I have sendmail setup on my server but for some reason the following command does not send me an email: echo "test" | mail -s testsubject xyz@gmail.com
however in my crontab i have MAILTO="anemail@anemail.com" and it that is pumping out emails.
I am running this on an AmazonEC2 machine running Fedora Core 8.
I have been trying to set up ssmtp so I can send email using Gmail's ssmtp servers. However, when I try to send mail (using mailx), I get the following message:
Code:
Can't send mail: sendmail process failed
Here's the last line from dmesg (the only one applicable, according to the timestamps and message content):
Code:
[484114.608378] sendmail[17975]: segfault at 0 ip b7dbbbf3 sp bfb0dc4c error 4 in libc-2.11.2.so[b7d44000+14e000]
Here's my ssmtp.conf:
Code:
#
# /etc/ssmtp.conf -- a config file for sSMTP sendmail.
#
[code].....
I had configured sendmail on linux 5.2, Iam using public ip and my domain is registered[linuxforfreshers.info]. I am facing a issue that when I mail with the user sumit@linuxforfreshers.info then I am able to do it. But if somebody tries to send mail to the same user then it bounce backs. I had made the entry of domain in /etc/mail/local-host-name and also I put ok in /etc/mail/access.The mails are working properly with in LAN. But not able to work on WAN only I can send mail but not able to recieve mail.What else I need to do.
View 6 Replies View Relatedi have running sendmail 8.13 on my red hat enterprise linux 5.1, but i have a problem. I can send a mail from my line command terminal to hotmail, gmail, yahoo and any of these, but i can't send mail to my own domain ([URL]), when i wrote a mail i get a reply from MAILER-DAEMON@localhost.localdomain that says that the message had pemanent fatal errors and shows as user unknown the mail was suposed to recive the message.
For example, if i send one mail from user1@mydomain.com to user2@mydomain.com the user2 does not recive any mail, but that doens not happens if user1 sends a mail to any hotmail address or gmail or any other. Besides i also can't recive on my server any mail to user1@mydomain.com or user2@mydomain.com (for example), so please tell me what do i do to get the mail.
How to send mail using sendmail on slackware? Can you show me a simple bash program that sends a message to an email? I am new to slackware and I can't send my email using sendmail command. I checked my mail queue on my Webmin and i see this status "access map: lookup [URL]..
View 9 Replies View RelatedI would like to send the logfiles and the CallDetailRecording-files of my Asterisk-server weekly to my email-address.
But I'm having some issues...
This is the command I would use in a script :
I have configured Sendmail client to send mail to outside network ( Within local domain ), but i am unable to send any mail as i am getting the following error,
[root@cclx10 mail]# cat test |sendmail -v abhilash-o.padmanabhan@hp.com
abhilash-o.padmanabhan@hp.com... Connecting to [127.0.0.1] via relay...
abhilash-o.padmanabhan@hp.com... Deferred: Connection refused by [127.0.0.1]
I have the following configuration in my "/etc/sendmail.cf" file
# SMTP daemon options
O DaemonPortOptions=Port=smtp,Addr=15.146.237.113, Name=MTA
And netstat is showing that sendmail is listening on Port 25 on the IP address which is mentioned.
[root@cclx10 mail]# netstat -an |grep 25
tcp 0 0 15.146.237.113:25831 0.0.0.0:* LISTEN
tcp 0 0 15.146.237.113:25 0.0.0.0:* LISTEN
I am trying to configure sendmail to use GMail to send emails. I followed the instructions at[URL]lay-howto.html but it failed.After I was done with these instructions, I think I "cooked" sendmail... Can no longer configure it and it seems that I will have to start from scratch again...How to get sendmail to send emails using Gmail's SMTP server?
View 12 Replies View RelatedI'm trying to setup notification function for the Nagios Core which use Mail to send notification.I got an account from Rogers. I have SMTP server, email account with authentication information.My Nagios server is in a workgroup, there is now domain assigned to it, I just use nagiosserver.localdomain in /etc/hosts.I added Rogers SMTP server in /etc/mail/sendmail.mc and Future (AuthInfo) I created an /etc/mail/AuthInfo and add AuthoInfo:smtpserver "U:user" " P: pwd" "M:Plain"I added smtp server in /etc/mail/access for RelayI added root@nagiosserver.localdomain on /etc/mail/virtusertableI regenerated sendmail.cf by user m4 commandrestart sendmail service.When I ran: Mial -s test nagios4ccs@rogers.comIt did not prompt any error message , in the maillog it says the message is queued but It can not be sent out
View 3 Replies View Relatedthe sendmail packages on my f15 server were updated from 8.14.4-20 to 8.14.5-1 yesterday. since then, every attempt to send mail via a smart relay have failed with :
Jun 25 14:05:10 server sendmail[23512]: p5PD59jr023512: from=root, size=208, class=0, nrcpts=1, msgid=<201106251305.p5PD59jr023512@server.{fromdom ain}>, relay=root@localhost
Jun 25 14:05:10 server sendmail[23513]: p5PD5A8l023513: from=<root@server.{fromdomain}>, size=480,
[code]....
i've tried using various different smtp relays and they all now throw the same error. without going through all my sendmail config, i have the following entries in /etc/mail/sendmail.mc :
define(`SMART_HOST', `{smtp server}')dnl
FEATURE(`authinfo', `hash /etc/mail/authinfo')dnl
and the /etc/mail/authinfo file contains :
AuthInfo:{incoming mail server} "U:{user}" "P:{password}"
I'm currently running Ubuntu 10.10 Server using VirtualBox 3.2.12 r68302. I've setup a LAMP Server and Installed Redmine and I'm going to be starting some projects. The problem I have is that I've linked it to a subdomain thru my hosting, so things are a little more complex for me then usual. Here's the software I've added for this setup:
Ruby version 1.8.7 (i686-linux)
RubyGems version 1.3.7
Rack version 1.1
[code]...
how mail server functionality works as well as how to properly set the host of the virtual pc.
I try to configure nagios server in my network. In nagios server I need to configure sendmail rely agent. I configured sendmail like given below
Code:
dnl #DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
define(`SMART_HOST', `mail.mydomain.com')dnl
define(`RELAY_MAILER_ARGS', `TCP $h 25')dnl
define(`ESMTP_MAILER_ARGS', `TCP $h 25')dnl
[code].....
How to restrict some uses to send mail to outside domains except local in sendmail.I am using ( CentOS5 + Sendmail )
View 2 Replies View RelatedI've been having this problem since 10.6 released, but have until now been successful with the "just use Thunderbird" response. My sendmail server hasn't been changed, but as clients upgrade from OSX 10.5 to 10.6 suddenly mail.app will no longer connects to send SMTP messages through the server. (IMAP connections to the same server using the same user/pass combinations work perfectly) When I look at the logs, things basically stop right after the STARTTLS command.
Google indicates alot of people are having similar problems, but I'm not seeing any solutions. Do any of you administrate sendmail servers where some of your clients are using Apple's Mail.app on Snow Leopard, and if so what settings are you using? At this point, I'm happy to make changes to the server to accommodate Apple's issue, I have too many Mac users connecting to my server. I just can't figure out what to change. I've enabled virtually every possible login authentication combination, and none of them work.
i want to send mail from unix mail command to my yahoo-id with attachment, but i want to receive it as attachment.
View 1 Replies View RelatedI'm running SUSE linux Server version 11. I want to configure mail server with postfix & cyrus-imap. For that, i have read many documents in Internet by i met issues. I'm running DNS in this server & it's ok Now I cannont send mail through command line.
[Code]....
I have questions about mail,
I am using following command on my linux account of my compnay
mail -s 'Hi' username@gmail.com
But I dont receive any emails, where as did not receive any error while executing the above command, so whats going on and what is happening.
what email id do mail use to send the email by default. Is there any way or command to print this by default user id.
I'm an Oracle DBA and started working for my current employer about 4 months ago. This past weekend an alert re: FS space brought my attention to /var/spool/clientmqueue (full of mail re: cron jobs) and the fact that sendmail is not running on our Linux servers.I'm told that the IT security team deemed sendmail too vulnerable so we don't run it.Aside from FS filling up and missing notification of issues with crontab entries, I'm concerned that we may be missing notification of potential issues. In other Unix/Linux environments I've seen emails from the print daemon when it experienced problems with specific jobs.
Are there other Linux facilities aside from cron and lpd that use email to advise the users of possible issues? Are there ways to secure sendmail or secure alternatives to sendmail? My primary need/desire is to make sure that emails regarding issues on the server get to the appropriate users. Secondary goal would be to have the ability to use mailx to send mail out. There is No need/desire to receive mail from outside.
I have users [URL] unable to send email to [URL]. [URL] user also unable to send email to [URL]. But both email addresses are fine as they can receive email from others or from [URL] and [URL]. I able to telnet mail server 110 and 25, no problem. Version: ESMTP Sendmail 8.12.10
Mail Log:
Feb 23 11:36:35 mail sendmail[16228]: o1N3aZxt016215: to=<xxx1@gas.com>, ctladdr=<xxx@abc.com> (501/501), delay=00:00:00, xdelay=00:00:00, mailer=esmtp, pri=442918, relay=gas.com, dsn=5.1.2, stat=Host unknown (Name server: gas.com: no data known)
[code]....
I have an issue with sendmail. I need to configure sendmail to send email from command prompt to any domain. This is just for the notification purpose. I installed sendmail and sendmail-cf and sm-client. The following are the configuration I have done.
/etc/mail/sendmail.mc
1) dnl # DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA')dnl
2) m4 /etc/mail/sendmail.mc > /etc/mail/sendmail.cf
3) /etc/hosts = 127.0.0.1 localhost.localdomain
/etc/hosts = 192.168.2.50 mysystem
4) /etc/hosts.allow = sendmail:ALL
[Code].....
I am trying to send e-mail from command line by using "mail" in fedora. It goes to e-mail server in the same network but it is refused by other outside this network with message: "..... Connection refused by name@yahoo.com ......
View 1 Replies View RelatedI ran this command from terminal.
Code: Select allmail -s "Test Subject" example@yahoo.com < /dev/null
Got error on command line:
Code: Select allsend-mail: Authorization failed (534 5.7.14 https://support.google.com/mail/answer/78754 ng13sm2265977pdb.82 - gsmtp)
ssmtp configuration file:
Code: Select allroot=ssmtpmailtesting@gmail.com
mailhub=smtp.gmail.com:587
#rewriteDomain=
hostname=mybox
UseSTARTTLS=YES
AuthUser=ssmtpmailtesting@gmail.com
AuthPass=[mypassword]
FromLineOverride=YES
I want to send a simple mail from my terminal
I'm using opensuse and a Know that I have postfix installed...
I don't know what I need configure first...
I know that I need a SMTP server to send e-mails write?
When I try send e-mail with the command mail I received this message :
Code:
mail -s "meeting reminder" -c professorgenival@hotmail.com micromerces@gmail.com
mailq:
Code:
(host mx4.hotmail.com [65.55.92.168] refuse to talk to me: 421 cannot conect to SMTP server.
I was reading about fetchmail But I can't understand....
Is there an easy to use program that I can use to send mail from the command line? I want to be able to create a batch script to send mail from different text files. What I'm looking for is something like:
mailapp mailserveraddress destinationmailaddress mymailaddress filetosend
I am using Ubuntu 9.10 and when I tried to send mail from the command line I get: /usr/lib/sendmail: Permission denied. any takers on this.
View 6 Replies View RelatedSend an E-mail to your local account. Try two different ways to send and read it. How can you check that it really arrived? I decided to try using the 'mail' and 'pine' commands. So:
1) Using the root account, intending to send an e-mail to myself (root):
Code:
# mail -s "Hello root!" root
Simple form of sending e-mails internally.
^D (this keystroke is to finish the e-mail)
EOT
2) Using 'pine', another e-mail client: The mail is composed correctly, with 'To:' field set to:
Quote:
[URL]
which is my hostname, as my box runs in a VMWare Slack 12.2 image. In both cases, nothing was received in my mailbox (by typing #mail)... Additionally I don't see any new e-mails when I look at the file '/var/spool/mail/root'. Do I need extra information configuring my mail client/server/service?
I'm running a desktop-less version of Debian via Sun VirtualBox. The reason I'm doing this is because I don't have enough graphics or RAM power to have a desktop environment running on top of my current desktop; also, I want to learn Linux through the command prompt. I'm running the AMD64 version of Debian; I'm not sure if that's relevant.
My main goal is to be able to email useful files from the virtual Debian to my main computer, so that I can save them for later if I ever decide to do a "real" installation of Debian on this computer. I realize now that there's probably some "easy" way to do this by reading the virtual machine's hard drive, but at this point, my curiosity wants to see this issue resolved. I started off wanting to find a command-line program to send my email with, and one was built-in. The syntax ~$ sudo mail -s "Subject" email@yahoo.com "This is a test email."
C^D
Cc:C^D ~$
is what I found. I tried it, and (unsurprisingly), it failed. I then learned that the mail command calls exim4, or something along those lines, so I needed to configure exim4. Soon thereafter, I learned that Yahoo's SMTP wasn't public, but Google's was. So, I found this web page which described how to configure exim4 to allow for email to be sent to a Gmail account. I made one, and followed the page word-for-word.
I sudo-mailled a test email to my Gmail account, and nothing happened. I waited a bit longer, and still, nothing happened. Finally, I started looking around, and found out about the exim4 logs in /var/log/exim4. In my mainlog, I think that it's telling me that Google denied my connection: <date><time><random numbers and letters> == **********.gmail.com R=send_via_gmail t=gmail_smtp defer (111): Connection refused
So, now, I'm just stuck. I don't know what I did wrong, I checked my exim4.conf.template twice for spelling errors, but I don't think I made any. At this point, I can only hope that someone else has had a similar problem, or knows what I'm doing wrong (or haven't done yet).
How can I send gpg encrypted mail automatically from the linux command line?
I'm a little stumped on this one, I've tried using mutt but it doesn't encrypt mail unless it's used interactively.
Does anyone know if you can use the build in mail command to do this some how?
how to include my command results in a script? Basically what the script does is it checks the status of a service within the linux server, then sends an email when done. I want to include the results of my status check to my mail when sent.
i.e.
service dhcp3-server status Status of DHCP server: dhcpd3 is running. <---this I want to include in the mail that is sent out via script.
How can i make a script to send the output of top command in mail.
i have to mail the output to another person , tell me how can i do this