We are using RHEL 4 and sendmail version -8.13.8-2. We are using sendmail service for mail transcation. But we are not able to mail from terminal.Quote:
[systems@localhost ~]$ echo hello|mail -s "Hi dere" systems@localhost
[systems@localhost ~]$ collect: Cannot write ./dfo4M8OIMh014372 (bfcommit, uid=5 14, gid=51): Permission denied
[code]...
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View RelatedI have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
I have questions about mail,
I am using following command on my linux account of my compnay
mail -s 'Hi' username@gmail.com
But I dont receive any emails, where as did not receive any error while executing the above command, so whats going on and what is happening.
what email id do mail use to send the email by default. Is there any way or command to print this by default user id.
I have sendmail running in system,i want to send mail to other accounts like gmail,yahoo using this sendmail.What should i do ?
View 1 Replies View RelatedI ran a simple command "mail" on my Suse Linux 11.1 box and it's display "/var/mail/john: Permission denied" I had two users, john and peter When I login as peter and ran "mail" it display the same error when I login as john
"/var/mail/john: Permission denied"
I'm using postfix as my MTA. Here's the output from the command ls -l /var/mail
lrwxrwxrwx 1 root root 10 2011-08-06 11:54 /var/mail -> spool/mail
Here's the out output when I run echo $MAIL
/var/mail/john
I login with different user and run echo $MAIL it output the same line /var/mail/john
configure sendmail to route mail to specific hosts?
View 2 Replies View RelatedJust upgraded to F15 and I cannot seem to get the sendmail service starting at boot time.It starts and works just fine by hand after boot, so there's nothing wrong with the sendmail
configuration itself."runlevel" shows a current run level of 5 and "chkconfig" shows sendmail on for run level 5.All the other mail service (mailman, clamd, etc.) start fine.Doing "service sendmail start" after boot gets everything up and running just fine, but itsure would be nice to have it run at boot like it used to
i have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain ([URL]), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message.
For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that doens not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example), so please tell me what do i do to get the mail.
How to send mail using sendmail on slackware? Can you show me a simple bash program that sends a message to an email? I am new to slackware and I can't send my email using sendmail command. I checked my mail queue on my Webmin and i see this status "access map: lookup [URL]..
View 9 Replies View RelatedI have an application form (it's currently residing at [url] that needs to send an email to me.
I've installed sendmail and enabled it in /etc/php5/apache2/php.ini using the
Code:
When I run mailq, I get errors such as
Code:
Sendmail is flat-out refusing to work on external domains. How the heck can I get this working?
The PHP is below.
Code:
I run a CentOS server and would like to put a disclaimer message on every email that is send through that sendmail server.
View 1 Replies View RelatedWe have moved from a Windows based SMTP server to Sendmail on Cent 5.5. We have a special application that was written to look at the "BadMail" folder on the Windows box. I am told by my developers that it is capable of monitor remote locations and they just need to know the format or extension of the badmail files.
My question is what is the default location of the badmail folder in Sendmail? This is a default install from CentOS.
We have a application hosted in our server and it uses send mail for sending and receiving mails.mails can able to reach certain ids but it cant reach some ids. this is the log entry.
Jan 6 00:52:18 p2234270 sendmail[11009]: p046hWi5011897: to=<dinesh@heatstream.com>, ctladdr=<apache@p2234270.pubip.serverbeach.com> (48/48), delay=2+00:08:46, xdelay=00:00:01, mailer=esmtp,
pri=4530999, relay=smtp17.msoutlookonline.net. [64.78.22.100], dsn=4.1.8, stat=Deferred: 450 4.1.8
[code]....
I have sendmail setup on my server but for some reason the following command does not send me an email: echo "test" | mail -s testsubject xyz@gmail.com
however in my crontab i have MAILTO="anemail@anemail.com" and it that is pumping out emails.
I am running this on an AmazonEC2 machine running Fedora Core 8.
I have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain (mydomain.com), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message. For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that does not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example) comming from gmail.
View 3 Replies View Relatedsetup a mail server using sendmail on Redhat 5/Centos 5.
View 3 Replies View RelatedSo I'm having troubles setting up a mail server. First of all, anyone want to try to telnet into <snip> on port 25 and see if it's blocked? I don't think it is, but you never know. How long does it usually take for MX records to get around? I've had this set up for about a day now and still don't see any MX records on any lookup site I go to. I'm currently using slackware 12.2's default sendmail configuration. Should I change anything? I started sendmail on my laptop and got emails going within the LAN but I cannot send emails over WAN (i.e. to/from yahoo or google accounts).e?
View 14 Replies View RelatedI would like to send the logfiles and the CallDetailRecording-files of my Asterisk-server weekly to my email-address.
But I'm having some issues...
This is the command I would use in a script :
I am using CentOS and sending mail through php mail function. It is taking too much time to send a mail.
View 3 Replies View RelatedI am facing a problem while configuring a sendmail AS MY MTA.My problem is when is try to send mail from root to local user account(Any user existing in my local machine) , i m getting a unknown user error but normal users can successfully send a mail to root but root account does not.I can successfully compile a sendmail.mc without any error and sendmail deamons start successfully.When I Try to send mail from root account to local user Account , i got a Returned mail:see transcript for detail (which Has A following Detail )
View 5 Replies View Relatedi have fedora5 installed on my machine MACH1, which acts as a linux server for few machines. Its over network and we have a dedicated mail server too which is globally accessible. I wanted to set up a local mail server on MACH1, so that i shall be able to send/receive mails from all the users as well as to our other global mail server(on internet).
View 3 Replies View RelatedI have configured Sendmail client to send mail to outside network ( Within local domain ), but i am unable to send any mail as i am getting the following error,
[root@cclx10 mail]# cat test |sendmail -v abhilash-o.padmanabhan@hp.com
abhilash-o.padmanabhan@hp.com... Connecting to [127.0.0.1] via relay...
abhilash-o.padmanabhan@hp.com... Deferred: Connection refused by [127.0.0.1]
I have the following configuration in my "/etc/sendmail.cf" file
# SMTP daemon options
O DaemonPortOptions=Port=smtp,Addr=15.146.237.113, Name=MTA
And netstat is showing that sendmail is listening on Port 25 on the IP address which is mentioned.
[root@cclx10 mail]# netstat -an |grep 25
tcp 0 0 15.146.237.113:25831 0.0.0.0:* LISTEN
tcp 0 0 15.146.237.113:25 0.0.0.0:* LISTEN
It has been years since I had to mess with sendmail (I prefer using postfix) - but I inherited a server that someone else configured. This machine is a webserver - but is running sendmail for the various webforms, etc. I want to configure sendmail on this machine to route ALL outgoing messages to the main email server. This means local users too. I have read through sendmail configurations for the past 3 hours, but it's mostly greek. Here is my current sendmail.mc file - could some kind soul tell me what I need to change (and WHERE)?
[code]...
i'm having a hard time to configure sendmail or fetchmail, so that i can send email from a CentOS 5.3 server, is anyone familiar with that? i have a second email server that i believe that Centos server can authenticate to in order to use as relay but i have no clue how to accomplish that.
View 3 Replies View RelatedHave tried to setup email aliases in sendmail so I can have multiple address pointing to one linux login. However none of the aliases seem to be accepting mail.
I get the following error message when trying to send to them.
I have tried restarting sendmail, have mapped the /etc/mail/virtusertable across to virtusertable.db with the following command.
Code:
Output of sendmail -bv is as follows and looks correct.
Code:
Have also added new domain into local-host-names file. I am stuck on what is left to check and why the messages are getting bounced back.
I recently built a mail server with Slackware/Sendmail and basically all works. Mail comes in and goes out. The problem I have is 3 email addresses cannot be sent to from this server. The remote ends are 3 different servers but all run Exim 4.69. I have logged the server exchange and this is what I get: (names have been changed to protect the innocent!!)
[Code].....
I want to know is it possible in Sendmail to restrict some users from sending / receiving mail to / from outside world i.e. they should be able to send and receive mails only from local domain.
View 4 Replies View RelatedI am trying to configure sendmail to use GMail to send emails. I followed the instructions at[URL]lay-howto.html but it failed.After I was done with these instructions, I think I "cooked" sendmail... Can no longer configure it and it seems that I will have to start from scratch again...How to get sendmail to send emails using Gmail's SMTP server?
View 12 Replies View RelatedI'm going crazy with this one. For whatever reason, sendmail will not authorize any users. I've tried multiple logins (all with good credentials) but still get login fail, ie (FYI this is a sendmail/MailScanner setup if it makes any difference):
220 hostname.net ESMTP Sendmail 8.13.8/8.13.8; Fri, 19 Nov 2010 12:07:08 -0600
ehlo hostname.net
250-hostname.net Hello testdomain.com [123.123.123.123], pleased to meet you
[code]....