skipped: Error: No rendering method in use (AIGLX, Xgl or Nvidia).
View 2 Replies View RelatedI have a Dell Inspiron 5150 which I first upgraded 'over-the-air' to Narwhal. This completed with no errors. After reboot, the screen momentarily displays some icons before reverting to the background - this loops round every few seconds.I've subsequently tried installing with the CD which runs through with no errors, but does the same thing when it's finished - blink... blink... blink...
View 2 Replies View RelatedI upgraded from fedora 6 to fc10 using a net-inst iso. Everything went great however when I rebooted gnome wouldn't start up and there were other error messages, however thats not my current question. I figured id login as root, I put my pw in and the screen briefly flashes and then back to login prompt. The flash is a message saying something about no shell. Same occurs when trying to logon to my main user account. I can boot to single user and see that all my partitions are there and the data is there. My password file has the shell at the end of the entries.
View 1 Replies View RelatedI was running Fedora 10 I belive- no issues - did an update to 12 via DVD and now the screen continuously flashes... I see posts about Nvidia issues - but this laptop uses ATI based on HP's website.
View 6 Replies View RelatedI just installed Ubuntu 10.04 on an old Compaq desktop, and after working on it for a while, screen randomly turns blank, usually with flashing horizontal white lines. Can anyone help? Someone already told me to try memtest, which I already performed, but nothing happened.
View 9 Replies View RelatedI installed 10.10 of the live boot CD. It said everything went fine, now when I go to boot into Linux it just flashes the underscore on a black screen. What do I do from here?
View 1 Replies View RelatedUbuntu 9.04 works fine, I have just installed Ubuntu 10.04 Lucid Lynx without problems, it runs fine but after a while the screen starts flashing and the only way out is to reboot with ctrl-alt-del. First of all I get a pale purple screen with blocks of random colour in the middle then it goes on to flashing between two screens. In one the top half of the screen is vertical black and white stripes and the bottom half is black, in the other it is a terminal screen with this distributed across it:
Starting common Unix printing system cupsed
Pulse Audio configured for per-user-sessions
Enabling additional executable binary formats binfmt support
Checking battery state
On the latest occasion the text was "could not write bytes: Broken pipe" repeated all over the screen, followed by "checking battery state".
I have just finished updating my older box from 8.10 to 9.04 and installing a bunch of programs. I had shut it down several times between sessions but when I unplugged it and moved it, it fails. It goes fine through the BIOS and GRUB (I think) but then when there is a screen of text it flashes to black several times and then displays a screen that looks like static with "Ubuntu" barely visible in several places.
View 8 Replies View RelatedI have been using Debian for three or so years now. Not sure what all the difference it makes, but I'm installing Debian Squeeze on a Sony Vaio desktop computer... With an nVidia GeForce 5200 which works perfectly in other computers and on the same computer when dual booting with Windows XP. I've tried and installed several times already to no avail. When I fresh install just the standard system, no graphic desktop, no Xorg, no servers, no nothing, just the standard system, command line only. When I do the initial boot on this blessed computer, part way through the boot process my monitor shuts off and it says frequency out of range (thats a message from the monitor itself, not the computer or debian).
The same install process I've executed countless times. I thought it was a dependency issue, problem with X perhaps. I can install lenny, but not squeeze. When booting in single user mode, it seems like it craps out either during or right after it loads or does something with the "drm" - you know how during the boot script, the machine "flashes" the fonts and the screen blips... its seems to me like that's where its happening at. The monitor works just fine, I really don't think that's the problem. But it is frustrating and I have no clue where to go about finding what the issue is if I can't see whats going on.
I'm experiencing a sudden black flash before video play back with VLC. The whole 3 screens just flash black and come back, and then the video plays fine in VLC. This doesn't happen with other media players, such as mPlayer and Totem.
I'm running an XFX Radeon 5450 (ATi) with the propriety 10.7 drivers. Running 3 17" (1280x1024) in "EyeFinity". I've had a look on the unofficial bug thingy for ati drivers for linux, and there is a bug back from 2008.[URL]...
Just wondering if anyone has any ideas, of tips to start looking to try and solve my little issue, I've spent hours and hours looking though xorg, syslog and other logs in /var/log/ and nothing seems to stand out.
I'm running Ubuntu 10.10 which I recently installed on this emachines w3107. For some reason, while doing whatever I may be doing, my screen will flash off and on for about a minute, then when it stops flashing; there is no mouse pointer visible. I can still use the mouse, but it's ghost-like.
View 1 Replies View RelatedI don't really have any Linux experience. But I wanted to try it out. Now I'm afraid I did not set this up properly. Grub gives me 3 options:
Fedora (2.6.38.8-32.fc15.x86_64)
Fedora (2.6.38.8-26.rc1.fc15.x86_64)
Other
When I select <Other> to boot into windows... it starts to try to boot... but then flashes a quick blue screen & restarts. I tried to boot into Window's normal mode, safe mode, and command line... all just restart fdisk -l gives the following:
[Code]....
I am having some weird problem with the firefox based flash player when playing videos in full screen. The video flashes white in areas while the video is playing. I don't know if this is Ubuntu, Firefox or flash. I am running Lucid on a Macbook Pro
View 1 Replies View RelatedI have been running Ubuntu 9.04 for the past year. Tonight decided to upgrade to 9.10 thru update manager. Every thing regarding the install seemed fine until the request to restart the computer. I hit the restart and it will not boot up. Computer goes thru the normal restart screens.
Screen flashes with bios info--no hard drive detected, then proceeds to show booting from hd, then loads grub stage 1.5 (not grub 2)and screen goes blank.
I have installed suse 9.2 linux version. Now I am not able play avseq.dat file in vcd/dvd format.
View 1 Replies View RelatedAfter tweeking some graphics settings, and replacing some hardware, ubuntu won't boot. Being left in the X session (CTRL + ALT + f7), it's what looks like a log:
[Code]....
^ and that's where it hangs. So I went into ctrl alt f1, and logged in with my user/pass, and did the command: startx the screen flashes, and brings me back to a failed to open devices report.
[Code]....
I tried re-installing GDM, but turns out that the PC isn't actually online, hence unable to install GDM after uninstallation. So I downloaded the gdm .deb, and tried to install it from a USB flash drive, but I get dependency errors. I'm at a loss here, I could really use some help, this is the PC that has all my data on it, 450 GB +, I'd love to not have to transfer that over to a new installation!
I rip the DVDs that I own to my hard disk using a straight-up 1:1 copy, ie to an ISO image. This works great usually, but for this specific DVD that I'm presently trying to rip, I'm being told that the DVD is literally 64GB in size. It's definitely not a BluRay disc, and I don't even have a BluRay drive, so that possibility is ruled out.
I'm not having any problems playing back the DVD file in VLC. I'm running Ubuntu 10.04 64bit. How on earth could it be a 64GB DVD?!? Isn't the max capacity of a DVD around 8 gigabytes? I don't even think that BluRay discs hold 64GB of data!
[Code]...
I am using ubuntu 8.04. I played an mp3 in totem & meanwhile moved that file to another location. Still I can move slider in totem to rewind or forward the song. Only after the song has been played completely I get message 'location not found'. Does that mean totem copies song into RAM so that it does not have to trouble hard disk for access during entire duration ?
View 2 Replies View RelatedI want to know the steps involved in playing an audio file from music player to the speaker.
View 3 Replies View RelatedI have a windows 7 computer running Xming 6.9.0.31. I connect to my linux box running Ubuntu Server 9.10 with plink and run urxvt. It starts up and works perfectly however the urxvt screen flashes the xming root window about twice a second.This makes urxvt impossible to work with.Everything else that I have tested over the ssh connection (xterm, xfce4-terminal, etc) work perfectly with no flashing and this same problem has happened with two other linux installations (again only with urxvt)
View 1 Replies View RelatedDuring idle moments the last two evenings I thought I would try out Mahjong on my laptop. At first it worked ok then on the subsequent games it blanks my laptop screen after say 10mins and I have to reboot. I am using the updated Jessie. Is this a screen burnout?? My display in "settings" is showing unknown
Correction it now blanks using Iceweasel too
I've been using Ubuntu 10.04 for about a month and generally the graphics work fine (I have a Radeon 2600 XT graphics card and have installed Catalyst Control Centre 10.7).3D games such as Nexuiz work fine and I can generally play different types of video but when I try to play HD video it gets pretty jerky. The same files play fine in windows so I'm guessing it's a software/driver issue. I've read various related posts to this and after typing 'top' into the terminal, I can see that playing the video takes most of the CPU processing resource up, which I as I understand, suggests that most of the work is not being offloaded to the GPU.
View 4 Replies View RelatedLast week I had a total screen lock-up, which I overcame by rebooting using the reset button. At the time I was playing solitaire (sad, I know!), while listening to a vinyl LP, the setup being turntable > preamp > line- in socket, and running JACK Audio Connection Kit. No other apps were running, but I had played several LP's before the lock-up occurred. I have 1GB of memory installed, but could it have become overloaded playing the LP's, and thereby caused the lock-up? I'm running 10.10
View 7 Replies View Relatedi have a intel video card (laptop)when i try to watch movie, i get a blackscreen..... but i listen the soundMPlayer2 2.0 (C) 2000-2011 MPlayer Team
Playing_game.avi.
Detected file format: AVI format (libavformat)
[lavf] stream 0: video (mpeg4), -vid 0
[code]...